靜轉矩 的英文怎麼說

中文拼音 [jìngzhuǎnjǔ]
靜轉矩 英文
static torque
  • 靜 : Ⅰ形容詞1. （安定不動; 平靜） still; calm; motionless 2. （沒有聲響; 清靜） silent; quiet Ⅱ名詞（姓氏） a surname
  • 轉 : 轉構詞成分。
  • 矩 : 名詞1. （畫直角或正方形、矩形用的曲尺） carpenter's square; square2. （法度; 規則） rules; regulations 3. [物理學] moment
  1. While the compressed electret micromotor adopt top - drive structure, the output torque of it is larger than that of side - drive structure

    扁平駐極體微電機採用項驅動型結構設計，此結構電動機的輸出轉矩比側驅動型靜電電動機要大。
  2. The structure of the upper platform on the simulating table that is put forward is analysed with analysis software ansys of finite element. and the mass of subjacent platform for simulating table is calculated with the method of equilibrium of moments under conditions of the simulating table is static or operating no take place overturn

    機械設計方面：設計了模擬轉臺上、下平臺的結構，並運用有限元分析軟體ansys對所提出的模擬轉臺上平臺結構進行分析，利用力矩平衡方法計算了模擬轉臺在靜止以及運動過程中不發生傾覆所需要下平臺的質量。
  3. Basing on the analysis about the reason that how the superabundant torque appears, direct torque control strategy is used to realize the servo control of two asynchronous motors and load system ' s simulation. the measure method of superabundant torque of the system, the valid method of static state torque and the benchmark of dynamic torque are given by testifying the system ' s speediness through experiments

    在具體分析加載系統中多餘力產生原因的基礎上，採用直接轉矩控制策略，實現了兩臺異步電動機伺服控制和加載系統的負載模擬實驗，通過實驗驗證了系統的快速性；給出了系統多餘轉動慣量的測量、靜態轉矩的校驗和動態轉矩基準的實驗的基本方案。
  4. Promax tension ind corp has long sold and manufactured a variety of custo mized air shafts / air chucks / safety chucks, edge position control systems / epc, powder / air / disk brakes and clutches, ac / dc motor control systems, re - winding / un - winding systems, tension control systems, web inspection systems, automatic color register systems, servo - vector control systems, mmi interface and supervisory control and data acquisition ( scada ) systems and others such as slitting, winding, laminating, extruding, coating, and gravure printing machines, even other auxiliary devices etc. for webs such as paper, films, rubber, textiles and foils

    本公司長久以來已經從事製造及銷售有關紙類，薄膜，膠片，紡織品，橡膠等薄片卷材的捲筒物控制糸統周邊設備，諸如氣漲軸，氣漲/安全夾頭，邊緣追蹤器裝置，磁粉/氣壓/碟式煞車器及離合器，交直流轉矩馬達控制系統，收放料車動系統，張力控制裝置，印刷機靜態觀測器，自動套色控制裝置，伺服向量控制系統，人機介面及監控系統及其他有關印刷，貼合，分條，復? ，塗布，上膠，押出，淋膜等產業機械
  5. Linear induction motor is an important kind of machines which have some merits such as simple structure, low cost, durability, convenience for maintenance etc. the subject of this thesis is to study a big circular ring linear induction motor, and the major works in this thesis are summarized as follows : ( 1 ) considering the effects of the finite length of primary core, one - dimension analytical solution for the air gap field is cited in this paper. based on it, the single layer winding magnetic field is studied. considering whole - pitched and short - pitched winding configuration with odd poles and half - fulled slots in both ends, the double - layer winding magnetic field is analyzed, respectively

    本文對大圓環直線感應電機進行了深入細致研究，內容包括： （ 1 ）本文採用有限長行波面電流作用於有限長鐵芯上的模型，引用了氣隙磁場一維解，研究了單層繞組磁場，奇數極半填槽雙層繞組在採用整距和短距時磁場的分析、比較，簡單介紹了二維解； （ 2 ）用有限元軟體ansoft對大圓環直線感應電機空載氣隙磁場進行了靜態分析，並分析了結果； （ 3 ）用軟體進行了額定電壓下的瞬態分析，得到了轉矩，位移，轉速隨時間變化曲線圖，利用單極性霍爾元件測定轉速並與軟體計算結果進行了比較，採用等效電路法計算了堵轉時的最大電磁力並做實驗進行了驗證，由實驗測得了三相電流波形，並與計算結果進行了比較，對其不對稱性進行了定性分析。
  6. As novel concept actuators, ultrasonic motors have been attracting intensive attention at home and abroad with their outstanding features such as low speed and high torque, large holding torque, rapid response, light weight and compact sizes, simple structure, and no magnetic disturbance, etc. traveling wave ultrasonic motors are especially attracting researchers ’ interest for their good controllability and flexible constructions

    超聲波馬達作為一種全新的驅動器，以低速大轉矩、靜態保持力矩大、響應速度快、體積重量小、結構簡單以及無磁場干擾等優點受到國內外的廣泛關注，其中行波超聲波馬達以其控制性能良好和結構靈活等優點尤為引人矚目。
  7. In this thesis, we use the random - matrix - theory to revise the following calculating methods : ( 1 ) the heat capacity and the spin susceptibility of the normal metallic small particles ; ( 2 ) the heat capacity of the conventional metallic small particles at the low temperature using the mean field approximation method ; ( 3 ) the heat capacity of the conventional metallic small particles at the vicinity of the critical temperature using the static path approximation method

    本文採用隨機矩陣理論，計算了： （ 1 ）正常態金屬小粒子的電子熱容和順磁磁化率。 （ 2 ）在平均場近似下，計算了超導金屬小粒子低溫區的電子熱容。 （ 3 ）在靜態路徑近似下，計算了超導金屬小粒子轉變溫區的電子熱容。
  8. As novel concept actuators, ultrasonic motors have been attracting intensive attention at home and abroad with their outstanding features such as low speed and high torque, large holding torque, rapid response, light weight and compact sizes, simple structure, and no magnetic disturbance, etc, and which have been applied to many fields

    超聲波電機作為一種全新的驅動器，以低速大轉矩、大靜態保持力矩、響應速度快、體積重量小、結構簡單以及無磁場干擾等優點受到國內外的廣泛關注，並在眾多領域得到了應用。其中駐波超聲波電機具有驅動和控制電路簡單，轉速平穩，波動較小等突出優點。
  9. Thus it is necessary to study moment resistance, rotation stiffness and rotation capacity of the joints. in this paper, six specimens on end - plate composite beam - to - column joints and two specimens on end - plate composite beam - to - column joints were designed to subject to static load. the factors of m - characteristics about semi - rigid composite joints, including bolts, profiled steel sheeting, beam, column, stiffen rib and reinforcement, are studied

    本文設計了6個端板型鋼-混凝土組合樑柱節點與2個端板型純鋼樑柱節點，通過對這些試件的靜力荷載試驗，重點研究了端板型鋼-混凝土組合節點的彎矩-轉角性能的影響因素，包括高強螺栓、壓型鋼板、型鋼梁、型鋼柱、加勁肋，以及混凝土板內縱向鋼筋配筋率等。
  10. A method is provided to measure the friction parameters of the bed. the maximum friction torque, coulomb friction torque, viscous friction coefficient and moment of inertia can be gotten by fitting the free reduced rate curve of the gimbals and measuring the motor current when the motor begins to rotate

    提出了一種測量轉臺摩擦特性的方法，通過對轉臺在無外推力作用下的速度衰減曲線的擬合以及電機啟動過程電流和轉速的測量，可以得到最大靜摩擦力矩、庫侖摩擦力矩、粘滯摩擦系數及轉動慣量。
  11. Some practical method to lifting the rated capacity of vsc - hvdc is discussed. ( 4 ) the subsynchronous oscillation ( sso ) characteristics of a synchronous machine connected to a static var compensator is studied with the complex torque coefficient method realized by time domain simulation, and some important conclusions are obtained which can guide the design and operation of svcs to avoid sso problem

    （ 4 ）基於時域模擬實現的復轉矩系數法，對與靜止無功補償器svc相聯接的同步發電機組的次同步振蕩（ sso ）特性進行了深入的研究，得出了一些重要結論，可為svc的設計和運行提供避免sso的依據。
  12. At the rated setting torque point, under the base speed, we found the equalizing link efficiently improves system performance comparing the results

    對比補償前和補償后的結果，在基速范圍內，在額定轉矩點，補償手段有效的改善了系統的靜態和動態性能。
  13. The models in the three phase and two phases static coordinates are made based on this, and the later are used in the study of direct torque control

    並據此建立了異步電動機在三相坐標系和二相靜止坐標系下的數學模型，後者用於直接轉矩控制的研究。
  14. In dtc system, the concept of space vector is introduced to analyze and control the ac motor, the electromagnetic torque and flux are calculated and controlled in the stationary coordinate, and the optimal pwm gating signals are generated to control the inverter to acquire high dynamic torque according to the output of the bang - bang regulators

    直接轉矩控制採用空間矢量的概念來分析三相異步交流電動機的數學模型和各物理量，直接在靜止坐標系下計算與控制交流電動機轉矩和磁鏈，藉助于離散的兩點式調節產生pwm信號，直接對逆變器的開關狀態進行最佳控制，以獲得轉矩的高動態性能。
  15. In the proposed technique the bemf waveform of bldcm need to be measured in advance at first, through computer simulation and frame transformation, the optimum q - axis current command is achieved. in order to minimize the torque ripple, the d and 0 - axis current command should be zero. furthermore, through reference frame transformation from dqo - axis to abc - axis, we can get the optimum current command in static abc reference frame

    在這種控制方法中首先測量出電機的實際反電動勢波形，然後通過計算機擬合和坐標變換，求得產生恆定電磁轉矩所需的q軸電流，令i _ d ~ * = i _ 0 ~ * = 0 ，通過坐標變換，得到三相靜止坐標系a - b - c下的參考電流i _ a ~ * ， i _ b ~ * ， i _ c ~ * ，利用電流滯環控制來產生pwm信號，由於這種控制方法中電流不會突變，從而可以較好的抑制轉矩脈動。
  16. The principle of i d = 0 control method is analyzed systematically based on vector control technique of pmsm. this thesis points out that vector control is more a static decoupling than a full decoupling. in fact, the i d = 0 control method of pmsm, which can realize torque linearization control, is a vector decoupling control

    主要內容概括如下: 1 .對永磁同步電機的矢量控制技術進行了系統的分析，深入地剖析了i _ d = 0控制的機理，指出矢量控制只是一種靜態解耦，並非完全解耦，永磁同步電機的i _ d = 0控制實質是一種矢量解耦控制，可以實現轉矩線性化控制。
  17. Due to 12 / 8 poles doubly salient permanent magnet motor, planar finite element method ( fea ) is applied to analyze the magnetic field inside the motor. and a series of static characteristics are investigated, such as field distribution, air gap magnetic density, field flux, inductance, static torque

    針對12 / 8極永磁式雙凸極電機，採用二維平面有限元法對電機內磁場進行分析計算，研究了電機磁場分佈、氣隙磁密、繞組磁鏈、繞組電感、靜態轉矩等一系列電機靜態特性。
  18. Firstly, i present a new structure of torque measurement ? rating torque sensor. secondly, introduce the fundamental principle of the dynamic torque. and then bring forward new methods of measuring flywheel moment and acceleration, which has been proved not only by theory, but also by experiment

    本文首先提出了轉矩測量的一種新結構? ?光柵靜態（平均）轉矩測量傳感器；然後闡述了動態轉矩測量的基本原理；接著提出了新的飛輪矩與加速度測量方法，並對其進行了理論推導及實驗證明；最後對提出的通用轉矩測量系統進行了硬體、軟體上的設計。
  19. In this paper, we established a model of compressed electret micromotor and analysed the electrostatic force between stator and rotor based on the electro statics principle. and meanwhile, we worked out the theoretical calculation formula of output torque of single - stator micro - electrostatic motor series. we designed the double - stator compressed electret micromotor successfully and conducted the calculation formula of output torque of 2pole - 2pole compressed electret micromotor

    本文基於靜電學原理，進行了扁平駐極體微電機的建模，對其定轉子間的靜電力進行分析，導出了單定子微型靜電電機系列的輸出轉矩計算公式，完成了雙定子扁平駐極體微電機的設計，給出了2極- 2極扁平駐極體微電機的輸出力矩計算公式。
  20. Little systematical research has been carried out long after the new start scheme was presented, especially lack of quantified analysis of the nature of the system and the characteristic of torque output in standstill and low speed range

    單相交流勵磁作為一種新型的起動方案提出后，一直還沒有系統地、從數量關繫上揭開該系統的內在規律，特別是靜止和低速時起動轉矩的特性。
分享友人
分享到 Line

分享到臉書