軸承的配合 的英文怎麼說

中文拼音 [zhóuchéngdepèigě]
軸承的配合 英文
bedding in of bearings
  • 軸 : 軸Ⅰ名詞1. （圓柱形的零件） axle; shaft 2. （對稱部分的直線） axis 3. （圓柱形的纏繞器物） roller; spool Ⅱ量詞（用於纏在軸上的線以及裝裱帶軸子的字畫）
  • 承 : Ⅰ動詞1 （托著; 接著） bear; hold; carry 2 （承擔） undertake; contract （to do a job） 3 （客套話...
  • 的 : 4次方是 The fourth power of 2 is direction
  • 配 : Ⅰ動詞1 （兩性結合） join in marriage 2 （使動物交配） mate （animals） 3 （按適當的標準或比例加以...
  • 合 : 合量詞（容量單位） ge, a unit of dry measure for grain （=1 decilitre）
  • 軸承 : [機械工程] bearing; axle bearing; bearing of shafts; gudgeon block; mechanical bearing; pillow; s...
  • 配合 : suitable; fit; matching; rhythm; go together
  1. Model gk39 high - speed bag sewing closer is adopted a special part, which the needlecan move together with the looper. the machine is equi pped with aluminum alloy house, gear running, needle bar and looper system to form double - thread chain stitch. the main running parts are adopted bearing and the machine has the special design such as automatic oil dripping lubrication system, roller feeding and needle feeding in step having the automatic cutting system

    說明：本機gk39為高速封包縫紉機，是唯一採用「紉針機構」針同步的封包縫紉機，採用鋁合金外殼，輪傳動，針桿挑線和彎針勾線，組成雙線鏈式線跡。主要轉動部位採用軸承，並配有自動滴油潤滑油路。
  2. Made with different columniform axeses for more silence and safe when turn the door can be used with other floor spring such as " crown " " new stars " " domar " " garzi " excluding its own brand

    配備多種圓柱形滾針軸承座，使門扇轉動更寧靜，更安全，除與自身品牌的精密配合外，還可與皇冠、新星、多瑪、蓋澤等地彈簧配合使用。
  3. It is composed of two components : level move and rotation. level move is realized by the co - operation of oil vat, handspike and synchronizer. rotation is realized by the brace and the triangle oriented axis

    平行移動是由液壓油缸推動，通過推動軸承傳到推桿、同步盤，並相互配合實現的；旋轉運動是由曲柄、三角架導向軸完成的。
  4. Based on the tribological principle and the theory of contact mechanics, it is feasible to adopt curvature - changing structure in the rock - bit journal bearing system. the structure and coupling relationship of curvature - changing journal bearing under the condition without friction have been analyzed and three kinds of sub - form structure configurations, namely, the pseudo - curvature - changing structure, the conformable curvature - changing structure, and the clearance curvature - changing structure, been differentiated according to the contacting features. the shape optimization and pre - running - in regulations of the contact surface of curvature - changing journal bearing under friction condition have been established. the results of rock bit journal bearing test indicate that the tribological behavior of the bearing can be effectively improved by curvature change based on both designing and pre - running - in

    基於摩擦學原理和接觸力學理論，提出了可在牙輪鉆頭滑動軸承中採用變曲率結構.在不考慮摩擦的情況下，就結構設計和配合關系等問題進行了分析討論，劃分了準變曲率、吻合變曲率以及間隙變曲率等3種結構形式；針對考慮摩擦時的變曲率結構，提出了接觸形狀優化和預磨合的實施方案.鉆頭軸承試驗結果表明，無論是預設計變曲率還是預磨合變曲率，都能改善軸承摩擦副的摩擦學特性，因而值得進一步研究和推廣
  5. Chapter 6, according to the certain motorcycle, it describes structural radiation yawp, rolling bearing, piston whack, yawp of matching gas of valve cam, gear mesh yawp, burning yawp and the yawp of exhaust and inhaust in details

    第六章介紹了對具體摩托車的結構輻射噪聲、滾動軸承、活塞敲擊、氣門凸輪配氣機構噪聲、齒輪嚙合噪聲、燃燒噪聲、進、排氣噪聲進行了全面分析。
  6. Model cs2 - dn high - speed bag sewing machine has fairly good capacity, adapted automatic lubrication system. we adapted roller bearing in some parts to accelerate the running speed and make sure the life span can be prolonged. this machine is suitable to make paper bag and woven plastic bag in the bag factories for mass produce. when it is equipped with automatic cutter, it formed high - speed bag making system

    ：本機cs2 - dn為性能優越的高速縫袋縫紉機，採用自動加油系統，並局部採用滾動軸承，轉速提高后，能確保使壽命的延長，適用於紙袋廠及紙塑復合袋等的製作，更適合於制袋流水線上使用，特別是和自動剪刀箱配套后，組成高速制袋系統，成為製作紙塑復合袋最理想的設備，可極大地提高復合袋的產量。
  7. The bearing's inner races were a tight fit to the table shaft.

    軸承的內圈與臺軸採用緊配合。
  8. Basing the analysis on the experimental data, the author provides the load - bearing capacity formula of the concrete short column confined by overlapping hoops under uniaxial compression and the relationship between characteristic value of hoop and spacing of hoop, which is of great practical value

    摘要通過實驗數據的分析，提出了軸心受壓復合方箍短柱正截面承載力的計算公式並給出了配箍特徵值與箍筋間距的關系，具有一定的實用價值。
  9. W e produce clutch bearings, tensioners and undertake processing bearings which are used in different kinds of autos. our customers all admit the quality of our products

    本公司主要業務包括生產國內外各種車型的離合器分離軸承，漲緊輪等。承接加工軸承等產品零配件，產品質量受到用戶廣泛認可。
  10. For the cantilever beam, the theoretical stiffness and limited capacity are slightly less than the test ones if considering only the steel beam and the reinforced bars in the negative moment zone with the concrete in the tension zone ignored

    結果表明：簡支組合扁梁，忽略彈性中和軸以下受拉的混凝土的影響，採用等效換算截面方法計算所得的剛度和極限承載力與試驗結果比較吻合；懸臂梁只考慮混凝土板中配置的負彎矩鋼筋，忽略混凝土，計算所得的剛度和極限承載力比試驗結果略微偏小，但相差不大。
  11. A common recognized method for the shaft alignment, is to set up a physical model, and appropriately locate each bearing in compliance with the required bearing load, stress and shear force and slop etc, so as to fix the shaft with the curve line as required and obtain a right distribution of bearing load

    對于軸系校中計算，國內外比較通用的方法是對軸系相關的要素進行處理，建立物理模型，按照規定的軸承負荷、應力，轉角等限制條件，確定各軸承的合理位置，將軸系安裝成規定的曲線狀態，以達到使各個軸承上的負荷合理分配。
  12. The outside diameter of the self - contained bearing is spherical to match corresponding spherical inside diameter of the housing providing self - aligning between these two members, which compensates for misalignments of the units resulted from errors in mounting and distorting of the foundation

    軸承的外徑與軸承座內徑為球面配合，兩者之間具有自動調心功能，可補償因安裝誤差產生的軸線不重合及安裝底面的變形。
  13. 5 results of an experimental investigation on shear behavior of l, t and + - shaped columns are presented. the effects of shear - span ratio, axial compression ratio, stirrup contents and loading direction on shear behaviors of l, t, and + - shaped columns are discussed. combining with test data of others, the formulas for shear strength of l and + - shaped columns are given

    5對l 、 t 、十形柱受剪性能進行了低周反復荷載試驗研究，討論了剪跨比、軸壓比、配箍率、荷載作用方向對l 、 t 、十形柱承載力和延性的影響，並結合他人試驗結果，提出了l 、十形柱的偏下線受剪承載力公式。
  14. Abstract : in order to process signal in depth and to extract the fault feature from original signal in machinery diagnosis ， the graphical display algorithm that can keep the data length of wavelet transform results the same as that of original signal is used. the fault diagnosis of a bend axial piston pump via b - spline wavelet that has linear phase is provided. the results of study demonstrate that the new method has excellent feature and the weak fault signal can be extracted from the strong vibration background of the pump

    文摘:採用具有線性相位的b樣條小波，應用圖形顯示演算法並結合小波變換快速演算法將信號分解到不同的頻帶上，且分解結果和原信號長度保持一致，可對信號進行深層次的處理，克服了傳統的信號處理方法不易提取微弱信息的不足.通過對礦用斜軸式柱塞泵振動信號的分析，分離出了配流副磨損、球鉸松動、缸體及泵軸支撐軸承的故障特徵，為液壓泵的故障診斷提供了依據，並為信噪分離、微弱信號提取及設備的早期故障診斷提供了一條有效途徑
  15. Cranes ; crane rail wheels with roller bearings, pressed - on gear wheels

    起重機.與大齒輪壓配合的帶滾柱軸承的起重機軌道輪
  16. Tg series small size generating sets are combined with advanced single bearing brushless generator and famous engine, it ? s direct - coupled between generator and engine, the generating sets have the characteristics of wonderful configuration, small measurement, light weight, easy operation and maintenance, it ? s reliable power supply for family as reservation source

    甘油三酯系列小型發電機組，結合先進的單軸承無刷發電機和著名引擎，它的直接耦合關系發電機和發動機，發電機組，有特色的精彩配置，測量小，重量輕，易於操作和維修，它的可靠供電家庭作為保留來源
  17. The rule of the axial force distribution in the src column summarized, and a reasonable formula for the axial force level ’ s calculation in src column is offered for the design. besides, the aseismic analysis methods for the src structures are listed, and the dynamic time history analysis and static push - over analysis for the whole structure are done. the character of the earthquake response in this kind of structure is analyzed and some advice for actual design is proposed

    同時分析了src柱中的軸力分配規律，給出了比較合理的src柱軸壓比計算公式;另外綜合敘述了適用於src結構抗震分析的方法，並且運用常用的設計計算軟體對整體結構進行彈性的動力分析和靜力彈塑性分析，得出src柱對結構的整體抗震性能有提高，可以在保證豎向承載力的同時增大整體結構的抗側能力，為以後的實際設計提供一定的依據。
  18. With the ideal of quality first ; customer first, we have established good and long - standing completion relations with domestic multiple famous modification plants. we will strengthen to cope rate and make joint - venture etc multiple varieties in technology and equipment, import and export compensation trading etc merging methods, we will widen the technology and development as well as capital invest in powder methods oil bearing shaft, structure parts, alloy products

    本公司以「質量為本，顧客至上」為理念，產品與國內多家知名整機廠有良好長期的配套關系。本廠將加大力度，與國內外同仁採用多種形式的技術設備合作合資進口補償貿易等聯合方式，加大粉末冶金含油軸承結構件合金製品的技術開發和資金投入，在國際國內大市場的浪潮中，力爭把企業建成為高起點高效益的行業佼佼者！
  19. Shaft and housing fits for metric radial ball and roller bearings except tapered roller bearings conforming to basic boundary plan

    米制徑向滾珠和滾柱軸承的軸和軸承座的配合
  20. Mounting dimensions and fits for rolling bearings

    滾動軸承的安裝尺寸和配合
分享友人
分享到 Line

分享到臉書