high heat furnace 中文意思是什麼

high heat furnace 解釋
高溫爐
  • high : adj 1 高的〈指物，形容人的身高用 tall〉；高處的；高地的。2 高級的，高等的，高位的，重要的。3 高尚...
  • heat : n 1 熱；熱力；熱度；熱量。2 體溫；發燒。3 （氣候的）高溫，暑氣。4 【冶金】熔煉的爐次；裝爐量；一...
  • furnace : n. 1. 爐子；熔爐；高爐。2. 極熱的地方。3. 磨煉；艱難。vt. 在爐中燒熱（金屬）。
  1. Aimed at the high temperature at furnace roof and wall, great lost of body heat radiation, poor leading heating ability and long soaking time, the compound ceramic fiber coating is used to hold temperature of furnace roof and wall, make the heating loss dropped, shorten soaking time, improve heating ability and reduce evergy consumption

    摘要針對環形爐爐頂爐墻表面溫度高、爐體散熱損失大、導致加熱能力低、待溫時間偏長的問題，選用了復合陶瓷纖維保溫塗料，使爐體散熱損失減少，待溫時間縮短，加熱能力提高，且能耗降低。
  2. Our company endeavors to quenching & tempering, normalizing, tempering, high and medium temperature quenching, mesh belt furnace quenching, carbonizing, aging subzero and high temperature heat treatment, etc

    本公司是一家致力於從事調質、正火、回火、高中溫淬火、網帶爐淬火、滲碳、時效冰冷及其高溫熱處理的廠家。
  3. The temperature distribution on the high temperature side of an electric tunnel furnace is analysed and simulated on the basis of the principle of thermal radiation by the way of thb ( thermal heat balance ). the heated silicon carbon sticks are decomposed into innumerable tiny heating faces, which exchange the heat with the heated materials. a numerical model based on the radiation intensity law is constructed to calculate the energy absorbed by the heated materials and simulated by a computer. the results showed that the even distribution of temperature can be obtained by optimizing the arrangement of the silicon carbon sticks according to the calculation results to make the structure design more reasonable. these calculation results have been used in the practical designs and the expected objectives achieved

    利用熱輻射原理，採用熱平衡法對電熱隧道窯的高溫恆溫區溫場進行了分析和模擬.計算中將發熱棒分解為無數微元發熱面與燒結體進行熱交換，依據輻射強度定律，建立了燒結體接收能量的數學模型，並用計算機進行了模擬計算.結果表明，依據模擬結果來優化硅碳棒的排布，可使結構設計更加合理，進而可以獲得分佈均勻的恆溫區溫場.計算結果已在窯爐設計中應用，實踐效果良好
  4. Using the opened thermosiphon of 38x3 as experimental element and water as working fluid, the characteristics of dynamic low load boiling, stable severe boiling heat transfer coefficient and critical heat flux are gotten for the opened thermosiphon at the pressure of 0. 02 - 0. 1mpa and 0. 1 - 0. 8mpa respectively, which makes up the drawback that the opened thermisiphon has not yet accurate boiling heat transfer relationship formulas. by means of experimental results, an opened thermisiphon waste heat recovery boiler is designed for the high temperature gases that the positi e electrode copper refining furnace exhaust, which overcomes effectively the drawback of short life, little capacity and unable to inspect that the closed steel - water thermosion has

    本文以工程上常用的38 3的開口封底為實驗元件，以水為工質，對開啟式熱管內的動態低負荷沸騰、穩態旺盛沸騰及臨界沸騰特性進行系統的可視化實驗研究，實驗壓力為0 . 02 0 . 8mpa ，實驗得出了38 3的開口封底管在工作壓力為0 . 02 0 . 8mpa和0 . 1 0 . 8mpa下的管內沸騰傳熱系數及臨界熱負荷計算關聯式，彌補了開口封底管? ?這一新型傳熱元件尚無準確的沸騰換熱關聯式的缺陷。
  5. High temperature resistant measure is taken to extend its service life significantly in comparing with the tube still hot air furnace, whereas, cross brushing of heat sink by the smoke and negative pressure smoke exhaust are used to ensure a clean heat exchanging position with stable thermal performance

    該爐採取了耐高溫措施，從而使其壽命比列管式熱風爐大大延長，並採用了煙氣縱向沖刷散熱片和負壓式排煙方式，換熱部分不積灰塵，無須清理，熱性能穩定。
  6. Etc. heaters mosi2, sic for annealing furnace and single crystal furnace, high purity oxides high purity rear earth oxides, sio2, al2o3, tio2, ti2o3 and ti3o5 etc. for crystal growth and optical coatings. w, mo crucibles and w, mo products for crystal growth, fire - resistant materials and products for heat isolating during crystal growth

    Etc . ，退火爐及單晶爐用發熱體硅化鉬，炭化硅，晶體生長和光學鍍膜用高純氧化物稀土氧化物，二氧化硅，三氧化鋁，二氧化鈦，三氧化二鈦，五氧化三鈦等，生長晶體用鎢鉬坩堝及鎢鉬製品和保溫用各種耐火材料及製品。
  7. The sulfur melting furnace with high temperature heat pipe

    高溫熱管熔硫器
  8. Wear resistant layer of cylinder and double - layer liner in catalyst creaking apparatus ( without or with tortoiseshell net can be used ), inner liner of carbon monoxide exhaust - heat boiler, pouring at site for furnace roof with high temperature of heating furnace of steel rolling, different forging furnace, resistance furnace, the prefabricated parts can also be made

    催化裂化裝置中的筒體耐磨層及雙層襯里， （無龜甲網和有龜甲網均可採用）及一氧化碳余熱鍋爐的內襯，也適用於軋鋼加熱爐、各種煅造爐、電阻爐的爐頂、爐墻、爐底高溫部位的現場澆注，可製成預制構件。
  9. Main products of huayao include ceramic roller kiln, tunnel kiln, glass furnace, metallurgical carbide furnace, baking furnace, coke oven, heat treatment furnace, cement kiln, brick kiln, boiler, crystallite glass kiln, high - temperature shuttle kiln, and etc

    陶瓷輥道窯、隧道窯，玻璃熔窯，冶金碳化爐、焙燒爐、焦爐、熱處理爐，建材水泥窯、磚瓦窯、鍋爐，微晶玻璃窯，高溫抽屜窯等均為拳頭產品。
  10. The material of electro - fused magnesia sinter is selected from special grade a natural magnesite or high - purity caustic calcined magnesite, which is fused in arc furnace to finish the products. the products possess high purity, crystal with and compact texture, have high heat - vibration steady and cinder corrosion resistant, it is used for making high quality magnesite bricks, magnesia - carbon bricks

    電熔鎂砂是用精選的特a級天然菱鎂石，在電弧爐中熔融制得，該產品具有純度高，結晶緻密，抗渣性強熱震穩定性好，是製作高檔鎂磚，鎂碳磚及不定形耐火材料的重要原料。
  11. Abstract : during construction of the capital international airport ' s garage building project, the c50 and over c60 high performance concrete has been adopted for its construction. for the aim of 1, to get a maximum reduction of cement comsumption 2, to lower the concrete ' s hydration heat 3, to reduce concrete ' s shrinkage and cracks, and 4, to promote concrete ' s performance, a high quality chilled blast furnace superfine slag has been adopted as an admixture. furthermore, the adoption of some other minerals as the admixtures to get a high performance concrete has been carried out. as a result, these procedures and operations would have developed considerably the potential activity of concrete, and eventually the multiple performance and multiple function of concrete would have been improved and promoted. in conclusion a good result has been achieved in practice

    文摘:首都國際機場停車樓工程中，採用c50及c60以上高性能混凝土，為最大限度減少水泥用量，降低水化熱，減少收縮與裂縫，提高混凝土的性能，優選了有效成分含量高、質量好的水淬高爐礦渣磨細后單獨摻用，或再與其他礦物組分復合作為高性能混凝土的摻合料，以充分發揮礦渣的潛在活性，從而使混凝土的多項性能得到極大的改善和提高，並在實際應用中取得了良好的效果。
  12. During construction of the capital international airport ' s garage building project, the c50 and over c60 high performance concrete has been adopted for its construction. for the aim of 1, to get a maximum reduction of cement comsumption 2, to lower the concrete ' s hydration heat 3, to reduce concrete ' s shrinkage and cracks, and 4, to promote concrete ' s performance, a high quality chilled blast furnace superfine slag has been adopted as an admixture. furthermore, the adoption of some other minerals as the admixtures to get a high performance concrete has been carried out. as a result, these procedures and operations would have developed considerably the potential activity of concrete, and eventually the multiple performance and multiple function of concrete would have been improved and promoted. in conclusion a good result has been achieved in practice

    首都國際機場停車樓工程中，採用c50及c60以上高性能混凝土，為最大限度減少水泥用量，降低水化熱，減少收縮與裂縫，提高混凝土的性能，優選了有效成分含量高、質量好的水淬高爐礦渣磨細后單獨摻用，或再與其他礦物組分復合作為高性能混凝土的摻合料，以充分發揮礦渣的潛在活性，從而使混凝土的多項性能得到極大的改善和提高，並在實際應用中取得了良好的效果。
  13. Abstract : the in servie tubular heaters built early in refineries and chemical plans have low thermal load and low heat efficiency, therefore measures for technical reform are offered, including ( 1 ) enlarging the surface area of convection tubes to increase the thermal load of rhe convection section ; ( 2 ) increasign the heat interchanging area of radiant tubes ; ( 3 ) changing the height of the chimney ; ( 4 ) using new burner with forced air supply to increase calorific capacityu ; ( 5 ) adding air preheater between the convection section and chimney to enhence the temperature of the air entering the furnace ; ( 6 ) adopting high temperature radiant coating to improve the effect of radiant heat interchanging

    文摘:針對早期建造的煉油廠和化工廠在役管式加熱爐熱負荷和熱效率低的狀況，提出了若干技術改造措施包括，增大對流管表面積以增大對流段的熱負荷；增加輻射管的換熱面積；修正煙囪高度；換用新型燃燒器，變自然通風為強制供風，以增大燃燒器的發熱量，減小過剩空氣系數，節省燃料2 % 3 % ；在對流段和煙囪之間增設空氣預熱器以提高空氣入爐溫度；採用高溫輻射塗料增強輻射換熱效果，從而增加熱源對爐壁的輻射傳熱量和爐管的傳熱量等。
  14. The in servie tubular heaters built early in refineries and chemical plans have low thermal load and low heat efficiency, therefore measures for technical reform are offered, including ( 1 ) enlarging the surface area of convection tubes to increase the thermal load of rhe convection section ; ( 2 ) increasign the heat interchanging area of radiant tubes ; ( 3 ) changing the height of the chimney ; ( 4 ) using new burner with forced air supply to increase calorific capacityu ; ( 5 ) adding air preheater between the convection section and chimney to enhence the temperature of the air entering the furnace ; ( 6 ) adopting high temperature radiant coating to improve the effect of radiant heat interchanging

    針對早期建造的煉油廠和化工廠在役管式加熱爐熱負荷和熱效率低的狀況，提出了若干技術改造措施包括，增大對流管表面積以增大對流段的熱負荷；增加輻射管的換熱面積；修正煙囪高度；換用新型燃燒器，變自然通風為強制供風，以增大燃燒器的發熱量，減小過剩空氣系數，節省燃料2 % 3 % ；在對流段和煙囪之間增設空氣預熱器以提高空氣入爐溫度；採用高溫輻射塗料增強輻射換熱效果，從而增加熱源對爐壁的輻射傳熱量和爐管的傳熱量等。
  15. Foam glass is a new kind of inorganic heat insulating material with a structure of equally closed cells. it is mainly made of glass added with adequate foaming agents after heating and baking in high - temperature tunnel furnace, then annealing and cooling

    泡沫玻璃是一種以玻璃為主要原料，摻入適量發泡劑，通過高溫遂道窯爐加熱焙燒和退火冷卻加工處理后制得，具有均勻的獨立密閉氣隙結構的新型無機絕熱材料。
  16. The important significance of industrial furnace using infrared radiant material was analyzed through radiant heat transfer enhanced in industrial furnace with high temperature

    摘要從高溫工業爐強化爐內輻射傳熱過程的角度出發，分析了工業爐應用紅外輻射材料的重要意義。
  17. Combining burning and heat exchange as a whole, this furnace adopts the novel indirect heating technology of performing heat exchange at high temperature position of the furnace, inside which, smoke and air flow separately, heating has no contamination, thermal efficient reaches 60 - 75 %, therefore, it features speedy temperature rise, compact dimension, convenient installation, reliable operation and lower cost ( only half of that by boiler heating system )

    該爐集燃燒與換熱為一體以爐體高溫部分進行換熱的最新間接加熱技術，煙和空氣各行其道，加熱絕對無污染，熱效率高達60 - 75 % ，升溫快，體積小，安裝方便，使用可靠且價格低，與一噸鍋爐相比，該加熱系統只相當于鍋爐加熱系統價格的一半。
  18. The company iso9001 - 2000 quality system certification, the company specialized research and development of low - power, high - efficiency high - quality vacuum heat treatment furnace and vacuum brazing furnace, vacuum sintering furnace

    公司通過iso9001 - 2000質量體系認證，公司專門研製開發低能耗、高效益高品質的真空熱處理爐和真空釬焊爐、真空燒結爐。
  19. The article introduced the using and characteristics of atmosphere forced circulation outside a pallet car heat - treatment oven, provided the ways to get high uniformity and heat - transfer efficiency inside the furnace, and confirmed main parameters of this furnace through calculation

    摘要介紹了爐外強制循環臺車式熱處理爐的用途及特點，闡述了確保爐溫均勻度和提高熱效率必須達到的要求，並通過計算對該爐的主要參數加以確定。
  20. Application of heat accumulating - type high temperature air combustion technology in heating furnace for medium plate

    蓄熱式高溫空氣燃燒技術在馬鋼中板加熱爐上的應用
分享友人
分享到 Line

分享到臉書