材面接合 的英文怎麼說

中文拼音 [cáimiànjiēgě]
材面接合 英文
face joint
  • 材 : 名詞1 （木料） timber 2 （泛指可以直接製成成品的東西; 材料） material 3 （供寫作或參考的資料） ma...
  • 面 : Ⅰ名詞1 （頭的前部; 臉） face 2 （物體的表面） surface; top 3 （外露的一層或正面） outside; the ri...
  • 接 : Ⅰ動詞1 （靠近;接觸） come into contact with; come close to 2 （連接; 使連接） connect; join; put ...
  • 合 : 合量詞（容量單位） ge, a unit of dry measure for grain （=1 decilitre）
  • 接合 : joint; zygosis; juncture; articulation; concrescent; nexus; coaptation; syndesis; synapsis; meet;...
  1. The small packing adhesive, which is a modified product from ethylene - vinyl acetate copolymerized emulsion, has high solid content, low viscosity, and good adhesive strength. the product is up to the standard of foodstuff hygiene and suitable for the small package of the cigarette packing production line with stable adhesive application and the making speed up to 400 packs per minute. type i is for white card paper, while type ii is for golden card paper

    小盒包裝膠系乙烯-醋酸乙烯共聚乳液改性產品，具有高固含低粘度粘接力強等特點，產品符合食品衛生標準，適用於卷煙卷包生產線的小盒包裝，施膠穩定，無開包等不良現象，車速可達400包分，型為白卡紙專用膠，型為金卡紙專用膠，具有極佳的初粘力和持粘力，對非極性材料的光滑表面有獨特的優良粘接性能，對各種難粘材料均可適用。
  2. Tensile properties and impact properties measurements were done at room temperature. the volume resistivity of rectangular samples was measured using a zc36 electrometer and a high 240a voltage supply, for samples with a low resistivity level a dt - 9205b digital multimeter was used, silver paint was applied to ensure complete contact between sample and electrodes, namely, to eliminate the contact resistance. the phase morphology of blends was also studied using a jeol jsm - 5900lv scanning electron microscope ( sem )

    體積電阻率的測定：當r _ v 10 ~ 8時，製成100 100 4mm板材，用zc36型高阻儀測量；當r _ v 10 ~ 8時，用dt - 9205b型數字式萬用表測試試樣的體積電阻，為了減小接觸電阻對測試的影響，採用銀導電膠將銅片粘接在試樣的兩個端面上，靜置24小時，待銀導電膠凝固，試謝長瓊:熱拉仲對pet / pe / cb復合導電體系形態和性能的影響樣的電阻穩定后再測量。
  3. Our products include tweezers, eyelash curlers, razors shavers, nail clippers nail cutters, emery boards, nail buffers, nail files, foot files, callus rasps, cuticle pushers, manicure and pedicure instruments, earpicks ear cleaners, personal care kits, manicure sets, pedicure sets, electric nail clippers electric manicure kits, electric toothbrushes, electric shoe wiping machines electric shoe brushes, cosmetic pencil sharpeners, blackhead removers acne extractors, beauty scissors vibrissa scissors eyebrow scissors, thinning scissors hairdressing scissors, manicure scissors cuticle scissors, travel scissors folding scissors, children s safety scissors kid s scissors, stationery scissors office scissors, household scissors, garden shears pruning shears pruners, kitchen shears, tailors shears sewing shears, yarn scissors, folding knives pocket knives lock knives, hunting knives, fantasy knives and swords, nutcrackers macadimia nut crackers lobster crackers, mousetraps rattraps, copper bells, etc. for more information, contact johnson liu now

    我銀帆實業公司是一家外向型生產企業，以接單貼牌生產為主。經十多年滾動發展，產品品種繁多，主要有剪刀睫毛翻卷夾眉毛夾個人護理及電子行業縫紉行業用鑷子剃刀指甲銼腳皮銼指甲鉗各式美容護理組合修甲套裝電動修甲器電動牙刷電動擦鞋器耳扒粉刺用具等產品。有碳鋼不銹鋼鐵銅鋁鋅合金塑料等不同材質鍍鉻鍍鎳鍍金浸塑電泳等多樣表面處理方式公制美製英制等數種標準規格吸塑塑卡袋卡掛袋掛架木座彩盒透明盒泡罩盒植絨盒搭扣包拉鏈包簡裝禮品裝等各類包裝任您選擇。
  4. The particles distributed hi the matrix of grey cast iron, but some contact each other. the composite layer extend gradually into the substrate. when volume fraction of wc is 36 wt % and 27 wt %, the matrix of the composite is high chromium cast iron, consist of white carbide bars and the austenite. wc particles distributed uniformly, retaining approximately quondam granular form in the composite layer which has an evident interface area with the substrate, with good bonding strength

    對不同碳化鎢體積分數的灰鐵和低鉻鑄鐵基復合材料的微觀組織結構分析表明：碳化鎢體積分數為52時，復合層內基體為灰口鑄鐵組織，顆粒直接分佈在灰鐵基體上，部分碳化鎢顆粒有相互接觸的現象，基材與復合層之間沒有明顯的過渡；碳化鎢體積分數為36 、 27時，復合層內基體為高鉻鑄鐵，由面塊狀的奧氏體和白條狀碳化物組成，碳化鎢顆粒表面固溶於基體組織中，粒形基本保持完整，分佈均勻，與基體構成冶金結合，基材與復合層之間存在一個明顯的平緩過渡區。
  5. Bonded composite repair technology has been proven to be very successful and practical in repairing the cracked metallic components of aircraft structures and extending the service life of aging aircrafts

    摘要在修補含裂紋損傷的飛機金屬結構和老齡化飛機延壽方面，復合材料膠接修補飛機金屬結構是一門實用有效的技術。
  6. 1, product uses : wall panels, ceiling panels, fire panels, waterproof panels, boxes, etc., can be substituted for wood plywood so qiangqun, doors and windows shutter panels, furniture, etc., as well as by the need to reconcile painting, water painting, and processed into various types of panels face and can be used for the basement, air and mine, moist environment works, but also with a variety of heat preservation material composite, manufactured composite food warming plate 2, product characteristics : bolivia has a magnesium plates withstand high temperatures, fire, acoustic vibration, waterproofing curing, pest control, light corrosion, drug - free tasteless clean, the paint can be directly with noodles, available gas nails, direct, tiles, surface better color

    1產品用途：墻板，吊頂板，防火板，防水板，包裝箱等，可替代木質膠合板做墻裙，門窗板門板，傢具等，也可根據需要做調和漆，清水漆，並可加工成各種類型的板面，同時可用於地下室，人防和礦井等潮濕環境的工程，還可以與多種保溫材料復合，製成復合保溫板材2產品特性：玻鎂板具有耐高溫阻燃吸聲防震防水防潮防蟲輕質防腐無毒無味無污染可直接上油漆，直接貼面，可用氣釘直接上瓷磚，表面有較好的著色性。
  7. Since all materials are subjected to expansion and contraction, " expansion joints " must be provided in any large structure to adapt to the change of temperature with the season, or even with day and night, otherwise the force of expansion would cause the structure to bend or break

    由於所有的材料都要經受膨脹和收縮，在任何大的建築中都需要提供「伸縮接合面」 ，以適應隨著季節甚至晝夜的改變而產生溫度的變化，否則膨脹力就會引起建築彎曲或斷裂。
  8. With an aim to identify dominating processing factors as well as their functional relationship thus to facilitate novel bimetal roll - bond process development, this work presents the problem of bimetal roll - bond process on the base of slip line fields theory through tribo - thermodynamics

    摘要為條理出製程參數之函數關系，作為開發雙金屬固態輥壓接合新製程之參考，本文在既有之滑線場理論基礎上試從磨潤熱力學之角度探討雙金屬輥壓製程中母材介面之質互動問題。
  9. Tungsten and graphite, which have high melting point, can be used as thermal resistance materials, while copper and copper alloys, which have high thermal conductivity, can be used as cooling material

    鎢、石墨均具有高熔點，可作為耐高溫材料;銅合金具有良好的導熱性，可作為冷卻材料。本文對w與cu合金tlp連接及石墨表面鈦金屬化進行了研究。
  10. In order to solve the singular stress fields in tips of bonded dissimilar anisotropic materials, a novel hybrid element model is established

    摘要為了求解各向異性接合材料界面端部奇異性應力場，建立了一種新型雜交元模型。
  11. 2. eigenequation about singularity, singular stress fields and electrical displacement fields near the axisymmetric interface edge of two bonded dissimilar transversely isotropic materials are obtained under axisymmetric distortion. 3

    然後，考慮電學物理量的影響，將上述特殊有限元法應用於壓電/壓電以及壓電/彈性接合材料界面端奇異性的求解。
  12. Eigenequation about singularity, singular stress fields and electrical displacement fields near the interface edge are obtained under axisymmetric distortion. finally, a special finite element formulation which is based on the principle of minimum potential energy has been developed for determining the orders of the singularity of the singular stress fields around the singular point ( interface edge, interface corner and the interface crack ) in the bonded dissimilar anisotropic / anisotropic, piezoelectric / piezoelectric as well as piezoelectric / anisotropic materials. the numerical results show that this method is very convenient and efficient

    最後，從最小勢能原理出發，在僅僅考慮奇異性支配區域這一前提下，對于彈性接合材料的平面變形問題和擬平面應變問題，以奇異點為原點分別建立極坐標系和圓柱坐標系，通過分部積分消除廠項，從而使奇異性問題的求解由原來的二維降為一維；對於三維變形問題，以奇異點為原點建立球坐標系，通過分部積分消除項，從而使奇異性問題的求解由原來的三維降為二維。
  13. The fitness of four negative electrode materials such as al, fe, zn, cd, and of six membranes materials : microfiber glass mat separator, polyethylene, polypropylene, polyvinyl chloride, vinylon, soapnated cellulose acetate, and of four current collects : carbon fiber ; nickel foam ; nickel foam sthongthened by iron wire net, punched silver grid in the super - iron alkaline batteries was comparatively studied. the influence of two storaged method ( with and without electrolyte ) and two impurities ( zno, fe ( oh ) 3 ) to the experiment cell ' s self - discharge nature was also comparatively studied. at last, the nature of discharge. structure and electrochemistry of experimental cell with k2feo4 as cathode active material prepared by three different methods : high temperature reaction, hypochlorite oxidizing and electrolysis, was comparative ly studied. we can conclude : i ) the open - circuit potential and the flat of work potential and the percent of capacity of k2feo4 till 1. 0v during the discharge at constant load of experimental cells decreased by the order of al / k2feo4, zn / k2feo4, cd / k2feo4, fe / k2feo4. as for the nature of charge - discharge cycle, cd / k2feo4 fe / k2feo4 zn / k2feo4. in water solute electrolyte, although al / k2feo4 can n ' t be used as storage battery, it have great potential as primary cell or storage cell from the aspect of its discharge capacity. discharge power

    採用組裝實驗電池、 x -射線衍射（ xrd ）和循環伏安（ cv ）的方法，從實驗電池的放電特性、充放電循環特性、自放電特性，不同高鐵酸鹽的結構特性和電化學特性幾個方面，對4種金屬負極材料（ al 、 fe 、 zn 、 cd ） 、 6種隔膜材料（復合玻璃纖維、幅射接枝聚乙烯、改性聚丙烯、聚氯乙烯、維尼綸無紡布、皂化再生纖維素） 、 4種集流體材料（泡沫鎳、以鐵網為加強層的泡沫鎳、切拉銀網、炭纖維編織網）在堿性高鐵電池中的適用性進行了比較研究；對2種雜質組分（ zno 、 fe （ oh ） _ 3 ）和2類不同貯存方式（干、濕）對實驗電池自放電特性的影響進行了比較研究；對3種方法（高溫固相反應、次氯酸鹽氧化、直流電解）所制k _ 2feo _ 4的實驗電池的放電特性、結構特性和電化學性能進行了比較研究。
  14. Irradiation graft copolymerization becomes a green and important synthetic strategy for surface functionalization and facile preparation of new organic biomedical materials

    摘要-射線輻射高分子材料表面接枝共聚合是一種綠色的、重要的有機生物材料合成制備方法。
  15. Because of the different material property of the piles and soil, shear stress is produced on the contact surface between piles and soil, which may cause slide and crazing of the soil mass under workload. in order to reflect the mechanical character precisely on the contact surface, a new kind of element, plane - plane contact element is introduced. the principle of the process is presented in detail and the finite element model is established with the consideration of the soil ' s elastoplastic constitutive relation

    由於樁體結構的材料性能與周圍土層性質相差較大，在荷載作用下有可能在其接觸面上產生較大的剪應力從而導致錯動或開裂，為了充分反映樁土接觸面上的受力及變形特徵，考慮樁土之間的共同作用，在樁土接觸面處設置面面接觸單元，將採用接觸單元和不採用接觸單元兩種演算法的計算結果與模型試驗結果進行比較，驗證了本文接觸界面處理的合理性。
  16. This paper mainly analyzed sn - cu eutectic solder alloys ' research production of wetting characteristics and their tensile property, shear property, creep property, fatigue property and thermal fatigue property when the block of sn - cu eutectic solder alloys joined by backing

    摘要主要敘述了錫銅合金的潤濕性質以及它們的塊材與基材連接時的拉伸特性、剪切特性、蠕變特性、疲勞特性及熱疲勞特性等方面的研究結果。
  17. The influences of interfacial condition and reinforcement on the asphalt pavement behavior under symmetrical, eccentric loads or loads with horizontal

    土工筋材與上下瀝青面層、半剛性基層的界面結合狀態直接影響到其加筋效果的發揮。
  18. Logarithmic singular stress field in an interface edge consisting of two bonded dissimilar materials subjected to a concentrated couple on apex

    頂端受集中力偶的雙材料平面界面接合楔體的對數奇異應力場
  19. On the basis of measured results of contact pressure on abundant literature and the computed results in this paper, simplified contact pressure models have been put forward. the finite element program msc. nastran was selected to analyze the response of pavement under the two modelled loads. the effects of axle load and material properties were studied, and the effects of truck load on permanent deformation and fatigue crack were also discussed

    本文首先根據輪胎胎面花紋類型的不同，提出接觸面的簡化模型；然後參考相關輪胎與路面接觸壓力的測試結果，並結合本文的測試結果及輪胎與路面接觸壓力的模擬計算結果，提出接觸面內的壓力分佈模型，即輪胎作用於路表的荷載簡化模型；接著利用有限元軟體msc . nastran對瀝青路面在該荷載模型作用下的響應進行計算分析，還討論了軸載的變化及路面材料參數的變化對路面結構響應的影響，並且對車輛荷載對車轍和疲勞裂縫的影響進行探討。
  20. 6, turn son to carry noodles to seal completely an adoption adjustable seal completely device, from compound material and metal alloy inside of circle wreath get in touch with, donot need lubricant lubrication, sealing completely function good, structure simple, adjust to maintain convenience. turned bearings in order to roll over bearings, use the function good life span to grow

    6轉子端面密封採用可調密封裝置，由復合材料與合金圈內環接觸，不需要潤滑油潤滑，密封性能良好結構簡單調整維修方便。轉了軸承為滾動軸承，使用性能良好壽命長。
分享友人
分享到 Line

分享到臉書