鑄造工藝材料 的英文怎麼說

中文拼音 [zhùzàogōngyìcáiliào]
鑄造工藝材料 英文
consumable materials
  • 鑄 : Ⅰ動詞（鑄造） cast; coin; make Ⅱ名詞1. （古國名） zhu, a state in the zhou dynasty2. （姓氏） a surname
  • 造 : Ⅰ動詞1 （做; 製作） make; build; create; produce 2 （假編） cook up; fabricate; concoct 3 [書面語...
  • 工 : Ⅰ名詞1 （工人和工人階級） worker; workman; the working class 2 （工作; 生產勞動） work; labour 3 ...
  • 藝 : Ⅰ名詞1 （技能; 技術） skill 2 （藝術） art 3 [書面語] （準則） norm; standard; criterion4 [書面語...
  • 材 : 名詞1 （木料） timber 2 （泛指可以直接製成成品的東西; 材料） material 3 （供寫作或參考的資料） ma...
  • 料 : 名詞1 （材料; 原料） material; stuff 2 （喂牲口用的穀物） feed; fodder 3 （料器） glassware 4 （...
  • 鑄造 : [冶金學] cast-on outwell; foundry; cast; casting; found; founding
  • 材料 : 1. （原料） material 2. （資料） data; material 3. （適于做某種事的人才） makings; stuff
  1. Researching fields are foundry technique, plasticine, foundry equipment and automatization

    研究方向為鑄造工藝與造型材料鑄造設備及自動化。
  2. Deputy director of foundry technique and plasticine committee of foundry branch of china mechanical engineering association

    中國機械工程學會鑄造分會鑄造工藝及造型材料委員會副主任，
  3. The quality of furan sand castings is usually better than clay sand castings, however, some defects are also very easy take place with furan sand castings such as blow hole, metal penetration, veining, cracking, slag inclusion, hardness too low, surface recarburation, surface sulphuration, nodularity degeneration etc, which were usually caused by improper raw materials selection, improper method design, incorrect moulding or / and core - making

    摘要呋喃樹脂砂鑄件質量一般比黏土砂鑄件好，但如果原材料選擇、工藝設計、造型和制芯操作不當，也會產生氣孔、粘砂、脈紋、裂紋，夾渣、硬度不足、滲碳、滲硫和球化不良等鑄造缺陷。
  4. Taps on the main series of products using high - quality copper material, in italy advanced gravity casting process, fine grinding and polishing as from the surface using seven storeys space electroplating chromium plating method, the leading luster as people

    主要採用優質銅材料，在義大利先進重力鑄造工藝下，經精細打磨拋光而成，表面採用七層太空電鍍法鍍鉻，使龍頭光採照人。
  5. The company is located at zhejiang ningbo technology park and it engages mainly in the smelting equipment of magnesium and aluminum allo y, quantitative conveying ana pouring equipment, gas protection device and the magnesium alloy pressure casting parts. the more, it can provide services of technology development, achievements transferring, process revamping, material inspection, computer stimulation, etc. the company is based on the strong technical strength of the military technology and the research institutes and has a large number of senior research personnel. the company owns many patents and know - hows, among which the magnesium alloy smelting, gas protection, quantitative pouringas well as the later on processing technology has reached the world advanced levet. the company sticks to aim of quality first, credit supreme and would like to provide best

    公司位於浙江省寧波市科技園區凌雲路199號，是以生產鎂合金鑄件為主業，包括壓鑄低壓鑄造等，並具備技術開發成果轉化等功能的綜合性科技公司，以兵器工業和科研院所的雄厚實力為依託，擁有自主知識產權的多項專利專有技術和國際一流的技術裝備，擁有教授博士碩士等高級專業研究人員數名在鎂合金鑄造產品研製及后續加工方面，我公司擁有技術領先優勢，目前我公司為電動工具汽車摩托車零部件it行業以及軍工方面提供配套產品配套設備技術咨詢與技術服務技術轉讓及聯合開發，還可以進行工藝改造材料檢測檢驗計算機模擬等多項服務
  6. In metal matrix composites, thermal residual stresses will arise due to get ( coefficient of thermal expansion ) mismatch between matrix and fiber during cooling

    在擠壓鑄造的金屬基復合材料中，由於基體和纖維的熱膨脹系數相差很大，所以在制備過程中由高溫（工藝溫度）冷卻至室溫時復合材料中會有熱殘余應力產生。
  7. The technique of producing metal matrix composite include powder metallurgy, casting ( including stirring casting process, in situ contact reaction process, liquid - phase metal infiltration process, co - spray deposition forming process ), reaction mechanic alloying process

    制備金屬基復合材料的工藝分為粉末冶金法、鑄造法（鑄造法細分為攪拌鑄造法、原位接觸反應法、液相浸滲法、共噴射沉積法） 、反應機械合金化技術。
  8. The results show that, composite could be fabricated on the complicated surface by means of sodium silicate sand mold combination with vacuum infiltration process. when the substrate was 10 mm, composite layers reached 3 mm to 5 mm in thickness with high strength interface and less casting defect. microstructures of grey cast iron and low chromium cast iron matrix composites with various volume fraction has been analyzed

    結果表明：用水玻璃砂型（芯）加負壓鑄滲的工藝能夠實現復雜表面（曲面）顆粒增強復合材料的制備，澆注方式簡單可靠，基材厚度在10mm時，復合層厚度能達到3 5mm ，且復合層鑄造缺陷少，復合效果好，界面緻密而且結合強度高。
  9. It ' s the advantage of jmfc to apply the centrifugal casting technology to the small size of compound rolls, which characteristics are as follows : combining high hardness, anti - wear, impact and breakage resistance : spun cast the shell by proper charging of alloys and use high strength and impact ductility material as core

    將離心澆鑄工藝用於小型復合軋輥的製造，是金環廠的優勢，採用該工藝的軋輥具有以下特點：兼得高硬度耐磨損與抗沖擊抗斷裂性能：按耐磨性和硬度要求，將合金科學配比，溶解澆鑄成輥身的工作層，再採用高強度抗沖擊的材料澆鑄輥頸和輥芯，冶金結合，兩者兼得。
  10. Compared with other kind of precise casting processes, fcp can reduce the environment pollution caused by pattern and molding materials as well as realize near net casting

    與其它精密鑄造工藝相比，既可實現鑄件的近凈形化，又避免或降低了模具材料、造型材料對環境帶來的壓力。
  11. A special molding material ? expansion plaster used for this process could obtain 3 % expansion after being treated, which is beneficial to compensate dimensional contraction for plaster mold drying and alloy solidification

    工藝中所用的特殊造型材料? ?膨脹石膏經處理后可得到3 %的膨脹量，足以抵消鑄型因烘烤產生的尺寸縮小及合金凝固導致的收縮。
  12. With the correct compound designing, a composite layer with thickness of 1. 5to 6 millimeters was formed on the surface of casting by means of cast - sintering technique

    通過合理的成分設計和工藝參數的優化選擇，利用鑄造燒結技術，在鑄鐵件表面獲得了一層厚為1 . 5 6mm的耐磨復合材料層。
  13. With a decade of years of research and manufacture history on boilers and pressure vessel, complete quality control system, advanced production equipments, as well as well managed after sale service, " changcheng " autoclave becomes a brand trusted by many users, and has been used in fishery, chemical industry, glass industry, medicine industry, textile printing, heat insulating material, papermaking, timbering, civil construction and other industries

    十多年鍋爐壓力容器設計技術的潛心研究和製造歷史，完善的質保體系、先進的工藝裝備、無可挑剔的善後服務，鑄就「常成」蒸壓釜眾多用戶依賴的產品品牌，廣泛應用於漁業、化工、玻璃、醫藥、紡織印染、保溫材料、造紙、木材、加氣混凝土砌塊、粉煤灰砂、高強度水泥電桿、石膏蒸壓等眾多工業領域。
  14. Three factors, such as pull - up type, the materials and structure of crystallizing mould, and the temperature field in crystallizing mould, influencing on continuous up - casting for aluminum were analyzed, which laid the foundation of the application to continuous up - casting technology for aluminum bar

    分析研究了引拔拉坯制式、結晶模材料及結構、結晶模內溫度場三因素對鋁上引連鑄的影響規律，結果表明上引連續鑄造過程中施加適當頻率的反推和反推量有利於桿坯連鑄的持續，結晶模自身的性能及模內溫度場的狀態對金屬鋁桿上引連鑄工藝的實現有直接影響。
  15. This thesis fabricated successfully a wc particle reinforced iron matrix composite using a vacuum infiltration process for severely erosion and application in the slurry pump. the casting process was optimized. the microstructure and wear resistance were researched and analyzed

    本文針對承受嚴重沖蝕磨損的渣漿泵過流件，採用負壓鑄滲工藝成功制備了碳化鎢顆粒增強鐵基表面復合材料，改善和優化了復合工藝、鑄造工藝。
  16. Three kinds of injection sleeves construction, materials, surface treatment and application ranges of floating end face seal ring by die casting are expounded

    敘述浮動端面密封環壓力鑄造的三種壓射套結構、材料和表面處理工藝及其應用范圍。
  17. Abstract : three kinds of injection sleeves construction, materials, surface treatment and application ranges of floating end face seal ring by die casting are expounded

    文摘:敘述浮動端面密封環壓力鑄造的三種壓射套結構、材料和表面處理工藝及其應用范圍。
  18. Used solid - liquid reaction synthesis technology and stirring casting and metal mold chilling processing, al3fe particles and al3fe + al2o3 particles reinforced pure al matrix in - situ composites are fabricated. the metallography analysis shows that the intermetallic al3fe exhibits two kinds of crystalline state - primary crystal al3fe and eutectic crystal al3fe - in al + fe reaction synthetical al matrix in - situ composites

    利用固-液反應合成技術和攪拌技術，並結合金屬型激冷鑄造工藝，制備出了al _ 3fe粒子、 al _ 3fe粒子+ al _ 2o _ 3微粒強化的純al基原位復合材料。
  19. Good knowledge of national and international material standard. familiar with metal casting process, especially for stainless steel

    熟悉並掌握國內、國際主要的材料標準，熟悉金屬材料鑄造工藝，尤其是不銹鋼鑄造。
  20. Kyoei diecast is a casting factory that specializes in employing the diecast method in which products are created by making the liquid raw material flow into specialized dies at high pressure

    共榮die cast株式會社是一家採用拉模鑄造工藝生產鑄件的工廠。拉模鑄造是一種用專用金屬模具，高壓注入材料澆注模具的生產方法。
分享友人
分享到 Line

分享到臉書