自動制圖硬體 的英文怎麼說

中文拼音 [zìdòngzhìtúyìngtǐ]
自動制圖硬體 英文
hardware of automated cartography
  • 自 : Ⅰ代詞（自己） self; oneself; one s own Ⅱ副詞（自然;當然） certainly; of course; naturally; willin...
  • 制 : Ⅰ動詞1 （製造） make; manufacture 2 （擬訂; 規定） draw up; establish 3 （用強力約束; 限定; 管束...
  • 圖 : Ⅰ名詞1 （繪畫表現出的形象; 圖畫） picture; chart; drawing; map 2 （計劃） plan; scheme; attempt 3...
  • 硬 : 形容詞1 （堅硬） hard; stiff; tough 2 （剛強; 堅定; 強硬） strong; firm; tough; obstinate 3 （勉...
  • 體 : 體構詞成分。
  • 自動 : 1 （自己主動） voluntarily; of one s own accord 2 （不憑借人為的力量） automatic; spontaneous 3 ...
  • 硬體 : hardware
  1. After the users input control tasks in three modes : natural language, electric sheet or flow char, the computer will receive the information of control demands by data mining and knowledge discovery. and then illation is leaded to select the hardware and program the software in the inner of the computer. afterward, control program is transformed in the file format of exiting simulation software by using the simulation interface and is opened in the simulation software

    用戶只需在pc機上以自然語言或繪制控制流程圖、填寫表格的方式輸入控制任務，然後在系統內部經過數據挖掘和知識發現分析得到可用控制要求信息，並自動引導推理求解過程進行硬體選型和生成相應的控製程序，最後利用模擬介面，自動將控製程序轉化為現有的控制模擬軟體的文件格式，並在控制模擬軟體中，從而用戶可以對生成的控制系統進行模擬，檢查設計的正確性。
  2. This dissertation focused on the research of real time image grabbing and fruit grading control system, which including the design of software and hardware of the control system, and the realization of automatic control functions

    本課題根據目前國內水果分級自動化研究的現狀，借鑒國外的先進技術和經驗，對用於水果實時分級的動態圖像採集和分級自動控制進行了系統的研究，研究著重於動態圖像實時採集和分級控制系統的軟、硬體以及自動控制功能的實現。
  3. The exploitation and study of this system have got great success, compared with the ones of the same type, this system is more open and more easily used to merge with cad and cam, it runs stably, is convenient to be maintained and the interface is friendly and intuitional. its usage can be grasped quickly. according to the input information, it can automatically display different properties of nc codes in different colors, and zoom in or zoom out the figure of tool nose paths dynamically

    本系統的開發研究已取得實質性成果，與國內同類的數控系統相比，具有真正的開放性，易於實現與cad cam軟體集成，運行穩定，維護方便，界面友好直觀，易學易用，能根據輸入自動顯示不同顏色以區廣西大學頎士學趕文募于； m咖ss平臺肘開俠尤三劫肛前喊在系統開發研窮分代碼的屬性，能動態縮放顯示刀具軌跡圖形，此外，它有較好的多任務性和獨立性，能在加工時執行其它windows應用程序而不影響加工，控制器甚至能在pc端操作系統關閉時繼續完成加工，可用軟體控制面板或硬體操作面板兩種方式操縱機床。
  4. The hardware circuit design include : industrial control computer configuration, selection of industrial control board type, design of the power supply and monitoring interface circuit, design of signal processing interface circuit ( the constant current source circuit, the time base signal processing circuit, the processing circuit for the signal to be measured ), design of panel control circuit, design of the system self - checking circuit, and etc. the program flow hart include : main program flow chart, system boot - strap self - checking program flow chart, manual static testing program flow chart, semiautomatic static testing program flow chart, automatic static testing program flow chart, dynamic testing program flow chart, transient testing program flow chart, source voltage and current monitor program flow chart, investigate function testing program flow chart, and etc. the measure system offers six working power supplies, the signal of time base, the signal of constant current source, sine wave signal and step to leap signal, and measures the frequency of the output pulse signal of the wide range pulse convert circuit accurately under three kinds of different test state ( static form, dynamic form and transient form )

    硬體電路設計包括：工控機配置、工控板卡選型、產品電源及監控介面電路設計、信號處理介面電路（恆流源電路、時基信號處理電路、被測信號處理電路）設計、面板控制電路設計、系統自檢電路設計等。程序流程圖包括：主程序流程圖、系統開機自檢程序流程圖、手動靜態測試程序流程圖、半自動靜態測試程序流程圖、自動靜態測試程序流程圖、動態測試程序流程圖、暫態測試程序流程圖、電源電壓和電流監控程序流程圖、研究功能測試程序流程圖等。測試系統提供六路工作電源、時基信號、恆流源信號、正弦波信號和階躍信號，並對三種不同測試狀態（靜態、動態、暫態）下大量程脈沖變換電路輸出脈沖信號的頻率進行精確測量。
  5. System synthetically uses digital ultrasonic flaw detection technique, computer technique, auto control technology and constructs intact hardware system ; constructs software system including complete locomotive wheel - set graphics base, diagnosis document database, checkout result database and smart analysis module by investigation, summarization, test, theory analysis etc.

    為此，提出了機車輪對智能超聲波探傷系統的總體方案，該系統綜合利用數字超聲探傷技術、計算機技術、自動控制等技術，構成完善的硬體系統。通過調研、總結、試驗、理論分析等手段建立完善的機車輪對圖形庫、診斷文檔數據庫、檢驗結果數據庫及智能分析模塊等軟體系統。
  6. At the same tune, the paper analyses and discusses the control projects of the above parts. as for the hardware of the control system, on principle of reliability and considering the badly working condition of the vibratory roller, the paper chooses the special controller sp ecializing in the realm of construction machinery ' s control system in order to insure the reliability of the control system and simplify it. about the control quality of the system, the paper establishes the mathematical modes of the frequency modulation system and the amplitude modulation system, analyses the irrationality of the amplitude modulation project, puts forward to apply proportional - integral - differential controller ( pid controller ) to the traveling system and frequency modulation system

    作為控制系統的方案設計的基礎，本文首先對影響壓實效果的振動參數進行了分析；然後針對智能振動壓路機的功能要求，將控制系統分為壓實參數的自動和手動控制、行走控制、轉向和蟹行控制以及智能灑水控制等幾個部分，對各部分的控制方案進行了分析對比和論證；在控制系統硬體設計方面，以可靠性為原則，考慮到振動壓路機的惡劣工況，選擇了專用於工程機械控制領域的專用控制器，使系統的硬體設計得以可靠性保障和簡化；針對控制系統控製品質問題，建立了調頻和調幅系統的控制模型，對調幅系統的控制不合理性進行了分析，提出採用pid控制器對行走和調頻系統進行校正；在軟體設計方面，對各個控制部分進行了軟體編程流程圖設計。
  7. The solar power system and the design of hardware circiut of the traffic signal lights had been introduced in detail, and the software flows have also been given

    介紹了太陽能供電系統：設計了自動控制交通信號燈的硬體電路，並給出了相應的軟體流程圖。
  8. The thesis finished a sample instrument used in measurement node. it is based on 8 - bit micro controller unit and has smart functions including auto calibration, auto scale change and auto balance of whetstone bridge. the data can be processed, stored, transferred and displayed in the sample device

    本文完成了測試系統中基於16位微處理器的網關的硬體架構和軟體實時多任務內核的設計；研製了基於8位微處理器的具有自校正、自動量程轉換及測試電橋的自動調平功能的測試節點樣機；實現了測試節點的數據處理、存儲、顯示和傳送；繪制並編寫了測試節點的硬體電路圖和軟體源程序。
  9. The algorithm of sequencable mark and description of the object for crack automatic identification is presented by means of pre - image process. on basis of visual c + + 6. 0 developing environment, the software function of controlling of magnetic partical testing engine and the stepping - motor is realized in c + + and mfc with objected programming method. the automatic system of the camshaft of small diesel engines automatic magnetic partical testing is realized, which is the predicted goal that we would achieve

    用計算機控制磁粉探傷機和步進電機的工作；解決了jpeg圖象格式在windows系統中visualc + +編程環境下的壓縮轉換、顯示和處理的問題；結合數字圖象的預處理，提出了通過圖象分析自動識別裂紋的順序目標標記與描述演算法；基於visualc + + 6 . 0開發環境，用c + +語言和mfc類庫，採用面向對象的程序設計方法，用軟體實現了對磁粉探傷機和步進電機等硬體系統的自動控制功能；實現了柴油機凸輪軸熒光磁粉探傷系統的自動化，達到了預期的目標。
  10. The important research is about the theory and methods of the cluster analysis in view of statistical theory, the theory and methods of fuzzy cluster analysis, the fkn " s structure and the fkn ' s study algorithm ( fkn, fuzzy kohonen network ) - the organic fusion of the fuzzy c - means algorithm and self - organized feature map neural network. the paper proposes the ifkn ( improved fkn ) on the basis of the hard classification idea and the soft classification idea, then carries on the cluster analysis of the artificial synthetic control chart time series through matlab program and tt ? cluster result matches the cluster result of the famous dataengine " s software of the intellectual data analysis and data mining from german mit company. finally, the paper discusses the applying of the cluster analysis to the control process, which can be widely applied to the pattern recognition of the parameter " s changing trend during the control process and the image partition processing, and utilizes the ifkn to recognize the thermotechnical parameter " s changing trend based on the engineering of clinker sintering rotary kiln automatic control system of guizhou " s aluminium factory, through which good effect is obtained

    數據挖掘技術在商業領域中已廣泛使用，然而在工業過程式控制制中的應用卻極少，本文正是在這種背景下，對數據挖掘中的聚類分析方法及其在工業過程式控制制中的應用研究作了償試，重點研究了基於統計理論的聚類分析理論和方法，模糊聚類分析理論和方法及模糊kohonen網路（ fkn ）的結構與學習演算法，即模糊c ? ?均值演算法與自組織特徵映射神經網路（ kohonen網路）的有機融合，並根據硬分類思想及軟分類思想提出了改進的模糊kohonen網路（ ifkn ） ，通過matlab編程對人工合成控制時序圖數據集進行聚類分析，其聚類效果與當今廣泛使用的數掘挖掘軟體平臺，德國mit公司著名的dataengine智能數據分析和數掘挖掘軟體的聚類效果相當，最後，論述了聚類分析在控制中的應用，它可以用於過程式控制制中的參數變化趨勢的模式識別及圖象分割處理等具體應用中，並以貴州鋁廠熟料燒結回轉窯自動控制系統為工程背景，利用ifkn識別其熱工參量變化趨勢，取得了較理想的效果。
  11. The computer control system of a high - speed industrial sewing machine is studied in the dissertation. the system ' s operation principle, the design nation with the core of 80c196kc mcu ( micro - chip computer ) also are discussed in the dissertation the methods of a minimum operation system of mcu, the principle circuit of signal adjusting, data collecting, keyboard controlling, led displaying, electromagnetic clutch and magnet valve power driver circuit etc. are proposed and realized

    論文分析了工業高速自動剪線縫紉機（簡稱工縫機）計算機控制系統的工作原理，提出了以80c196kc單片機為控制核心的系統設計方案，並詳述了關鍵部分的功能與實現方法。設計了電路原理圖，完成了系統軟硬體設計、安裝，調試，和對系統原理樣機的性能測試。
  12. It expatiates the implementation circuit of key technology of the clutter storage and binary detection in radar signal processing. the second part discusses implementation of radar data processing in this system. it introduces the c ~ - ~ 3 filter algorithm and software design of the auto - detect - system in details

    第一部分介紹了雷達信號自動檢測錄取和恆虛警處理的有關理論基礎和硬體實現，詳細闡述了雷達視頻處理中的雜波圖存儲、二進制檢測等關鍵技術的工程實現；第二部分介紹雷達數據處理在本系統的實現，詳細地介紹了-演算法原理和整個錄取系統的軟體體系設計，並就雷達錄取程序中有關難題的解決作詳細探討。
  13. In order to promote the population of the new technology, hecad software was developed by thermal energy research center of zhengzhou university. as a 2d cad drawing software, it realized the automatic design of process design, mechanic _ al design, components design and assembly drawing design of thelfsf. however, along with the development of software and hardware and the evolvement of design thought, not only 2d drawing but also 3d solid modeling is needed in modern design of heat exchang _ er ' s parts

    Hecad系統在零部件二維圖形和總裝圖的自動化繪制上取得了很大成就，但隨著計算機軟硬體技術的發展和設計理念的演變，在對換熱設備零部件進行二維設計的同時，需要機械產品的三維實體模型，而且在零部件三維模型基礎之上，設計者可以對設計模型進行工程有限元分析，得到其工況下的真實溫度場和應力場的分佈，以便使設計者能及時對零部件模型的設計缺陷進行修改和優化，最終設計出性能合格、重量較輕的理想產品。
分享友人
分享到 Line

分享到臉書