熔液表面 的英文怎麼說

中文拼音 [róngyèbiǎomiàn]
熔液表面 英文
molten surface
  • 熔 : 動詞（熔化） melt; fuse; smelt
  • 液 : 名詞（液體） liquid; fluid; juice
  • 表 : Ⅰ名詞1 （外面;外表） outside; surface; external 2 （中表親戚） the relationship between the child...
  • 面 : Ⅰ名詞1 （頭的前部; 臉） face 2 （物體的表面） surface; top 3 （外露的一層或正面） outside; the ri...
  • 表面 : surface; superficies; boundary; face; rind; sheet; skin; outside; appearance
  1. The result shows that all these system are simple eutectic, at the same time, the entropy of phase change of every system in the eutectic point is determined by using differential scanning calorimetry ( dsc ) on the basis of experimental research, through the improved one - parameter margules equation by introducing a new variable temperature, the improved equation was designed to compute solid - liquid equilibrium

    測定結果表明，這幾組體系均為簡單低共熔體系；同時利用差熱掃描量熱法（ dsc ）對上面各組體系低共熔點處的相變焓進行了測定。在實驗研究的基礎上，通過改進單參數margules方程並引入新的變量溫度，達到了將此方程用於固液平衡計算的目的。
  2. This article choosed out organic phase change materials, and, the solid - liquid - equilibrium of eleven binary system including fatty alcohol / fatty acid, n - octadecane / fatty acid, n - octadecane / fatty alcohol system were determined by cooling curve, and, t - x phase diagrams of these systems were drawn. the result shows that all these systems are simple eutectic, at the same time, the entropy of phase change of every system in the eutectic point is determined by using differential scanning calorimetry ( dsc ). and n - octadecane / fatty acid systems were calculated theoretically

    本文初選出部分有機相變貯能材料，採用步冷曲線法測定了12醇-羧酸系列、 18烷-羧酸系列、 18烷- 12醇體系共11組體系的二元固液相平衡關系，繪制了這11組體系的t - x相圖，測定結果表明，這幾組體系均為簡單低共熔體系；同時利用差熱掃描量熱法（ dsc ）對上面各組體系低共熔點處的相變焓進行了測定；並對18烷-羧酸系列進行了熱力學理論預測。
  3. The effect of compound casting technology and compound modification on the properties of high speed steel roll collar was studied. the results showed that compound high speed steel roll collar with high and even hardness and good bond between outer and inner layers could be gained when the modified colbalt free high speed steel in outer layer and nodular iron inner layer in connection with appropriate rotational speed of centrifugal machine, pertinent pouring interval between two kinds of the melt and moderate pouring temperature as well as surface induction heat treatment were chosen. it is indicated in industrial use that the service life of compound roll collar is higher by 5 times than that of high chromium cast iron collar

    研究了離心復合鑄造工藝和復合變質處理對高速鋼輥環性能的影響，結果表明，選用變質高碳無鈷高速鋼作外層，用球鐵作內層，選擇合適的離心機轉速、兩種金屬熔液澆注間隔時間和澆注溫度，結合採用表面感應熱處理工藝，可獲得硬度高、均勻性好、內外層結合良好的高速鋼復合輥環，用於工業生產其使用壽命比高鉻鑄鐵輥環提高5倍以上。
  4. Water has higher melting point, boiling point, heat of vaporization, heat of fusion and surface tension than comparable hydrides such as hydrogen suiphide or ammonia or most liquids

    與氫硫化物、氨水或其他大多數的液體相比，水具有較高的熔點、沸點、蒸發比熱、熔解熱和表面張力。
  5. The meltable liquid touches with the rotary drum of cooling that form material film in rotary drum appearance. the heat exchange between material film and drum wall makes material film cooling and crystallization. the crystal material film is cut by scraper which forms piece product

    轉鼓結片是一個冷卻結晶過程，料盤中熔融料液與冷卻的轉鼓接觸，在轉鼓表面形成料膜，通過料膜與鼓壁間的換熱，使料膜冷卻結晶，結晶的料膜被刮刀刮下，成為片狀產品。
  6. As well - known, there is an induced current on the surface when metal material is in the high frequency electromagnetic field, since tending to skin heating effect to make the temperature of metal material surface go up promptly, surface beginning melt when temperature reaches the melting point of metal, metal material is heated up continuously by surface to core till the metal droplet of melting

    自懸浮定向流技術制備金屬納米微粒與一般的蒸發冷凝法有所不同，其原理是：金屬材料在高頻電磁場中產生表面感生電流，由於趨膚加熱效應使得金屬材料表面的溫度迅速升高，當溫度達到金屬的熔點時表面開始熔化，通過熱傳導作用金屬材料由表面到芯部不斷加熱直至熔化成金屬液滴。
  7. A hairline fracture in the cola coloured veneer which seperated my cup of tea from the throbbing liquid lava of red disco heaven beneath the surface of the table

    在可樂色薄板上的細裂紋，它從桌子表面之下的脈動的紅色迪斯科天堂的液體熔巖分開了我喜愛的東西。
  8. Oxidation erosion, liquid aluminum erosion and the erosion mechanism of grey cast iron crucible for aluminum melting were described in detail. the methods such as alloying of as - cast surface for improving oxidation resistance of the grey cast iron crucible and both composition adjustment and infiltration protection for improving liquid aluminum erosion resistance of the crucible were introduced. the corrosion resistance and service life of grey cast iron crucible were improved effectively with these methods through decreasing various channels of erosion developing from the surface to the inner of crucible

    詳細論述了熔鋁灰鐵坩堝的氧化腐蝕、鋁液腐蝕及其腐蝕機制，介紹了能夠提高灰鐵坩堝抗高溫氧化能力的鑄態表面合金化法和能夠提高灰鐵坩堝抗鋁液腐蝕能力的調整成分法與浸滲保護法，這些方法通過減少腐蝕由坩堝表面向基體內部發展的各種「通道」 ，有效地改善了灰鐵坩堝抗腐蝕性能，提高了坩堝使用壽命。
  9. Abstract : oxidation erosion, liquid aluminum erosion and the erosion mechanism of grey cast iron crucible for aluminum melting were described in detail. the methods such as alloying of as - cast surface for improving oxidation resistance of the grey cast iron crucible and both composition adjustment and infiltration protection for improving liquid aluminum erosion resistance of the crucible were introduced. the corrosion resistance and service life of grey cast iron crucible were improved effectively with these methods through decreasing various channels of erosion developing from the surface to the inner of crucible

    文摘:詳細論述了熔鋁灰鐵坩堝的氧化腐蝕、鋁液腐蝕及其腐蝕機制，介紹了能夠提高灰鐵坩堝抗高溫氧化能力的鑄態表面合金化法和能夠提高灰鐵坩堝抗鋁液腐蝕能力的調整成分法與浸滲保護法，這些方法通過減少腐蝕由坩堝表面向基體內部發展的各種「通道」 ，有效地改善了灰鐵坩堝抗腐蝕性能，提高了坩堝使用壽命。
  10. Electrospinning origins from that electrically charged fluid is forced jets in the high voltage electrostatic field. electrospinning occurs when the electrical forces at the surface of a polymer solution or melt overcome the surface tension and cause an electrically charged jet to be ejected. when the jet dries or solidified, an electrically charged fiber remains

    電紡絲技術是基於高壓靜電場下導電流體產生高速噴射的原理發展而來，其基本過程是：聚合物溶液或熔體在幾千至幾萬伏的高壓靜電場下克服表面張力而產生帶電噴射流，溶液或熔體射流在噴射過程中乾燥、固化，並保持一定電荷量，最終落在接收裝置上形成纖維氈或其它形狀的纖維結構物。
  11. The result of analysis shows that the convective heat flux has main effect on fuel pyrolyzing and vaporizing, the liquid layer of pe fuel can increase the regression rate but also can cause unstable burning. 4

    研究結果表明：對流熱流是引起燃料熱解氣化的主要因素， pe熔化產生的液體層提高了燃料熱解退移速率，但液體層厚度增加到一定程度時，對發動機工作穩定性有負面影響。
  12. Experimental study on laser cladding valve - plate pair surface of hydraulic pump

    液壓泵缸體配流副表面激光熔覆的實驗研究
  13. Aiming at reducing the roughness of the sidewalls in the manufacturing of the pmma liquid pool by co _ 2 lasers, in the hypothesis that the intensity of the laser has a guassian distribution, the temperature distribution in slab material with limited thickness is studied according to traditional thermal conductive formulas, and the condensing progress of the melted surface of sidewalls is researched. it is concluded from the discussion of temperature distribution that the air bulbs is the major reason for the roughness of the sidewalls

    為降低co _ 2激光加工pmma材料儲液池側壁粗糙度，本文根據傳統的熱傳導方程，假定激光強度為高斯分佈，對有限厚板狀材料的溫度場進行分析;並考察側壁表面熔化層凝固過程的特徵;結果表明，側壁粗糙度形成的主要原因在於側壁表面熔化層凝固前氣泡未及時析出。
  14. Have evolved deep under the oceans at hydrothermal vents, where volcanic fluids rich in reduced chemicals served as an energy source, or in shallow geothermally heated waters on earth s surface, where these chemicals or sunlight could have provided an energy source for

    這類生物可能在深海中的熱液火山口處演化，那裡的熔液含有豐富還原化學物，提供了生長和復制所需的能量又或在地球表面受地溫加熱的淺水處演化，從陽光或水中的化學物中攫取能源。
  15. Combining with the energy fluxes balance above fuel surface, the simulation and calculation of transient heat conduction of the pe fuel with liquid layer while melting and pyrolyzing are considered by use of the moving coordinates. the calculated regression rate of the pe fuel approximately tallies with the same kind of hybrid rocket motor test data from the abroad

    建立了pe燃料的熔化、熱解、導熱模型，應用動坐標系，結合燃料表面熱環境，對具有液體層的pe燃料的熔化、熱解和內部瞬態導熱過程進行了模擬計算，計算的pe燃料退移速率與國外同類試驗的測量結果符合較好。
  16. During the laser sintering, due to the large liquid phase viscosity and surface tension, the balling effect occurred when the molten did not wet the solid metal particle and the underlying substrate

    實驗發現，在液相粘度較高、表面張力大，熔體材料不浸潤固相顆粒和基板等因素的影響下，燒結過程中出現了球化現象。
  17. 4, the formation mechanism of the n - sic particles in the ceramic coating prepared by the nano - micrometer n - sic / al2o3 composite powder located within m - al2o3 grains is revealed : m - al2o3 would be well melted during spraying and form droplet, the n - sic particles existing on the surface of droplet, then the particle enter the droplet when it is impacted and flattened on the substrate

    4 、提出了利用納米一微米n - sic al _ 2o _ 3包覆復合粉末所制的陶瓷塗層中n - sic粒子分佈於m - al _ 2o _ 3晶內的機理：在噴塗過程中微米級al _ 2o _ 3完全熔化形成液滴， n - sic粒子存於液滴表面，在液滴撞擊基材平鋪過程中n - sic粒子進入液滴內部形成。
  18. Natural flake graphite powder used in nonferrous, metal molten furnace for oxygen - proof material

    天然磷片石墨粉，用於有色金屬熔爐液體表面防氧化覆蓋粉。
  19. The result of the xrd, sem and tem analysis show that the densification process was controlled by the mechanical of liquid phase sintering with the addition of mgo and ce02 as the sintering aid. the mgo - ceo2 would react with the sio2 which was on the surface of the silicon nitride particles to from silicate liquid phase to accelerate the densification

    通過xrd 、 sem 、 tem等測試結果表明，由於同時添加了mgo和ceo _ 2作為助燒劑，其緻密化過程為液相燒結，由燒結助劑和si _ 3n _ 4表面的sio _ 2反應形成低熔點的硅酸鹽相，促進燒結緻密化，冷卻后，在晶界形成玻璃體。
分享友人
分享到 Line

分享到臉書