有系桿結構 的英文怎麼說

中文拼音 [yǒuxìgǎnjiēgòu]
有系桿結構 英文
tied structure
  • 有 : 有副詞[書面語] （表示整數之外再加零數）: 30 有 5 thirty-five; 10 有 5年 fifteen years
  • 系 : 系動詞（打結; 扣） tie; fasten; do up; button up
  • 桿 : 桿名詞（桿子） pole; staff
  • 結 : 結動詞（長出果實或種子） bear （fruit）; form （seed）
  • 構 : Ⅰ動詞1 （構造; 組合） construct; form; compose 2 （結成） fabricate; make up 3 （建造; 架屋） bui...
  • 結構 : 1 （各組成部分的搭配形式） structure; composition; construction; formation; constitution; fabric;...
  1. The paper is based on the construction of the express - highway between yiyang and changde in hunan province, aiming at enhancing the serviceability of cement concrete pavement, probing into the structural assemblage of the cement concrete pavement, the roadway drainage system, contraction joint with the dowel bar and precaution of bumping at the end of the abutment. it presents some achievements of the research, including more reasonable structural assemblage and roadway drainage system, the method of setting dowelled bar in contraction joint, putting forward the concept of stage - transition from rigid to flexile behind abutment

    本文以湖南省益陽至常德高速公路項目為依託，以提高水泥混凝土路面使用性能為目標，就水泥混凝土路面結構組合、路面排水系統、縮縫設置傳力桿、橋頭跳車問題的防治等方面開展研究和工程實踐，取得了豐富的研究成果，如研究採用了更合理的路面結構組合，設置了較完善的路面排水系統，在國內高速公路上率先全面採用縮縫加傳力桿技術，對所有橋涵構造物臺背全部採用剛柔過渡技術處理橋頭跳車問題等。
  2. For the rod penetrators used for 30mm naval gun, the structures, the ballistic performance, the penetration and their design are studied systematically. in the paper, the reasonable design of sabot and projectile core is presented and the influence of various factors on ballistic performance of rod penetrators is analyzed. additionally, the optimum design techniques in exterior ballistics for the small caliber fin - stabilized and sabot discarded penetrators are developed

    本文對海30艦炮適用的桿式脫殼穿甲彈的結構特性、彈道特性、穿甲威力及設計方法進行了系統研究，提出了合理的彈芯結構和彈托方案，研究了各種因素對桿式穿甲彈外彈道性能的影響，建立了一套小口徑尾翼穩定脫殼穿甲彈外彈道優化設計方法，並利用該方法在一定的戰術技術要求下對海30艦炮尾翼穩定脫殼穿甲彈進行了優化設計，得到了優化方案，研究結果對海30艦炮以及同類小口徑火炮桿式穿甲彈的設計有重要的指導意義。
  3. We can say that it can develop the usage of soil nailing wall fill the rank of piles disadvantage a bright future of developing and using. the development, application, advantage and disadvantage about the " prestress anchor ribbed beam support system " is introduced in chapter 1 : it " s supporting mechanism and structural feature is introduced and compared with the soil nailing walls and un - embedded rank of piles in chapter 2 ; design and computer steps and more details about the design methods of the support system are introduced in chapter 3 ; the two important parts named draperies and anchors are introduced on their construction technology in chapter 4 ; three foundation trenches " instances with different depth in different soil are showed in the last chapter 5

    本文在第一章概論部分介紹了「預應力錨桿肋梁支護結構」的發展、應用和優缺點；第二章分析其支護機理、結構特點，並與土釘墻和無嵌入排樁多錨支護進行了結構受力對比分析；第三章介紹該支護結構的設計計算方法步驟，詳細介紹了支護結構各部分的設計方法；第四章介紹預應力錨桿肋梁支護系統最重要的兩個部分：帷幕和錨桿的施工技術；第五章介紹了不同土層不同深度的有代表性的三個基坑工程實例。
  4. Include water supply series ( such as drinking bowl, drinking nipple, trough etc ), animal housing & shed construction series, ear mark and ear mark forceps series, injector series ， fodder barrel etc ; our company also engage in agro - machine fittings, and all kinds of other mechanical accessory

    寧波正成機械有限公司專業生產畜牧飼養產品，包括家畜用飲水系列（飲水器，飲水碗，飼料盆等） ，家畜用飼養棚結構；家畜用耳標鉗，注射器，耳標系列；家畜用欄桿絕緣釘系列，飼料桶等；是為眾多大型養殖場設備供貨的專業生產廠家。
  5. Chapter 4 time - dependent computational simulation of the response of cable - suspension feed system in gusty wind based on the time - independent structure finite element method, and with consideration of the movement laws of cabin, a 3 - d time - dependent structure finite element model formulated by a new method named iss method ( instantaneous structure supposition method ) to deal with the vibration response of cable - suspension feed system in gusty wind is presented. in the model, all sources of geometric non - linearity, cable sag and changes of cable geometry due to large displacement, are fully considered

    基於時不變結構的有限單元法，在綜合考慮饋源艙運動規律的基礎上，提出了時變系統的瞬時結構假定法，通過將懸索離散為索桿單元，建立了系統的時變有限元模型，該模型充分考慮了懸索的垂度和大變形等幾何非線性因素，應用ne 。
  6. By emptying the above mentioned theoris and conclusions, this paper introduces detailedly the whole process of the compare and selection of cangzhou city gongrong road canal bridge ' s plan, design calculation and check of structure. the internal force calculation of the bridge adopts the program of plane member system ( bricas ), and it was checked by the program of brcad

    本文最後應用上述理論和結論，以大量篇幅詳細介紹了滄州市光榮路運河橋（下承式鋼管混凝土系桿拱橋）從方案比選到結構設計和計算、驗算的全部過程，以及施工中的要點，本橋內力計算採用平面桿系有限元計算程序， （交通部公規院的《橋梁設計綜合計算程序》 （ bricas4 . 0 ） ） ，並採用空間有限元程序（ brcad2 . 0 ）進行驗算。
  7. The cleaning cars has seven major characteristics : 1, the vehicle design aesthetic appearance generous, simple, flexible cleaner compact cab from the sanitation workers in the rain, snow and inclement weather operations headaches ; 2, jia lu cleaning electric car gearbox is my companys patented products, latin america is characterized by heavy goods, light down - climbing and extended battery life ; 3, jia lu electric bicycle bridge cleaning car brake, the company is a patent product, is characterized by simple structure, convenient operation, maintenance easier, better braking performance ; 4, good deer electric car cleaning dustbins with low human workers the high - school, so that sanitation workers can easily handling, reversing a good sight, and reduce incidents, high safety factor ; 5, good deer electric cleaning trucks advanced electric power putter as a dump, the sanitation workers to reduce labor intensity, is characterized by fewer power failures, maintenance - free ; 6, jia lu electric vehicle using toughened glass cleaning cars, advance reversing have good vision, difficult to scratch and ensure the safety of sanitation workers ; 7, good deer by external electric car cleaning plate, a fiberglass liner internal, external characteristics : hinge not on the plate yi loose, often not dump deformation and withstand collisions, the internal use of fiberglass liner, not rust, corrosion, wear after the liner can be replaced, maintaining low cost

    該保潔車有七大特點： 1 、該車外型設計美觀大方，操作簡單靈活，明凈小巧的駕駛室免除了環衛工人在雨雪等惡劣天氣作業時的煩惱； 2 、佳鹿電動保潔車變速箱是我公司的專利產品，特點是拉重貨，輕松爬坡而且省電，延長電瓶的使用壽命； 3 、佳鹿電動保潔車后橋雙輪制動，是我公司的專利產品，特點是結構簡單，操作方便，維修容易，制動性能好； 4 、佳鹿電動保潔車超低的垃圾箱符合人體工程學的高度，使環衛工人能輕松地裝卸，倒車時具有良好的視線，減少事故的發生，安全系數高； 5 、佳鹿電動保潔車採用先進的電動推桿作為自卸動力，減輕了環衛工人的勞動強度，特點是故障少功率大，免維護； 6 、佳鹿電動保潔車整車採用鋼化玻璃，前進倒車都有良好的視線，不易劃傷，保證環衛工人的安全； 7 、佳鹿電動保潔車外部採用鋼板，內部採用玻璃鋼內膽，外部特點：鉸鏈在鋼板上不易松動，經常自卸不變形，經得起碰撞，內部採用玻璃鋼內膽，不生銹、不腐蝕，磨損后內膽可以更換，維護成本低。
  8. Secondly applying the finite element method, the model of suspension bridge and develops computer software system - sbcs are built in this paper

    其次，應用有限單元法，建立了相應的懸索橋計算模型，利用平面桿系通用有限元計算程序進行結構分析，編制了懸索橋施工控制分析計算系統sbcs 。
  9. The cable - strut tensile structures are the self - stress equilibrium systems composed by tensional cables and struts. in this paper, the basic concept of the structures was described. the analysis methods of the structural characteristics ( statically and kinematically determinate or indeterminate ) and the geometrical stability were presented. it is indicated that the cable - strut tensile structures are in stable equilibrium with first - order infinitesimal mechanisms. the ranks of equilibrium matrix were calculated by employing the singular value decomposition, and the independent modes of inextensional mechanisms and the states of self - stress were also obtained in the same way. this paper contains some typical examples which illustrate all of the main points of the work

    索桿張力結構是指由張力索和壓桿組成的、具有預應力自平衡的新穎結構體系.本文詳細闡述這種結構的基本概念和結構特徵，討論結構靜動定體系特性和幾何穩定性判定分析方法，指出索桿張力結構應具有一階無窮小機構的幾何穩定體系.文中採用奇異值分解方法計算結構平衡矩陣的秩，並計算獨立機構位移模態和自應力模態.最後，對幾種典型的索桿張力結構進行了算例分析
  10. In this paper, ansys, the software on finite element analysis, is made use of processing the static and modal analysis on the preliminary models and its " modified ones. by analyzing the results, we can conclude that the stresses on the components of the modified models are tended to equilibration and the location of the branches " brace can also influence stresses and translations on the branches. in addition, the values of the intrinsic frequencies on modified models " are larger than the ones on preliminary models, but the ranges of the frequencies on both models are almost same

    傳統的弧形閘門的支臂結構基本上都是三角架式的，這主要是因為按平面體系進行計算的傳統設計方法忽略了結構的整體性及弧形閘門的空間結構特點，設計得比較保守，而實際上，將其改為a型結構也存在可行性，本文是利用有限元分析軟體? ? ansys對原模型及修改模型分別進行靜態和固有頻率的計算，通過分析比較其結果可知，支臂改為a型后會使閘門的整體受力趨于均勻，即原模型受力大的部件其應力變小，而原模型受力小的部件其應力會變大；而且a型支臂的支桿在不同的放置位置對支臂的應力和位移變化也有一定的影響。
  11. Generally, the skew bridge ' s calculation theories can be divided into three types : the category 1 is the plank theories method, such as the finite difference method, the finite element method and the finite strip method, etc ; the category 2 is the beam theories, such as the grid beam theories, the general grid theories, the rigid cross - beam method, the elastically - supported continuous beam method and the bar system analytical method, etc ; the category 3 is the practical method, such as the g - m revising method, the grid - beam simple method and ghali form coefficient method, etc

    目前關于斜梁橋的計算理論和方法概括起來，大致可以分為三類：第一類為板理論方法，如有限差分法、變分法、有限單元法、有限條法等；第二類為梁理論法，如格構梁理論、一般格構理論、剛性橫梁法、彈性支承連續法、桿件結構的分析方法；第三類為實用計演算法，荷載橫向分佈的計算方法如g ? m修正法、格構梁的簡易法、 ghali表格系數法等。
  12. In this method, spaces for plant growth are separated from the anchoring bar and shotcrete structures, but they have some mutual relations in following two points : firstly, establishments for plant growth can be fixed by using anchoring bars and shotcrete ; and secondly, water for plant growth can be partly supplied by drainage holes arranged in anchoring bar and shotcrete structures

    在該方法中，供植物生長的空間（包括綠化槽、綠化盆等）與錨噴結構是相互分離的，但在以下兩方面又有所聯系：第一，藉助于錨桿和噴射混凝土來固定栽種植物所需的設施；第二，通過布置在錨噴結構上的排水孔為植物供水。
  13. Finally, the thesis primarily sets up the internal force model of the supporting structure system in the bi - arch tunnel, namely, the distribution model of the surrounding rock ' s pressure, the internal force model of the steel framework and the axial force model of the anchor bolt, and these results can have the guiding significance to the design and construction of the similar tunnel engineering

    最後，結合有限元的理論計算及現場實測數據的分析，初步建立了雙連拱隧道支護結構體系的內力模型，即：圍巖土壓力模型、初期支護鋼拱架內力（主要為軸力和彎矩）模型以及錨桿軸力模型。充分理解和闡述了構件的工作狀態，對今後類似隧道工程的設計和施工具有一定的指導意義。
  14. The foundation engineering is typical in both excavation depth and scale, on the basis of in - situ investigation, the design optimistic of retaining wall was discussioned in this paper, the mian reseaches including : the using of fem optimazition methods of rods system ; the delvopment of programs for optimazition of imbedding depth of structure based on matlab and for whole design optimaziton of the retaining structures based on ansys, under the two controlling factors of the saft coefficient and the reliability probability about the whole damage of retaining atructure ; the analysis on the m index of soil, the depth of retaining structures imbedded in the rock and the overall optimistic design of retaining structures

    該基礎工程不論在開挖深度還是規模上都很具有代表性。作者在現場調研的基礎上，探討了基坑支護結構設計優化問題。主要研究內容可以歸納為：應用基於m法的彈性地基梁桿系有限元方法；在圍護結構整體穩定性安全系數與可靠性破壞概率兩種控制因素下，編寫了嵌巖深度優化的matlab程序與圍護結構整體設計優化的ansys批處理程序；進行了地層抗力比例系數反算、地下連續墻嵌巖深度優化與地下連續墻結構體系整體設計優化。
  15. Considering the state - of - the - art of such kind of structural system, the author gives a simulative analysis of the system with the feiyunjiang bridge in wenzhou zhejiang province as an engineering example using three methods : 3 - d beam or bar fem, classical plate / shell fem and virtual laminated element method. the virtual laminated element method may deals with many key issues in simply - supported - continuous system easily such as the matter of actual material or virtual material, mesh replacement

    針對國內外對先簡支后連續結構體系的研究普遍缺乏深度這一現狀，我們以浙江溫州瑞安市飛雲江大橋引橋為工程背景，運用空間梁桿系有限元、經典的板殼單元法以及虛擬層合單元法對該體系進行了施工模擬分析。
  16. This paper mainly deals with the subjects below : the problem on fem analysis, general reliability analysis and calculation, and optimization based on the general reliability of the random or fuzzy parameters structure ; and also brings forward a method for getting the fuzzy answers from the fem equation by taking the fuzzy multiplier from a fuzzy variable ; in the fem analysis and structural reliability optimization, the randomcity and fuzziness of the structural physical parameters and the load applied on the structures are all considered

    文中對隨機和模糊參數結構在不確定性荷載作用下的結構有限元分析、可靠性分析和基於可靠性的優化設計等問題進行了研究。以桿系結構為對象，提出結構分析的模糊因子方法，其中分別或同時考慮了結構材料的物理參數、構件的幾何尺寸和作用荷載幅值等的隨機性和模糊性；對結構響應（位移、應力）為模糊變量時的廣義可靠度進行了推導。
  17. To investigating the damping effect under other types of ground motion, this paper constituted a three dimensional finite element model, in which the flange is simplified as an elastic joint and the dampers are as bar elements

    考慮到斷路器結構體系可能產生的扭轉效應，本文建立了三維的有限元計算模型。模型中，瓷柱之間的連接法蘭採用較為成熟的彈性連接模型，鉛合金減震器簡化為塑性桿單元。
  18. This article, takes some project for landslip in a small district in zunyi for example, tells you the useful experience of water proof, sueface prevention structure and sticking of the surfaces of mountain slopes, and so on

    摘要文章以遵義小區某滑坡治理工程為例，介紹了滑坡治理中有效解決坡面防水、護面結構與坡面的粘結等問題的實踐經驗，提出了錨桿支護、掛網噴砼、坡腳擋墻襯護、噴面邊界澆築連系梁的綜合治理措施。
  19. Characterizing and analyzing the dynamic properties of the humanoid - robot is one of the key problems in the research field of robot. but at present, the existing mo - deling methods of the humanoid - robot dynamics are based on the theory of traditional multi - rigid - body dynamics, and usually simplifying the system as framework with multi - rigidity poles and simplex joints. for this reason, the walking dynamic perform - ance of the humanoid - robot is pictured only approximately by these methods

    精確地描述和分析系統動力學特性一直是仿人機器人研究方向需要解決的關鍵課題之一，而至今為止，針對此系統的已有建模理論和方法一般是以其結構剛性桿件簡化，以及將桿件以單純鉸鏈聯結成「骨架」為前提，建立在傳統多剛體動力學理論基礎上，這些研究成果由於結構的簡化和多剛體理論的局限，只能近似地反映仿人機器人系統的步行動力學特性。
  20. This paper deals with the following three topics with regard to the control of multiple manipulators : 1. deprive the kinematics and dynamical equations of two manipulators with identical structure on the basis of geometry theory, one of which has two links, giving the inverse solution to the kinematics of the system which consists of the manipulators and the grasped object ; 2. by use of load - distributing, design a controller coordinating multiple redundant manipulators whose parameters are known

    基於微分幾何理論推導出兩個具有相同結構的二連桿機器人的運動學逆解及與物體所成系統的動力學方程； 2在假設由多個冗餘機器人與物體組成系統的動力學模型確知的前提下，利用負荷分配法，設計了一種不僅能使關節力矩優化且能按照一定比例分配負荷的控制器，解決了以往控制器的一些缺陷，即忽視各個機器人的實際承載力，導致一些負荷力小的機器人卻必須承擔較大的負載，最終損壞機器人； 3
分享友人
分享到 Line

分享到臉書