氣動力軸 的英文怎麼說

中文拼音 [qìdònglìzhóu]
氣動力軸 英文
aerodynamic axis of airfoil
  • 氣 : Ⅰ名詞1 （氣體） gas 2 （空氣） air 3 （氣息） breath 4 （自然界冷熱陰晴等現象） weather 5 （氣味...
  • 力 : Ⅰ名1 （力量; 能力） power; strength; ability; capacity 2 [物理學] （改變物體運動狀態的作用） forc...
  • 軸 : 軸Ⅰ名詞1. （圓柱形的零件） axle; shaft 2. （對稱部分的直線） axis 3. （圓柱形的纏繞器物） roller; spool Ⅱ量詞（用於纏在軸上的線以及裝裱帶軸子的字畫）
  1. The aerodynamic forces on any control surface produce a moment about the hinge.

    在任何操縱面上的空氣動力均產生圍繞其鉸鏈軸的力矩。
  2. Auto parts : fuel injection system ( valve follower, plunger piston and fuel injection needle, etc. ), power train ( gear, rolling bearing etc. ), piston parts ( packing ring, gudgeon pin etc. ), cam shaft parts ( pin, bush, oscillation beam and some hydraulic components etc. ), others ( gate lock, accouterment etc. )

    汽車零部件：燃料噴射系統（氣門挺桿） 、柱塞、噴油針等） 、動力傳動系統（齒輪、滾動軸承等） 、活塞部件（活塞環、活塞銷等） 、凸輪軸部件（銷、襯套、搖臂及部分液壓元件等）和其他部件（如門鎖、內飾等） 。
  3. In the chapter 3, algor feas ( also called super sap ), a commercial fem software is introduced ; several. problems in building the finite element model of a auto frame is researched ; taking advantages of fem and mathematic programming, a strength analysis method of the frame of a series multi - spindle hydropneumatic suspension automobile is proposed ; taking the structure and load characteristic of a missile ' s frame into account, the static, eigenvalue and response analysis have been made by using super sap91

    第三章簡要介紹了大型有限元軟體sap91 ；對車架有限元建模及分析中的若干問題進行了討論；利用有限元法和數學規劃法相結合，提出了一種串聯多軸油氣彈簧懸架車輛車架強度分析的方法；針對某導彈發射車車架的結構和載荷特點，利用sap91軟體對其進行靜力分析、特徵值分析和動力響應分析。
  4. We can use the mm5 model in definite time, definite area weather forecasting. we conclude that : : the moving route of this necw in its developing progress was direct - south along latitude, the cold air is rough, and just this made the rough vertical velocity ; the necw southern moving and conflicting with the west pacification sub - tropical high makes rough jet steam. the plenty south - west warm and wet air made by the jet stream gave the rainstorm demanded vapor ;. the rough vertical velocity by jet stream is a main reason in this rainstorm ; the mm5 model uses four - direction analysis data as its input, this avoids some errors occurred in observe and transfer, thus made the result more useful

    綜合分析認為： （ 1 ） 、這次冷渦在其發生發展過程中，其移動路徑是沿經圈直線南壓，攜帶的冷空氣勢力較強，形成槽后較強的垂直運動； （ 2 ） 、西太平洋副熱帶高壓偏北位置與東北冷渦南壓形成的急流軸，把源源不斷的西南暖濕氣流輸送到遼西地區，也就是急流軸的左前方位置，為這次暴雨的產生提供了充足的水汽來源； （ 3 ） 、低空急流不但為暴雨輸送水汽，其造成的較強的垂直環流也是產生強降水的一個主要原因； （ 4 ） 、 mm5模式以四維同化資料作為初始場，最大限度地避免了觀測誤差可能造成的積分不穩定，提高了模擬結果的參考價值。
  5. A component level aerothermodymamic model of a turbofan aeroengine is created in this thesis using oo technology

    本文基於面向對象技術建立了某型雙軸渦扇航空發動機的部件級氣動熱力模型。
  6. Wj6 turboprop engine for medium transport aircraft ; wz8 series turboshaft engines for light helicopters ; hs6 series piston engines for small - sized transport and agricultural aircraft ; wj6g1 and wj6g4 series as turbines for industrial and marine application etc

    用作中型運輸機動力的渦槳6發動機，用作輕型直升機動力的渦軸8系列渦輪軸發動機，用作小型運輸機農用機動力的hs6系列產品，用作陸用海上的燃氣輪機動力渦槳6g1渦槳6g4系列產品等。
  7. Aerodynamic axis of an air foil

    空氣動力軸
  8. Proceed from the angle of energy and taking considerations on interference factor and drag of airfoil profile, a kind of new typed calculation method on the design of vane air foil was put forward according to the vortex aerodynamics model of the rotor of wind turbines with horizontal axis

    摘要根據水平軸風力機轉子的渦流氣動模型，從能量的角度入手，考慮干涉因子和翼型阻力，提出了葉片翼型設計的一種新型計算方法。
  9. This thesis has researched the design and control of a new triaxial air - bearing experimental system. in this thesis, the attitude determination and the attitude dynamics and control of the system was focused on

    本文對新型的三軸氣浮轉臺進行了設計與控制研究，重點研究了系統的姿態確定及動力學與控制問題。
  10. In order to investigate the unsteady flow frequency domain performances of an axial flow compressor at different mass flow, rotating speed and blade row spacing, plus inlet flow distortion, and considering aerodynamic characteristics and stability of the compressor, the low speed research compressor ( lsc ) at college of energy and power in nuaa is used to carry out the experiment studies. a large amount of test data has been gained through dynamic pressure transducers embedded in the stator blades at the tip, middle and hub section, then fast fourier transform algorithm ( fft ) is applied to calculate the frequency data

    為探討軸流壓氣機在工作流量、工作轉速及動?靜葉排軸向間距變化時的葉片排流場非定常頻譜特性變化規律，並耦合進氣畸變的影響，同時與壓氣機氣動性能和氣動穩定性相關聯，作者利用南京航空航天大學能源與動力學院的低速大尺寸軸流壓氣機（ lsc ）試驗器，採取在靜子葉片表面埋入動態壓力傳感器的實驗方法，對葉尖、葉中和葉根三個截面的動態壓力進行了測量，獲得了大量的可靠的實驗數據。
  11. Petroleum and natural gas industries - flexible couplings for mechanical power transmission - special purpose applications

    石油和天然氣工業.機械動力傳輸用撓性聯軸器.專用設施
  12. Aerodynamics - concepts, quantities and symbols. part 2 axis systems and aircraft motion state quantities

    空氣動力學概念量和符號第2部分坐標軸系和飛行器運動狀態量
  13. Research of unsteady aerodynamic force and oscillating flow field around cascade on shafting torsional vibration

    軸系扭振條件下葉柵振蕩流場研究和非定常氣動力的確定
  14. In addition, it is useful in some places that contain harmful air and air is needed is needed to input. on the other hand, based on the theory of aerodynamics, the optimum structural factors for contra - rotating axial local fan are studied

    根據軸流式通風機空氣動力學理論，在分析了普通軸流式通風機的結構對氣動力性能參數影響的基礎上，對對旋式軸流通風機的有關氣動力參數和結構參數進行了綜合優化分析研究。
  15. On the basis of analyzing the aerodynamical property and the construction of usual axial fan, the aerodynamical property and the construction of contra - rotating axial local fan are studied in the paper. moreover, author has designed a kind of contra - rotating local fan, which has the characters of low noise, high efficiency, well aerodynamical performance, optimum structure, and large power

    本文在分析了普通軸流式通風機的氣動力特徵和結構的基礎上，研究了對旋式軸流通風機的氣動力特性和結構特點，設計並製造出了一種風量大，風壓高，噪聲低，效率高，氣動性能好，體積小，結構新穎的2 30kw新型大功率對旋式軸流局部通風機樣機。
  16. This paper presents the development and preliminary application works of an automatic strain gauge balance static calibration system in ecs for 1m hypersonic wind tunnel of cardc

    本文論述了cardc超高速空氣動力研究所1m高超聲速風洞配套的新型全自動六分量應變天平地軸系（ ecs ）校準系統的研製和初步應用研究工作。
  17. According to the study work of this paper, an automatic six - component strain gauge balance calibration system development scheme was put forwards : the system calibrates the balances in the ecs, and translates the loads to the bcs of the balances with measuring the balance ’ s position changes during the calibration

    本文根據1m高超聲速風洞氣動力試驗的總體要求，提出了採用天平校準載荷地軸系全自動加載、並通過天平空間位移測量將校準載荷換算到天平體軸系（ bcs ）的六分量天平校準系統總體研製方案，並確定了詳細的技術指標。
  18. Through the analysis of attitude dynamic equation, how to realize three axis passivity stabilization of the mircrosatellite by just using environmental torque is presented. three sorts conformations of three axis passivity stabilization of the mircrosatellite by using environmental torque are put forward, one is to realize the passive attitude control of microsatellite by using the aerodynamic moment and the gravity gradient, the other two by making use of the gravity gradient and the geomagnetic moment, the attitude dynamics of microsatellite of the three sorts are analysed in detail

    通過對衛星姿態動力學方程分析，給出如何利用環境力矩實現微小衛星三軸姿態被動穩定，並提出三種利用環境力矩實現微小衛星三軸姿態被動穩定方案，即一種利用氣動力矩和重力梯度實現微小衛星三軸姿態被動穩定方案和兩種利用重力梯度和地磁力矩實現微小衛星三軸姿態被動穩定方案，對採用這三種方案的衛星的姿態運動進行詳細分國防科技大學研究生院學位論文析。
  19. Aerodynamic center axis

    氣動力中心軸
  20. Motor vehicles need energy to accelerate ( overcome inertia ), to push the air out of their way ( aerodynamic drag ), and to overcome the friction from tires, wheels and axles ( rolling resistance )

    帶發動機的車輛需要能量進行加速（克服慣性阻力） ，推開路上的空氣（空氣動力學拖曳力） ，並克服輪胎、車輪和車軸的摩擦力（滾動阻力） 。
分享友人
分享到 Line

分享到臉書