嚙合狀態 的英文怎麼說

中文拼音 [niègězhuàngtài]
嚙合狀態 英文
engagement
  • 嚙 : 動詞[書面語]1. （鼠、兔等用牙啃或咬） gnaw （at） 2. （侵蝕） erode
  • 合 : 合量詞（容量單位） ge, a unit of dry measure for grain （=1 decilitre）
  • 狀 : Ⅰ名詞1 （形狀） form; shape 2 （情況） state; condition; situation; circumstances 3 （陳述事件或...
  • 態 : 名詞1. （形狀; 狀態） form; condition; appearance 2. [物理學] （物質結構的狀態或階段） state 3. [語言學] （一種語法范疇） voice
  • 狀態 : status; state; condition; state of affairs: （病的）危險狀態 critical condition; 戰爭狀態 state o...
  1. Equations of mesh, shorting contact line, undercutting limit line, meshing limit lines and the existence conditions, angle between the direction of relative speed and the direction of contact line, induced normal curvature about every point on the contact line are established. moreover, the paper also theoretically analyzed the error of the grinded gear surface. on the basis of the theory, the computer program is worked out to automatically produce the contact line and the boundary curves of mesh. analysis of meshing circs under different parameters can be done so that we can gain the best process condition

    首先對漸開面二次包絡理論進行了深入的探討，推導出了兩次嚙合的嚙合方程式、瞬時接觸線方程式、根切界限線方程式、嚙合界限線的方程式及其存在條件，相對運動速度方向與接觸線方向的夾角及接觸線上各點的誘導法曲率；此外，還對磨齒后工件的齒面誤差進行了理論分析；並在理論基礎上編制了相應的計算機程序，自動生成接觸線族及嚙合界限線，對不同參數條件下的嚙合情況進行分析，可以使工藝條件達到最佳狀態；最後研究了磨齒裝置，設計了磨齒機的傳動系統。
  2. In the solid model building program, based on the cutting tooth theory of double circular arc profile spiral bevel gear and autocad software, a series of computer simulations about solid model building and cutting tooth process of the gear were curried out. the cutter ' s tooth shape, the processed gear blank shape and its conjugated tooth profile shape as well as visual movement relationship between generating gear and processed gear blank etc. were obtained. the relative position of cutter and processed gear as well as the movement trace and rule in the cutting process can be showed dynamically on screen

    在實體建模程序中，以雙圓弧弧齒錐齒輪的加工原理為基礎，藉助繪圖軟體autocad ，模擬了雙圓弧弧齒錐齒輪銑刀盤刀齒形狀、輪齒毛坯形狀等，進而根據產形輪與被加工齒坯之間的共軛嚙合關系，進行了雙圓弧弧齒錐齒輪的實體建模及加工過程模擬，在屏幕上動態顯示刀具及被加工齒輪的相對位置及其加工時的運動軌跡和規律。
  3. On the basis of utilizing geometric conversion and modification principle of spur and helical gears, the mathematical model for geometric parameters and modification of overlapping coefficients of gear was established, and the calculation method of sliding frictional coefficients under elasto - hydrodynamic lubrication state was introduced, thus let the calculation method of meshing efficiency of gears be more coinciding with the practical application

    在運用直、斜齒輪幾何換算和變位原理的基礎上，建立齒輪的幾何參數和重迭系數修正的數學模型，介紹了彈流潤清狀態滑動摩擦因數的計算方法，從而使齒輪嚙合效率計算方法與實際應用更吻合。
  4. Based on the analysis and discussion of characteristics and law of gear engagement under condition of elasto - hydrodynamic, a calculation method on sliding and rolling work loss of standard spur gear transmission had been put forward, and the relationship of geometric parameters and overlapping coefficients of gear with sliding work loss was revealed

    摘要基於彈流潤滑狀態下的齒輪嚙合特性及規律分析和討論，提出了標準直齒傳動的滑動功損及滾動功損的計算方法，揭示了齒輪的幾何參數和重迭系數與滑動功損的關系。
  5. The states of motions and victories and forces of the worm engaging point were been analysis. the motions and forces of the worm engaging point have been initiate by the program with matlab. the 3d motions of plane double enveloping worm has been emulated with solidege and flash

    應用solidege三維實體造型軟體，進行平面二次包絡環面蝸桿傳動的運動狀態的動態模擬，模擬了平面二次包絡環面蝸桿傳動的運動狀態，再現了蝸桿嚙合的運動狀態的模擬。
  6. The elastic mesh theory must be used to analyse mesh condition in gear transmission in order to gain high - powered gear

    要獲得高性能齒輪傳動，需要用彈性嚙合理論分析齒輪傳動過程中輪齒的嚙合狀態。
  7. 3 、 based on the model, a quasi - static meshing simulation is carried out in a meshing period. the numerical results which indicating the variety of the contact status, the contact stress, the bending stress in the location of teeth root and the torque and rotary speed of gear pair vs. the different meshing position are presented, and the rationality of the model is be verified

    3 、基於所建有限元分析模型，在一個嚙合周期內，對齒輪副進行準靜態嚙合模擬分析，給出了準靜態嚙合時齒輪的接觸狀態、接觸應力、齒根彎曲應力及主從動齒輪的扭矩和轉速隨嚙合位置變化的規律，驗證了所建模型的正確性。
  8. 4 、 on the basis of analyse of a quasi - static meshing simulation in a meshing period, a dynamic meshing simulation in the case of definite torque and rotary speed are carried out in a meshing period. the numerical results which indicating the variety of the contact status, the contact stress, the bending stress in the location of teeth root and the torque and rotary speed of gear pair vs the different meshing position are presented

    4 、在對螺旋錐齒輪準靜態嚙合進行模擬分析的基礎上，進行了螺旋錐齒輪動態瞬態嚙合模擬分析，重點分析帶載啟動時出現的沖擊現象，得出了齒輪的接觸狀態、接觸應力、齒根彎曲應力及主從動齒輪的扭矩、轉速和加速度隨嚙合位置變化的規律。
分享友人
分享到 Line

分享到臉書