high-temperature region 中文意思是什麼

high-temperature region 解釋
高溫區
  • high : adj 1 高的〈指物，形容人的身高用 tall〉；高處的；高地的。2 高級的，高等的，高位的，重要的。3 高尚...
  • temperature : n. 1. 溫度，氣溫。2. 體溫。3. 〈口語〉發燒，高燒。
  • region : n. 1. 地方，地域，地帶；地區；行政區，管轄區，區；左近，鄰近；（大氣、海水等的）層，界，境。2. 【解剖學；動物學】（身體的）局部，部位。3. （學問等的）范圍，領域。4. 〈罕用語〉天空。
  1. Its principle is : a laminated structure ( beam or plate ) with delamination consists of undelaminated region and delaminted region which can be divided to upper and lower parts. when a low - amplitude and high - frequency excitation has the frequency close to some part ' s natural frequency, this part will resonate and certain amount of mechanical energy will convert to heat so that the delaminated region ' s temperature exceeds greatly that of the undelaminated region. therefore the delamination can be located by means of infrared thermograph

    其原理是具有脫層的層合材料構件（梁或板）包含脫層區域及未脫層區域，脫層區域分為上下兩部分，若對層合材料構件施加小振幅、高頻率的振動激勵，當激勵頻率恰好接近其中一部分的固有頻率時，該部分就會產生共振響應，部分機械能將轉化為熱能，使脫層區域的溫度遠高於未脫層區域，藉助紅外熱像儀即可顯示出脫層的位置。
  2. The above circul ation structure cause that rain belt tend to north in summer in china, rainfall of the yellow river valley and north china become more, but rainfall of south to the yellow river and yangtze river valley become less, meanwhile temperature of northwest and central region become high, but temperature of south department foreland become low

    這樣的高低空的環流配置造成我國夏季雨帶位置偏北，多雨區在黃河流域及華北地區，而黃河以南、長江流域降水偏少，同時我國西北和中部地區氣溫偏高，南部沿海地區的氣溫偏低。
  3. The experimental results further demonstrate that the combination of incompatibility polydimethylsiloxane and polyacrylate by co - vulcanization improves the both compatibility and broadens the low temperature and high temperature functional region. while in sin, to improve microphase structures and damping properties, the design to increase compatibility between two compositions and modulate crosslinking density as well as relative reaction rate of two compositions, is also effective

    以上實驗結果表明，在復合橡膠阻尼材料中將聚硅氧烷與聚丙烯酸酯通過共混硫化相結合，改進了二者的相容性，拓寬了其阻尼功能區的低溫和高溫溫域；而在sin中通過改善組四川大學博士學位論文分間相容性，調節交聯密度控制其微相結構和兩種組分相對反應速度的快慢，進而控制材料阻尼性能的設計是行之有效的。
  4. It has high exciton binding energy of 60 mev, which ensures efficient uv emission from the exciton and make it suitable for uv laser - emitting devices. since the first observation of the stimulated ultraviolet emission at room temperature, zno has become another hotspot in the region of uv light emitting researching

    Zno不僅是繼gan之後紫外發射材料研究的又一研究熱點，而且近年來zno薄膜作為ito薄膜的很有發展前景的替代材料，正引起人們日益廣泛的關注。
  5. Micro - jets impingement cooling heat sink is used to cool the high power lda owing to the very thin hydrodynamic and thermal boundary layers in the impingement region when a jet impinges on a surface. reasonable array of jets can develop the uniform of temperature distribution on target very much

    微射流陣列冷卻熱沉，是利用射流沖擊在駐點區能產生很薄的邊界層來提高換熱效率的，合理的布置射流孔，可以極大的提高被冷卻表面溫度分佈的均勻性。
  6. In this paper, high heat penetration into a moving particulate bed is described mathematically with a comprehensive heat and mass transfer model. the distribution of gas velocity and pressure, the temperature field of gas and solid in the moving particulate bed are examined for different conditions. the results show that thermal penetration into the moving packed - bed particles by fluid flow in porous media is high only in the position near the gas entrance. the thermal penetration thickness tends to increase with the fluid flow velocity and decrease with the particle moving velocity. in the region of thermal penetration, the porosity of solid bed has significant effect on gas field and pressure loss. it is feasible to reduce the gas pressure loss by a larger width / height packed bed in design and operation. the correspondence between thermal infection depth and particle bed height would be helpful to keep high oapacity of reactor and reduce the cost of operation

    針對移動顆粒床中物料層內的高溫氣體滲流傳熱現象，考慮滲流與傳熱的相互作用，採用局部非熱平衡假設建立了多孔介質滲流傳熱物理數學模型並進行了數值計算.研究了不同情況下床內填充多孔介質中的流速、氣固溫度和床層壓力損失.計算結果表明，高溫熱氣對移動床顆粒料層的熱滲透主要發生在滲流入口端區域，增大入口滲流速度以及減小床層物料下移速度將導致物料溫度沿床高慢速下降，熱滲透深度擴大，熱滲透作用區域內的物料溫度水平提高.在熱滲透作用區域，孔隙率對流場和壓力損失有很大的影響.研究結果對于移動顆粒床反應器的設計與運行具有一定的參考作用
  7. Normally water resources is affected by human activities and climatic change, but it is affected mainly by climatic change in runoff forming regions located in the high and middle mountainous area in the northwestern china. river runoff in the hexi inland arid region all originates from the qilian mt. area and the change of mountainous runoff resulted from global weather warming up and will bring an important effect to the development of society and economy in the hexi region. so the response on mountainous runoff and its changing trends are analyzed on the basis of the measured data of precipitation, air temperature, and discharges observed from some weather and hydrologic stations in the studied area. the results show that seasonal variation of mountainous runoff in the hexi inland region is mainly affected by the river ' s geographical location and supply source, and the yearly change by precipitation and that in the west of the region by air temperature besides precipitation. there are some obviously regional differences in the influences of climatic change on surface runoff in the hexi inland arid region, that is, rivers runoff in the west of the hexi area have been increasing and rivers in the east part have been decreasing, and the rivers runoff in the central part presented slowly increase trend, such as the heihe river, but it is not quite obvious

    一般情況下，水資源的變化主要受氣候變化和人類活動的影響，但在位於我國西北內陸乾旱地區的中高山地帶，徑流的形成主要受前者的影響.甘肅省的河西內陸乾旱區是該省重要的工農業生產和經濟開發區，這里各項社會和經濟活動與出山徑流的變化都有著十分密切的關系.因此，筆者根據有關水文氣象臺站的降水、氣溫和徑流觀測資料，分析了以黑河、昌馬河、西營河等主要河流為代表的河西內陸區出山徑流的變化特徵與規律.結果表明，河西內陸區出山口徑流的季節變化主要受地理位置和河流補給來源的影響，而年際變幅則受山區降水量年際變化及變幅的影響十分明顯.目前，梨園河以西河流水量處于上升階段，梨園河以東的河流則處于下降的階段;以黑河幹流鶯落峽水文站年徑流為代表的走廊中部地區的出山口徑流正處於1990年開始的枯水段的上升段.但總體而言，河西內陸乾旱區出山口徑流的變化相對比較穩定.預計今後若干年內，河西內陸乾旱區東段河流出山口徑流的變化以偏枯為主，中段、西段河流出山口徑流的變化以平水或平水偏豐為主
  8. The results denote that the sand layer can greatly enhance heat transfer in high temperature region because it changes film boiling to liquid film evaporation in the sand layer

    在高溫金屬面上覆蓋砂層后，可將高溫面上的膜沸騰轉化為砂粒表面的液膜蒸發，從而大幅度提高表面換熱系數，強化冷卻能力。
  9. Experimental study is performed on the mist cooling of heated high temperature surface covered by a sand layer to investigate the effects of both sand size and thickness of sand layer on heat transfer charateristics in order to enhance heat transfer of film boiling region

    摘要研究了高溫金屬面上覆蓋砂層后的噴霧冷卻換熱特性，測試了砂粒顆粒大小和砂層厚度對換熱特性的影響。
  10. Decreasing cell thickness will increase the influence of surface interaction to mid - cell phase transition, and increase the temperature, anchoring field strengths region for biaxial phase. at very high value of hc, phase symmetry in mid - cell lags behind that in surface. keywords : liquid crystal, phase transition, surface energy

    對有限厚度液晶盒，減少盒厚可增加表面相互作用對系統的影響，使雙軸相所在溫度區域增加，表面與盒中心液晶的對稱性並非總是同步，當| h _ b |較大時，盒中心液晶雙軸相的對稱性明顯滯後於表面。
  11. Results show that the interdecadal anomalies are more significant in the variance of the system anomaly in the north pacific ( np ), and the interannual and interdecadal anomalies are about equivaleut in the tropical pacific ( tp ) ; the interdecadal change characters of the surface ( shallow ) layer of the ocean and the atmosphere aloft are unanimous in the same season and region, and their transition from a low mode to a high mode both occurred from the end of 1970s to the beginning of 1980s, with an exception for july in the np, which is related to the stability of the stratification of sea temperature within the sub - surface layer ; the interannual scale air - sea anomalies are associated with enso, is most typical for january, then july in the tp, followed by january in the np, and there is no visible relationship for july in the np

    在海氣系統異常的方差構成中，北太平洋區域以年代際異常為主，熱帶太平洋區域年際和年代際異常相當；表（淺）層海洋與大氣的年代際變化特徵對同一季節、區域是一致的，且20世紀70年代後期到80年代初均發生由低模態向高模態的轉變；北太平洋區域的7月與此不同，這與該季節近表層海溫層結穩定有關；年際尺度的海、氣異常與enso有關，且以熱帶太平洋區域1月最典型， 7月次之，北太平洋區域1月再次之， 7月無明顯關系。
  12. Due to the large exciton binding energy of 60mev, which ensures the high efficient excitonic emission at room temperature, it is regarded as one of the most promising materials for fabricating efficient ultraviolet ( uv ) and blue light emitting devices. since the first observation of the stimulated ultraviolet emission at room temperature, zno has become another hotspot in the region of uv light emitting researching

    氧化鋅在室溫條件下具有較高的激子束縛能（ 60mev ） ，保證了其在室溫下較強的激子發光，是製作紫外光電子器件的合適材料，自1997年首次發現zno室溫紫外受激發射以來， zno研究已成為繼gan之後紫外發射材料研究的又一研究熱點。
  13. Abstract : polyphenylacetylenes were synthesized by rn ( nbd ) cl 2 and wcl6 / ph4sn catalyst systems in n2 at room temperature. polymers with high yield and high molecular weight were obtained. their structures were characterized by uv, ir, nmr and gpc, respectively. the fluorescence of the polymer solution with different concentration was investigated using variable excitation wavelength from uv to visible region. the relation between fluorescence and polymer structure was studied. the results showed that the molecular chain structure has great influence on fluorescence of the polymers. the emitting peak wavelength of fluorescence for the polymer of high stereoregularity is independent of solution concentration and excitation wavelength. the emitting peak wavelength of fluorescence for the polymer with disordered molecular chain arrangement varies with changing the solution concentration and excitation wavelength, and different emission sites in molecular chains and low emitting yield are shown. the measurement and analysis of fluorescence spectroscopy of polyphenylacetylenes may provide some useful information to judge the molecular chain arrangement in some conjugated polymers

    文摘:使用有機金屬銠、金屬鎢/四苯基錫催化劑體系聚合苯乙炔，分別獲得了高產率和高分子量的聚苯乙炔.使用uv ， ir ， nmr ， gpc等分別對聚合物結構進行了表徵.採用不同波長的激發光對聚合物熒光性能進行研究，詳細分析了聚合物結構與熒光性能之間的關系.研究結果發現，不同聚合物結構對聚合物熒光性能產生很大影響，規整性高的聚合物，將有較高的發光量子效率；聚合物規整性差，將可能導致多個熒光發光結構點，其熒光強度降低.聚合物熒光光譜研究將對某些共軛聚合物結構的規整性分析提供一些有用的信息
  14. With the decoupling average technique and high - temperature approximation, we obtain the graph of the system magnetization evolving, which clearly exhibit the critical slowing phenomena of xy model near the phase transition region

    運用退耦平均技術，在高溫近似下數值模擬得出的平均磁化強度的時間演化，清楚地展示了xy模型在相變發生區域內的臨界慢化現象。
  15. 3 ) the upper air stream circumstances along with strong ssw event mainly was separated to three kinds : the northern advance of aleutian high pressure, the northern advance of north atlantic high pressure, the northern advance of aleutian high pressure and north atlantic high pressure at the same time. their final effect was to make polar region vortex collapse and to increase polar region temperature

    3 ）伴隨強ssw事件的高空環流形勢主要有3種：阿留申高壓北進，北大西洋高壓北進，北大西洋高壓和阿留申高壓共同北進，它們的最終效果是使極渦崩潰、極區增溫。
  16. Stars at the upper right corner have low surface temperature, hence low energy output per area, but still high luminosity. so, stars in this region are physically very large. we call them

    位於右上角的星，雖然表面溫度很低即單位面積的能量輸出也低，但卻有極大的光度，所以這些星體積一定非常大，我們稱之為
  17. Additional annealing experiments in nitrogen atmosphere revealed that the heavily damaged region with hydrogen - induced defects appears to be the adsorption center for the outside oxygen to diffuse into the silicon during the high - temperature annealing process, and consequently, broaden the thickness of the box layer. this important finding may provide a possible solution to reduce the cost of the conventional simox - soi wafers while maintaining a desirable box thickness

    獨特設計的氮氣氛退火及分步退火實驗證明了原注入樣品的缺陷層中氫及氫致缺陷的存在使得在退火過程中加速外界氣氛中的氧擴散進來，並成為強捕獲中心使擴散進來的氧滯留于缺陷層從而促使氧缺陷層中的氧沉澱生長，加速了高溫退火中的內部熱氧化過程，從而形成了比傳統相同劑量simoxsoi厚得多的氧化埋層。
  18. The periodicity fluctuating has been produced by pulse magnetic field so that there are periodic high temperature region exists in sintered body, it results in the symmetrical crack in sintered body of zro2

    感生磁場的存在引起電場周期性的波動，在燒結體內產生不同的溫度區域，是造成燒結體內產生分佈均勻裂紋的主要原因。
  19. So the high - temperature region distributes approximately as a ring shape along highway belt near the 2nd and 3rd ring roads

    熱島演變與近幾年城市建設和改造活動密切相關。
  20. The large - scale superconducting magnets are presently widely used in modern high - energy particle accelerators and nuclear fusion experimental device, which generally operate at liquid helium temperature region. cryogenic technology is developing with the requirement of operation for superconducting magnets

    而超導磁體大都運行在約4 . 5k （ - 269 ）的液氦溫區，這又促進了低溫技術的發展。
分享友人
分享到 Line

分享到臉書