slab frame 中文意思是什麼
slab frame
解釋
整板車架-
Based on tests of nine 1 / 2 - scaled model slabs under vertical loads, the paper analyzed load - deformation curve and proposed limit value of height - width ratio under axial loads. 2. based on aseismic tests, the paper put forward a model of concrete frame, silica brick and a combination of the two, proposed that the silica brick works as a 45 compression bar, analyzed the factors which may influence bearing capacity of the slab and advised a formula including the numbers of bays and of storeys of the frame
通過對墻板模型的抗震性能試驗研究，建立了由鋼筋混凝土框格、砌塊以及兩者協同作用三個部分組成的承載力極限狀態下的理論簡化計算模型；提出了墻板中填充塊等效斜壓桿寬度按45度計算的統一量化標準；分析了影響墻板承載力的主要影響因素，給出了表達墻板框格層數和跨數不同的斜截面承載力實用設計計算公式。 -
Because it is simple to make manufacture slab with slightly curved bottom, and is economical to use steel, and is relatively great in aspect of load bearing potential capacity, the slab often has been used as braced arch and rigid - frame arch bridges " deck slab in 1970s and 1980s
由於微彎板具有製作簡單、用鋼量省、承載潛力較大的優點，因而上世紀七、八十年代，在剛架拱橋、桁架拱橋中常用作橋面板。 -
Test showed that under level loads the damage process of multi - ribber slab was according to the order of silice bric ^ concrete frame ^ outer gimbal, released energy classificately, had perfect energy consume and anti - collapse capacity
試驗表明密肋復合墻板在水平荷載作用下破壞過程按「砌塊，框格，外框」的順序進行，能夠分級釋放能量，表現出了良好的耗能能力及抗倒塌能力。 -
Though much progress has been achieved in previous study, there still remains a lot to be studied and perfected. the thesis is devoted to study on the multi - ribbed slab wall, the main bearing member in mrss, including its mechanism, failure mode, aseismic capability, mechanical models, ultimate bearing capacity and aseismic design based on control. the paper mainly accomplished such work as follows : 1 ) based on test research on multi - ribbed slab wall, the paper proposed the member ' s failure modes under horizontal loads, analyzed the co - performance between the inner frame and the infilled silica bricks and that between the slab and the outer frame, discussed the wall ' s bearing capacity, rigidity, deformation, ductility and energy dissipation ability in different modes, and put forward a simplified mechanical model of the slab wall under vertical loads
本文針對密肋壁板結構的主要受力構件? ?密肋復合墻體為研究對象，就其受力機理、破壞模式、抗震性能、三階段力學模型、極限承載能力以及基於控制的抗震設計方法等進行了較為詳細的研究，完成的主要工作有： 1 ）通過對密肋復合墻體在水平低周反復荷載和單調荷載作用下的試驗研究，提出了墻體的主要破壞模式；分析了框格與內部填充砌塊、墻板與外框的共同工作的受力特點；探討了不同破壞模式情況下墻體的承載能力、剛度、變形、延性、耗能等抗震性能，並給出了豎向荷載作用下密肋復合墻體的簡化力學模型。 -
The wall was equaled to an elastic composite slab with silica bricks as main body and concrete rib beams, columns and outer frame as reinforcing fiber. ( 2 ) elastic - plastic stage. the wall was equaled to a rigid frame - oblique compression bar model in which concrete frame was equivalent to a rigid frame while silica brick was equivalent to a oblique compression bar
（ 1 ）彈性階段? ?將墻體視為一種以輕質砌塊為基體，混凝土肋梁、肋柱、外框為增強纖維的復合材料等效彈性板； （ 2 ）彈塑性階段? ?將墻體視為一個由鋼筋混凝土剛架和與之鉸接的砌塊等效斜壓桿組成的剛架斜壓桿組合模型； （ 3 ）破壞階段? ?將墻體視為肋梁嚴重破損的梁鉸框架模型。 -
The former consists of sandwich panel and frame structure, becoming light weighted frame slab structure. in this system the frame and the sandwich panel together resist horizontal and vertical loads
有骨架體系由夾芯板與框架結構組合而成，形成框架輕板建築，框架與夾芯板共同承受水平和垂直荷載。 -
The research object in this text is the actual project - - the mansion of yatingyuan ( 40 layers above the ground, 125. 4 meter high ). the structure - design is by satwe and the analysis of the structure dynamic characteristic and earthquake response by sap2000, whose calculation models are set up according to the actual size of the structure. in satwe, the analysis model of beam and column is simulated by frame - element, slab is plane - element, shear - wall is wall - element and slab is infinitely rigid in the internal and zero in the external ; in sap2000, beam and column is frame - element, slab and shear - wall is shell - element and slab is elastic floor
本文以實際工程項目? ?雅庭園商業中心大廈（地面以上40層，建築總高度為125 . 4米）為研究對象，結構設計採用satwe ，結構的動力特性和地震反應分析採用sap2000 。結構satwe和sap2000分析的計算模型均按結構的實際尺寸建立， satwe分析模型的樑柱採用桿元模擬，樓板用薄壁殼元模擬和剪力墻用墻元模擬，樓板平面內無限剛、平面外剛度為零； sap2000分析模型的樑柱採用桿元模擬，樓板和剪力墻用殼元模擬，樓板為彈性板。 -
Prestressed concrete slab - column structure has been widely used in long - span and multistory building. there are four commonly used analysis methods for slab - column structure, which are direct design method, equivalent frame method, plasticity method and finite element method
預應力混凝土板柱結構在大開間的多層及高層建築中得到了廣泛的應用，其設計方法有直接設計法、等代框架法、塑性分析法和有限元法等多種方法。 -
For the first time, based on frame structure with large thick raft plinth and many engineering examples, analytic method of interaction that means the analysis on three parts above as a whole with a full consideration of interaction thereof that met the need of the deformation correspond on the boundary was used to research on the interaction of structure and groundsill in this paper. and five models were adopted, which were : ( 1 ) a tube with symmetrical double - axis structure and symmetrical loads, ( 2 ) two tubes with symmetrical double - axis structure and symmetrical loads, and ( 3 ) a tube with symmetrical single - axis structure and symmetrical loads, and ( 4 ) two tubes with symmetrical double - axis structure and unsymmetrical loads, and ( 5 ) two tubes with unsymmetrical structure and loads. based on the middle - thick slab theory from mindli and the model for groundsill from winkle, the deformation character of raft foundation and the distributing rule for resisting force of fundus were studied in details by using b ig - style fem ( finite element member ) software, ansys
本文結合了大量的工程實例，以大底盤框架厚筏結構形式為研究對象，針對單個和多個塔樓布置於同一個大底盤框架厚筏基上的復雜結構體系，分（ 1 ）一個塔樓：結構布置雙軸對稱，荷載對稱的情況； （ 2 ）兩個塔樓：結構布置雙軸對稱，荷載對稱的情況； （ 3 ）一個塔樓：結構布置單軸對稱，荷載對稱的情? ； （ 4 ）兩個塔樓：結構布置雙軸對稱，荷載不對稱的情況； （ 5 ）兩個塔樓：結構布置和荷載均不對稱的情況等五種組合情況，全面系統地探討了上部結構?基礎?地基相互作用的大跨度基礎、基礎板變形特徵及其基底反力的分佈規律。 -
By using the calculating method of the flat - plate floor, the bend moments of the slab in different place are calculated. the moment distribution ratio between the column trip and the middle trip of the cast - in - place reinforced concrete hollow flat - plate floor calculated by the equivalent frame method is demonstrated. the moment of the cast - in - place reinforced concrete hollow flat - plate floor calculated by the experience coefficient method is also demonstrated
進而將無梁樓蓋體系的計算方法應用於現澆空心板無梁樓蓋中，通過對板格彎矩的分析，得出了現澆空心板無梁樓蓋按等效框架法計算的板帶彎矩分配比例系數，按經驗系數法計算的板帶彎矩設計值。 -
This paper mainly researches dilapidation condition of beam, slab and column, distributing and size of crack, joint of beam and column, joint of beam and slab, the load distributing condition of beam, sheet and column through general investigation of beam, broad and column, accessorial system, maintenance structure of frame structure of someone workshop
首先，對廠房框架結構的梁、板、柱、附屬系統、圍護結構等進行調查，主要調查了梁、板、柱的裂縫及其他破損情況、梁與柱及梁與板的連接，廠房平臺的荷載分佈情況。 -
The two ways stiffness ratio of the reinforced concrete hollow slab is studied and the results show the reinforced concrete hollow slab is bent in two ways under the vertical loads providing the length of the two rims of the slab are near. the analysis for the concealed wide - flat beams demonstrates that it belongs to the column strip and it does not possess the function of the frame girder
本文首先從理論上分析了空心板兩方向剛度比，認為兩邊長接近的空心板在豎向荷載作用下為雙向受彎，其受力性能為雙向板；分析了柱上暗扁梁在樓蓋中的作用，認為它不能起到框架梁的作用，應為柱上板帶的一部分。 -
The paper probed the applying of multi - ribbed slab with outer light frame structure ( mrsolfs ) to the upper structure of buildings with commodious space at the bottom and the feasibility of replacing lfswsums with frame - supported multi - ribbed composite slab structure ( fsmrcss ). firstly, the paper carried out test study base on the pseudo - static test under horizontal loads on four two - spanned model members of fsmrcss, including three 1 / 2 - scaled two - storeyed models and one 1 / 3 - scaled three - storeyed model. by the test study, the paper analyzed the test results, including analysis on mechanical property of the constructure under vertical loads, and failure mode, deformation capacity, aseismic performance under horizontal loads and constant vertical loads
本文首先對三個兩跨兩層和一個兩跨三層的底部大空間框支密肋復合墻結構的1 2和1 3比例模型進行偽靜力試驗研究，通過對底部大空間框支密肋復合墻結構在豎向荷載及與水平低周反復荷載共同作用下的受力性能的試驗研究，探討了結構的變形性能、滯回耗能和破壞形態，並與框支砌體結構進行對比分析。 -
Both latticed frame and reticulated shell are space grid structures, but their mechanical property has many difference, the integral stressing performance have analogy with slab in a sense, it mainly bear bending force ; then reticulated shell is mainly stress membrane fore, the integral mechanical property is similar to continuous shell
網架和網殼雖同屬于空間網格結構，但其力學性質有較大區別，網架在某種意義上其整體受力性能類似於平板，以受彎曲力為主；網殼則接近於連續殼體，結構受力以薄膜力為主。
分享友人