材料轉移 的英文怎麼說

中文拼音 [cáiliàozhuǎnyí]
材料轉移 英文
transfer of material
  • 材 : 名詞1 （木料） timber 2 （泛指可以直接製成成品的東西; 材料） material 3 （供寫作或參考的資料） ma...
  • 料 : 名詞1 （材料; 原料） material; stuff 2 （喂牲口用的穀物） feed; fodder 3 （料器） glassware 4 （...
  • 轉 : 轉構詞成分。
  • 移 : Ⅰ動詞1. （移動） move; remove; shift 2. （改變; 變動） change; alter Ⅱ名詞（姓氏） a surname
  • 材料 : 1. （原料） material 2. （資料） data; material 3. （適于做某種事的人才） makings; stuff
  • 轉移 : 1 （改換位置） shift; transfer; divert 2 （改變） change; transform 3 [醫學] （擴散） metastasis;...
  1. The composites not only show excellent photo - responsive properties in the visible and near - ir region ( 450 ~ 850 nm ), but also show complementary and synergetic enhancement effects in photosensitivity in the visible and near - ir region. the reasons for the enhanced photoconductive properties and new effects are explained in terms of the partial and directional charge transfer from phthalocyanine to azo compound in these azo / tiopc composites. 2

    研究發現這兩種復合材料體系在可見光區和近紅外光區（ 450 850nm ）均有光譜響應，光譜響應范圍得到了拓寬，並在該波長范圍內都有優良的光電導性能，呈現出明顯的光電導性能協同增強和互補效應，該復合材料體系中酞菁向偶氮發生的部分定向的電荷轉移是光電導性能協同增強和互補效應產生的物理起因。
  2. The air-lock is used when transferring material to and from the glove box.

    當來回從手套箱轉移材料時使用氣閘。
  3. Dsc, uv - vis and cyclic voltammograms studies showed that the enhanced photoconductivity might be resulted from the improvement of the separation efficiency of charge - carrier pairs, and that the decline of photosensitivity was due to the formation of the charge transfer complex of tnf - bah

    本章從電荷傳輸材料復合的角度研究了這種光敏性增強效應和電荷轉移絡合物的形成，為設計和開發新型的有機光電導體提供了一種新途徑。
  4. Meanwhile, through adopting imported environmental materials, all of our product pu, pure pu, tri - layer ventilative cloth, heat transformation materials, etc. are totally accord with eu environmental criteria

    盟環保標準的高品質系列防水熱風膠條pu純pu三層透氣膠帶熱熔膠膜熱轉移材料等。
  5. This paper derived the transfer matrix of the bilayer structure composed of left - handed and right - handed materials, and computed the density of states ( dos ) along the axis of the finite one - dimensional photonic crystal, which was constructed out of n such bilayer structures periodically

    摘要推導出了由左右手材料構成的雙層結構的轉移矩陣，計算了由n個該雙層結構周期性排列所形成的一維有限長度光子晶體沿其軸線方向的態密度。
  6. A novel low mechanical hysteretic ceramic capacitive pressure transducer has been made, by using of ceramic sealing technology ; integrate circuit ( ic ) technology and thick film plane fixing circuit technology. this transducer is made of a deformable ceramic diaphragm and a ceramic base plate, between which has an air cavum. a coaxial gold electrode was fired onto the diaphragm and the base plate

    本文利用新型陶瓷技術、集成電路技術和厚膜平面安裝電路技術，採用零力學滯后的陶瓷和陶瓷密封材料進行設計製造了一種非充液乾式的電容式壓力傳感器，該壓力傳感器由較厚的陶瓷基體和較薄的陶瓷膜片構成，中間形成一空氣介質腔，在基座和膜片之間內置同軸的雙電極，組成兩個電容，當膜片承受壓力時發生位移，使電容量產生變化，經後置處理電路直接轉換為可輸出的直流電壓信號。
  7. The results indicated that, the fabrication process of ultra - fine grain material is mainly determined by the stress, rotate speed and the flux of cooling water. the grain refining and the hardening effect are mostly affected by the rotate speed and the flux of cooling water. compared with commercial ly12, the invalidate strength and the prolongation rate of the ultra - fine grain material are properly improved in the measurement of compression property ; and the abrupt change of the dilatability of the ultra - fine grain material at 500c is found ; also the phenomena of which the grain size of these microstructures is stable when annealed under 300c is observed

    研究表明，採用本文提出的摩擦壓扭強變形區轉移法可以得到棒狀的超細晶材料，軸向壓力、扭轉速度和溫度是採用該方法制備超細晶材料的主控參數；試件的旋轉轉速和冷卻速度對變形區晶粒細化和硬化效果影響顯著；超細晶ly12的壓縮性能與淬火+自然時效狀態的ly12壓縮性能相比，斷裂強度和延伸率均有一定程度的增強；超細晶ly12的熱膨脹系數在550左右發生明顯的變化。
  8. A trend of photo - induced electron transition from p - type pc to n - type organic semiconductor was strongly supported by the data of sps and fisps measurements, the wire - like configuration of the tio2 tubule nanostructure benefited the electron - transport thereby improved the efficiency of the disassociation of the photogenerated carriers

    表面光電壓測試結果表明，復合材料中存在著強烈的從p -型酞菁材料到n -型氧化物半導體材料的光致電荷轉移。而且tio _ 2的納米管和線狀結構提高了電子的傳輸效率最為明顯，使光生電荷的分離得到顯著改善。
  9. The degrees of crystallinity of pure ptfe under the different conditions of water cooling, air cooling and furnace - varying cooling were made comparison by xrd. the thermal stability of pure ptfe and solid lubricant was analyzed by dsc - tg ; the composition and valence state of elements in the surface of carbon fiber, solid lubricant before and after friction test and lubricant transfer film were characterized by xps ; the frictional property of solid lubricant was tested by pin and disk test rig. the frictional wear property of solid lubricant between embedded bearing sleeve and steel axle friction pair ring was tested by special simulate test machine, the hardness of solid lubricant was tested by pm ; the compression strength of solid lubricant was tested by material test machine

    用sem表徵原料微觀結構、摩擦表面及潤滑轉移膜表面形貌：用xrd進行原料物相分析，及比較水冷卻、空氣冷卻、隨爐冷卻三種工藝條件下的純聚四氟乙烯樹脂的結晶度；用dsc - tg分析純聚四氟乙烯樹脂及固體潤滑劑的熱穩定性；用xps表徵碳纖維表面、固體潤滑劑摩擦前後表面、潤滑轉移膜表面的元素組成、價態變化；用銷盤式摩擦磨損試驗機對固體潤滑劑進行摩擦性能測試；採用專用的臺架模擬試驗機對固體潤滑劑鑲嵌軸承套與鋼軸摩擦副間的摩擦磨損性能進行測定；用萊次偏光顯微鏡（ pm ）測試固體潤滑劑的硬度；用材料試驗機測試固體潤滑劑的抗壓強度等。
  10. The results indicated that the dimension, shape and purity of base material could meet the functional demand of solid lubricant ; the thermal decomposition temperature of ptfe resin exceeds 400 c, but organic and inorganic packing filler added in ptfe made the water absorption rate of composite material increased, melting temperature and decomposition temperature decreased, in the meanwhile oxidative decomposition reaction was accompanied ; polar groups such as c = o, c - o - c and so on in the carbon fiber surface is advantageous to increase compatibility with other components and interlayer shearing strength ; uniform design experimental method could help to find the relationship between formula and frictional property by relatively small tests. the developing trend of each formula ' s friction coefficient could be showed by fitting curve ; the friction coefficient with no copper powder or graphite in formula was relatively big. this fact showed that copper powder and graphite should be used cooperatively ; it was found that when the ratio of copper powder to graphite by weight is 15 : 60, 30 : 30 - 40 and 60 : 15 - 30 respectively, the friction coefficient was relatively small. the degree of crystallinity of pure ptfe reached maximum by air cooling and the abrasion loss also reached maximum among three ones ; at the same time, the abrasion loss of solid lubricant sample was also the biggest among three ones ; when solid lubricant matched with 45 # steel axle or gcrl5 steel axle, lubricant transfer film could be formed on metal surface, thus direct contact between the surface of metal friction pair rings was reduced. their working life was elongated extremely ; there was mainly much graphite, a little ptff, moo3, feso4, cus and so on in lubricant transfer film

    試驗結果表明：所選原料的尺寸、形狀及純度可滿足固體潤滑劑的性能要求；聚四氟乙烯樹脂熱分解溫度超過400 ，但在ptfe中加入無機填料會使復合材料吸水率提高，熔融溫度及分解溫度降低，且伴有氧化分解反應；碳纖維表面含有c = o及c - o - c等極性基團，有利於提高其與其它組分的相容性，提高層間剪切強度；均勻設計試驗方法能夠用較少的試驗次數找出配方與摩擦性能間的關系，擬合曲線基本能表示各配方的摩擦系數發展趨勢；配方中不加銅粉或不加石墨，其摩擦系數均較高，說明銅粉和石墨應該配合使用；當銅粉15份、石墨60份時，銅粉30份、石墨30 - 40份時，銅粉60 、石墨15 - 30份時，摩擦系數均具有較低值；純聚四氟乙烯樹脂在空氣冷卻時結晶度最大，磨損量也是三者中最大的；同時，固體潤滑劑試樣在空氣冷卻時的磨損量也是三者中最大的：不論是固體潤滑劑與45 #鋼軸配副或是固體潤滑劑鑲嵌入銅套后與gcr15鋼軸配副，在金屬表面均可形成潤滑轉移膜，從而減少金屬摩擦副表面間的直接接觸，大大延長其使用壽命;轉移膜中主要含有較多的石墨、少量聚四氟乙烯、 moo 。
  11. In the presented study, using h7721 human hepatocarcinoma cell line transfected with sense or antisense cdna of gnt - v, the effects of gnt - v on signal transduction an d its mechanism as well as the alteration of gene expression were investigated. we expected to elucidate whether and how the transfected glycosyltransferase modulate the cell signal transduction and gene expression

    本文以穩定轉染gnt - v正義或反義cdna質粒的h7721人肝癌細胞為材料，從下列四個方面對gnt - v影響信號轉導及其機制以及引起基因表達的變化進行了研究，企圖闡明糖基轉移酶轉染是怎樣調節細胞信號轉導的
  12. Based on the above theory, the fluorinone - based azo was used to prepare the single - layer photoreceptors with fluorinone - based azo / tiopc composites in chapter iv, experimental data indicated that the photoconductivity of fluorinone - based azo / tiopc composite photoreceptors was improved in comparison with that of chlorodiane blue azo / tiopc composite photoreceptors, the amelioration was attributed to the more pronounced electron - acceptor characteristic of fluorinone - based azo, these results further confirmed the mechanism proposed for the synergetic enhancement and complementary effects in azo / tiopc composite systems

    根據激發態下部分電荷轉移機理，本論文第四章選擇具有電子受體特徵比較明顯的芴酮基偶氮制備了芴酮基偶氮/酞菁氧鈦復合單層光電導體，研究結果發現復合材料的光導性能比氯丹藍偶氮/酞菁氧鈦復合體系有所提高，進一步證實了偶氮/酞菁復合材料光導性能的協同增強效應的內在原因。
  13. The advance, the applications in organic light - emitting diodes ( oleds ) and the future r & d directions of the well developed types of organic red emitters, such as transition metal complexes, intra - molecular charge transfer ( ict ) compounds, condensed aromatic hydrocarbons and oligomers are discussed

    本文總結了近年來有機金屬配合物、分子內電荷轉移化合物、稠環芳香類化合物以及齊聚物等幾類有機電致發光紅色發光材料的研究進展，詳細介紹了它們在有機電致發光器件中的應用，並對有機電致發光紅色發光材料未來的研究方向作了展望。
  14. However, the refractive index will increase with the increase of the flow ratio of sifu / nhs, slightly increase with the increase of substrate temperate, and decrease with the increase of rf power. by measuring the passivation results of hydrogen plasma and sinx thin film, we found an evident improvement of minor carrier lifetime in polycrystalline silicon after hydrogen plasma treatment, although it has little to do with the annealing temperature and time. the hydrogen contained in sinx thin film can enhance the carrier mobility of monocrystalline silicon, but after annealing at high temperature the mobility turns down

    通過測試氫等離子體鈍化和氮化硅薄膜鈍化的效果，實驗還發現氫等離子體處理對多晶硅材料的少子壽命提高作用比較明顯，但是這種提高作用與處理溫度以浙江大學碩士學位論文王曉泉2003年5月及時間的關系不大；氨化硅薄膜中的氫對單晶硅的載流子遷移率提高有一定作用，但經過高溫處理后這種作用消失；氮化硅薄膜能提高單晶硅和多晶硅的少子壽命，具有表面鈍化和體鈍化的雙重作用；氫等離子體和氮化硅薄膜都能有效地提高單晶和多晶電池的短路電流密度，進而使電池效率有不同程度（絕對轉換效率0
  15. This simple computer cutting machine is mainly used for block foam abnormity cutting, two or three dimensional polyurethane foam or similar materials, as adopt special frame movement and worktable rotate, has a good advantage of occupying area small ( only half the area of the same style cutting machine ), product efficiency high school workman can operate freely after training ), so product widely used in modern commercial varies field, such as heat preservation materials, furniture, mattress, packing and other industrial usage

    這種機器主要用於發泡后的塊片狀泡綿的異形切割、裁及切片，兩維或三維的各種形狀的聚氨脂軟泡或類似材料，由於採用獨特的機架移動及工作臺旋轉方式，具有佔地面積小（僅占同型號工作臺移動切割機的二分之一） ，生產效率高（是同型號工作臺移動型效率的數倍或十數倍） ，切割精確、操作簡便（具有初中以上文化的工人經培訓就可操作自如）等優點，產品在現代商業許多不同領域中得到廣泛應用（如：保溫材料、傢具和床褥的墊、各種汽車用品、包裝及其它工業用途。
  16. Presents the investigation of the heat conduction behavior, internal thermal stress field of specimen under thermal shock and microscopic damage and failure of the tungsten based composites by combination of macroscopic and microscopic analyses and integration of material science and mechanics ; describes a microscopic mechanical model based on the microstructure of components with macroscopic stress applied to the microscopic model as that of maximum principal stress at the center, and the fringe of the specimen, and the microscopic stress fields obtained through calculation by the finite element method, and concludes from test results that the maximum principal stress is first generated inside the test coupon, and a failure will be first initiated in the inclusion if the material fails at this time ; the maximum principal stress moves to the edge of the test coupon after the test coupon is heated for a period of time, and the failure will first be initiated in the base if the material fails at this time

    從材料設計的思想出發，採用宏觀與微觀、材料科學與力學相結合的方法，對鎢基復合材料的熱傳導行為、材料在熱沖擊載荷下的內部熱應力場及材料細觀結構的破壞行為進行了詳細的理論研究.根據鎢基復合材料的細觀組織結構建立了材料細觀模型.在宏觀分析的基礎上，分析了材料微結構內部的破壞行為.分別取試件心部與邊緣主應力值最大點的應力狀態，施加在所建立的模型上，用有限元方法計算了模型內部的彈性應力場.結果表明：試件主應力最大值首先產生在試件內部，此時，如果材料發生破壞將先從夾雜中開始；加熱一段時間后試件中的最大主應力值轉移到試件邊緣，此時材料發生破壞將先從基體中開始
  17. _ incremental form of evolution law of domain switching is developed by taking the volume fraction of domains as key intrinsic factors. the main factors that have great influence on domain switching are material parameters, domain wall motion, domain volume fraction and the interaction energy between inclusion and matrix. inclusion and its neighbors could be addressed in the description as well

    ? ?建立了以電疇翻轉時的體積分數增量為中心的，基於鐵電疇壁運動特性的剩餘應變及電位移的增量形式的演化方程，在其中包含有材料參數、疇壁運動、電疇形式、電疇體積分數及基體與夾雜、夾雜與夾雜等相互間能量作用等影響因素。
  18. The results of the limited element analysis and experiment study confirms that both the resisting ended batten and using angle batten in place of plate one could make the laterally stiffness of such member more strong. that maybe provides somewhat practical benefits for designing the twin - wall truss

    本文還通過矩陣分析法和模擬試驗研究，證實了端綴板的存在對抵抗側向屈曲有明顯提高；而選用角鋼代替綴板材料相對于板形板，有助於提高構件的側移剛度和翹扭轉剛度，這對于單軸對稱綴板柱的設計也具有一定的實用價值。
  19. Manage the timely receipt, materials movement and shipment of raw materials and finished goods. cooperate with production department and purchasing dept. for the production plan and purchasing plan

    管理收據、物料轉移，以及成品和原材料的發送，配合採購與生產制定相關計劃。
  20. Materials and articles in contact with foodstuffs. plastics substances subject to limitation. guide to the test methods for the specific migration of substances from plastics into food and food simulants and the determination of substances in plastics and the selection of conditions of exposure to food simulants

    與食品接觸的材料和物品.限制使用的塑料材料.由塑料轉移至食品和食品模擬物的特定轉移的試驗方法指南及塑料中物質的測定和暴露于食品模擬物的條件選擇
分享友人
分享到 Line

分享到臉書