高強鋼筋 的英文怎麼說

中文拼音 [gāoqiánggāngjīn]
高強鋼筋 英文
high strength bar
  • : Ⅰ形容詞1 (從下向上距離大; 離地面遠) tall; high 2 (在一般標準或平均程度之上; 等級在上的) above...
  • : 強形容詞(強硬不屈;固執) stubborn; unyielding
  • : 鋼名詞(鐵和碳的合金) steel
  • : 名詞1 (肌的舊稱) muscle2 [口語] (肌腱或骨頭的韌帶) tendon; sinew 3 [口語] (可以看見的皮下靜...
  • 高強 : excel in; be master of
  • 鋼筋 : concrete iron; concrete reinforcing bars; rebar; reinforcing bar; reinforced bar; reinforcing ste...
  1. To improve the binding strength between the deck slabs and deck surfacing layer of badong changjiang river highway bridge and to provide the surfacing layer with anti - cracking ductility, a series of technical measures has been taken in the construction of the deck surfacing of the bridge, including those of embedding binding reinforcement in the deck slabs, spraying inorganic binding agent between the slabs and layer, replacing part of the cement with micro expansion agent and adding appropriate amount of polypropylene fibers to the concrete

    摘要巴東長江公路大橋橋面鋪裝,通過採取預埋橋面粘接、噴塗無機界面粘結劑、用微膨脹劑替代部分水泥、在混凝土中摻入適量的聚丙烯纖維等措施來提橋面板與鋪裝層間的界面粘結度和給橋面抗裂增韌。
  2. Based on the project imbrued especially by hunan province construction office, the study of this paper includes four parts as follows : the first part does some simplify on the characters of the rc material under high temperature. after transferring the rc section under fire to equivalent one at normal temperature based on the stiffness and intensity equivalent, the rc members under fire can be calculated as ones at normal temperature

    主要研究內容如下: ( 1 )基於剛度等效或度等效原則,根據截面各點材料力學性能的退化,把受火混凝土非均勻截面等效成常溫下的混凝土截面,使得溫下構件剛度和度的計算可按常溫下的計算理論進行。
  3. Here the hsc of sompa is achieved through adding super - effective water reducer, fined slag and silicon fume, and decreasing the water / cement ratio. by varying the area ( spacing ) of tension bars, compressive bars, vertical links and distribution steel and embedding steel fiber and polypropylene fiber we try to improve the behaviors of reinforced high performance concrete one - way spanning slabs in bending, so that its ductility be greater than 5. with the same arrangement of steel the width of bending member is varied to observe the effect of the width / depth ratio on the ultimate compressive strain of concrete

    通過變化受拉率和受壓、箍(鉤、分佈)含量,或摻加纖維使之成為纖維混凝土( sfrhsc )和聚丙烯纖維混凝土( pfrhsc ) ,對混凝土雙截面梁、板的受彎性能進行了試驗研究,試圖改善混凝土受彎構件的延性,使其延性比大於5 ;並在相同配情況下,通過變化截面寬度,研究了混凝土受彎構件的寬比對壓區混凝土極限應變的影響;並對試驗構件的裂縫發展情況進行了觀測。
  4. Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete

    混凝土預加應力用熱軋和熱軋並處理的抗拉度的合金規范
  5. To avoid manual labor of chiseling - grossness, in the area of second - stage concrete construction, permanently non - removed metal molding boards nets are used as molding boards of first - stage concrete. substitution joints of reinforcing steel bars for traditional electric welding and usage of equipments for joints of reinforcing steel bars efficiently improve strength of junctions and rate of connecting reinforcing steel bars, and safety of construction and stability of quality, and greatly reduce cost. it ' s possible that three gorges project become top - ranking project in the world by study on systems engineering of high - strength concrete construction

    混凝土縫面處理採用壓水流沖毛技術,大大提了施工工效,減少了倉面污染;模板工程大量採用定型模板施工技術,提了壩體混凝土成型質量和工程進度;在二期混凝土施工區域,為免除人工鑿毛勞動度,採用永久性免拆金屬模板網作為一期混凝土模板;連接改進傳統的電焊連接方式,採用大量採用接頭機械連接技術,有效提了接頭度和連接速度,施工安全性大大加,質量穩定性有效提,經濟成本大大降低;三峽二期工程持續度混凝土施工系統工程的研究,使三峽工程成為名符其實的「世界一流工程」成為可能;三峽二期工程混凝土溫控綜合技術的應用,有效降低了壩體混凝土溫度的產生;混凝土表面處理及裂縫處理技術的應用,提了建築物的整體性和耐久性。
  6. Abstract : experimental researches on normal section ultimate fle xural strength of prestressed reverse - rib - slab with excessive steel bar were m ade, and according to chinese norm ( gbj10 - 89 ) and american norm ( aci ) in which s train harmony analysis method was adopted, its ultimate strength was calculated, these make us further realizse the ultimate flexural strength of prestressed r everse - rib - slab with excessive steel bar

    文摘:通過疊合結構中預應力超倒肋薄板正截面極限承載力的試驗研究,分別採用規范gbj10 - 89中的受彎構件、偏心受壓構件的計算公式及美國aci規范中的應變協調分析方法計算了極限承載力,從而更清楚地認識了配有絲的超倒肋板的極限承載力計算問題。
  7. Based on the model experiment of 9 normal - strength concrete specimens and 12 high - strength concrete specimens in this case, the hysteretic property and seismic performance of normal - strength and high - strength concrete frame column are analyzed, and factors that affect the seismic performance of combined torsion member are also studied. in this paper, seismic performances of reinforced concrete members are discussed

    在9根普通混凝土、 12根高強鋼筋混凝土框架柱在雙向壓彎剪反復扭矩復合作用的模型試驗研究的基礎上,對普通和混凝土框架柱的抗震特性和滯回特性進行了分析,研究了各影響因素對混凝土復合受扭構件抗震性能的影響。
  8. Products function : put our “ sun shine ” brand carbon steel fiber evenly seep into concrete to form steel fiber reinforced concrete and it can decrease the thickness of reinforced concrete by half, it not only shorten the project time, save the material and manpower expense, bring distinct economic benefit, but also increase the performance of crack resistance, percussion resistance, tensile strength, bend resistance. scosspr resostamce amd wear resistance of the reinforced base materials. if the weight ratio of 2 % steel fiber seep into the concrete, it can solve the brittleness problem of the concrete, in the condition of 60 % ralative air humidity, after 21days air - dry, even 520 days air - dry, it ' s difficult to find any crack by eyesight, the bend resistance for the steel fiber concrete is 140 times stronger than the concrete without steel fiber, the capability of impact resistance increase 10 times

    產品功能:將本公司「雙興」牌碳纖維系列產品均勻地摻入混凝土中,形成纖維增混凝土,可使工程中混凝土的施工厚度降低一半,不僅縮短了施工工期,節省了材料和人工費用,帶來顯著的經濟效益,且增了基體的抗裂、抗沖擊、抗彎、抗剪、耐磨擦等性能,如摻入本公司2 %纖維的混凝土,不僅解決了混凝土的脆性問題,在空氣相對濕度60 %的條件下風干21天後,甚至在風干520天,肉眼很難發現裂縫,摻入纖維后的增混凝土比不摻纖維的混凝土抗彎度提140倍,耐沖擊荷載提10倍。
  9. Initially all structures were prestressed by high-strength bars.

    起初,每個橋梁都是通過高強鋼筋施加預應力的。
  10. Experimental study on the bending behavior of reinforced concrete slabs strengthened by using high - strength steel - wire mesh and polymer morter

    絞線網聚合物砂漿加固混凝土板抗彎試驗研究
  11. Pk prestressed composite slab is a new composite floor structure by improving the traditional prestressed composite slab, its precast slab is a prestressed ribbed panel of which prestressed steel is a spiral ribbed high - strength wire, which make the precast component a higher stiffness and buckling capacity

    本文研究的pk預應力疊合樓板是通過不斷改進傳統預應力疊合板后研製的一種新型疊合樓板結構,其預制構件為帶肋薄板,預應力採用螺旋肋消除應力絲。
  12. Study on the corrosion test of high strength steel bar in atmosphere

    高強鋼筋在大氣中的腐蝕試驗研究
  13. With the development of modern engineering technology, high - strength rebar and concrete are being used universally, the cross section size of reinforced member is more and more small, and the slenderness ratio is more and more great. this trend extrude the carrying capacity and stability of reinforced concrete member obviously

    隨著技術的發展,高強鋼筋混凝土在建築工程中的應用日益普遍,混凝土構件的截面尺寸越來越小,長細比越來越大,這一發展趨勢使得混凝土柱的承載力和穩定問題愈發地突出。
  14. With the improvement in prestressing tendon strength, variations in deformation patterns of rebars, and the necessity of bond deterioration in earthquake - resistant designs, the bond anchorage between reinforcement and concrete has become an increasingly acute issue

    摘要隨著預應力度的提外形的變化,加之抗震設計必須考慮的黏結退化,與混凝土之間的黏結錨固問題愈顯突出。
  15. Experimental results indicated that the polypropylene fiber can improve the workability of concrete availably, and can increase the presentation quality of structures with the voids and pits decreased ; the cracks of beam are controlled effectively, the width and length of crack decreased, the dispersibility of crack in beam face improved, and the ductility of beam increased ; and the cracking load of reinforced concrete beam is increased, the amplify up to about 30 %, simultaneity the ultimate bear capacity increased

    試驗研究表明,使用聚丙烯纖維后,能有效改善新拌混凝土的和易性,並能增混凝土構件的外觀質量,減少構件表面蜂窩、麻面、氣孔、細小裂紋等;同時,在破壞試驗過程中發現梁的裂縫能得到有效控制,裂縫寬度減小,裂縫的發展度降低,裂縫的條數增加,提了梁截面的裂縫分散能力,增了梁中混凝土的韌性;提混凝土梁的開裂荷載,幅度可達30左右,增了結構的延性,提了結構的抗裂性能和屈服荷載。
  16. Finite element analysis of crack characteristics of high - strength reinforced concrete beams

    高強鋼筋混凝土梁裂縫性能有限元分析
  17. An innovative strengthening scheme for reinforced concrete space beam - column joints using high strength steel wire mesh and polymer mortar jacket was proposed, and the quasi - static tests of three reinforced concrete beam - column joints with floor slab and transverse beams were performed to verify the efficiency of the strengthening scheme

    摘要提出了採用新技術絞線網片聚合物砂漿加固技術提混凝土空間框架節點抗震性能的方法,並通過3個帶有直交梁和樓板的空間框架節點試件的低周反復加載試驗對該加固方法進行了檢驗。
  18. The paper has concluded the fundamental principle of sticking reinforcement. that is to improve the ultimate flexural capacity of the original reinforced concrete beam through externally bonded with high - strength tension materials

    本文總結出粘貼加固的基本原理:通過粘貼的抗拉材料,進而使得受彎構件的受壓區混凝土度增加,從而提混凝土受彎構件的正截面承載力。
  19. Also the failure modes and the cracking torque, original stiffness, ultimate torsion strength and ductility are discussed in this case. the factors affected torsion bearing capacity of high - strength concrete frame column is analyzed too. the seismic performances of normal - strength and high - strength concrete frame column subjected to biaxial eccentric compression, shear and reversed torque are studied

    以軸壓比和相對偏心距為主要研究參數,揭示高強鋼筋混凝土構件在單向、雙向偏壓剪單調、反復扭矩作用下的破壞特徵、開裂扭矩、剛度、度、延性等特性,分析了影響混凝土框架柱抗扭承載力的因素。
  20. By model experimentation of 14 high - strength concrete frame columns subjected to axial eccentric compression, shear and humdrum torque, of 9 high - strength concrete and 3 high - performance concrete frame columns subjected to biaxial eccentric compression, shear and reversed torque, the behavior of high - strength concrete frame column in warped section are studied the first time, and the mechanism of torsion bearing capacity of high - strength concrete frame column are discussed

    通過14根承受單向壓、彎、剪,單調扭矩復合作用的高強鋼筋混凝土構件和9根混凝土、 3根性能混凝土框架柱在雙向壓彎剪反復扭矩復合作用的模型試驗研究,首次研究了混凝土框架柱在翹曲截面上的受力行為,探討了混凝土框架柱抗扭性能的受力機理。
分享友人