輥軸 的英文怎麼說

中文拼音 [gǔnzhóu]
輥軸 英文
roll shaft輥軸閘門 stoney gate
  • 輥 : 名詞[機械工程] （能滾動的圓柱形機件） roller
  • 軸 : 軸Ⅰ名詞1. （圓柱形的零件） axle; shaft 2. （對稱部分的直線） axis 3. （圓柱形的纏繞器物） roller; spool Ⅱ量詞（用於纏在軸上的線以及裝裱帶軸子的字畫）
  1. The mill consists mainly of rolls, frame, bearings, roll nip adjusting screws, heating and cooling devixe, emergency stop, lubrication system and such sctions as electrical controls and, etc. the mainelectric motor arives the front and rolls to rotate oppositly through reducer, drving gears and friction gears

    本機主要由輥筒機架軸承調距裝置加熱冷卻系統事故停車裝置潤滑系統和電氣控制系統等部分組成。
  2. The roller supports at a and b prevent transition in the vertical direction but allow rotation.

    A和B處的輥軸支承不允許沿豎直方向平動，但允許轉動。
  3. Roller screens are used in the limestone gypsum industry, in the power and the basic industry, in particular in coal handling plants

    輥軸篩輥軸篩在石灰業石膏業能源業以及基礎材料領域里被特別地應用在加煤設備上。
  4. Guiding parts, mandrels, calibration rolls, knives, plate cutters, inserts for percussion drills, masonry drill tips, calibration bushes, drawing cheeks, shearing knives, inserts for golfer shoes

    導向部分、心軸、校準軋輥、刀片、倒盤、沖擊鉆機的襯墊、鉆機鉆頭、校準襯套、拉模夾具、剪刀、高爾夫鞋的襯墊。
  5. Coarse - grained impact resistant grades for mining, working of stones and rock, building, mineral oil industry, percussion and hammer drill tips, inserts for mining cutters, chisels, asphalt cutters, picks, inserts for concrete - working, hammer cheeks rolls, hot wire rolling, ball pressure dies, brake blocks

    粗晶粒度的抗沖擊牌號，適用於采礦工業、採石、建築、石油鉆探工業、鉆頭和錘頭、礦刀的襯墊、鑿子、瀝青切刀、風鎬、混凝土製造的襯墊、錘子的滾軸、熱軋軋輥、子彈壓力沖模、剎車片。
  6. Roller axle graft knife

    輥軸植皮刀
  7. This material can be used to produce rolls of large size with the static compound casting technology so that the roll body is of great hardness and the roll shaft is of great strength and the roll will have good thermal stability and resistance to accident

    此類材質可用靜態復合澆注工藝生產較大規格軋輥，使輥身具有高的硬度而輥軸具有高的強度，表現出良好的熱穩定性和抗事故性。
  8. Be careful to keep the roller and plate clean

    注意使輥軸和版材保持乾凈。
  9. Technical condition of belt conveyor idler bearing for coal mining

    煤礦用帶式輸送機托輥軸承.技術條件
  10. Strict tolerance spindle, ground at both sides, for a perfect bearing coupling

    輥軸兩側有一對堅實耐磨的軸。
  11. They are installed above the screening surface of the roller screens

    破碎盤是同一個輥軸篩相結合起來而發揮作用的。
  12. The roller supports at a and b prevent transition in the vertical direction but allow rotation

    A和b處的輥軸支承不允許沿豎直方向平動，但允許轉動。
  13. A novel friction pendulum system ( fps ) with dual rollers is studied based on the multibody dynamics theory

    摘要應用多體動力學理論研究了一種新的輥軸型摩擦擺隔振系統。
  14. Direct drive to the rolls with heavy - duty helical bevel gears where the output shaft is directly coupled to the roll shaft

    高堅固的螺旋斜線軸承直接驅動輥筒。輸出軸直接連接輥軸，中間沒有任何傳動消耗。
  15. A cement concrete finisher, which has characteristics of simple structure, more practical use, easy operation, is introduced based on the disadvantages of the present cement concrete finisher with three rollers axle

    針對近年來水泥路面施工中使用的一種三輥軸式整平機所存在的不足之處，進行了改進設計並增加了某些功能，使之成為結構簡單，實用性更強，操作更簡便的水泥路面攤鋪抹平機。
  16. Abstract : the present paper introduces the history of development, operating principle and characteristics of the rolling mill with axial shifting roll as well as its application in the country, analyzes the feature of the shape control for the currently most broadly applied hc rolling mill and discusses in detail the setting up of the roll system

    文摘:介紹了軋輥軸向移動軋機的發展過程、工作原理、形式特點以及在國內的應用情況，分析了目前應用最普遍的hc系列軋機的板形控制特性，並對輥系配置進行了深入的探討。
  17. The work roll bending on five stands are adjusted based on the periodical change of work roll shift position to decouple the coupling between edge drop and flatness control and obtain the optimum flatness control

    該模塊根據5個機架的工作輥軸向位置的變化周期性隨動調整5個機架的工作輥彎輥，化解平坦度和邊降的耦合關系，以獲得最佳的板形控制效果。
  18. The crushable constituents of the feed material are crushed between the crushing discs and the pressure rolls and pass subsequently the screening openings

    物料的可碎部分在破碎盤和壓力軋輥之間被破碎，然後透過輥軸篩落下。
  19. The work principle and identity of the press with cone - shaped roll have been introduced with expounding use of plc to control the production of such machine of which the technology and control have been based as design of the hardware and software of control system

    摘要介紹了軸向軋制的雙錐輥輾壓機的工作原理和特性，闡述應用可編程式控制制器控制雙錐輥軸向軋機的生產，並且針對其工藝和控制要求，從硬體和軟體進行了控制系統的設計。
  20. But the traditional static design method is based on statics and seldom contains guidelines for incorporating the dynamic behavior of the moving belt. large safety factors are employed to accommodate most dynamic stresses in the belt. this can not only increase total cost but also give rise to system instability and higher dynamic stresses that can damage the belt, drums, idlers, bearings and other parts of the conveyor

    在高速情況下，帶式輸送機存在的主要問題之一是起制動過程中輸送帶的動張力問題，而傳統的靜態設計方法將輸送帶視作剛體，並且在靜力學基礎上按靜止或勻速運行狀態對輸送機系統進行受力分析和參數設計，將動張力以一定系數計入，用加大安全系數方法提高設計可靠性，這不僅會使帶式輸送機的成本提高，還可能引發起制動過程中較大的輸送帶動應力及運行過程中的不穩定性，從而導致輸送帶接頭的失效及滾筒、托輥、軸承乃至其它部件的損壞。
分享友人
分享到 Line

分享到臉書