ultimate load analysis 中文意思是什麼
ultimate load analysis
解釋
極限荷載設計-
Based on the analysis of mechanism for joint region, the " frame - wall " and " aslope compression stub column " mechanical models and yielding patterns of core zone of the joints are set up. the shear load - carrying formulation for joint core zone is also given in terms of plastic ultimate analysis. and then, the comparisons between the formulas given in this paper and that of chinese design code ( draft ) and nonlinear fem as well are presented
對節點核心區的抗剪，通過受力機理的分析，建立了鋼「框架剪力墻」加混凝土「斜壓短受力體系及其屈服機制，根據塑性極限分析，給出了節點核心區抗剪承載力計算的迭加公式， 《規程》公式和非線性有限元近似模擬分析結果進行了比較。 -
This paper have studied some questions which included distributed load, lapped length, becoming less crowded purlins each other in the lap joints, mechanic analysis, lateral buckling and ultimate load - carrying capacity and construction of double purlin in the lap joins. according to result of test and analysis of theories, the author advances the suggestions, which may be a reference to steel structure design
文章對z型連續搭接檁條荷載分佈、搭接長度、搭接嵌套松動、側向穩定以及構件極限承載力和雙檁條的構造等問題進行了研究，並根據試驗結果和理論分析提出了建議。 -
Analysis of ultimate stage load - carrying capacity of strengthened bending member of bridges
橋梁加固分階段受力抗彎承載力極限狀態分析 -
This paper demonstrates ultimate stress increment of unbonded tendons can be composed of approximate elastic deformation along the elements and local plastic deformation by nonlinear analysis on the unbonded partially prestressed concrete continuous structures. referring to the rule of ultimate stress increment of unbonded tendons at every load case, a regression formula of ultimate stress increment of unbonded tendons based on elastic - perfectly plastic model has been presented for engineers to calculate ultimate stresses of unbonded tendons in prestressed concrete multi - span continuous structures
考慮在各種荷載工況作用下無粘結筋極限應力增量的變化規律，並與理想的彈塑性模型相比較，最終得出以理想彈塑性模型計算各種荷載工況作用下無粘結筋極限應力增量的回歸公式，從而為預應力混凝土多跨連續結構的無粘結筋應力設計計算提供有益的參考。 -
Artificial nerve network forecasted yso in clay p - y curves is researched and 8 physical parameters are studied by using the principal component analysis method when the fracture load was not reached for a trial pile under lateral load, the ultimate load of the pile might be predicted to the field - surveyed load settlement data of existing trial pile and by h - s curve extension method and hyperbola method
在對粘性土p - y曲線計算參數y _ （ 50 ）的研究中，對粘性土常規8個物理性質指標進行主成分分析，研究用人工神經網路分析預測粘土p - y曲線中的y _ （ 50 ） 。建立了神經網路計算模型，可用來計算預測粘性土p - y曲線中的y _ （ 50 ） 。 -
Parametric analysis of the ultimate load - carrying capacity of the concrete filled steel single tubular arch under in - plane loads
肋拱面內極限承載力的參數分析 -
The nonlinear analysis of reinforced concrete slabs includes the ultimate load analysis and the finite element analysis
鋼筋混凝土板的非線性分析方法主要有極限分折和有限元分析。 -
( 3 ) by using an elastic - plastic material model, the nonlinear analysis is taken on the rectangular tube and simply supporte d plate, and the ultimate carrying load capacity pu is obtained. the results show that the buckling mode is in accordance with the assumption of elastic analysis, and so shows the ultimate mode
（ 3 ）採用彈塑性模型，考慮幾何非線性理論，利用ansys軟體對矩形鋼管考慮板組相關屈曲影響和不考慮相關屈曲影響（將矩形管板件按四邊簡支板對待）兩種情況進行了屈曲後分析，分別得出其極限承載力p _ u ，並分析了矩形管的屈曲過程。 -
Secondly, the mechanical respond of a typical asphalt pavement structure under heavy load was analyzed according to multilayer system elastic theory and characteristics of heavy loads, and analysis method of ultimate bearing capacity of asphalt pavements was advanced
其次，利用彈性層狀體系理論，根據重載的荷載特性，分析了典型瀝青路面結構在重載下的力學響應，研究了瀝青路面極限承載力的分析方法。 -
Until now, the domestic and overseas scholar has studied the factors that have effect on performance of steel fiber reinforced concrete corbel such as shear span to depth, strength of concrete, reinforcement ratio ( including longitudinal reinforcement and stirrup ) and ratio of horizontal to vertical load. for calculating the cracking load, and ultimate load domestic and foreign scholar has brought forward a series of calculative formulas and methods have been put forward that based on statistical analysis, flexural model and truss model
到目前為止，國內外學者已研究了剪跨比、混凝土強度、配筋率（包括縱向鋼筋和箍筋） 、水平荷載與垂直荷載之比等因素對鋼筋鋼纖維混凝土牛腿受力性能的影響，對牛腿的抗裂計算和承載力的計算，國內外學者曾提出了基於數理統計分析、彎壓模型和桁架模型等的一系列計算方法和計算公式。 -
The ultimate load - bearing capacity analysis of steel frames considering local buckling of plates
考慮板件局部失穩影響的鋼框架極限承載力分析 -
A material nonlinear finite element analysis for the cast - in - place reinforced concrete hollow slab that occurs from initial loading, cracking, yielding to failing is carried on. the cracking load, ultimate load, the displacement rules and the principal stress distribution rules of the hollow slab under the vertical loads are obtained. a material nonlinear finite element analysis for the single span hollow flat - plate floor is also carried on
其次對空心板進行了從加荷、開裂、屈服直至破壞的全過程材料非線性有限元計算，得到了空心板在豎向荷載作用下的開裂荷載、極限荷載及位移和應力分佈規律；還對單跨無梁樓蓋進行了材料非線性有限元計算，通過分析主應力場明確了柱上暗扁梁的作用；有限元計算的結果驗證了以上的理論分析並得到了一些重要的結論，對改進現澆空心板無梁樓蓋的構造措施有重要的參考價值。 -
In this thesis, the experimental research of the behavior of high strength concrete axial compression columns and eccentric compression columns under non - uniform temperature field are conducted. from the experimental analysis, the variational regularity of ultimate load capacity and deformation of high strength concrete compression - flexure members under non - uniform temperature field is obtained. the influences of different factors including temperature, stirrup contents, strength grade of concrete, pre - loading level, eccentricity and different loading - temperature paths to refractory capability of members are investigated
文中還對高強混凝土軸心受壓柱和偏心受壓柱在不均勻溫度場下的力學性能進行了試驗研究，通過試驗分析了高強混凝土壓彎構件極限承載力和變形在不均勻溫度場下的變化規律，考察了不同升溫溫度、箍筋用量、混凝土強度等級、預加荷載水平、荷載偏心以及荷載?溫度途徑等對構件耐火性能的影響，通過試驗量測，得到了構件的截面溫度場。 -
Ultimate load analysis of plate girders by spline finite strip and plastic hinge method
樣條有限條塑性鉸法分析板梁的極限荷載 -
5. it was found that the load location changed with the thickness of slabs increasing through the analysis of the relationship between ultimate load and slab thickness
5 、通過分析極限荷載隨板厚的變化，發現板的極限荷載所對應的荷載位置會隨板厚的增大發生變化。 -
Ultimate load capacity analysis for concrete - filled - steel - tube beam - columns
鋼管混凝土受壓構件的彈塑性承載力分析 -
The assumption about deformation character and constitutional relationship of high strength concrete and reinforcement under elevated temperature is proposed making use of the general regularity of high strength concrete compression - flexure member. the ultimate load capacity and deformation of high strength concrete compression - flexure members under elevated temperature are analyzed by means of full - range and non - linear analysis method. the computing results and test data are in good agreement
根據高溫時高強混凝土壓彎構件的一般規律，給出了高溫時高強混凝土和鋼筋變形特徵的假設和本構關系，利用全過程非線性分析方法分析了高溫時高強混凝土壓彎構件的極限承載力和變形，計算結果與試驗結果吻合較好。 -
This thesis points out a theoretical and experimental analysis of the ultimate load - carrying capacity and deformation of the un - braced ideal steel frames. it evaluates the practicality of the book code for design of steel structure ( gb 50017 - 2003 ) in analysis the internal force of steel frames, and gives some suggestion on the structure analysis and design of steel frame
本文對理想鋼框架的極限承載力和變形進行了理論與試驗兩方面的系統分析，評估了新的《鋼結構設計規范》 （ gb50017 - 2003 ）關于鋼框架結構內力分析條文的適用條件，為鋼框架的結構分析和設計提出了一些建議。 -
The ultimate load analysis, mainly the yield - line theory and strip method, cannot illustrate the development of inner forces, deflection or the spreading of the cracks. meanwhile, the implementation of fem can give the information
由於極限分析不能給出結構的受力和變形發展全過程，因此不利於揭示結構的薄弱部位和環節，也不利於結構的優化設計。 -
Through leading the files into the stability analysis of ansys, ultimate load in the effect of residual stress can be gained. the method can be applicable to simulate difficult distribution of the residual stress
該方法通過指定單元沿厚度方向5個積分點處的應力值，來反映冷彎殘余應力沿厚度方向變化的特點，並適用於模擬各種殘余應力分佈。
分享友人