established frequency 中文意思是什麼

established frequency 解釋
穩定頻率
  • established : adj. 1. 被設立的；確定的；被制定的；被認定了的；既定的。2. 國定的。3. 【植物；植物學】移植生長的。
  • frequency : n. 1. 屢次，頻仍，頻繁。2. （脈搏等的）次數，出現率；頻度；【物理學】頻率，周率。
  1. By making some assumptions, collision frequency were presented. then the the flocculation kinetics model was established through population balance equation. comparison of experimental data and modeling results indicate that there are the same trend between the two. so the model can predict floes number and size during flocculation of yellow river ' s loess particles without using empirical parameters. the tem and sem were used to obsever floes in the study of floe structure. the flocculation was divided as flocculi, floc and floe aggregate. the floes structure model was established by assumption that particles position in floe accords with tetrahedron. the fractal dimension of model and experimental floes was found to be coincidentso the model can reflect the structure of flocs formed in flocculation of yellow river ' s loess particles by macromolecule flocculant at a certain extent

    最後，本文還對絮凝動力學和絮體結構進行了研究，在前人研究的基礎上，針對高分子絮凝黃河泥沙，對絮凝過程作了一些符合試驗條件的假設，建立了顆粒碰撞頻率表達式，應用了顆粒數量平衡方程，從而建立了絮凝過程的動力學生長模型，模型計算結果與試驗數據對比表明，二者趨勢一致，在沒有使用經驗參數的情況下基本上能夠描述黃河泥沙絮凝過程中絮體數量和尺寸分佈的變化過程；對絮體結構的研究中，應用掃描電子顯微鏡和透射電子顯微鏡對絮體進行了觀察，將絮體分為絮粒、絮團和絮網三個不同的生長階段，通過假設顆粒結合位置符西安建築科技大學博士學位論文合正四面體，建立了絮體結構模型，計算得到的模型絮體分形維數基本與試驗中的實際絮體相符，在一定程度上能夠反映高分子絮凝黃河泥沙生成的絮體結構。
  2. There are the production lines established of intermediate - frequency melting, silicasol shuck, precision casting and metal ceramic, and 250 universal devices suck asvacuum melting electric furnaces, high - temperature and intermediate - temperature heat treatment electric furnaces, digitai - control lathes, milling and drilling machines, coreless millers, spherical surface millers, standing milling machines and so on, lt has established the central measuring roomm physicallab, chemical lab, metallic phase lab, crack detection test lab, seat ring lab, rocker lab and ducgt trestle lab, our esported gas engine valve seat to america was rewarded the second prize in terms of sichuan high - quality product

    建有中頻熔煉真空熔煉硅膠溶模精密鑄造粉末冶金生產線。有中頻電爐真空熔練電爐高中溫熱處理電爐數控車床鉆銑床無芯磨外園磨立磨等通用設備250臺套。有中心計量室物理化學金相探傷檢測及座圈搖臂導管臺架實驗室。
  3. According to experimental data and related standard, the finite element model of frame has been set based on its geometric model through simplified processing, selecting element, dividing mesh grids, load cases setting and putting characteristic etc. on the basis of this, the integrated finite element model of motorcycle has been established including frame, engine, suspension, wheel, rider and oil box etc. to understand the relationship and dynamic property of frame and integrated motorcycle, mode analysis and frequency response analysis have been done

    根據實驗測試數據和有關標準規范，以總體設計階段得出的車架幾何模型為基礎，通過模型簡化、單元類型確定、網格劃分、工況設置、邊界處理、物理特性賦予等，建立車架的有限元模型。並基於此，建立整車的有限元模型，包括車架、發動機、懸架、輪胎、乘員、油箱等。
  4. Shortwave channel is time varying transmission channel. it has dispersion in frequency and time domains. this characteristics hinds the data transmi - ssion at high speed and the correction of received data. in this dissertation i have analyzed the statistic characteristic of shortwa - ve channel, established the model of shortwave channel and simulated the rayl eigh fading distribution. the technology of spreading spetrum has been proved that it has the capability for anti - multipath and discerning multipath

    在短波通信中，由於通道的時間色散和頻率色散，引起多徑展寬和多徑衰落，前者限制了數據的傳輸速率，後者造成短波數據通信中出現突發錯誤，為了解決多徑效應對短波通信的影響，本文所做工作如下：首先詳細分析了短波通道的統計特性，建立其數學模型；其次分析了擴頻通信的特點，從理論上證明擴頻技術不僅具有抗多徑干擾能力，而且具有分離多徑的能力；介紹了傳統的rake分集合併技術的特點。
  5. The key components in laser gyro is he - ne ring laser, and the reciprocal action theory between light and medium is the base in studying the ring laser, use the lamb half classical theory, and on the base of density matrix theory, the optical brounch equation was established, which described the movement of amplifying medium atom in the ring syntonic cavity, and according to the medium polarize theory the self consistent equations was deduced, which describe the light intensity and phasic of the counter - propagating wave. on the basis of this equations, adopted the simulation software matlab and virtual instrument programming language labwindows / cvi, we can do some simulated experiments in study the phenomenas such as amplify and dispersive characteristic of medium, mode pushing effection, burned hole effection and pattern competition, lock - in of frequency and the characteristic of light intensity and phasic of the counter - propagating wave in laser gyro

    激光陀螺的核心部件為he - ne環形激光器，而掌握光與介質的相互作用理論是研究激光器的關鍵，採用拉姆半經典理論為主，在密度矩陣理論的基礎上，推導環形諧振腔中描述he - ne氣體增益介質原子運動的光學布洛赫方程，運用介質極化理論得出描述激光陀螺反向行波的光強、位相所滿足的自洽場方程組，在此基礎上，運用matlab模擬軟體和虛擬儀器編程語言labwindows / cvi ，對激光陀螺中的介質增益色散特性、頻率牽引效應、燒孔效應及模競爭、閉鎖效應及環激光的光強和相位特性進行模擬試驗研究，並且運用全量子理論，對激光工作原理進行分析，得出二能級系統單模輻射場的光子數密度分佈，得出激光場的光子統計分佈，模擬激光場的動態建立過程。
  6. Our factory is established in 2004, the existing staff 80 people, workshop area 2000m2, has the production assembly line 3 and thespectrometer, the oscilloscope, the high frequency signal generator, leaks the reflectoscope reflector, the pressure resistancereflectoscope reflector, the overflow welding machine, production, thecheck - out facility and so on led lamps and lanterns simulationreflectoscope reflector

    我們廠成立於2004年，現有員工80餘人，廠房面積2000m2 ，擁有生產流水線3條及頻譜儀、示波器、高頻信號發生器、漏電測試儀、耐壓測試儀、溢流焊機、 led燈具模擬測試儀等生產、檢測設備。
  7. However, genetic improvement by in vitro culture in mustard ( brassica juncea coss. ), especially in chinese mustard, is restricted by the poor frequency of shoot regeneration, and no regeneration system is established yet

    芥菜類作物（尤其是中國芥菜）再生率偏低，在遺傳轉化、突變體篩選等方面尚未形成一個高效穩定的再生體系，從而制約了離體條件下遺傳改良的進程。
  8. It makes the deduction on design tidal level process more reasonable than ever. finally, taking into account the observed data of tidal level are much more integrated than observed data of tidal discharge and the correlative relationship are established based on large numbers of samples. then, the sub stage maximum tidal discharges and tidal velocities are obtained according to the regressive equations and the observed tidal level, and the sub stage design maximum tidal discharges and tidal velocities are estimated by way of frequency analysis

    最後，針對橋位河段實測潮流資料短缺而潮位資料相對完整的實際情況，基於大量樣本建立了潮流量與潮汐要素的相關關系，利用實測長系列潮位資料得到分期最大潮流量、潮流速系列，經頻率分析確定了分期設計最大潮流量、潮流速。
  9. The temperature range is - 30 ~ 80. the topology of the step - up dc / dc converters and its basic principle is first analyzed in this thesis. then based on the conventional pfm control scheme, a discrete pulse frequency modulation is presented and the state space average model related to the ccm ( continue current mode ) and dcm is established

    然後在傳統的脈沖頻率調制方式的基礎上，分析了一種離散脈沖頻率調制方式，並建立了這種調制方式下升壓型dc / dc變換器在電流連續（ ccm ）工作模式和電流斷續（ dcm ）工作模式的狀態空間平均模型。
  10. The form display in chinese and can be operated easily. i has done the following works : ( 1 ) have innovated a computer control system of double - side automatic tig erect welding of aluminium alloy ; ( 2 ) analysed the key technics of the control system completely ; ( 3 ) designed the computer control system ; ( 4 ) solved some possible existing craftwork problems when welding the aliminium alloys ; ( 5 ) solved the existing problems of erect welding such as gravity ; ( 6 ) by the designing of hardware and software, the paper has solved the problem of high frequency interference to the computer control system, such makes the system work steadily ; ( 7 ) established the mode of imitating the dynamic process of welding

    本文主要在如下幾個方面做了一些工作： （ 1 ）本文創新性地設計了鋁合金雙面自動tig立焊計算機控制系統（ 2 ）全面地分析了控制系統實施過程中的關鍵技術； （ 3 ）微機控制系統的設計； （ 4 ）解決鋁合金在自動焊接過程中工藝上可能存在的問題； （ 5 ）解決立焊工藝中由於重力等導致的問題； （ 6 ）通過硬體和軟體的設計，克服高頻干擾，從而確保控制系統的可靠性； （ 7 ）設計的控制系統可以完成定位焊接，自動焊接和模擬焊接； （ 8 ）焊接動態過程的辯識建模及系統模擬。
  11. This paper conbined with the indoor test and the scene test road, through the synthetical analysis of the factors of influencing densification effect for the densification thickness of filling stone roadbed. the maximum grain size of fill material, densification machinery and densification frequency et al. advanced a control norm of the maximum grain size and piy of compression, established ration evaluating the control standard of densification quality of filling stone roadbed under overload. comparing with result of indoor test and the scene test road, studied on theory of densification in different kinds of stone material and perfected the control system of the densification of filling stone roadbed under overload

    結合室內試驗和現場試驗路的實測數據，通過對填石路基的壓實厚度，填料最大粒徑，壓實機械及壓實遍數等影響壓實效果的因素的綜合分析，提出填石路基的最大粒徑和攤鋪厚度的控制指標，建立定量評定超重載交通下填石路基壓實質量的控制標準，並對照室內試驗和現場試驗結果，研究不同石料條件下的壓實理論，補充完善了填石路基壓實控制指標體系。
  12. Located in shangxi town of yiwu city, is a pvc blowing toys handbags factory with a large scale founded in 1985, it enjoys 16 - year s history, the factory covers an area of 11000 sq. m including huangshan development zone, owns 130 sets of large, medium small high - frequency heat - combining machines which form the firstclass printing production line in the same line. moreover, there are more than 200 skilled workers and a group of technicians with many years experience of production and ad - ministration served in factory. our factory has set up a good market image and established excellent brand reputation in passed years

    始建於1985年，至今已有16年的歷史。本廠佔地面積約11000平方米含黃山開發區。有大中小高頻熱合機130臺，在同行是一流印花生產線， 200多名熟練生產工人和一批具有多年生產製造管理經驗的專業人士，多年來我廠樹立了良好的市場形象，並建立了良好的品牌信譽。
  13. The method of applying frequency analysis theory is proposed to resolve the problem of ship motion. the mathematic models of ship - based missile in launch period are established. these models consist of relative motion in launch - fixed coordinate and absolute motion in earth - fixed coordinate

    採用了動靜法的描述形式建立了艦載導彈在發射段的數學模型，分別給出了導彈相對發射坐標系的相對運動模型和導彈在地面坐標系下的絕對運動模型。
  14. By using single strand conformation polymorphism analysis of polymerase chain reaction ( pcr - sscp ), the frequency of codon 54 mutant allele of mbl structural gene in the population of hans was investigated. 3. the molecular beacon ( mb ) hybridization technique with visual monitoring was established

    建立聚合酶鏈反應單鏈構象多態性分析inglestrandconforma tlonpolymorphlsmanalysisofpol仰erasechainreactionproduction ， pcr sscp ）方法，初步調查漢族人群mbl基因ggc54gac突變情況。
  15. 4. after having established genetic transformation system with tomato cotyledons as explant and determined the transformable of preculture time, incubation time and co - culture time, we set up the system of high frequency transformation of tomato cotyledons. then hbmp - 3m gene was transferred into tomato via agrobacterium - mqdiated transformation, and the resistant plants to hyg were obtained. by pcr analysis on part of the putative transformants, we identified that hbmp - 3m gene had been integrated into the genome of part of tomato plants. 5. transferred hbmp - 3 gene into tobacco via agrobacterium - mediated transformation and obtained the resistant plants to hyg. trans genie tobacco plants were confirmed by instantaneous expression of gus gene in calli detection, growth and bio - morphology analysis, hyg - resistant experiment and pcr analysis

    通過pcr檢測證實部分番茄抗性植株中已導入hbmp - 3m基因；人骨形成蛋白一3成熟膚基因和全長基因分別轉化番茄和煙草的研究5 .通過農桿菌介導法將hbmp一3全長基因導入煙草，並且獲得了hyg抗性植株，通過gus基因瞬時表達檢測、轉化植株的生長情況及形態學分析、 hyg抗性鑒定及pc尺檢測，證明目的基因己經整合到煙草基因組中。
  16. In pursuing their agendas for reducing market uncertainty, or simple for locking trading partners into trading relationships with them, these powerful players have unilaterally imposed their own in - house computer systems or information handling practices upon their trading partners, extending their own hardware systems into their suppliers ' premises, dictating product and inventory coding according to their own established in - house information systems, and dictating the type and frequency of data to be exchanged

    議程的進行是為了要減少市場的不確定性，或是單純的為了綁住貿易伴與他們有著貿易的關系，這些強勢的一方已經單方面的利用本身的電腦系統或是資訊管理運用在他們的貿易伴上，擴展他們本身的硬體系統進入他們的供應者經營場所，根據他們本身建立的資訊系統指定產品和存貨條碼，以及指定資料的形式和頻率進行交易。
  17. The paper has done all - around study on the ac excited of variable - speed constant - frequency ( vscf ) wind power generation. the author has done thorough study on the vscf wind power generation technology using wound - rotor doubly - fed induction generator, from simulation to experiment, from theory to practice. he also did at large theory analysis to the vscf wind power generation technology using cascaded brushless doubly - fed generator, and has established stability theoretical foundation for continue study work

    本文對交流勵磁變速恆頻風力發電領域的關鍵技術進行了較為全面的從模擬到實驗、從理論到實踐的深入研究，同時對具有廣泛潛在應用前景的級聯式無刷雙饋發電機變速恆頻風力發電技術也進行了洋盡地理論分析，為今後進一步的深入研究奠定了一定的理論基礎。
  18. In the present works, a self - consistent model describing the dynamics of radio - frequency ( rf ) sheath was established. the effects of collisions on the rf sheath dynamics, distributions of ion energy and angle incident on the substrate and the etching profiles were investigated numerically

    本文建立了一套自洽的碰撞射頻等離子體鞘層理論模型，系統地研究了碰撞效應對等離子體鞘層的物理特性、離子入射到基板上的能量分佈和角度分佈以及刻蝕剖面的影響。
  19. The study has completed the design of two - phase inverter and made up of the two - phase inverter - motor system for experimental use it is a variable frequency adjustable speed system with a open - loop control of rotational speed, which consists of voltage - controlled oscillator circulating assign device inverter circuit and two - phase induction motor a accurate mathematical model is set based on the whole system, and simulator program of dynamic and steady condition is established, which is used to calculate the dynamic and steady performance by kron and symmetrical coordinate converter by simulator calculation and experimental research with specific parameter of the system, a comparison is made between predicted and experimental characteristics, experimental measurements are shown to compare closely with corresponding theoretical result it is compared with some variable frequency adjus table speed system comprising inverter and single - phase induction motor from the system efficiency torque pulsation and the effect of two - phase inverter capacitance based on the conclusion, harmonic cancellation pulse width modulation control of a two - phase inverter - fed induction - motor drive system is researched, which cancelled the low harmonic and improve the system performance

    通過對電機的kron變換和對稱分量變換，建立了系統較精確的數學模型，編制了系統動態及穩態運行的模擬計算程序分別計算系統的動態和穩態性能。通過對系統的具體參數進行了模擬運算和實驗研究，實驗和模擬結果進行比較，說明實驗和理論較為一致，並從系統效率、轉矩脈動及兩相逆變器電容的影響等方面與各種逆變器和單相異步電動機組成的變頻調速系統加以比較。在此基礎上，對兩相逆變器供電-異步電動機系統使用諧波抑制pwm控制進行了研究，由於減少了低次諧波，改善了系統性能。
  20. Finally, in consideration of the characteristics of the differential balance mechanism, a more accurate virtual prototype of the mechanism is established and the simulation is carried out in the software environment of adams. the angular velocity curves of the relevant parts and the natural frequency of the mechanism are got. the results may be helpful to the improvement and the application of the mechanism

    最後，綜合考慮了輪齒嚙合剛度、搖臂軸扭轉柔性及齒輪傳動回差對差動平衡機構的影響，建立了能夠比較完整地反映該機構動態特性的虛擬樣機模型;在adams軟體環境下，對差動平衡機構的虛擬樣機模型進行了動態模擬，得出了能反映該機構動態特性的關系曲線，並確定了其固有頻率，為該機構的改進及其在月球車上的實際應用提供了參考依據。
分享友人
分享到 Line

分享到臉書