特性弧線 的英文怎麼說

中文拼音 [tèxìnghúxiàn]
特性弧線 英文
arc of characteristic
  • 特 : Ⅰ形容詞（特殊; 超出一般） particular; special; exceptional; unusual Ⅱ副詞1 （特別） especially; v...
  • 性 : Ⅰ名詞1 （性格） nature; character; disposition 2 （性能; 性質） property; quality 3 （性別） sex ...
  • 弧 : 名詞1. [數學] （圓周的任意一段） arc2. （古代指弓） bow
  • 線 : 名詞1 （用絲、棉、金屬等製成的細長的東西） thread; string; wire 2 [數學] （一個點任意移動所構成的...
  • 特性 : characteristic（s）; character; performance; features; properties; behaviour; response; character...
  • 弧線 : arc弧線運動 movement in a curve
  1. The paper studies the surface geometry of globoidal indexing cam by applying the theory of conjugate surfaces and the method of coordinate transformation, presents the equations related to the main inducement curvature of the cam profiles, analysis and deduces the equations of two circumscription curves, which judge if the conjugate surface could mesh properly. some calculate examples and conclusion are given. the surface equation of the globoidal cam and conjugate equation are established

    論文首先在分析空間嚙合原理基礎上，採用坐標變換法推導出弧面分度凸輪的工作廓面方程、嚙合方程和壓力角計算公式，對弧面分度凸輪的嚙合特性進行了深入的分析和研究，對判斷曲面能否正確嚙合的依據如兩類界限線方程以及誘導主曲率等進行推導，並給出算例。
  2. 4. the feature of linearity and ring structures shows that three structural lenses that are formed by the junction of four level i faults in alignment are helpful to the formation of ore - body. in longshujiao and longtouzhai lenes there are many intersectant east - north and west - north low level faults, so they are concentration place of ore - bodys

    4 、從遙感線環構造特徵上看，區內的四條主要東西向線性構造，是級控巖控礦線性構造，它們在走向上弧形交接形成三個構造透鏡體，是成礦的有利部位。
  3. The aerodynamic characteristics of a projectile with wrap around fins are studied systematically in this paper, as follows : 1. the lift coefficients 、 drag force coefficients 、 pitch moment coefficients 、 pitch damping moment derivatives and roll damping moment derivatives are obtained from engineering calculation through looking wrap around fins as flat fins of the same projection aera

    本文對某卷弧尾翼彈氣動特性進行了系統研究，主要內容與結論為: 1 .將卷弧翼按照相同投影面積的平板翼進行工程估算，得到升力系數、阻力系數、俯仰力矩系數、俯仰阻尼導數、滾轉阻尼導數曲線。
  4. This paper puts out the edge shapes curvilinear equations, of the edge shapes of double circular gear hob, and analyzes the tooth surfaces characterist. it also points out that the gear hob is a kind of approximate shape building cutting too ls in the whole course of using

    本文提出了直槽雙圓弧齒輪滾刀刃形曲線方程式，並進一步分析了該滾刀的齒面特性，指出該滾刀從整個使用過程看，是一種近似造型的刀具。
  5. Abstract : this paper puts out the edge shapes curvilinear equations, of the edge shapes of double circular gear hob, and analyzes the tooth surface ' s characterist. it also points out that the gear hob is a kind of approximate shape building cutting too ls in the whole course of using

    文摘:本文提出了直槽雙圓弧齒輪滾刀刃形曲線方程式，並進一步分析了該滾刀的齒面特性，指出該滾刀從整個使用過程看，是一種近似造型的刀具。
  6. According to eigenvalue equation ( general formula ) of the energy method of the plane steel frame structure stability, and considering the restriction of the end of the column of the main steel frame and function of deflection curve gained from the differential balance equation general resolution, we get the equation for calculating the length coefficient of the main frame structure stability of the steel arch gate and the resolutions are also given

    根據平面剛架穩定性能量法特徵值方程（通式） ，考慮弧形鋼閘門主框架柱的柱端約束的特殊情況，求出撓曲線函數（試解函數）通解，得到弧形鋼閘門主框架柱穩定性計算長度系數方程。其中弧門主框架主橫梁式形框架的臨界荷載比較現行規范推薦的有限元法簡單方便、結果精確及物理概念明確等優點。
  7. The problem about neutral - point - grounding mode is an all - around technical problem which associated with not only power system reliability ， insulation coordination ， electromagnetic interference ， but assault safety 。 in china ， the neutral grounding modes of the 10kv net involved of none grounding, grounding by arc suppressing coils, resistance grounding or reactance grounding in the past 。 with the development of civic power network ， low resistance grounding mode was used to restrain the over voltage, particularly in guangzhou, shanghai ， beijing ， and zhuhai etc. it was reported that the over - voltage level of low resistance grounding mode is lower than that of arc suppressing coil mode, but the operation carried out the other way 。 at substations in guangzhou and shanghai it was found that the low resistance grounding mode is successful 。 but in some areas ， such as zhuhai ， substations grounding with low resistance revealed some problems ， including power supply reliability rapidly dropping ， transmitting line often tripping ； and person safety being threatened 。 so interiorly the grounding mode selection of the 10kv network was disputed, which mainly focused on the fault form of 10kv net grounding, the apply area of suppressing arcing coil grounding mode, power supply reliability level of the two modes, person safety, communication interfere and the workload of maintenance

    爭議點主要是在10kv電網接地故障的形式、消弧線圈接地的應用范圍、兩種運行方式供電可靠性的高低、人身安全、通訊干擾和運行維護工作量等諸多方面。 11 17本論文就是針對以電纜為主的城區10kv電網中性點接地方式的選擇問題進行研究。論文首先對10kv電網的中性點運行各種方式進行分析，比較各方式的特點，然後以重慶儲奇門變電站10kv電網的實際參數來建立數值計算模型，在考慮了電網接地電容電流變化、中性點電阻取值大小、接地點接地電阻值變化等多種影響因素的情況下，對中性點經消弧線圈接地和經小電阻接地方式下電網的過電壓水平和接地點短路電流大小進行了數值計算，其計算結果與電科院所作現場試驗進行了比較。
  8. The variable polarity power supply circuit uses two stages full - bridge inverter, the former inverter is regarded as a constant - current source with fast dynamic response, and supplys energy for the second one, and the latter one is to produce variable polarity current excellently, and low - frequency pulse current by variable polarity power supply is used to reduce input energy and control the shape of weld bead while welding. a series of high - frequency pulse current is superposed on direct - current - electrode - negative ( dcen ) current through the high - frequency pulse power supply, which is used to compress the arc and improve process of crystallization

    其中變極性電源採用二次全橋逆變結構，一次逆變提供快速的響應速率並給二次逆變提供能量，二次逆變提供良好的變極性性能，使輸出能量最優化，並用其低頻電流特性減小電弧線能量，控制焊縫成形;高頻脈沖電源提供的高頻電流疊加在反極性電流dcen上，利用電流的高頻特性壓縮電弧，改善焊縫金屬結晶過程。
  9. The principle of the predigestion in geometry modeling is omitting the function part and the non - load - carrying process structure, and to the big and transition arc, the curve is replaced by straight line using the thought of curve and free - surface segmentation. the physical characteristic of the digital model reflect on remaining the main mechanical characteristic of the objects. the shell element model is used in strength analysis, stiffness analysis and dynamic analysis

    文中幾何建模的簡化原則是，略去功能件和非承載的工藝結構，對于大圓弧和過渡圓弧，以曲面分塊和曲線分段的思想進行適當的以直代曲;數模的物理特性反映在最大限度地保留對象的主要力學特性;在強度、剛度和動態分析中採用殼元模型，輕量化設計中採用梁元模型;材料特性根據所用材料定義其主要性能參數。
  10. Chapter one of the thesis introduces the vacuum structure, operation principle and electric arc characteristic of the vacuum killing arc room concisely, and retrospected the development of the vacuum killing arc room briefly, and indicated the research purpose and meaning of thesis at the same time. chapter two introduces the design process and manufacturing technology of the vacuum killing arc room possessing cup form horizontal magnetism touch head structure. electric magnetic field finite element, an analytical soft of ansoft company, and msc non - linear finite element, an analytical soft of marc of company, have been adopted to analyze the distribution state of the horizontal magnetic field between the touch heads, electric field intensity distribute state and temperature rise situation which the touch head produced

    論文的第一章首先是對真空滅弧室的結構、工作原理和電弧特性進行了簡明的闡述，同時對真空滅弧室的發展做了一個簡要的回顧，並表明了本論文的研究目的和意義;第二章介紹了杯狀橫磁真空滅弧室的設計過程和製造工藝;採用ansoft公司電磁場有限元分析軟體和msc公司marc非線性有限元分析軟體分析了觸頭結構產生的橫向磁場在觸頭間的分佈狀況、電場強度分佈狀況以及溫升情況。
  11. The thesis analyses some kinds of representative grounding devices with automatic resonance petersen coil and points out their characteristics and applicability separately

    =本文分析了國內外具有代表性的幾種自動調諧消弧線圈接地裝置，分別指出了它們的特點和適用條件。
  12. For ac electric arc furnace is an unbalanced, nonlinear and time variant load that produces unbalance, harmonics and interharmonics related with flicker effect. the modeling of all these aspects requires adopting a nonlinear, asymmetrical and dynamic v - i characteristic for the electric arc

    由於交流電弧爐是一種不平衡的、非線性時變負載，它產生與電壓閃變有關的不平衡、諧波和分數諧波，所有這些就需要一種非線性、不對稱的動態u ? i特性的電弧爐模型。
  13. At first, this paper summarized the developing and the present state of peterson coil automatic compensation system, and introduces the basic theory of it

    本文首先綜合比較了各種中性點接地方式的特點，介紹了消弧線圈的基本構成以及調諧原理。
  14. According to the present actual underground power system which neutral point is grounded through arc suppression coil in many supper big shaft, the development history and present situation of synthetic protection system used in hv flameproof switchgear are reviewed, and on the basis of analyzing the problems existed in high voltage flameproof switchgear, the selective leakage protective method based on the detecting harmonic direction of zero sequence current as well as the value of zero sequence voltage is proposed in this paper, and at the same time, harmonics extracting schematic and transforming circuit are also designed

    本文深入系統地研究了基於intel80c196kb單片機控制的6kv防爆開關綜合保護系統，主要內容如下：針對大型及特大型礦井供電系統中性點普遍採用消弧線圈接地方式的現狀，回顧了國內外礦用高壓防爆開關保護系統的發展歷史，分析了目前國內高壓饋電開關保護系統所存在的問題，提出了「基於零序電壓基波啟動，五次諧波功率方向比較」的選擇性漏電保護原理，設計了相應的五次諧波提取電路和功率方向鑒別電路。
  15. The methods that represent geometry elements such as line, circle and arc, plan, cylinder, cone and sphere in nurbs form are studied. meanwhile, the calculating process that interpose to nurbs curve and surface are advanced. to the processed surface, the paper brings forward a method to distill its character ( plan, cylinder and sphere ) by the main curvature of surface using its local differential coefficient geometry characteristic

    對nurbs的直線、圓和圓弧、平面、柱面和球面等的表示方法作了理論研究，同時對nurbs曲線曲面的進行插值的計算，插值后的nurbs曲面，利用其表面局部微分幾何特性，提出依據曲面的主曲率來提取特徵面（平面、柱面和球面）的方法。
  16. In recent years, current rectifiers, frequency converters, arc furnaces and other power electronic devices etc have been increasingly used in power network. with nonlinear, impactive, unbalanced characteristics, they generate lots of harmonics and cause distortion in power network current or voltage

    近年來，配電網中整流器、變頻裝置、電弧爐以及其它電力電子設備等的應用不斷增加，由於這些負荷具有非線性、沖擊性和不平衡的用電特性，引起供電網中的電流（電壓）畸變，產生大量諧波。
  17. As technique of power electronics develops, the load with nonlinear, impactive, unbalanced characteristics such as current rectifiers, frequency converters, arc furnaces have been increasingly used in power network in recent years. they generate lots of harmonics and cause distortion in power electrical network current ( voltage )

    隨著電力電子技術的發展，近年來電網中象整流器、變頻器、電弧爐這樣具有非線性、沖擊性和不平衡用電特性的負荷不斷增加，引起供電網中的電流（電壓）畸變，產生大量諧波。
  18. Adopting the conceptions of thin - walled member theory, studies on linear elastic analysis and ultimate strength behaviors of curved i - beams are presented in this paper, which may give helps to a deeper understanding of the behavior of curved beams and provide a reasonable design guideline

    本文依據薄壁構件理論，通過對工字形截面圓弧曲梁的線性分析、穩定理論和極限承載力等問題的研究，旨在進一步了解這類構件的工作特性，並為工程設計提供一定幫助。
  19. Analysis of axial magnetic field characteristics of coil type axial magnetic field vacuum interrupters

    線圈式縱向磁場真空滅弧室磁場特性
  20. Adopting the short circuit electric current of to formate the test prove that this contact turn on and cut off performance. according to ablation situation of contact surface after testing, have analysed that coil type double - pole amf influences electric arc

    採用短路電流合成試驗驗證了這種觸頭的開斷性能，根據實驗后觸頭表面的燒蝕情況，分析了線圈式兩極縱向磁場在大電流時對電弧特性的影響。
分享友人
分享到 Line

分享到臉書