脈寬調制 的英文怎麼說

中文拼音 [màikuāndiàozhì]
脈寬調制 英文
impulse-width modulation
  • 脈 : 脈名詞1. （動脈和靜脈的統稱） arteries and veins2. （脈搏的簡稱） pulse 3. （像血管的組織; 連貫成系統的東西） vein
  • 調 : Ⅰ動詞1 （配合得均勻合適） harmonize; suit well; fit in perfectly 2 （使配合得均勻合適） mix; adju...
  • 制 : Ⅰ動詞1 （製造） make; manufacture 2 （擬訂; 規定） draw up; establish 3 （用強力約束; 限定; 管束...
  1. Digital pwm techniques for sine inverter power

    正弦逆變電源的數字脈寬調制技術
  2. This thesis introduces the base theory and correlative information of variable frequency speed variation, and expatiates sinusoidal pulse width modulation ( spwm ). the principle of svpwm is in - depth discussed, and a simple algorithm for svpwm is ratiocinated

    本文介紹了交流變頻調速的發展概況，分析了其基本原理，闡述了正弦脈寬調制（ spwm ）原理，對svpwm理論進行了研究，給出了svpwm的簡單實現演算法。
  3. This paper starts the research of the liquid floated pendulous accelerometer testing system according to the engineering. at first, this paper gives the brief introduction of the history and present status of accelerometer and its testing technology, the working principium and math model of the liquid floated pendu - lous accelerometer, and then, decides the binary width pulse force retrim loop as the design proposal of testing system, researches the transfer function of every part in the system emphasizly, analyses the stability of the whole accelerometer testing system from the angle of control theoretics by the open loop transfer function of system, and designed the correcting net, analyses the basal problems such as resolution, sampling restraint, precision and so on, designs the hardware testing circuits such as preamplification, band - pass filter, alternating amplifier, phase sensitive demodulatorn, pulse - width modulation, frequency scale circuit, moment current generator. finally, using the graphics program language labv - iew which is designed for testing field especially by ni accomplishes the solfware design of testing system, realized the testing functions

    首先對加速度計及其測試技術的發展歷史和現狀，液浮擺式加速度計的工作原理和數學模型等作了簡要的介紹，然後確定了以二元調寬脈沖再平衡測試迴路為設計方案，並從控制理論的角度進行了分析，著重研究了系統中各部分的傳遞函數，利用系統開環傳遞函數分析了系統的穩定性，同時設計了系統的校正網路;分析了二元調寬脈沖再平衡測試迴路的解析度、采樣約束以及測試精度等基本問題，並按照系統分析的結果設計了包括前置放大、帶通濾波、交流放大、相敏解調、脈寬調制、頻標電路以及力矩電流發生器等測試系統各部分硬體電路，驗證了電路的正確性，最後按照測試系統的要求，採用了美國ni公司專為測試領域所開發的虛擬儀器工具? ? labview作為測試軟體開發工具，利用該圖形化編程語言完成了測試系統軟體部分的設計，實現了測試功能。
  4. A novel pwm dc converter with snubber cell

    一種新的帶有緩沖單元的脈寬調制式直流變頻電路
  5. In chapter three, the all sub - circuits including uvlo, current bias, ldo, oscillator, green mode, slop compensation, power limiting, pwm, ovp, blanking time generator, logic controller are designed and simulated. as a result, all of the sub - circuits are satisfied the requirements

    本文第三章對集成電路內各個模塊包括欠壓保護、電流偏置、 ldo 、振蕩器、綠色模式、斜坡補償、功率限制、脈寬調制、過壓保護、前沿消隱、邏輯控制電路等進行了設計與模擬，且達到了預定的設計目標。
  6. The subject inducts digital time division technology ( pwm ), which is more advantageous at the accuracy and the predigest of hardware than simulant multiplication. what they call measuring power energy reasonably is that measuting except harmonics power energy fed back power. yet it realizes reasonable measurement of power energy which measures by base wave ac parameters method base on digital time division

    本課題引入了數字時分割（ pwm ）脈寬調制技術，在測量的準確性、硬體電路的簡化等方面都比模擬乘法器具有較高的優越性。所謂合理的計量電能，就是不計非線性負載回饋給電網的負的諧波電能，而採用基於數字時分割的基波交流參數測量的方法，真正實現了電能的合理計量。
  7. At the aspect of hardware design, it adopts pulse distributor and the technology of single polar voltage drive to accomplish the function of controlling and driving stepmotor ; it adopts the technology of pulse width modulation and cmos h - bridge drive to accomplish the function of controlling and driving dc servomotor ; it adopts d / a convertor to accomplish the function of controlling ac transducer ; it adopts the technology of digital phase detection to accomplish the function of detecting the feedback position signal of induction phase shifter ; it adopts dsp ’ s capture cell to accomplish the function of detecting the feedback position signal of photoelectric coder

    硬體方面，採用脈沖分配器和單極性電壓驅動技術實現了步進電機的控制和驅動功能;採用脈寬調制技術和cmos互補h橋驅動技術實現了直流伺服電機的控制和驅動功能;採用d / a轉換器實現了交流變頻器的控制功能;採用數字化相位檢測技術實現了感應移相器位置反饋信號的檢測功能;採用dsp的捕獲單元實現了光電編碼器位置反饋信號的檢測功能。
  8. During the circuit design, the author analyzed the basic principle of the direct current motor, pwm control, h - bridge power driver, and two control techniques of h - bridge power drive circuit, designed its general structure, so the feasibility of the design is confirmed. then, reference, oscillator, power dmos gate drive circuit ( charge pump, bootstrap ), and dead time generation circuit are designed and analyzed in the sub - circuits. a current - controlled oscillator is presented in this thesis

    在電路設計中，作者介紹了直流電機的工作原理和數學模型、脈寬調制（ pwm ）控制原理、 h橋電路基本原理和h橋功率驅動電路的兩種控制模式，設計了驅動電路的總體結構，給出了電路的功能模塊，確定了設計的可行性，然後在子電路模塊中，重點分析設計了基準源電路、振蕩器電路、高端功率管柵驅動電路（電荷泵及自舉電路） 、低端功率管柵驅動電路和死區時間產生電路。
  9. Study of svpwm technique of three - phasevoltage source pwm rectifier

    整流器空間矢量脈寬調制研究
  10. This product, adopted pwm integrated circuit and mosfet, igbt that were imported from the overseas, has the following merits : quick - response, strong interfere - proof, stable frequency and voltage, low consumption when light loading, high efficiency and reliable performance, it can be applicable to the family use, pasture region, work with the wind generator and some other places where the power failure often occurs

    本品採用pwm （脈寬調制）集成電路和進口大功率mosfet 、 igbt等器件，具有應變快、抗干擾、自動穩定頻率和電壓、空載損耗低、效率高、性能可靠，是家庭，牧區，風力發電機配套以及其它野外經常停電地區提供交流電的必備的電器。
  11. There are five parts are as follows : in part one, the concept of switching function is introduced first to establish the nonlinear mathematical model of the induction motor variable frequency speed adjustment system which is fed by a sine pulse width modulated ( spwm ) inverter and takes the effect of the main magnetic circuit saturation into consideration, then the low frequency oscillation of the system is simulated according to the model. next, from the view point of energy conversion of the inverter - induction system, a criterion for the low frequency oscillation is proposed to determine whether the system is in low frequency oscillation which is judged by whether the interval of the negative current component of the inverter input current is more than 1 / fc ( fc is the carrier wave frequency of the inverter ) or not

    首先引入開關函數概念，建立了正弦脈寬調制（ spwm ）逆變器供電異步電動機，考慮主磁路飽和時的變頻調速系統整體數學模型，模擬系統的低頻振蕩；其次從逆變器-異步電動機系統能量轉換角度出發，提出通過檢測逆變器輸入電流中負電流的間隔時間是否大於1 / f _ c （ f _ c為逆變器載波頻率）來判定系統是否出現低頻振蕩；最後的實驗結果驗證了系統低頻振蕩建模和判據的實用性和正確性。
  12. And with the pulse width modulation method, linearized the electrostatic force producer. it deeply analyzed the speciality of the electrostatic force closed - loop plan, and worked out the system parameters from automatic control theory and simulation

    深入分析了靜電式脈寬調制閉環方案的系統特性，結合自控原理理論和模擬分析對靜電式脈寬調制閉環系統參數進行設計計算。
  13. A novel current control mode pulse width modulation switched high frequency resonant arc igniting device is developed based on uc3842 and the principle is analyzed

    摘要採用uc3842設計了電流控制型脈寬調制開關式高頻振蕩引弧器，並對其工作原理進行了分析。
  14. Full - bridge pwm motor drive a3952 is introduced in this paper, and an example is given for single phase dc brushless torque motor control

    摘要介紹了一種全橋脈寬調制晶元a3952的特點和功能及其在單相無刷直流力矩電機控制中的應用。
  15. In order to describe the actual working processes of dielectric barrier discharge ( dbd ) circuit, an analysis model of differential - difference equations was presented, based on the working modes of full bridge serial load resonant dbd circuit, which was adopted with phase shifting control

    摘要為描述介質阻擋放電型臭氧發生器電路的實際工作過程，在分析一種移相全橋脈寬調制下串聯負載諧振電源供電的臭氧發生器電路的基礎上，提出了採用微分差分方程來描述電路的工作過程，並給出了電路可能的工作軌跡。
  16. Firstly, according to the detailed analysis on the mathematical model of pmsm, the principle of field oriented control ( foc ) is illustrated. spwm and svpwm are analyzed and contrasted in detail too, and the digital realization techniques based on dsp are given

    本文首先在分析永磁同步電機數學模型的基礎上，闡述了永磁同步電機矢量控制基本原理；對正弦波調制技術（ spwm ）和空間矢量調制技術（ svpwm ）兩種脈寬調制策略進行了詳細的分析和對比研究，給出了基於dsp的數字化實現方法。
  17. The system can generate three - phase spwm pulses and has following characters : the range of modulation frequency is from 0 khz to 4 khz. and can be divided to 7 classes to control. the carrier frequency may be selected up to 24 khz, and can be divided to 8 classes to control ; rotational frequency is defined to 16 bits

    該系統能產生三相六路正弦脈寬調制（ spwm ）波形;調制頻率范圍為0 4khz ，分7級控制; 16位的速度控制解析度;載波頻率分8級控制，最高可達24khz ;系統介面兼容intel系列和motorola系列單片機;該系統控制簡單、精確，易修改，可現場編程;同時具有脈沖延時小、最小脈沖刪除、過壓和過流保護功能等特點，可應用於pwm變頻調速系統的全數字化控制。
  18. In high precision dc servo system, the pwm power amplifier based on power electronic devices is mainly used

    在高精度伺服控制系統中，大多採用基於電力電子器件的脈寬調制型功率放大器，簡稱pwm功率放大器。
  19. The techniques with two different methods are classified as : the mode of pulse width modulated, and the difference of control signal. the advantages and disadvantages of each method is analyzed and compared, and where each method is more adapted to is pointed out. a type of switching power supply management ic based on current mode control method is designed which is a pwm boost converter

    本文全面分析、描述了dc - dc開關電源變換器的控制方法，並依據脈寬調制的方法何採用控制信號的選取對控制方法進行了分類，詳細闡述了各種控制方法的基本原理，分析比較了他們各自的優缺點，指出了每種控制方法所使用的場合。
  20. In this thesis, based on a digital signal processor tms320f240, a controller for pmsm is researched an designed. we analyzes the mathematics model of pmsm, researchs vector control of pmsm and space vector pwm, discusses the controller of position, speed and current, designs the mrfas position controller, pid speed controller and pid current controller, sets up pmsm ac servo control system, designs dsp controller, and develop the corresponding sofeware. at last, the designed controller is simulated under matlab / simulink, and the results are gived

    分析了水磁同步電機的數學模型，研究了永磁同步電機的矢量控制方法和空間矢量脈寬調制原理，討論了位置環、速度環和電流環的控制方法，設計了模型參考模糊自適應位置控制器、 pi速度器和pi電流控制器，組建了永磁同步電機交流伺服控制系統，設計dsp控制器，並開發了相應的軟體。最後在matlab simulink環境下對系統進行了動態模擬，並給出了模擬結果。
分享友人
分享到 Line

分享到臉書