electron microstructure 中文意思是什麼

electron microstructure 解釋
電子顯微組織
  • electron : n. 【物理學】電子。 the electron beam 電子束。 the electron theory 電子（學）說。
  • microstructure : n. 顯微結構，微觀結構〈如金屬或合金放在顯微鏡下所看到的結構〉。
  1. Equal channel angular processing of the pearlitic steel ( 0. 65 wt. % c ) was successfully carried out at 650 with route c in this study, obtaining a total equivalent true strain ~ 5. the microstructure evolution of pearlitic steel in ecap was investigated by means of transmission electron microscope and scanning electron microscope. the main results are as the following : 1

    本研究成功地實現了c方式650珠光體鋼65mnecap變形，累積等效真應變達到5 。並用透射電鏡、掃描電鏡研究了珠光體組織的演變特點和滲碳體的變形。主要結果如下： 1
  2. The diffusion welding behavior of single - crystalline cu to single - crystalline - aio with a nb film interlayer and the joint microstructure properties were studied by tem, sem / eds analyses and four - point bend testing. the nb film interlayer deposited by electron beam evaporation on the ceramic side prior to diffusion welding was found to be olycrytalline and fiber - textured after diffusion bonding, with the close - packed plane ( 110 ) being parallel to the ( 0001 ) basal plane of - aio

    擴散連接技術是一門邊緣科學，涉及材料、擴散、相變、界面反應、接頭應力應變等各種行為，工藝參數多，雖然已經進行了大量的試驗研究，但卻對各種材料的連接機理尚未有明確的認識，為此人們試圖藉助于計算技術，對接頭行為進行數值模擬，以便找到共同規律，對擴散連接過程及質量進行預測與實時控制。
  3. In allusion to some types of the functional fibre s performances and characters the paper mainly has this fibres microstructure scanned by electron microscrope. in addition we also discuss their differences of microstructure eroded by the plasm. meanwhile by performing mechanics analysis we get theoretical analysis of their space - conglomerating structure. finally we perform analysis of the ultraviolet radiation and analysis of the caloricr weightlessness. as a result these types of fibre not only keep their own fine traits, but also own good conglomerating structure, crystal limit, calorifics performance and mechanics performance. compared with the ordinary fiber, the neatness of high - contracted polyester fiber increases and it s diameter also increases. there are bubbles in the burning - resisting viscose fiber and it has smooth vertical structure

    對應子高收縮的滌綸纖維的平整度有所提高，有較普通纖維變粗的趨勢；在難燃粘膠纖維裏面有氣泡，其具有較明顯的光滑平整縱向結構；滌綸系列棉纖維，在其耐刻蝕方面是比較強的，僅有均勻的小部分刻蝕現象；抗菌衛生級粘膠纖維的刻蝕效果是較差的：難燃的粘膠纖維，刻蝕的效果最好；而抗紫外粘膠纖維刻蝕的效果略有遜色。
  4. Optical microscopy and electron microscopy were employed to study the microstructure and ultrastructure of the leaves of low temperature germplasm and measure or count the lengths of diachyma cells, number of diachyma cells per unit leaf area, chloroplast number per diachyma cell, the number of diachyma cell layers and the number of granum lamella of low - temperature wheat germplasm

    應用光學顯微鏡和電子顯微鏡研究了小麥低溫種質葉片顯微和超微結構，測量統計了葉肉細胞長度、單位面積葉肉細胞數目、單個葉肉細胞中的葉綠體數目、葉肉細胞層數和葉綠體基粒片層數。
  5. With the aid of stereo microscope, optical microscope and scanning electron microscope, the periduim, spore and capillitium of all 8 species of myxomycetes, including field collections and agar - development fruiting, were observed and compared from apparent morphology, microstructure to ultra - structure

    應用實體顯微鏡、光學顯微鏡和掃描電子顯微鏡，對培養的子實體和野生型子實體的囊被、孢子和孢絲等進行了一般和超微觀察及比較研究。
  6. The microstructure evolution of ferrite and pearlite in ecap was investigated by means of optical m icroscopy ( om ) and transmission electron microscopy ( tem )

    並運用光學顯微鏡（ om ） 、透射電子顯微鏡（ tem ）及維氏顯微硬度儀研究了ecap變形后45鋼中先共析鐵素體及珠光體組織的演變特徵。
  7. Calculated the open pore rate, porosity and average leaching time. photomicrograph of representative porous microstructure of matrix were taken by scanning electron microscope ( sem )

    計算平均開孔率、空隙率、氯化鈉瀝清時間，並進行支架表面與內部孔徑和空隙開放情況的掃描電鏡觀察。
  8. The article primarily described the preparation technology and function token of ceramic fiber composite microporous membrane. which main include : the choices of ceramic fiber, the preparation and dispersion of ceramic fiber which the rato of long path can be controlled, preparation technology and function of the microporous ceramic support, the chemistry constitutes of the ceramics fiber composite membrane and the influence of the every kind of factor on the membrane function, the vacuum forming technology of ceramics fiber composite and the influence of the every kind of factor on the membrane function, and the microstructure of the ceramics fiber composite microporous membrane was analysised by the scanning electron microscope ( sem )

    本文主要描述了陶瓷纖維復合微濾膜的制備工藝及性能表徵，其中主要包括：陶瓷纖維的選擇、可控長徑比的陶瓷纖維制備及分散工藝、陶瓷纖維膜支撐體的制備、膜組分配方及各組分配比對材料性能的影響、陶瓷纖維膜的真空抽濾成型工藝及各工藝參數對膜材料性能的影響等，並對陶瓷纖維復合微濾膜的顯微結構進行了掃描電鏡分析。
  9. By analyzing the microstructure of as - cast alloys with different surplus of samarium added, the optimum surplus of samarium is decided. by comparing the microstructure of the alloys annealed for different time, the ideal and economical annealing time is confirmed. the microstructure and phase composition of alloys during the whole preparation of sm2fe17nx are analyzed using the scanning electron micrograph with energy - dispersive x - ray analysis and x - ray diffraction patterns

    本論文首先就熔煉工藝參數對鑄態組織微結構的影響進行了探討，並制定出一套較為合適的熔煉工藝；通過對不同釤加入量的鑄態組織微觀結構的觀察分析，確定了原料配置過程中釤的最佳補償量；通過對採用不同退火時間的合金組織進行比較，確定了理想、經濟的退火時間；同時還利用掃描電子顯微圖像和x射線衍射圖譜，比較了整個制備過程中，試樣微結構和相組成的變化情況。
  10. Finally build the foundation to prepare the composites of structure and m - type ferrite with structure and function properties. the constituent phases, microstructure and crystal dimension and crystal coalescence, mechanical properties, magnetic properties of the composites were investigated by means of x - ray diffraction ( xrd ), scanning electron micrograp h ( sem ) and transmission electron micrograph ( tem ), mechanical testing instrument, vibrating sample magnetometer ( vsm ) respectively

    採用xrd技術鑒定復合材料的物相，利用sem ， tem來分析srfe12o19及其復合材料的結構形貌，顆粒大小及結合情況，使用伺服材料實驗機、洛氏硬度計及振動樣品磁強計（ vsm ）測試了復合陶瓷的抗彎強度、硬度及其磁性能，並探討它們之間關系。
  11. Study on characterization of microstructure of hydrophobically associating water - soluble polymer in aqueous media by scanning electron microscopy and environmental scanning electron microscopy

    疏水締合水溶性聚丙烯酰胺的溶液結構的研究
  12. Using the technology of environmental scanning electron microscope, the microstructure of rpc was preliminarily studied to analyze the reasons for the difference of mechanics performance in the different curing conditions

    利用環境掃描電子顯微鏡（ esem ）技術，對rpc200的微觀結構進行了初步研究，分析rpc200在不同養護方法下力學性能產生差異的原因。
  13. The microstructure of ceramic tiles undergoing different temperatures in fire scene was analyzed using scanning electron microscope ( sem )

    摘要應用掃描電子顯微鏡對經歷不同火場溫度和冷卻方式的釉面內墻磚的顯微結構進行了觀察和分析。
  14. By vacuum - electron - beam weld of ti3al and tc11 the technology of hot die forging, and then use different heat treatments, study the influence law of the different degree of deform, different heat treatments to the microstructure and properties

    採用熱模鍛技術，通過對tac - 1b 、 tc11進行不同程度的變形、真空電子束焊接，然後採用不同的熱處理工藝，研究熱加工工藝對合金組織，性能的影響規律。
  15. Therefore, in order to understand the long - time performance of the weld, it is necessary to study the welding interface of niobium alloy and stainless steel, and know the microstructure evaluation. explosive welding and vacuum electron beam self - material brazing were used to prepare the specimen

    因此，研究鈮合金與不銹鋼的焊接結合層，分析形成的互擴散層的組織、成分和性能變化，對了解不銹鋼和nb合金的互擴散反應行為，焊接件的焊接工藝改進和長期使用性能的評估是很有意義的。
  16. The explosive welding specimen were also annealed in vacuum at various elevated temperature from 1000 to 1300. optic microscope, sem, tem and eds ( electron diffraction scattering ) techniques are applied to observe the microstructure and the element profiles of the welding interface and the interdiffused layer, reveal the interdiffused performance of alloy elements at elevated temperature, and analyze the structure and composition of the precipitated phases. moreover, the tensile strength of welding line with the two different techniques and various welding parameters were carried out

    採用金相、掃描電鏡、透射電鏡、能譜等多種實驗手段對焊接結合層的微觀組織結構、高溫下nb - 1zr與不銹鋼合金元素的互擴散行為，形成的互擴散層的成分、金相組織和擴散層中的析出相的相組成和相結構等，都進行了較為詳細的分析，並且對在不同工藝、不同焊接參數下焊接的nb - 1zr合金和不銹鋼的焊縫做了強度實驗研究。
  17. Microstructural change and thermal shock performance of metal / ceramic graded thermal barrier coatings in thermal shock experiments were studied by scanning electron microscope and energy - dispersive spectrometry. the results showed : 1 ) metal microstructure kept intact while ceramic microstructure had been destroyed ; 2 ) thermal shock performance of coatings was interrelated with its function to relax residual stresses, therefore thermal shock performance of gradient thermal barrier coatings was better than that of terraced thermal barrier coatings ; 3 ) thermal shock performance was concerned with metal content in metal / ceramic thermal barrier coatings, which would be improved when metal content was increased

    利用掃描電子顯微鏡和能譜成分分析技術研究了金屬/陶瓷梯度熱障塗層在熱震過程中的顯微組織變化及其抗熱震性能.結果表明： 1 ）金屬顯微組織保持完好，陶瓷顯微組織有明顯的破壞； 2 ）塗層抗熱震性能與其熱應力緩和功能密切相關，梯度熱障塗層比階梯熱障塗層具有更高的抗熱震性能； 3 ）金屬/陶瓷熱障塗層抗熱震性能與其中金屬相含量有關，金屬相含量增加可改善塗層抗熱震性能
  18. The scanning electron micrographs and the data of pore structure of gypsum and gypsum with the retarders also make us known the influence of retarders on the crystal morphology and pore structure, from which transformation of microstructure induced by retarders and the reason of which makes the strength drop a re analyzed. combined with the xps spectrum, the mechanism of action with the retarders are finally proposed

    繼而通過對孔結構和石膏硬化體晶體掃描電鏡照片的觀測，獲得緩凝劑對石膏硬化體晶體形貌的影響和對孔結構的改變的信息，分析緩凝劑的帶來石膏的微結構的變化，以及摻加緩凝劑帶來石膏強度下降的原因所在。
  19. Some respects of self - compacting high - strength concrete ( schsc ) made of fujian province ' s local material have been studied in this thesis as follows : 1. studies on microstructure of the schsc. three different mixed schsc and one normal high - strength concrete ( nhsc ) were observed by the scanning electron microscope at different sites and different ages of 1 day, 3 days, 7 days, 28 days and 60 days. from the test, the effects due to no vibrating and admixture on the microstructure of schsc were studied

    通過四組強度等級相當，分別為普通混凝土、兩組不摻膨脹劑的自密實混凝土（其粉煤灰的摻量不同）和摻有膨脹劑的自密實混凝土，在同一養護齡期的條件下（ 1天、 3天、 7天、 28天和60天） ，分別選擇粗骨料過渡區、細骨料過渡區、水泥石和砂坑作為觀測點，採用sem進行細觀掃描對比實驗，以研究自密實混凝土因免振搗的特性及摻合料對其骨料界面和水泥石結構的影響。
  20. It is proved by the intensity experiment of welding line that the welds of these two materials using explosive welding and vacuum electron beam self - material brazing are tolerable, nevertheless the welding technique could be improved basing on the study of microstructure of the joint layer

    通過強度實驗的研究，兩種工藝形成的焊縫強度都是可以滿足目前的應用要求的，但是，對電子束自釬焊可根據顯微研究的結果做進一步的工藝參數的改進。
分享友人
分享到 Line

分享到臉書