本體聚合工藝 的英文怎麼說

中文拼音 [běntǐjùgěgōngyì]
本體聚合工藝 英文
bulk technique
  • 本 : i 名詞1 （草木的莖或根）stem or root of plants 2 （事物的根源）foundation; origin; basis 3 （本錢...
  • 體 : 體構詞成分。
  • 聚 : 動詞（聚集; 聚積） assemble; gather; get together
  • 合 : 合量詞（容量單位） ge, a unit of dry measure for grain （=1 decilitre）
  • 工 : Ⅰ名詞1 （工人和工人階級） worker; workman; the working class 2 （工作; 生產勞動） work; labour 3 ...
  • 藝 : Ⅰ名詞1 （技能; 技術） skill 2 （藝術） art 3 [書面語] （準則） norm; standard; criterion4 [書面語...
  • 本體 : 1 [哲學]noumenon; thing in itself （德國哲學家康德唯心主義哲學中的主要概念，指與現象對立的不可認...
  • 聚合 : 1 （聚集到一起） get together2 [化學] （單體結合成高分子化合物） polymerization; polymerize 3 [生...
  1. An electroless nickel process with sodium hypophosphite as reducing agents in alkaline bath, which is applied on polyurethane foam substrate, was studied in detail in this paper

    本文採用聚氨酯海綿為基體材料，以次磷酸鈉為還原劑，在堿性化學鍍鎳溶液中對低磷化學鍍鎳磷合金工藝進行了詳細的研究。
  2. By examining the new generation condutive polymer material 3 ， 4 ? polyethylene dioxythiophene ( pedt ), this paper investigated the edt monomer synthetic path and the optimum filming conditions of the compound pedt. based on this research, i also discussed the manufacturing processes and the related principles of the solid tantalum capacitors, when replacing the conventional inorganic material mno2 with the pedt as the negative pole

    本文以新一代導電聚合物材料3 ， 4 ?聚乙烯二氧噻吩（ pedt ）為研究對象，研究了edt單體合成路線及聚合物pedt的最佳成膜條件，並以此為基礎，討論了以導電聚合物有機材料pedt取代傳統的無機材料mno2作陰極的固體鉭電解電容器的制備工藝及相關機理。
  3. The novel vertical carrier - free linear cluster system phoebus for the economical deposition of amorphous and microcrystalline silicon light absorbers by pecvd ideally combines the strengths of proven vacuum production platforms to precisely focus on the needs of solar cell producers : process stability, productivity, yield, footprint, costs of ownership

    新的立式無載體線團系統」菲波斯」 （ phoebus ） ，以pecvd方法經濟地鍍膜無定形的和微晶硅吸光體，理想地結合各種證明可靠的真空生產平臺的優點來精確的聚焦于滿足太陽能電池生產者的需求:工藝的穩定性，生產效率，合格產量率，佔地面積和擁有運營的總成本
  4. We select polyethelyne as fundamental resin, natural scale graphite, expanded graphite by self - made, expanded graphite as conductive fillers to synthesize conductive composite through different techniques of compound mixing. the effects of the conductive composites of different conductive fillers and the different dosage of conductive fillers, different technology and the different dosage of compatibilizer ( mah grafted pe ) were studied respectively

    本論文就是據于這種思考，選用聚乙烯為基體樹脂，天然鱗片石墨、膨脹石墨、膨化石墨為導電填料，通過選用不同的混合方法合成復合導電材料。研究了不同的導電填料及其用量、不同的工藝方法及相容劑的不同用量對復合體系性能的影響。
  5. In this paper, three different kinds of polyazomethines ( pam ) / nylon 6 in situ polymerization composites were prepared using the process of monomer casting. their structures, thermal properties and also mechanical properties were analyzed

    本文利用三種聚甲亞胺的單體與尼龍6單體通過原位聚合反應，制備了三種聚甲亞胺/尼龍6原位聚合復合材料，制備工藝採用澆鑄法。
  6. In order to make the mgb more easy - operating, ultrasonic testing simula - tion software was designed and developed, which has a good user - oriented interface and can simulate easily the inspection fields of planar transducer, focused transducer and angle beam transducer. it also can help inspectors analyze the inspection procedures and predict the feasibility of actual ultrasonic testing, then choose suitable inspection parameters. the side - drill hole and flat - bottom hole are commonly used in ultrasonic

    為了使多元高斯模型使用更加方便，本文設計並開發了基於多元高斯聲束理論的超聲檢測聲場模擬軟體，該軟體具有良好的圖形用戶界面，操作簡單，可方便地實現直探頭、聚焦探頭和斜探頭的檢測聲場模擬，可幫助檢測人員進行檢測過程的分析及結構件的可檢性預測，並選擇合適的檢測工藝參數。
  7. In this thesis two kinds of coupling agents and maleic anhydride ( mah ) grafted polypropylene ( pp - g - mah ) were employed to act as interface compatibilizers for pp / nano - sio2. master batches from pp ( 90 ), nano - sio2 ( 10 ) and coupling agent ( 1 ) were prepared by twin - screw extruder firstly

    本課題選用硅烷偶聯劑、鈦酸酯偶聯劑以及自製的馬來酸酐接枝聚丙烯作為pp sio _ 2復合體系的界面增容劑，採用母粒法擠出工藝制備了改性pp 。
  8. The synthesizing process can be finished in a single kettle. not only technology is very simple, but also the reaction time is shortened, therefore, the production efficiency is obviously increased. the general performances of modified melamine resin superplasticizer jd can be furthermore improved by compounding amino - arylsulphonate phenol formaldehyde condensate superplasticizer hpp

    使用廉價的活性單體尿素取代三聚氰胺單體以降低高效減水劑的生產成本，並將取代量提高到了目前最高水平17 ；合成在一個反應釜中完成，工藝簡單，反應時間縮短，提高了生產效率；本文通過物理改性的手段，即復配氨基磺酸鹽高效減水劑hpp ，可進一步改善改性密胺樹脂高效減水劑的綜合性能。
  9. Focusing on serious damage of carbon fibers in ceramic matrix composites ( cmcs ) prepared by precursor infiltration pyrolysis ( pip ), and with emphasis on carbon fiber reinforced silicon carbide composites ( cf / sic ) derived from polycarbosilane ( pcs ), the influences of raw materials ( including carbon fibers and precursors, etc. ) and preparing conditions on carbon fiber damage during the preparation of cf / sic composites were investigated systemically. pyrolysis process, fiber - matrix interface and carbon fiber damage process were observed by sem, tem, ir, xrd, xps and tq etc. the characterization method of carbon fiber damage degree was established and the models for carbon fiber damage mechanism were also established. the carbon fiber coatings and unidirectional cf / sic composites with coated carbon fibers were prepared and studied

    本文針對先驅體浸漬裂解工藝制備陶瓷基復合材料過程中碳纖維損傷嚴重的問題，以聚碳硅烷（ pcs ）制備cf / sic復合材料為重點，採用sem 、 tem 、 ir 、 xrd 、 xps 、 tg等表徵手段，分析了先驅體裂解過程、纖維基體界面和碳纖維損傷過程，系統地研究了原料（碳纖維、先驅體等）和制備工藝條件等在cf / sic復合材料制備過程中對碳纖維損傷的影響，建立了碳纖維損傷程度的表徵方法和損傷機理模型，制備了纖維表面塗層並利用塗層碳纖維制備了單向cf / sic復合材料。
  10. The synthesis of midbody lactide for the preparation of pla is also catching more attention in this field. the present situation of lactide synthesis is high reaction temperature and low production ratio which lead to its high production cost and hamper its application in the material. the present research hot spot mainly focus on the improvement of reaction technique as well as the selection of catalyst

    制備聚乳酸的中間體丙交酯（ lactide ）的合成也越來越受到重視。丙交酯的合成長期以來存在合成溫度高，收率較低的現狀，以至生產成本偏高，不能比較經濟規模化地應用於材料領域。研究的熱點主要包括丙交酯合成工藝條件的改進，催化劑的選擇與優化。
  11. This paper systemically studies and compares the preparing conditions and polymerizing mechanism of coal / polyanilines ( cp ) of different lithotypes in adding - acid system and in not adding - acid system by utilizing different structure characteristics of different lithotypes

    本文利用不同煤巖組分的不同結構特點，系統的研究和對比在有外加酸體系和無外加酸體系中，原位氧化聚合方法制備煤/聚苯胺導電材料的工藝條件和復合機理。
  12. Herein we employed 3, 4 - polyethylenedioxythiophene ( pedt ) as the polymer material, and tetracyanoquinodimethane ( tcnq ) and tin phthalocyanine ( snpc ) as small molecules. pedt was synthesized using chemical oxidation method. infrared spectrum ( ir ) and scanning electron microscopy ( sem ) were utilized for the characterization of the obtained pedt material and surface morphology of the pedt film

    對于pedt ，本文採用化學氧化法的工藝，探討了工藝對成膜的影響，用掃描電子顯微鏡（ sem ）觀察膜的表面形貌，運用紅外吸收光譜（ ir ）分析驗證了所生成的pedt聚合物，並測量了其電阻隨溫濕度的變化，最後探討了這種材料對兩種氣體的敏感特性。
  13. In view of particular characteristics of polyurethane foam substrate, the paper designed a suitable pre - treatment process and feasible spectrophotometric determining phosphorus and nickel content in deposits

    本文針對聚氨酯海綿基體的特殊性，研究並確定了合適的前處理工藝和鍍層成分鎳和磷分析的分光光度法。
分享友人
分享到 Line

分享到臉書