frequency pulse 中文意思是什麼

frequency pulse 解釋
頻率脈沖
  • frequency : n. 1. 屢次，頻仍，頻繁。2. （脈搏等的）次數，出現率；頻度；【物理學】頻率，周率。
  • pulse : n 1 脈搏；有節奏的跳動；【動物；動物學】脈沖（波）；脈動。2 意向；傾向。3 【音樂】拍子，律動。vi ...
  1. A circuit topology of the inverter with duty cycle extended active clamp forward style high frequency pulse dc link is adopted by each independent inverter. each inverter is cascaded by a circuit with duty cycle extended active clamp forward style high frequency pulse dc link and a dc / ac inverting bridge. the control strategy of voltage mode pwm forwardback is adopted by the former, and the control strategy of three - state discrete pulse modulation ( dpm ) hystersis current is adopted by the later

    每個獨立的航空靜止變流器採用占空比擴展有源箝位正激式高頻脈沖直流環節電路拓撲，由占空比擴展有源箝位正激式高頻脈沖直流環節電路與dc ac逆變橋級聯而成，前級採用電壓型pwm前饋控制技術，后級採用三態dpm電流滯環控制技術。
  2. High - frequency pulse lasers with resonance tube ultrasonics

    高頻率的脈沖雷射和超聲波
  3. Multiple functions available ： start / crater arc current, increase / decrease time, base / crest value current, pulse frequency, pulse rate, post flow time, hf welding

    功能豐富：起始/收弧電流、上升/下降時間、基值電流、峰直電流、脈沖頻率、占空比、滯后關氣時間分別可調，高頻引弧。
  4. Multiple funcyions available : start / crater arc current, increase / decrease time, base, crest value current, pulse frequency, pulse rate, post flow time, hf / friction welding, water / gas cooling

    功能豐富：起始/收弧電流、上升/下降時間、基值電流、峰值電流、脈沖頻率、占空比、滯后關氣時間分別可調，高頻/接觸引弧、水冷/氣冷可供選用。
  5. Take integrity of object information into condition, a two - dimension signal processing method which can make a measurement of the target ’ s speed as well as the range is brought forward at the basis of waveform parameter design. and simulation in the background of hf multi - object with noise is taken. a comparison of signal properties, processing and antinoise detection performance is taken between mcpc and another two high range resolution radar signals : single carrier pulse coded signal and step frequency pulse coded signal

    考慮到目標信息提取的相對完整性，以高頻雷達為背景，在對多載波相位編碼脈沖串信號參數設計的基礎上，推導了三種多載頻相位編碼脈沖串信號的距離速度二維處理過程並相應的對多目標噪聲環境進行了模擬;將多載波相位編碼信號與另外兩種距離高分辨信號:單載頻相位編碼信號和相位編碼階梯跳頻信號，在信號特性、處理過程和抗噪聲特性方面進行了對比;本文從理論上為多載波相位編碼信號的波形設計和分析、信號的處理打下基礎。
  6. Abstract : the high - frequency pulse waveform of wedm pulse generator was analyzed. basic condition method is presented the results is well

    文摘:分析了電火花線切割機脈沖電源的高頻脈沖波形，提出了有效的控制方法，獲得了良好的綜合效果。
  7. The variable polarity power supply circuit uses two stages full - bridge inverter, the former inverter is regarded as a constant - current source with fast dynamic response, and supplys energy for the second one, and the latter one is to produce variable polarity current excellently, and low - frequency pulse current by variable polarity power supply is used to reduce input energy and control the shape of weld bead while welding. a series of high - frequency pulse current is superposed on direct - current - electrode - negative ( dcen ) current through the high - frequency pulse power supply, which is used to compress the arc and improve process of crystallization

    其中變極性電源採用二次全橋逆變結構，一次逆變提供快速的響應速率並給二次逆變提供能量，二次逆變提供良好的變極性性能，使輸出能量最優化，並用其低頻電流特性減小電弧線能量，控制焊縫成形;高頻脈沖電源提供的高頻電流疊加在反極性電流dcen上，利用電流的高頻特性壓縮電弧，改善焊縫金屬結晶過程。
  8. The process of designing the high frequency pulse transformer is supplied

    介紹了其中高頻脈沖變壓器的設計。
  9. Development and application of electric dehydration power supply equipment with high frequency pulse

    高頻脈沖原油電脫水供電裝置的研製及應用
  10. A prototype for 3000va 27vdc / 115v400hzac three - phase aviation static inverter with high frequency pulse dc link is designed and successfully developed

    設計、研製成功了3kva27vdc 115v400hzac三相高頻脈沖直流環節航空靜止變流器。
  11. The operation principle of the aviation static inverter with high frequency pulse dc link is discussed, and the design criterions of the key circuit parameters are gained

    本文論述了高頻脈沖直流環節航空靜止變流器的工作原理，獲得了關鍵電路參數設計準則。
  12. The three - phase aviation static inverter with high frequency pulse dc link is made of three independent aviation static inverters and has the advantages such as strong function with unbalanced load and easy realization for module

    三相高頻脈沖直流環節航空靜止變流器由三個獨立的航空靜止變流器構成，具有帶不平衡負載能力強、易於實現模塊化等優點。
  13. The magnetic reset by each pulse is proposed in this paper. that is how to control modulation ratio and let the increase of magnetic flux with each high frequency pulse reset to zero. so it will avoid magnetic flux saturation

    本文採用逐個脈沖磁復位技術，就是在每個高頻脈沖之後及時採取措施，使每一個高頻脈沖引起的磁通增加都回復到零，從而避免磁芯磁通飽和。
  14. In this thesis, a high - frequency variable polarity arc welding power supply was investigated, which consisted of two independent power sources, the variable polarity power supply and the high - frequency pulse one, having advantages both of them

    本文針對鋁合金焊接研製了一種新型電源，所研究的高頻變極性弧焊電源採用雙電源結構，由變極性電源和高頻脈沖電源組成，綜合了兩者的優點。
  15. At last, an experiential power supply was made, and a series of experiments is done. a lot of high - frequency pulse current was superposed on dcen current, modulated the welding current waveform we required and optimized the energy distribution, which satisfied the basic requirement of cathode cleaning

    最後製作了一臺實驗電源，並進行了一系列的電弧實驗，通過在變極性電源電流dcen基礎上疊加一系列脈沖電流，調制出所需電流波形，實現輸出能量的最優分配，在滿足陰極清理的前提下，最大限度地提高焊接效率。
  16. In the work, mid - frequency pulse magnetron sputtering is used to prepare znoral thin films used as the back reflector of the thin silicon films solar cells. the best techological condition was obtained by optimizing the preparing conditions, ( var is decided by the deposition rate, target voltage : 265v, gas pressure : 0. 6pa, the high base vacuum is expected

    本文採用中頻脈沖磁控濺射法，通過優化zno ： al薄膜的制備工藝，如靶電壓、本底真空度、工作氣壓、襯底溫度、 o _ 2 ar ，得到可用於硅薄膜太陽能電池背電極的zno ： al薄膜。
  17. Multi - frequency pulse mfp

    多頻脈沖
  18. The experience results indicated the reliability of this kind of thermostatic control system. the analysis and compare about modern dielectric loss measuring methods are presented on chapter 3, and the zero - crossing testing phase discrimination method is adapted as the measuring method of this measuring system. furthermore, applied high frequency pulse technique, channel self - correction technique, anti - harmonic technique are used to increase accuracy and reliability of measurement

    本文對現代介質損耗測量技術進行了分析與比較，採用過零鑒相比較法作為介質損耗測量方法，並結合外施高頻脈沖技術、通道自校正技術、抗諧波技術，設計了高精度介質損耗測量電路，有效提高了介質損耗測量的精度，減小了測量誤差。
  19. With the small - sized disk saw machine as the research object, and through the analysis of the main sound source and action force of the small - sized disk saw machine, it indicates that the main cutting noise is produced by the local high - frequency pulse vibration of saw blades and workpiece

    以小型圓盤鋸機為研究對象，通過對鋸切過程中主要聲源及受力分析，明確了主要鋸切噪聲是由鋸齒高頻脈沖激勵引起鋸片和工件的局部高頻脈沖振動所產生的。
  20. The different phenomena of ccd < wp = 7 > disturbed by different frequency pulse laser were observed. in experiment a ccd image tracking simulation system was disturbed effectively when tracking target region jammed by laser

    採用脈沖激光實現了對處于相關跟蹤方式下工作的光電探測跟蹤模擬系統的干擾，指出只有對波門內實施有效的干擾才能使相關跟蹤方式失效。
分享友人
分享到 Line

分享到臉書