介面模件 的英文怎麼說

中文拼音 [jièmiànmójiàn]
介面模件 英文
interface module
  • 面 : Ⅰ名詞1 （頭的前部; 臉） face 2 （物體的表面） surface; top 3 （外露的一層或正面） outside; the ri...
  • 模 : 模名詞1. （模子） mould; pattern; matrix 2. （姓氏） a surname
  • 件 : Ⅰ量詞（用於個體事物） piece; article; item Ⅱ名詞1. （指可以一一計算的事物） 2. （文件） letter; correspondence; paper; document
  • 介面 : joggle; nozzle; mouthpiece; [計算機] interface
  1. And the interfaces have analog input, analog output and digital input / output. we have used differently cards, such as pc - 6330d a / d card, pcl - 728 d / a card based isa bus, ipc - 5375 i / o card and so on. in addition, we select micro - stir switches and pressure sensors as sensor elements to inspect the system and choose relays and induction valves to control the bicycle pump and the motor

    總線採用isa內部總線；介面主要有模擬量輸入介面、模擬量輸出介面、開關量輸入輸出介面等，課題分別選用pc - 6330d型a d板卡、基於isa總線的型號為pcl - 728的d a板卡、型號為ipc - 5375的i o板卡；另外，課題選用了微動式行程開關、壓力變送器作為傳感元件檢測系統，選用繼電器、電磁控制換向閥實現對氣缸、電機的控制；採用vc + + 6 . 0編制控制軟體，實現了纖維鋪放技術的計算機控制。
  2. Modulation technology are well - suited to the implementation of analog interfaces in digital communication and signal processing systems

    Adc非常適合用來實現數字通信系統和信號處理系統中的模擬介面部件。
  3. When this paper introduces the hot swap design and implementation of each level of the gf8516 core router, it puts emphasis on the design and implementation of the hot swap interface board drivers and the hot swap support platform including the common management module of network processors, the hot swap system driver, and so on

    在介紹gf8516核心路由器的各層熱切換的設計與實現時，本文著重介紹了包括網路處理器公共管理平臺及熱切換系統驅動程序等組成部分的熱切換支撐平臺以及熱切換介面模塊驅動組件的設計與實現。
  4. Then, i illuminate the importance of after - service in traditional erp system. i also do some research on how to integrate after - service into erp system : making communication between after - service subsystem and buying subsystem with buying interface module ; making communication between after - service subsystem and production subsystem with account interface module ; making communication between after - service subsystem and production subsystem with import / export interface module

    對將售服系統納入erp系統進行了深入的研究：通過建立采購介面模塊將售服系統與原有采購系統結合；通過建立財務介面模塊使售服系統與原有財務系統結合；通過建立零件移入移出模塊使售服系統與原有生產系統結合。
  5. The file containing information of the scene is defined as the interface between the modeling application and rendering application. the interface gives two types of saving template, providing a discriminating standard for the rendering of plane models and nurbs models that coexist in the rendering application

    該系統以存儲模型信息的文件作為模型建立程序和場景著色程序之間的介面，在介面文件中，定義了兩種類型的存儲模板，即用多邊形集描述平面模型，用nurbs描述曲面模型。
  6. The whole system can be used widely not only as an independent specific system module, but also in the embedded system with cpu control. finally, the interface between microprocessor and rsa, or between rsa and eeprom is implemented to realize the whole system function. the design of iic part is depicted with verilog hdl

    Rsa演算法實現的軟核設計在應用上具有很大的靈活性和獨立性，在介面模塊的配合下可以作為系統中獨立的加密解密運算部件，在微處理器的控制下使用，可以作為獨立的專用系統來使用。
  7. On the basis of analyzing system integration design, heterogeneous system features and function requirements, several system integration schemes are discussed, a multi - heterogeneous system integration model is proposed, and the model presented in this paper is used and analyzed in a practical project

    摘要在分析系統集成的設計原則和異構集成系統特徵以及功能需求的基礎上，總結了幾種常用的系統集成方案，提出了一個基於重用介面組件的多異構系統集成模型，並結合實際應用進行了分析。
  8. Chapter 5 analysizes the serial communication interface module ( mscan ) in dsp56f807, introduces the design of the building block of mscan, and ended with the test and usage of mscan

    第五章分析了dsp56f807的串列通信介面模塊（ mscan ） ，並進行了基於c / os - ii的mscan通信及構件設計，完成了mscan構件的測試與使用。
  9. The first is the interface of software and hardware which is based on opc technology, its function is building the communication between the devices and the function components ; the second is the control module which corresponds with all of the function components according to the task and process ; the third is fms configurable components module, it can provides not only the friendly operation environment but also the configurable operation interface in line with the layout of devices on the workshop. on this basis, a prototype system is developed, by which the control system of the flexible manufacturing system is constructed for the teaching fms system in the cims center of college

    基於opc技術的軟、硬體介面模塊，它實現了fms的各功能組件對底層設備的數據實時採集和控制指令的下達; fms調度控制模塊，它根據加工任務和加工路徑要求，協調並控制著fms系統各個功能組件之間的邏輯動作操作順序; fms系統組態配置模塊，它不僅提供了友好的人機操作界面環境，而且還可依據現場設備布局的具體情況進行界面的組態布局配置。
  10. In order to improve reliability and simplify the hardware design, many new i2c bus elements were used to realize binary input, logic output, clock functions and storing settings and reports. by simulating i2c bus data transfer, the mcu realized writing and reading data from each element the whole hardware system ' s structure is compact and reasonable, and the device has high reliability, stability and immunity to disturbance

    從提高可靠性和簡化電路的角度出發，設計硬體電路板時使用了許多新型i ~ 2c串列介面器件， mcu用普通i / o口模擬i ~ 2c總線介面，由軟體模擬i ~ 2c總線數據傳輸過程，實現了開入開出、定值存儲、報告存儲和時鐘對時等功能。
  11. Acquiring testing factors in component software integration based on dfa model functions of the interface, event, context dependence relationship and content dependence relationship in componentbased software were analyzed with regard to integration testing. the difficulty in acquiring these four factors was also analyzed

    分析了構件化軟體介面事件上下文及內容依賴關系在集成測試中的作用，以及提取該四要素的難度針對構件化軟體的自身特點提出了一種有限狀態自動機模型，利用該模型實施對四要素的提取，並通過實例驗證了該模型的有效性。
  12. Functions of the interface, event, context dependence relationship and content dependence relationship in component - based software were analyzed with regard to integration testing. the difficulty in acquiring these four factors was also analyzed. a dfa ( deterministic finite automaton ) model based on the characteristics of component - based software was proposed so that these four factors could be acquired from the model. an example was given to prove the validity of the model

    分析了構件化軟體介面、事件、上下文及內容依賴關系在集成測試中的作用，以及提取該四要素的難度;針對構件化軟體的自身特點提出了一種有限狀態自動機模型，利用該模型實施對四要素的提取，並通過實例驗證了該模型的有效性。
  13. She used the unique plug - in interface technology and open model to support arbitrary weather data server plug - ins, making more than she can support the very source of weather information

    她採用獨有的插件技術和開放介面模式，能支持任意天氣服務器數據插件，使得她能支持非常多個天氣信息來源。
  14. In this paper, the author gives a detailed introduction of an interface circuit board and a support software both based on hart communication protocol and serial interface communication protocol. the hardware and software together play a key role in the communication between operator station and field instruments

    介面卡件能夠在嵌入原來的國產分散控制系統supmax500並且不影響其對遠程儀表的模擬量進行控制的基礎上，支持符合hart協議的智能儀表與dcs中的分散處理單元和上位機進行通信。
  15. Meanwhile, the bluecat linux of lynuxworks " is app lied in our system in detail. we describe the advanced power management ( apm ) and flash filesystem ( ffs ), in order to complete process management and acess the flash rom area in ep7312. further we introduce the implementation of embedded gui and board support package ( bsp ). the system we developed is efficiency, as well as easy to transplant to other communication systems, so it has a bright future with widely used it has been verified that the methods and plans mentioned in this paper are of great correctness in the practical applications

    其中詳細分析了bluecatlinux特有的先進功率管理（ apm ）軟體實現對系統高效的多任務管理、快速靈活的任務間通信及閃存文件系統（ ffs ）的建立管理機制及編程實現，並說明了板級支持包（ bsp ）和設備驅動程序的編寫。由於對復雜通信系統的設備所涉及的介面模塊大部分電路是一樣的，該主控模塊略經修改可以作為一個通用嵌入式系統的模塊，應用於其它系統或產品具有較廣的應用前景。
  16. According to the needs to debug and test the device in laboratory, i bring up a scheme for adding a usb communication interface module in the laser warning device. then i describe how to design and implement this module. the module uses the ez - usb fx series chipset made by cypress as the central component

    本論文在介紹了激光威脅告警器的通信方式的基礎上，針對其在實驗室進行調試與測試的具體需要，提出了在激光威脅告警器上加裝usb通信介面模塊的實現方案；詳細介紹了採用美國cypress公司的ez - usbfx系列晶元作為核心器件的usb通信介面模塊的設計與實現，包括模塊硬體設計、模塊的固件和主機端應用軟體開發的技術細節，並且對usb通信介面模塊的調試與測試做了相當的描述。
  17. The linux kernel possesses the rich software resources, mature functions, steady working behavior. this paper clarifies the modules that make up the kernel, especially analyses the memory management module and the process management module, introduces the virtue file system module, the inter process communication module and the network module. so we have the deep theory foundation to reconstruct the kernel

    Linux的內核是一個軟體資源十分豐富，功能完善，工作穩定的系統內核，本文對其組成模塊進行了深入的分析，著重剖析了內核的內存管理模塊和進程管理模塊，介紹了虛擬文件系統模塊、進程通信模塊、網路介面模塊的工作原理，為對linux內核進行改造奠定了堅實的理論基礎。
  18. Aiming at the application demand of electric system, the thesis analyses the data management technology of grid middleware globus, proposes the main frame of grid - based data management system ( gdms ), emphasizes the design method and application technology of data interface module

    針對電力系統的應用需求，論文分析了globus網格中間件的數據管理技術，提出了基於網格的數據管理系統（ grid - baseddatamanagementsystem ， gdms ）的總體框架，重點研究了數據介面模塊的設計方法與實現技術。
  19. The whole system is divided into access and control of outlook express module, user interface module, security service embedding module, key and trust management module, provision of security service module and configuration module in this dissertation

    將整個安全電子郵件客戶端系統劃分為outlookexpress訪問控制模塊、用戶介面模塊、安全服務嵌入模塊、密鑰和信任管理模塊、以及安全服務提供模塊和系統配置模塊。
  20. Above all, the simulating operation is automatic because the interface between adams and matlab is shielded and simplified. secondly, this system can simulate factual motor that is the simplified and ideal one in adams. in the new system, the motor is automatically created and the operation is just to select a method of control

    該軟體系統具有下面幾個特點：首先，本軟體系統實現了流程的自動化，對用戶屏蔽了數據介面，專用數據介面文件在matlab和adams之間可以自動傳輸；其次，本軟體系統實現了控制電機的自動生成，並突破了adams只能模擬理想電機的局限，用戶只需選擇控制方式即可。
分享友人
分享到 Line

分享到臉書