振動進給器 的英文怎麼說

中文拼音 [zhèndòngjìngěiqì]
振動進給器 英文
vibrofeeder
  • 振 : 動詞1. （搖動; 揮動） shake; flap; wield 2. （奮起） brace up; rise with force and spirit
  • 進 : 進構詞成分。
  • 給 : 給Ⅰ動詞1 （送對方某物; 使對方得到） give; grant 2 （用在動詞后 表示交與 付出） pass; pay 3 （叫; ...
  • 器 : 名詞1. （器具） implement; utensil; ware 2. （器官） organ 3. （度量; 才能） capacity; talent 4. （姓氏） a surname
  • 振動 : vibrate; vibration; vibrance; vibrancy; vibra; vibes; shaking; rumble; jitter; chatter; sway; jar...
  1. By calculating parameters including the link length, the azimuth angle, the elevation, the optical power that the inter - satellite optical cdma communication system will receive, the variation range of the azimuth angle and the elevation from the optical antenna of atp are understood well. by analyzing the factors to impact bit - error - rate ( ber ) from the received power, multi - user disturbing, background noise, wavelength, bit rate etc, measures to guarantee high performances of the system are obtained, especially those for smoothing the fluctuation of the received optical power from host platform vibration

    分析研究了衛星光cdma通信系統中衛星仰角、方位角和距離，給出了探測器能夠接收到的光功率以及atp子系統捕獲及跟瞄的范圍;對衛星光cdma通信系統性能模型和基於衛星振動系統性能模型的研究，分析了多用戶干擾、接收光功率、背景光噪聲、振動偏差以及碼速率對系統誤碼率的影響，給出了相應的改進措施。
  2. 6. a new method that adopt small exciter emulation to the dual - shaker vibration system and research the numerical electric current phase synchronous controller, thus

    6 .提出採用小型激振器模擬並聯雙振動臺進行數字式電流相位同步控制器試驗研究的方法，從而降低同步控制器在研製階段的試驗成本，並且避免同步控制器的不確定性給振動臺造成損傷。
  3. Abstract : it introduces the principle of graphite electrode abrading tool and develops the software and hardware of nc machine. this can detect the position of platform feed with great inertial - mass through photoelectrical encoder, the vibration magnitude of translation worktable with eddy transducer. based on these the machine parameters can be automatically regulate, and the grinding process is smooth

    文摘:介紹了石墨電極研磨成形機的原理和數控軟、硬體系統的研製開發；用光電編碼器實現了大質量進給滑臺的位置檢測；並用電渦流傳感器檢測平動臺振動量，進而實現了機器參數的自動調整，從而保證了石墨電極研磨成形機研磨加工的順利進行。
  4. Giving paper department adopts a single board to adjust the sending paper specification continually. distances between papers are adjusted by the import segmentless adjustor and vibrant engine is set to make the sending department more stable. the inputting department adopts the single stopping machine function. the whole machine adopts the import transducer to run this machine is suitable for the outer colored packing boxes and wine boxes and medicine boxes and outer packing boxes of different sizes

    給紙部單板操作，調節快速簡便，進口無段調速器調整進紙間距，另配備振動電機使輸送部更穩定，進紙部單獨停機功能，整機採用進口變頻器運轉，該機適用於彩盒外包裝箱及大規格酒盒、藥盒、外包裝箱。
  5. ( 3 ). the flattening arithmetic of an edfa was presented based on the inter - correlative function between the gain spectrum function of the edfa and that of the reserve transmission spectrum of the lpfg. for optimal matching between the two spectra, the flattening arithmetic calculates the variation of the resonant amplitude and wavelength of the lpfg

    Iii .提出了一種動態增益均衡的平坦演算法，這種演算法的本質就是利用摻鉺光纖放大器增益譜函數和新型長周期光纖光柵的透射譜反轉譜函數的相關性，給出新型長周期光纖光柵諧振峰幅度和位置的調節量，使改變后的新型長周期光纖光柵的反轉譜線能和edfa的增益輸出譜線進行最佳匹配。
  6. At this time, the approximate mechanical model of devices has been put forward, which frequency is 70 mhz, then we analyzed the euler ? bernoulli equation, find that the frequency is determined by the resonator ’ s density thickness and length ; the free - free - beam 、 coupled beam 、 support beam 、 transducer have been designed ; the model was simulated and modal analyzed on the coventorware and were consistent with the designed parameter. the silicon surface microfabrication process was developed and emphatically introduced several key surface microfabrication technologies, and was simulated by coventorware

    本文通過分析歐拉-貝努立方程，得出濾波器的共振頻率主要由諧振梁的密度、厚度和長度決定，考慮切變形和轉動慣量的情況下，完成微機械諧振梁、支撐梁、驅動電容的設計;在coventorware軟體上進行模擬，分析結果與理論設計比較好地吻合;對微機械濾波器的加工工藝進行設計，給出器件的完整的工藝流程，重點介紹微機械表面加工工藝，並在coventorware上進行模擬。
  7. The realization of this scheme not only can improve the working and living condition on the platform but also can prolong its operational life span. this is bond to bring huge economic profit to offshore engineering, so it has a promising future. to validate the effectiveness of this vibration control method experimentally, a real control system is made to control the vibration of an oil platform model under simulated wave loadings and the experiment will be conducted in the next term

    根據理論分析結果，本文後面又針對一個近海平臺的實驗模型給出了該模型在模擬波浪載荷作用下的振動控制系統設計方案，並進行了系統設計，用於將來的實驗模型振動控制實驗，以驗證文中所設計變剛度調諧質量阻尼器對由波浪載荷引起的平臺振動的控制效果。
  8. It introduces the principle of graphite electrode abrading tool and develops the software and hardware of nc machine. this can detect the position of platform feed with great inertial - mass through photoelectrical encoder, the vibration magnitude of translation worktable with eddy transducer. based on these the machine parameters can be automatically regulate, and the grinding process is smooth

    介紹了石墨電極研磨成形機的原理和數控軟、硬體系統的研製開發；用光電編碼器實現了大質量進給滑臺的位置檢測；並用電渦流傳感器檢測平動臺振動量，進而實現了機器參數的自動調整，從而保證了石墨電極研磨成形機研磨加工的順利進行。
  9. In this paper, the mechanics model and computer control method for electromagnetism vibration feeder are studied. the emphases are put on the seeking of optical motion states and the realization of these states by computer control. using labview ( laboratory virtual instrument engineering workbench ), a waveform generator is established to control the electromagnetic force

    本文對電磁振動給料機的力學模型與計算機控製做了比較深入的分析和研究，特別是給料機的力學分析與最佳運動狀態、電磁鐵的一些特性和用labview實現計算機控制，在與傳統的控制方法對照的情況下，建立了對比較周全的力學模型，提出了利用labview程序產生一個波形發生器，經過放大后對電磁鐵進行控制。
  10. Presents the simple but highly reliable on - line detection of ultrasonic transducer clamping capacitance based on the impedance circuit model constructed through the impedance characteristics of the ultrasonic transducer under triple harmonics, and concludes from experimental results that this method can be used to effectively detect the variation of clamping capacitance while the transducer is operating, and the matching inductance can be dynamically regulated according to the results of detection, and dynamic matching can therefore be achieved in the real sense at the end of the transducer to improve the overall performance of the whole system

    為了解決大功率超聲應用的換能器電端匹配問題，分析了超聲波換能器在諧振頻率三次諧波下的阻抗特性，給出了超聲換能器三次諧波下的阻抗電路模型.並根據阻抗電路模型建立了對超聲換能器的夾持電容實現在線檢測簡單、可靠性高的方法，實驗證明該方法有效的.該方法可以在換能器工作過程中隨時檢測夾持電容的變化，根據檢測結果對匹配電感進行動態調整，實現真正意義上的換能器電端的動態匹配，從而大大改善匹配質量，提高系統的工作性能
  11. Abstract : a piezoelectric resonance - conveying machine is developed by using homemade piezoelectric ceramic chips, and the structural parameters of its main parts is optimized and researched. a intelligent and multifunctional power supply to drive resonance - conveying machines is also developed. the piezoelectric resonance - conveying machines are to take the place of resonance - conveying machines with their multinomial fine qualities

    文摘:用國產壓電陶晶片研製出壓電式振動給料器，並對其主要部件結構參數進行了優化研究，還研製出驅動壓電式振動給料器的智能化多功能電源，該壓電式振動給料器由於具有多項優良品質可望成為振動給料器的換代產品。
  12. Based on the memorial characters of restoring forces, the equivalent parameters of the bilinear and bouc - wen hysteretic system were gotten by using stochastic equivalent method. then, both the stationary and non - stationary random response of hysteretic system with cubic rigidity and sticky damp were deduced and calculated. in the research of colored white noise, the filter for shaping the power spectral density was designed and the random state response of enlarged vector was gotten

    對平穩白噪聲，給出了平穩響應的求解方法並對平穩狀態下的模型參數對響應的影響進行了比較與分析;在有色白噪聲的研究里，通過有色白噪聲的擴階方法和構造成型濾波器來計算有色白噪聲的響應，從而解決一類工程實際振動問題的模擬模擬。
分享友人
分享到 Line

分享到臉書