結點選擇 的英文怎麼說

中文拼音 [jiēdiǎnxuǎnzhái]
結點選擇 英文
nodal selection
  • 結 : 結動詞（長出果實或種子） bear （fruit）; form （seed）
  • 點 : Ⅰ名詞1 （液體的小滴） drop （of liquid） 2 （細小的痕跡） spot; dot; speck 3 （漢字的筆畫「、」）...
  • 選 : Ⅰ動詞1. （挑選） select; choose; pick 2. （選舉） elect Ⅱ名詞（挑選出來編在一起的作品） selections; anthology
  • 擇 : 擇動詞（挑選） select; pick; choose
  • 選擇 : select; choose; opt; election; choice; culling; alternative
  1. Methods the improvements of the operation included ; a supertemporal conjunctival flap 180 with its base at the fornix, the puncture points were located at 8 and 2 o ' clock ( right eye ) or 10 and 4 o ' clock ( left eye ), the straight needle and shovel needle with prolene suture were conducted into the eye via two different side of corneal incision and out of the eye under the scleral flap at 8 and 2 o ' clock ( right eye )

    方法術式改進包括：顳上方180 、以穹隆為基底的大結膜瓣；穿刺點選擇8點及2點位（右眼）或10及4點位（左眼） ；用聚丙烯縫線所帶直針及鏟針，從角膜切口兩端進入眼內，由8點及2點位鞏膜瓣下穿刺出針。
  2. This dissertation focuses on the issue of the present farming organization structure in china. the research framework is that, while constructing some fundamental frame of theory for the research of farming organization structure, the study explores the theoretical basis behind the present farming organization structure in china ; while probing into general factors hindering the changing of the organization structure, the study tries to find out the deep - seated reasons which made the current farming organization structure incommensurate to the situations nowadays ; while studying the changing trend of farming organization structure in modern agriculture, the study suggests a basic orientation for the farming organization structure in this country ; while historically analyzing the developing process of the farming organization structure since 1949 in china, the study strives to find out its changing track ; then, while concretely analyzing the status quo, characteristic and adaptability of the current farming organization structure in china, the study explores its existing problems and their impacts on the agricultural development ; finally on the bases of the analyses above, the study brings forward an innovative ideas, some patterns and countermeasures for the current farming organization structure in china

    研究的總體思路是：通過農業生產組織結構基本理論框架的闡釋，提出中國農業生產組織結構問題研究的理論依據；通過對生產組織結構變遷的一般影響因素的探討，分析我國現階段農業生產組織結構不合理的深層次原因；通過對現代農業中生產組織結構選擇趨勢的研究，指出現階段中國農業生產組織結構模式選擇的基本方向；通過對1949年以來我國農業生產組織結構變遷的過程進行歷史分析，找出我國農業生產組織結構變遷的歷史軌跡，以總結經驗、吸取教訓，使現階段農業生產組織結構創新少走彎路；在理論分析和歷史分析之後，具體剖析了中國農業生產組織結構的現狀、特點以及對農業發展的適應性問題，揭示現階段我國農業生產組織結構中存在的問題以及生產組織結構不合理對農業發展的影響；在上述鋪墊的基礎上，提出現階段中國農業生產組織結構創新的思路、模式以及對策，以期對解決我國農業生產組織結構中存在的問題有所助益。
  3. At the same time, this article chooses the network framework of its system by analyzing several basic kinds of network system structure. it utilizes network data base programming principle to discuss the visit technology of data base odbc, web data base middle pieces technology cgi, and characteristic of the calculate mode of asp c / s b / s, proposes the topological structure of network data base used in this system

    同時分析了幾種基本的網路體系結構，選擇了系統的網路構架，利用網路數據庫編程原理，討論了數據庫的訪問技術odbc 、 web數據庫中間件技術cgi和asp 、 c s及b s計算模式的特點，提出系統中應用的網路數據庫拓撲結構。
  4. Secondly, the steps of the glass ' s image processing are discussed in detail. based on the experiments and the characteristics of interference fringe, we pre - process the images with median filter and image segmentation with dynamic threshold. after marking and thinning the resulted fringes, we analyze linearly the unifor mity of product ' s samples with the characteristics of the framework

    然後，結合檢測系統中玻璃干涉圖像處理的任務，詳細介紹了處理的各個步驟：通過實驗比較，並結合干涉條紋圖像的特點，選擇中值濾波、動態閾值分割等技術對圖像進行預處理；然後對獲得的二值條紋進行標記、細化，提取條紋骨架；最後，用骨架的特徵進行線性分析，識別條紋的類型，判斷玻璃樣品的均勻性。
  5. After review these models we choose the economic growth accounting model proposed by barro ( 1999 ) to study the economic development problems, green economic accounting proposed by cairns ( 2000 ) and asheim ( 2000 ) to study environmental pollution and nature resource depletion problems, and computable general equilibrium storm model ( 1997 ) to study the equilibrium problems, combine them and then modify to produce new model

    第4章的內容是本文的一個重點。首先我們經濟核算模型和綠色gdp核算模型進行了分析。在模型分析的上，我們選擇了barro （ 1999 ）提出的經濟增長核算模型作為研究經濟發展的經濟模型，結合選擇了cairns （ 2000 ）和asheim （ 2000 ）模型作為綠色gdp核算的基礎模型。
  6. The integrated dci could completely indicate the outdoor climate characteristics and can be used to choice the different passive design strategies. taking advantage of the author proposed bbdc and the updated weather data for 18 cities that have both typical climate characteristics and economic geography meanings, analyzes roundly each city ' s climate and proposes appropriate passive design strategies. suggests rules of passive design guidelines, which include solar heating, natural ventilation, nocturnal ventilation and evaporative cooling system and shade

    西安建築科技大學博士學位論文利用作者建立的氣候分析圖和氣象數據統計結果，選擇我國自然劃明裡區域內有人黃昏氣候特徵和重要經濟地理位置的城市（共18個） ，在分析各城市氣候特點的基礎上，提出了以創造室內熱舒適為目的建築氣候設計指導原則和適宜的被動式設計技術措施，主要包括太陽g里同援、夏季自然通風和建築蓄熱降溫、蒸發冷卻和遮陽。
  7. Firstly discussing basic type of computer redundant structure and characteristic of the systems, the self - monitoring dual redundancy computer systems is brought forward as the design scheme for the required flight control computer system. the redundant structure is researched about reliability by using markor model and is carefully designed

    首先分析了計算機冗餘結構的基本類型以及本次設計的要求特點，選擇了自監控二冗餘飛行控制計算機系統的設計方案，運用馬爾科夫模型對此冗餘系統的可靠性進行了計算研究，並且對此冗餘結構進行了詳細地描述及設計。
  8. This paper mainly aims at the strategic demands for large - aperture lightweight mirror proposed by high - tech development. its main research contents are : select material blank for lightweight mirror according to physical and chemical properties of optical glass ; analyze and calculate the deformation quantity of the mirror with finite element method ; design and optimize mirror body structure of 400 lightweight plane mirror and 450 lightweight spherical mirror, analyze glass cutting principle, design specisl - use grinding wheel structure, select reasonable technological parameters to implement the processing of weight reduction holes on 400 plane mirror ; analyze etching mechanism of hydrofluoric acid, look for the technological parameters such as the optimal acid concentration and etching time etc. ; eliminate the stress of weight reduction holes and micro - cracks on 400 lightweight plane mirror ; discuss the processing principle and

    本論文的研究主要是瞄準國家高技術對大口徑輕型鏡的戰略需求而開展的。主要研究內容是：根據光學玻璃的物理與化學性能，選擇輕型鏡坯材料；用有限元法對鏡子的變形進行分析、計算，找出變形規律，優化設計400mm輕型平面鏡、 450mm輕型球面鏡鏡體結構；分析玻璃切削原理，設計專用磨輪結構，選擇合理工藝技術參數，完成400mm平面鏡輕量化減重孔的加工；分析氫氟酸腐蝕光學玻璃機理，尋找最佳酸濃度、腐蝕作用時間等工藝參數，實現400mm平面鏡減重孔應力與微裂紋的消除；討論分離器加工原理和工藝技術特點，完成400mm平面輕型鏡面形加工。
  9. According to work situation, we select double crawler movement and permanent magnetic adsorption for the robot

    根據工作的環境與特點選擇了雙履帶、永磁鐵吸附方式的總體結構。
  10. Combining the character of heiyingshan ' s lean iron ore and the experiences of hematite dressing home and abroad and locale character that located in the center of gobi desert and lacking electricity and fresh water, we have finished three ways of trial studying which are the magnetic ore dressing, lump dry - magnetic dressing and magnetic - gravity ore dressing

    根據黑鷹山礦貧鐵礦石性質和國內外紅鐵礦選礦實踐，結合黑鷹山礦現場地處戈壁沙漠、缺電少水特點，選擇全磁選方案、塊礦干選-磁選方案及磁選-重選方案進行選礦試驗研究，針對選礦試驗情況對中磁?強磁（一粗一精）選礦流程進行了擴大試驗。
  11. The influence of expressway economic lane to highway network layout is concluded. ( 3 ) several principles of highway network topology are proposed according as the rule of local highway network and town space layout, which are : the local city space layout, town node selection sequence and route selection, form and object and principle being considered together

    （ 3 ）在區域公路網形態與區域城鎮空間結構的演變規律的研究成果基礎上，提出了以區域城鎮空間結構大背景分析為依據，城鎮節點選擇排序和路線選擇為核心，形式、目標、原則相統一的分層次漸進公路網形態布局方法。
  12. The integral structure of system are analyzed, and a scheme based on dsps processing board + mcu control board are put forward firstly, following design difficulties and relevant measures. every modules of dsps board are described in details, including chips selection, implementation manners choice, interface and time sequence match and etc. compared otsu single threshold segmentation with multi - threshold segmentations, the latter are preferred to perform the object identification in hardware designed by author. combined to like background rejection, morphology expansion and etc. steps, the paper gets the length of queue ; finally, a - b united control and area united control based on can bus are designed

    首先分析了系統的總體結構，提出了一種基於dsps處理板+單片機控制板的信號機實現方案；在此基礎上，重點介紹了處理板模塊化的硬體電路設計，其中考慮了晶元的選型、實現方式的選擇、工作機制、時序匹配等問題；之後，分析了otsu單閾值目標識別和多閾值目標識別的效果，重點選擇後者在硬體電路板內對圖像進行了目標識別的演算法處理，結合背景的剔除、形態學膨脹等幾個減小誤差的措施，對車輛排隊長度進行了較為精確的提取；最後在控制板上完成了干線a - b信號聯動控制和基於can總線的區域聯網控制的通訊方案設計。
  13. The theoretic analysis and computer simulation results reveal that this influence ca n ' t be ignored. because the if sampling and digital demodulation technique can improve amplitude and phase unbalances of in - phase and quadrature channels, we apply it in the pd weather radar signal processing system and select several digital demodulation algorithms, which are easier to implement, for this system

    由於採用中頻采樣和數字解調技術能有效地提高正交解調兩路的幅相一致性，本文將中頻采樣及數字解調技術應用到脈沖多普勒氣象雷達信號處理系統中，並結合氣象信號的特點選擇了適合工程實現的中頻采樣及數字解調演算法。
  14. After comparing the mode of the combination of finance and industry of the united states and japan in period of heavy industry and high - tech separately, the paper draws the conclusion that only if the mode of the combination of finance and industry is adapted with the financial demand of the leading industry, it can facilitate the development of leading industry and the transformation of industry structure

    進而通過構建產業需求與金融供給相互適應的比較分析的理論框架，重點選擇重化工業和新經濟兩個斷面對典型國家? ?美國、日本的產融結合模式進行比較分析，旨在說明建立在一國特定製度基礎上的產融結合模式只有與主導產業發展的需求相適應，才能促進主導產業的發展，進而促進產業結構的調整。
  15. Firstly, considering the molecular pump is small and the elimination of heat condition is bad, this paper presents the structure of the mb, including the material of the rotor and stator, the number of magnetic poles, the stator slot shape of mb, the layout of the magnetic poles, the coins winding and so on

    首先綜合考慮了分子泵體積小、磁軸承散熱條件不好的特點，設計了分子泵磁懸浮軸承的結構，選擇了軸承鐵芯的材料，設計了磁極的布置、槽的形狀、磁極數目和線圈纏繞方式。
  16. Establishing 3 - d terrain models with vector contour lines and elevation terrain models with the help of the determination of space corresponding relations between contour lines, tile operation and branch operation. explanation of real - time reflection of terrain models, including three algorithms in lod technology, compared with quadtree algorithm, roam algorithm and the algorithm based on the intermediate belt, to show the advantages and disadvantages of the different situations of the terrains, so as to find out the right algorithm, the quadtree algorithm. developing and implementing the fast demonstration on the vc platform with three - dimentional visualization techniques, such as vrml and opengl, providing a persuasive argument for the research

    論文首先概括介紹了用等高線快速建立3d地面模型和顯示的相關技術，並論述了課題研究的背景和選題依據;其次，論文闡述了如何對等高線數據進行預處理，提出了有效的得到矢量化等高線的方法;再次用矢量化的等高線數據建立三維地面模型，通過等高線間的對應關系的確定、瓦片操作、分支操作建立地面的高程模型;然後論文對地面模型的實時渲染問題進行了深入闡述，主要是從lod技術的三種演算法著手進行研究，通過對比四叉樹演算法、 roam演算法和基於過渡帶演算法對不同種情況的地面數據顯示的優缺點，再結合本系統的地形數據的特點選擇了適合的演算法:四叉樹演算法;最後，用vrml和基於opengl的三維可視化技術在vc平臺上開發並實現了地形的三維快速顯示系統，為論文的研究內容提供了有力的論證。
  17. Acoording to company valuation theory, based on ananlysis and comparison of present company valuation model and valuation technology, combining characteristics of biopharmacy company of high technology, high risk, high profits, i take sichuan dikang science and technology pharmacy, a biomedical listing company for dcfm model value ' s valuation. through analysing dikang ' s past achievements and value - driving business, i made

    本文根據公司價值的有關理論，對目前運用的公司價值評估模型和評估技術的進行分析和比較基礎上，結合生物制藥上市公司高技術、高風險、高收益等高新技術企業特點，選擇貼現現金流模型對物制藥上市公司? ?四川迪康科技藥業股份有限公司的價值進行評估。
  18. 2. although calculating magnetic - flux leak coefficient and magnetic - reluctance coefficient is too complex to be done, combining magnetic force pump alnico ' s characters, appropriate accounting models are selected to calculate these coefficients through magnet conductivity methodology, the equation has been induced

    雖然漏磁系數和磁阻系數的計算非常復雜，利用磁導法，結合磁力泵磁鋼排布特點，選擇適合磁力聯軸器特點的計算模型，給出了漏磁系數的計算公式。
  19. In order to validate the feasibility of fuzzy pattern recognition applied to the stress field instantaneous recognition and the accuracy of data - collection system, we design the bracket model and did a model experiment to prove the accuracy of data - collection system and the feasibility of fuzzy pattern recognition theory using data - collection system, then, we discuss the influencing factor in the selection of key point

    同時，為驗證模糊模式識別方法用於支撐鋼牛腿瞬時應力場識別的有效性可行性，及工程現場採用的數據採集設備的準確性，本文中設計出模型牛腿，並進行了模型實驗，並對實驗結果進行了系統地研究及分析。同時進行了牛腿上關鍵點選擇的參數分析的討論。
  20. In complicated cases of intellectual property right ( i. e. cases involving two or more than two places of tort ), choosing applicable law by traditional connecting factor is not enough, then the flexible methods such as the rule of autonomy of will and the theory of proximate connection must be used

    但在復雜的知識產權案件（即一個侵權行為產生幾個侵權行為地）中，僅僅依靠傳統的連結點選擇準據法是不夠的，而應根據最密切聯系原則、意思自治原則等靈活的法律選擇方法選擇法律。
分享友人
分享到 Line

分享到臉書