淬火回火 的英文怎麼說

中文拼音 [cuìhuǒhuíhuǒ]
淬火回火 英文
quench tempering
  • 淬 : 動詞（淬火） temper by dipping in water, oil, etc. ; quench
  • 火 : fire
  • 回 : 回構詞成分。
  1. There are three main operations in the heat treatment of steel: hardening, tempering and annealing.

    鋼的熱處理操作主要有三種，即：淬火，回火和退火。
  2. Three : they are hardening, temper and anneal

    三個過程：它們是淬火、回火和退火。
  3. Medium frequency induction heating equipment are used in metal melting, temperature keeping, diathermic technology, metal - heat processing brass soldering, quenching, tempering and sintering

    中頻感應加熱設備適用於各種金屬熔煉，保溫，透熱，金屬熱處理，釬焊，淬火回火，燒結，釬絲鋼絲等。
  4. Induction heated oil tempered spring wire is a kind of new technical material which has been developed since 1980s. it can be heated by means of eddy induced into itself through electromagnetic coil and this method is mainly used in surface quenching. with correct designing and reasonable current frequency, induction coil and heat treatment process selected, as well as plc controlling applied, the wire can be uniform heated along cross - sectional and longitudinal direction and can be quenched and tempered continuously

    應加熱油淬火-回火彈簧鋼絲，是二十世紀八十年代發展起來的新技術材料，在國外稱為itw induction heat oil tempered spring wire 。是通過線圈電磁感應鋼絲本身產生的渦流進行加熱，通常主要用於表面淬火。經正確設計，選擇電流頻率，合理的感應線圈及熱處理工藝，並實施plc控制，可使鋼絲整個截面及長度上得到均勻加熱，進行連續整體淬火和回火。
  5. Process features characteristic of induction heat oil tempered spring wire

    感應加熱油淬火-回火線材特點
  6. Carburizing or carbonitriding and post - quenching and tempering of steel part

    鋼件的滲碳與碳氮共滲淬火回火
  7. Hot - rolled wire rod for quenched and tempered springs

    油淬火-回火彈簧鋼絲用熱軋盤條
  8. Induction hardening and tempering of iron and steel parts

    鋼鐵件的感應淬火回火處理
  9. Today, salt - bath stove is still one of the main heating equipments in the heat - treating workshops

    鹽浴爐是熱處理車間的主要加熱設備之一，多用於零件的淬火、回火、正火等處理。
  10. Oil - hardened and tempered stell wire for mechanical springs

    油淬火回火彈簧鋼絲
  11. Frame hardening and tempering of iron and steel parts

    鋼鐵件的火焰淬火回火處理
  12. This paper analyzes and compares the ordinary heat treatment technology of q275 steel knuckle pivot pin with the quenching and backfiring technology

    摘要分析、比較了q275鋼鉤尾銷普通熱處理工藝與鍛熱淬火回火工藝。
  13. Actual practice shows that the heat forging and backfiring technology can remarkably improve the mechanical performance and consume less energy

    通過實踐證明，採用鍛熱淬火回火工藝后力學性能明顯提高，能源消耗顯著減少。
  14. Study on 17cr2ni2moa carburizing and quenching amp; amp; tempering process

    滲碳淬火回火的工藝研究
  15. Sino - foreign joint venture nanjing dongwu metal material co., ltd. is a hi - tech enterprise which specially produces and sells induction heat oil tempered spring wire and die pusher rod

    中外合資南京東吳金屬製品有限公司是一家專門生產經營感應加熱油淬火-回火彈簧鋼絲冷鐓鋼絲軸承鋼絲異形鋼絲退火磨光定尺線材冷拉鋼絲和模具推桿線材的高新技術企業。
  16. Founded in september 1997, the company occupies an area of 35000 square meters and has 50 staffs, including 3 engineers, 2 vice senior engineers and 4 engineers. with the help of some domestic specialists who engaged in the research on induction heated quenching - tempering treatment in weapon and space industries. we developed the first induction heat oil tempered elastic wire production line in china by ourselves. this production line was put use in august 1998, and was enlisted in the spak programme in 2000 serial number : 369, programme code : 00b101d691004

    創建於1997年9月，佔地35000平方米，員工50名，其中研究員級高工3名，高工2名，工程師4名。依靠國內一批在軍工企業長期從事感應加熱調質處理研究的專家，自行研製成功國內第一條彈性線材感應加熱油淬火-回火生產線，並於1998年投產。
  17. Due to the rapid heating rate, the time for wire stayed in high temperature zone is very short and no enough time for grain grows largely, hence the structure size of continuously induction heated wire is smaller than that of conventional heated wire and grain size is 2 to 4 level higher. due to the fine grain size, the induction heat oil tempered spring wire can acquire more reasonable comprehensive mechanical properties under same strength

    可見，由於加熱快，在高溫停留時間短，組織晶粒來不及長大，因此，連續感應加熱鋼絲的組織晶粒尺寸比一般加熱小，晶粒度高2 - 4級。由於組織晶粒尺寸細小，因此，感應加熱油淬火-回火鋼絲，在同樣強度下，具有更高的綜合b力學性能。
  18. Induction heat oil tempered wire and rod can be directly used in the manufacture of spring and pusher and the quenching - tempering process thereafter can be omitted, thus the quality problems such as deformation of workpiece, decarburization, un - stability and un - qualification of mechanical property can be avoided and the quality stability and reliability of product can be improved

    感應加熱油淬火-回火鋼絲及線材，能直接用於繞簧和製造推桿，可省去一般材料繞簧和推桿加工成形后的淬火-回火工序，避免了由此帶來的工件變形脫碳及力學性能不穩定甚至不合要求等質量問題，提高了產品的質量穩定性和可靠性。
  19. Ansforging and tempering of steel

    鋼的鍛造余熱淬火回火處理
  20. Since the heart of the part treated by the former technology cannot be completely quenched, its mechanical performance will be worse with more energy consumption

    由於該零件經普通淬火回火工藝后心部淬不透，力學性能差，能源消耗大。
分享友人
分享到 Line

分享到臉書