弧屬性表 的英文怎麼說
中文拼音 [húzhǔxìngbiǎo]
弧屬性表
英文
arc attribute table aat-
Examination of the density, strength, hardness and microstructure showed that the mechanical properties and structure of the part made by direct metal forming process are better than that obtained from selective laser sintering process, as good as or even better than castings
對成形件進行的密度、強度和硬度指標測試和金相組織觀察表明：基於弧焊的直接金屬成形件的組織結構和力學性能指標明顯優于選擇性激光燒結工藝成形件，達到或高於鑄造零件。The main work and conclusion for this paper is as following : according to the flashover test results of several kinds of iced insulators under positive voltage and negative voltage, this paper obtained : for the single porcelain insulator, the single glass insulator and the composite insulator bridged completely by icicle, the metal cathode ' s strong ability of emission electron is the primary reason that results in the lower negative flashover voltage ; the position difference of the high resistance district in method anode side results in that porcelain insulator cluster and glass insulator cluster have an evident effect of polarity ; when less ice and no icicle at the brim of the sheds, due to numerous non - polar arcs on the composite surface, the effects of polarity of composite insulator was lost using the test method of the average flashover voltage in the freezing period, dc flashover performances were investigated of several insulators with some typical structures and different material
本文的主要工作和結論如下：在人工氣候室內，根據不同覆冰絕緣子正、負極性下的閃絡試驗結果，得出負極性電弧金屬陰極的強電子發射能力造成了單片瓷、玻璃絕緣子及被冰凌橋接的合成絕緣子有較低負極性冰閃電壓；正極性電弧金屬陽極側產生高電阻區所處位置的差異使得瓷和玻璃絕緣子串具有明顯的極性效應；覆冰較少時，合成絕緣子表面出現數量較多的非極性電弧使合成絕緣子無極性效應。利用覆冰期內平均閃絡電壓的試驗方法，對不同材質和結構的絕緣子在覆冰、低氣壓和污穢共存環境中的直流閃絡特性進行了研究。試驗結果表明，直流平均閃絡電壓隨著海拔的升高、覆冰量的增加以及污穢度的增加而降低，且其特徵指數與絕緣子結構、覆冰量、覆冰狀態、污穢度等有關。This layout can stop the internal arc fault expansion ; can avoid harmful moisture, small animal and dusty interferences. it also has good perfomiance and high reliability. because the heat cannot transmit to the outside of the bus room, a good operation environment for the low space can be obtained
主母線室置於箱體頂部一個單獨的金屬封閉的間隔內，並與10kv開關室、儀表室等間隔相互獨立，為同類產品首創；這種結構可以防止內部電弧故障的擴大化，避免「火燒聯營」事故；防護性能好，防潮、防小動物侵害、防積塵，運行可靠；由於母線室的隔熱作用，為下層空間創造了一個較好的運行環境。The geochemical examination of the sandstones and mudstones from the xikang group has led us to conclude that the debris are derived mostly from the surficial rocks and their overlying deposits on the xikang - yunnan ancient land, and tectonic settings display the transition from the passive continental margin to active continental margin and finally to archipelago
通過對西康群砂、泥巖地球化學組成特徵研究，認為其物源來自康滇古陸表殼巖及其上覆的蓋層沉積，大地構造屬性為被動大陸邊緣到活動大陸邊緣再到多島弧的轉化。The results indicate that arc melting is a good method to produce nb - si system intermetallics due to its simpler technics, lower cost and compact products. however, powder metallurgy is found to be not suitable to produce the nb - si system intermetallics due to its coarse and loose products resulting from the poor molding property of nb and si mixed powders. optical floating zone technology, which is used to fabricate nb - si intermetallic composites for the first time, is also found to be a good way to produce nb - si system intermetallics because of its compact products and good property despite of its relatively high cost
結果表明，電弧熔煉方法制備得到的nb - si系金屬間化合物比較緻密，且制備工藝簡單，經濟實用，是一種合適的nb - si系金屬間化合物制備方法；由於nb 、 si元素粉末的成型性很差，用粉末冶金方法（熱壓燒結和冷等靜壓）制備的nb - si系金屬間化合物表面粗糙、緻密度低，且成本較高，不宜用於制備nb - si系金屬間化合物；首次用光學懸浮單晶生長技術制備的nb - si系金屬間化合物復合材料緻密度很高，盡管成本稍高，但由於性能最佳，也是一種合適的nb - si系金屬間化合物制備方法。分享友人