造型的輪廓 的英文怎麼說

中文拼音 [zàoxíngdelúnkuò]
造型的輪廓 英文
counterprofile
  • 造 : Ⅰ動詞1 （做; 製作） make; build; create; produce 2 （假編） cook up; fabricate; concoct 3 [書面語...
  • 的 : 4次方是 The fourth power of 2 is direction
  • 輪 : Ⅰ名1 （輪子） wheel 2 （像輪子的東西） wheel like object; ring; disc 3 （輪船） steamer; steamboa...
  • 廓 : Ⅰ形容詞（廣闊） wide; extensive Ⅱ名詞（物體的外緣） outline
  • 造型 : 1 （創造物體形象） modelling; profiling; mouldmaking 2 （創造出來的物體形象） model;mould3 [機械...
  • 輪廓 : outline; line; lineament; contour profile; rough sketch
  1. The paper also does some deep research on the mesh characteristic of the mechanism, analyses the cause o f the cam profile error and index error during working, using object - oriented method, vc + + and pro / toolkit, performs second development to pro / engineer, completes entity proplasm of the cam mechanism using only few parameters, the press angle calculate module, error analysis module and curvature calculate module are built on the basis of it

    然後通過對弧面分度凸輪加工中產生廓面誤差及工作時產生分度誤差原因的分析，建立了計算加工和分度誤差的數學模型。應用vc + +和pro toolkit對pro engineer進行二次開發，建立了弧面分度凸輪機構的參數化設計和三維造型及壓力角、誘導主曲率等運動特性和誤差分析軟體系統。
  2. Based on the long term study on design knowledge, the principle of nc machine tools design, and visual perception theory, plus result of nc machine tools design task analysis and nc machine tools shape image scale experiments, and by the analysis of case knowledge along with case shape in cbid system, we found the case knowledge classifying regulation which is based on the engineer and designer ’ s nc machine tools design process study, raised the case shape classifying regulation by cooperation of classical mechanical layout and key profile

    通過對cbid系統案例知識和案例造型的分析，基於研究小組對設計知識的長期研究、數控機床產品設計的原則和人類的視知覺原理，輔以數控機床造型設計任務分析實驗和數控機床造型意象尺度實驗的結果，提出了以工業設計師和工程師的數控機床設計思維過程研究為基礎的案例知識分類規則，以及以典型結構布局和關鍵輪廓相結合的案例造型分類規則。
  3. Abstract : through a series of hydraulic model tests for researching actual power tunnel operation, a conclusion is reached that in order to get a better flow pattern the profile of the wate - carrying structure should be adapted to the variation of water streamline shrinkage, flow velocity and pressure intensity. the configuration and dimension of the kinetic energy dissipator should be selected carefully to make the water tunnel safe and reliable at different levels of diversion dischage

    文摘:針對實際工程中的發電引水隧洞運行的各種工況進行了水工模型試驗研究，指明要獲得良好的水流流態，過水建築物各部位結構輪廓的造型應適應水流流線的收縮、流速及壓強的變化；為使引水隧洞在各級引水流量下能安全可靠地運行，需慎重確定洞內消能工的體形和尺寸。
  4. Jade this piece reflect to chisel style wang week such as the west, cancel the line except pair of shang dynasty, a rough slope line has appeared, has used israel as the other outlines of eyes, ear, mouth, body, end, etc., use thread qiu s strength to be smooth, vivid naturally, make the model clear, brief but comprehensive and strong

    此玉件反映了西周的琢王風格，除商代的雙勾線外，出現了粗獷的一面坡線，用以作為眼睛耳口身尾等的外輪廓，用線遒勁流暢，生動自然，使造型清晰，簡括有力。
  5. Place is the permanent brand of architecture and place creation is always the research project of architects with the development of the age ， place ? ? the end results of human material culture and spirit culture ? ? undergoes storm and stress but the real meaning of place still has clear and precise line of thoughts human 、 building 、 scenes ? ? poetic independent existing space space creation ? ? expresses and shows the real meaning of place ， interlaces the changing objective and positive multiple affirmation and negation but the road of research is still continuing ： seeking the new idea unanimous with the age human 、 building 、 scenes answers the place ， multi - dimensional system answers place creation the twenty - first century is the age of variety ， after discovering the complex phenomena ， research the age nature of place ? ? obscurity ， attempt new idea of creation ： obscure edge through bluring the edge of building and city ， break the separating condition of building and city ， unify the urban structure actively ， propel the union of building and city through openning design ； through bluring the edge of building and environment ， break the condition that environment attaches to building ， make landscape design become natural ， and combine them into ecologic scene of building and multiple experence of scene ： through bluring the edge of building and universe ， break the rational outline of building ， create multi - dimensional sensational edge of shape ， make building become an earth scene ， just like the mirage of flourishing city ， and prompt to exploit underground space

    人、建築、場景解讀了場所，多維的系統解讀了場所創作。二十一世紀是多元化的時代，在揭開紛繁交錯的現象面紗之後，探索場所的時代屬性? ?模糊性，嘗試新的創作理念：模糊邊緣。試圖通過模糊建築與城市的邊緣，打破建築與城市的分離狀態，動態整合城市肌理，以開放型的設計推動建築城市一體化；通過模糊建築與環境的邊緣，打破環境是建築之外附屬的狀態，使環境景觀設計自然而然化，並將二者融合形成綠色生態的建築場景與多層次的景觀體驗；通過模糊建築與天地的邊緣，打破建築理性的邊緣輪廓線，塑造多維感性邊緣的形體，使建築成為一種大地景觀，猶如繁華都市裡的海市蜃樓，並同時帶動了地下空間的探索。
  6. This dissertation proposes an algorithm to solve the problem by constructing transition contours using active contour model. the algorithm considers the transition contours construction as a growing process, so it is based on higher layer knowlege and can ensure that transition contours are similar to trunk contours and branch contours, and also reconstructed transition surfaces at branch points are smooth. the contours are connected using adjacent contours synchronous marching algorithm

    採用基於全局的柱體生長法來判斷斷層間輪廓的相互對應關系；針對輪廓線表面重建中的難點問題?分叉問題，提出了一種基於主動輪廓模型的過渡輪廓構造方法，這種方法從物體主動生長這一角度出發考慮過渡輪廓的構造，能夠產生綜合兩斷層上輪廓特徵的過渡輪廓，是一種基於全局性高層信息的有效輪廓構造演算法；利用相鄰輪廓線同步前進法進行輪廓拼接。
  7. For bilateral symmetry objects, the techniques on symmetry - point detection and symmetry - axis extraction are presented based on harmonic conjugation relationship. for rotated symmetry objects, the techniques on rotated units description and rotated symmetry center extraction are presented based on center invariants of objects. further more, by using 3d invariants and 2d projective transformation, an approach to recover shape from part symmetry objects is realized on some conditions

    （ 3 ）深入分析了2d對稱性目標透視成像的幾何特點，將共點四線交比用於目標輪廓上的關鍵點的特性描述中；利用調和共軛關系，提出了一種針對左右對稱型目標的對稱點檢測和對稱軸提取的演算法；利用交比關系構造了目標的形心不變量，提出了一種針對旋轉對稱型目標的旋轉對稱單元判定、旋轉中心提取的演算法；進一步利用3d不變量和2d射影變換，實現了一定條件下的對稱性目標的形狀恢復技術。
  8. In triangle plane filling between layers, the loop matching operator between layers was adopted, which is that the loops were matched according to their characters, geometry centers and perimeters. four kinds of regular algorithm in filling between layers were analyzed, and the shortest diagonal algorithm, which was rather fit to this dissertation, was adopted in this dissertation. the contour loops of section were grouped and each loop was split to make each loop become a single outer loop that was triangle split with delaunay algorithm

    在層間三角面片填充方面，採用層間輪廓環按環的性質、幾何中心和周長進行匹配的層間匹配演算法;分析了層間三角面片填充的四種常用的演算法，並根據本文需要選用並實現了最小對角線法;端面三角劃分時，將端面的輪廓環進行分組，再對每組環進行切分處理，使得每組環變成一個單一的外環，對單一的外環按delaunay演算法進行三角劃分;將所生成的三角面片按規定的格式寫入stl文件，生成可直接為快速原型製造所接受的stl文件格式。
  9. Efficacy : the cleanness, moisture, fashion and action of this mud will make it available to form any fashionable and clear - cut hair style leading the energetic fashion only if you rub at random

    功效：清爽滋潤不粘膩，時尚動感，只要隨意搓揉即可塑造新潮前衛發型，使造層次輪廓鮮明，領略動感活力的潮流。
  10. The bending stress and the contact stress of the circular arc gear and involute gear are also analyzed and compared. secondly, according to design and manufacture characteristic of the micro - gear, the direct design method called “ deviation function ” is proposed

    第二，根據微型齒輪傳動設計與製造的特點，提出了一種設計微型齒輪輪齒齒廓曲線的方法，即偏差函數法設計齒輪齒廓。
  11. Creatively, this paper advance involute as the tooth form that has been used widely in the engineering, and we also bring forward a design idea that tooth can be distributed continuously on spherical surface. based on those ideas, we invent the spherical gear of ring involute tooth. it is proved that this mechanism overcome the two big objections of traditional gear by solid model, and so a great breakthrough is achieved in the gear drive field. 2

    本文創造性地提出了採用工程上廣泛應用的漸開線作為齒廓曲線，並將輪齒沿緯度方向在球面上呈連續分佈的設計思想，在此基礎上發明了漸開線環形齒球齒輪機構，實物模型證明，該機構從根本上克服了傳統離散齒球齒輪存在的傳動原理誤差和加工困難兩大障礙，在齒輪傳動領域取得了重大突破。
  12. In the last part of the article applications of space cubic ph to sweep surface modeling and pipe surface modeling are introduced, and sufficient criteria that guarantee that the offset of a sweeping surface are generated by the offset curves of the profile curve is investigated

    最後，本文介紹了空間三次ph曲線在掃曲面和管道面造型方面的應用，並研究了一掃曲面的等距面為該掃曲面輪廓線的等距線所生成的充分條件。
  13. According to the characters of three - dimension engineering, it designs data structure and data model by the method of oop. data structure of oop is applied to the modelling based on graphics. it realizes the display of three - dimension graphics in engineering. the system can import / export 3ds files. it realizes selection, feedback of 3d shape and the management of 3d shape ' s properties ; 3d shape frome 2d contour lines and the medial axis of a convex polygon and an arbitrary simple polygon are discussed

    針對三維工程的特點，採用面向對象的思想進行數據結構與數據模型的設計；將面向對象數據結構應用於基於圖形的建模技術中，實現了工程中三維圖形的顯示，並通過與3ds文件的介面，導入造型復雜的模型進行補充；基於二維設備的三維交互問題，實現了對三維形體的選擇、反饋以及三維形體的屬性數據的管理；對由二維輪廓線構造三維形體，本文創造性的提出了利用多邊形的中軸來構造三維形體，並修正了求多邊形中軸的演算法。
  14. In order to facilitate the advancement of micro - fabrication and micromachine technologies, development of measurement methods for both profile and dimension of micro - components are essential. one of the methods available for this is a small three - dimensional profile measurement apparatus with micro - probes. for such an apparatus, the probes must be fabricated with optimal shape for individual part measurement. in this research, micro - electrical discharge machining ( micro - edm ) which has extremely small machining force and is applicable for fabrication of various types of probes, is used for probe manufacturing. various types of probes which are installed to the small three dimensional profile measuring apparatus based on principle of scanning tunneling microscopy ( stm ) are fabricated by the proposed method. the probes fabricated have been successfully used for the measurement of several micro - parts and the results show the effectiveness of the proposed method

    為了推動微加工和微機械技術的進步，微型零件輪廓和尺度測量方法的發展非常重要.可行方法之一就是使用帶微探頭的小型三維輪廓測量儀.這種儀器的探頭必須針對某個零件的測量，按照最佳外形製造.微放電加工有著極小加工力，可用於各種探頭的製造，本研究中用它進行探頭加工.用這種方法製造了多種探頭，將其裝在基於掃瞄隧道顯微技術（ stm ）的小型三維輪廓測量儀上.所製造的探頭已被成功地用於各種微元件測量，結果表明此方法可行
  15. From the side, the vehicle displays a strong profile with its prominent front wings, deeply sculpted sides, and particularly generous rear wings

    從側面，車輛表現出強烈的輪廓，其突出的前翼，造型非常方特別慷慨後方翅膀
  16. The profile equation of whole profile meshing is worked out by the meshing theory, and the numerical calculation program of the new profile is accomplished. the 3d modeling of the gear rotor and the movement simulation of the gear assembly system are realized. the interference and sidegap of gear meshing are analysed by 3d modeling of the gear, so it can be judged that the gear profile is right whether or not before machining

    運用齒輪嚙合原理，推導出全封閉齒廓嚙合型面的齒形方程，完成齒形相應的數值計算程序，並對齒輪轉子進行三維實體造型及齒輪裝配體運動模擬的研究；用齒輪三維造型來進行裝配模擬並分析嚙合副裝配的干涉和側隙，在加工前就能對齒輪齒廓形狀的正確與否進行判斷。
  17. This thesis, based on the research of nc machine tools form design and humanized interface technology, analyzes the cognitive mode of nc machine tools, brings forward the classified search mode based on the profile lines, the typical overall arrangement of the face and types of nc machine tools as well. the user can search rough model of solidworks from icaid and finish the form design with the aid of icaid. this thesis also analyzes the current technologies of caid, cad, vr, server and internet, brings forward the expression way of design knowledge based on the second development of solidworks and the close conjunction of viewpoint and solidworks

    論文以實際的數控機床造型設計以及人性化界面技術研究為基礎，分析了人們對于數控機床產品的認知模式，提出了基於側面輪廓線、立面典型布局以及數控機床種類的分類檢索模式，為用戶提供solidworks草模，輔助用戶完成設計；分析了目前caid 、 cad 、虛擬現實、服務器、網路技術等技術條件，提出了基於solidworks二次開發以及與viewpoint無縫連接的設計知識表達方式；提出了基於client / server的輔助設計模式以及合作設計平臺的實現形式。
  18. In front of the detailed construction meeting the conformity, will be allowed to outline a future the blueprint, will be able to perform its own functions by each, the process will send for approval the earth to open the document and the plane descriptive note, the three - dimensional model proposal, appraised in the optimization economics and trade conformity strategy, the best work outline will be outstanding however lives

    詳實的建造的會前整合，可以勾勒出一幕未來的藍圖，由各部會各司其職，經過送審土開文件與平面圖說、立體模型提案，在最佳化整合的策略評估，絕佳作品的輪廓卓然而生。
  19. The material also is recommended for contour extrusion and for blow molding of toys, gaskets and other parts requiring permanent flexibility, stress cracking resistance and low temperature toughness

    這種材料也被推薦用於製造玩具，墊圈和其他要求有長期的彈性，抗應力裂紋和低溫韌性的輪廓擠出成型和吹塑成型中。
  20. Secondly, after extracting the initial contour of the object, the energy function of active contour model was constructed

    在此基礎上提取出活動輪廓模型的初始輪廓點，然後構造活動輪廓模型的能量函數。
分享友人
分享到 Line

分享到臉書