均勻顆粒度 的英文怎麼說

中文拼音 [jūnyúnkēlìdù]
均勻顆粒度 英文
uniform particle size
  • 均 : Ⅰ形容詞（均勻） equal; even Ⅱ副詞（都; 全） without exception; all
  • 勻 : Ⅰ形容詞（均勻） even Ⅱ動詞1. （使均勻） even up; divide evenly 2. （分出一部分） spare
  • 粒 : Ⅰ名 （小圓珠形或小碎塊形物） small particles; grain; granule; pellet Ⅱ量詞（用於粒狀物）
  • 度 : 度動詞[書面語] （推測; 估計） surmise; estimate
  • 顆粒 : 1 （小而圓的東西） pellet; bead; dust; anything small and roundish （as a bean pearl etc ）2 （一...
  1. Powder materials can be made into even granules customer needs without adding any bonding anent when they run througnh the machine. as density of granules are larger, no any afterward process is needed so as to reduce technological process, reduce granulation cost and powder pollution and improve labor environment as well

    粉體物料經本設備，無需添加任何粘結劑即可直接製成用戶所需的均勻顆粒產品，顆粒密度大，城無需再進行后續加工處理，減少了工藝流程，不僅降低了造粒成本，並且減少了粉塵污染，改善工人的勞動環境。
  2. The influence of inflow velocity, the baffle body height and the clapboard position on the flow velocity, flow equilibrium between the two sides of the clapboard, particle distribution, rich / lean concentration ratio and flow resistance characteristic are studied numerically

    文章研究了來流速度，撞擊塊高度、隔板位置等因素對氣相速度場、隔板兩側配風均勻性、顆粒濃度、濃淡分離比和燃燒器內阻力特性的影響。
  3. Firstly, the surface characteristic of polystyrene particle is changed from water detesting to water intimity by using special techniques and admixtures so mat the compound quality with inorganic materials is insured. secondly, the contradiction between the weight and strength is solved through optimizing the particle size and using composite fiber and the best heat conductivity is achieved under the condition that the necessary strength is met. in the research process, the author solved the problem of fiber dispersing in insulating materials so that the contraction of the material is controlled

    課題研究中，首先採用特殊的改性工藝及外加劑實現對聚苯乙烯顆粒表面的成功改性，使其表面由憎水轉化為完全親水，確保與無機材料的復合質量；其次，通過採用優化骨料級配及使用復合纖維等措施解決了保溫材料的輕質與強度的矛盾，使保溫材料在滿足必要的強度的前提下，導熱系數降至最小；並且，課題研究中成功解決了纖維在保溫材料中均勻分散的問題，達到了抑制保溫材料收縮的目的；最後，通過採用復合外加劑、合適的膠凝材料及合理的配比等措施確保該保溫材料具有良好的和易性，滿足施工的要求。
  4. Guangxi man ting fang fine chemical co., ltd. applies rich local high quality mine and advanced airflow and classification technologies to produce stone powder delivering outstanding qualities of high purity, high whiteness, and equal concentrated grains distribution

    廣西滿庭芳精細化工有限公司利用當地蘊藏量豐富的高品質礦產資源，採用先進的分流分級技術所生產的石粉具有純度、白度、高顆粒均勻分佈集中的顯著特點。
  5. Smooth tempered glass is manufactured by heating up float glass to swiftly and uniformly, with this special heat treatment and quenching process which increases glass strength up to four to five times vs, annealed glass, in case stresses beyond its capacity, smooth tempered glass simply disintegrates into innumerable small pieces, significantly reducing the risk of serious injury

    鋼化玻璃是將浮法玻璃經過物理性淬火處理，使其表面形成均勻的壓應力，而內部則形成張應力，從而有效的提高了玻璃的抗彎和抗沖擊性能，強度達到了普通玻璃的3 - 4倍，當其破碎時則分裂成均勻純角不易傷人的小顆粒，使其成為一種現代生活中理想的安全玻璃。
  6. When sno2 wt % was controlled for 10 %, the square resistance of sn - in2o3 was minimum. through the characterization of in2o3 / sno2 nano powders, some conclusions were drawn : sno2 nano powder is rutile structure, and in2o3 and sn - in2o3 nano powders are cubic structure. in2o3 / sno2 nano powders were well dispersing with spherical uniform grain, and the mean grain was 4 - 50 nm

    通過對inzo3 / snoz納米粉體表徵，得出inzo3 / snoz納米粒子多呈球形、顆粒均勻、分散性良好、組分均勻、純度較高、平均粒徑在4一50lun左右、比表面積達67一156mz / g ; snoz納米粉為正四面體金紅石結構， inzo3和sn一inzo3納米粉為體心立方結構。
  7. The wavelet multi - analysis is adopted to further understand the microstructure of solids holdup fluctuation, the vivid fingermark images show that it is a fractal and dissipative structure. the low and frequency signals reflect the dilute phase fluctuation behavior and dense phase ( cluster ) fluctuation behavior, respectively. to deep understand the multi - scales characteristic of gas - solids circulating fluidization, the wp decompose methods for obtaining the eigenvalue of gas - solid fluidized bed has been developed. the results show that eigenvalues of different scales are effective for identification of non - uniform and dynamic structure of gas - solid fluidized bed

    小波多分辨分析法得到指紋圖形象地揭示了顆粒濃度脈動的自相似、分叉等具有混沌特徵的微觀結構；小波分解后信號中的低頻和高頻成分分別代表了稀相和密相的脈動行為，小波包分解提取能量特徵值的方法能夠揭示氣固的多尺度特性，不同尺度上的能量特徵值四川大學碩十論文反映了氣固循環流化系統中存在的非均勻動態時空結構。
  8. This machine is applicable for mixing of powdery and granulate materials in pharmaceutical, chemical, foodstuff, light industry, electronic, mining and metallurgy, national defense industry and scientific research institutes

    該機適用於制藥、化工、食品、輕工、電子、建材、國防工業及各科研單位的粉末、顆粒物料的高均勻度混合。
  9. The porous ceramics is composed of lots of bridge arch - shaped microspores that connected and well - distributed inside the material. when the fluid passes through these pores, the suspended matters, colloid particles and big molecular organic substances are withheld or absorbed to the inner surface of the pore, and result in filtration, purification adn even - dispersion, high strength, good resistance to abrasion, high temperature and corrosion, no pollution, long workinglife, and easy to regenerate, the porous ceramics are available for filtration and fluidization of variou gas and liquid

    微孔陶瓷過濾介質由許多大小分佈均勻，相互連通的橋拱狀開口氣孔組成.當流體從這些氣孔中通過時，流體中的懸浮物質，膠體顆粒，大分子有機物等被截留，吸附在微孔道內，從而達到了凈化和過濾均勻化的效果.微孔陶瓷強度高，耐磨損，耐高溫，耐腐蝕，無污染，氣孔分佈均勻，使用壽命長且再生簡便，特別適用於各種氣，液過濾和流態化過程
  10. Effect of injecting inert particles on coking prohibition and particle velocity uniformization in downer reactors

    下行床反應器中惰性顆粒射入對結焦抑止和顆粒速度均勻化的影響
  11. The degree of mixing and the rate of approach to uniformity will depend on the frequency of turnover of solids.

    混合的程度和達到均勻混合的速度，將由固體顆粒在單位時間內翻轉的次數來決定。
  12. Moreover, the tio2 film particles distribute more uniform and join tightly with the increasing of power, but the surfaces of films become closer and smoother when pressure increased or the ratio of oxygen decreased

    提高功率可提高膜的覆蓋度，使濺射膜顆粒分佈均勻，結合更加緊密。提高壓力或減小氧氬比，可使濺射膜的顆粒更加密集。
  13. The microwave magnetic sintering can not only lower the sintering temperature and shorten the sintering time, but also decrease the micro - grain size of magnets and make intergranular phase and grain boundary of main phase distributed well. the abnormal grain growth was found in conventional sintered ndfeb magnets, which may be due to the greater particle size and uneven distribution of powder, and higher sintering temperature and longer sintering time. of course, the abnormal grain growth would deteriorate the magnetic properties

    微波磁場燒結的不但降低燒結溫度，縮短燒結時間，而且使磁體整體加熱，受熱更均勻，因而磁體晶粒更細小，並且主相晶粒邊界趨于規則化，晶間相的分佈更均勻；在常規燒結的磁體中則出現了晶粒異常長大現象，造成這一現象的原因，一方面可能是燒結溫度過高或燒結時間過長，另一方面可能是磨製的粉體均勻性較差，存在的大顆粒被許多細小顆粒包圍，在燒結過程中，大顆粒不斷吞併小顆粒，逐漸長大，而異常長大的晶粒自然會導致磁體性能的惡化。
  14. Diamond ( diamond glass ) with a large polishing powder particles to the use and performance : ultrafine polishing powder particle size, particle size uniform, cut power and polishing speed, high - yield diamond, easily washable, is essential to the processing of diamond polishing materials

    信息描述：水鉆用大顆粒拋光粉的用途及性能：拋光粉粒度超細，粒度均勻，削力強，拋光速度快，水鉆成品率高，易清洗，是水鉆加工必不可少的拋光材料。
  15. Marvellous effect of eliminating stress and improving strength ： with its strong interior structure, invulnerability to breakage and evenly distuibuted sizes, has marvelous effect of eliminating stress and improving the surface structure of the workpieces

    具有消除應力，提高強度的效果鋼絲切丸內部結構組織嚴密，不易破碎，顆粒分佈均勻，可起到消除應力，提高工件表面硬度之效果。
  16. Rotary cutters need no screen, but produce consistent grain size, low powder contain

    滾齒刀具無需篩板，粉碎顆粒度均勻，粉塵含量極少。
  17. The analysis of microstructure of samples showed that the grain of tio2 were very small under 700, the distance of grain became small with temperature increasing, the rate and size of pore was decreasing. the relative density of sample at 900 was 97 % and the grain size of sintered body was about 200nm. when the temperature exceeded 1100, the grain size of body grew up several times ( > 2 m )

    Tio _ 2燒結體sem顯微形貌分析表明：低溫（ 700 ）時坯體內顆粒無明顯長大，燒結體緻密度不高（ 80 ）晶粒間距隨溫度升高而變小，氣孔率也隨之降低，氣孔尺寸變小；當溫度超過900時，晶粒間連接緊密，燒結體內出現大量絮狀物質，緻密度大幅度提高，達97以上，小氣孔已聚集成大孔洞且分佈均勻，晶粒長大不明顯（ 200nm左右） ；當溫度超過1100時，燒結體緻密度有所提高，但晶粒尺寸出現異常長大，長大了十幾倍（達2 m以上） 。
  18. The sem and the pl observation showed that the surface of porous silicon prepared by pulsed etching was more uniform and the si particles were smaller. the intensity of pl formed by pulsed etching method was enhanced and the peak had blue shift comparing that formed by dc electrochemical etching method. at the same time, it was observed that the smaller the dimension of the porous silicon, the broader energy gap of the porous silicon

    採用脈沖和直流電化學腐蝕兩種方法制備多孔硅，對這兩種方法制備的多孔硅樣品進行掃描電鏡和熒光光譜的測量，發現脈沖腐蝕制備的多孔硅樣品比直流腐蝕制備的多孔硅樣品表面均勻、顆粒尺寸小、發光強度大，而且發光峰位有明顯的藍移現象。
  19. The sand in taklamakan bo has fine grains with similar diameters, and its strength characteristics are not fully are to ordinary sand as well as silty. but its strength shows some features similar to clay when with some water content

    塔克拉瑪干沙漠砂顆粒極細，粒徑均勻，其強度特徵既不完全等同於普通砂，又不同於粉土，在含水狀態下則又表現出與粘性土相類似的特點。
  20. This article mainly emphasize on the classification of coarse grained soil from the viewpoint of engineering application ( content of coarse grains ), vibrating method is introduced in the shaping. meanwhile, research is made to the water stability and shear strength. through research, following conclusions are obtained : coarse grained gradation is the main factors to determine its shear strength, when the coarse grains content is over 70 % or around, the maximum shear strength appears : the grains itself have a bigger effect on the shear strength

    以往對粗粒土的研究方法多採用擊實法，很少有人研究其抗剪強度特性，本文主要從工程應用的角度（粗粒含量）對粗粒土進行工程分類，成型方法採用振動法，同時對水穩定性、抗剪強度特性進行研究，通過研究得出以下結論：顆粒組成級配特性是決定其抗剪強度的主要因素，當粗粒含量在70左右時，抗剪強度最大；顆粒本身的特性對抗剪強度影響較大，顆粒越堅硬、大小顆粒相差越大、越不均勻、顆粒形狀越呈稜角狀、填築密度越大，抗剪強度就越高；含水量對抗剪強度的影響很小，可以忽略不計。
分享友人
分享到 Line

分享到臉書