plate column 中文意思是什麼

plate column 解釋
板式塔
  • plate : n 1 厚金屬板 〈cf sheet〉 板（片）；（記有姓名等的金屬）牌子，（尤指醫生的）招牌，藏書牌；【印刷...
  • column : n 1 【建築】圓柱；圓柱狀物〈如煙柱〉。2 【軍事】縱隊 （opp line）; 隊；（艦隊的）縱陣，縱列，艦列...
  1. Aseismatic strengthening of reinforced concrete short column with steel plate hoops

    鋼筋混凝土短柱利用外包鋼板箍抗震加固的設計
  2. From the analysis, some suggestion about joint rigidity design is put forward : 1. joint initial rigidity can be enhanced within the limited range when to increase end - plate thickness ; 2. the rigidity and ultimate moment can be enhanced obviously when to adopt the beam with inclined section or to add axilla at the connections between beam and column ; 3. withm the permissive construction condition, exteriorly extended end - plate inclinedly placed is suggested to be applied firstly ; 4. when the rate of joint rigidity to beam rigidity, that is called, is less than 0. 1, the joints can be regarded as zero - rigidity joints ; on the other hand, if is more than 26, it is rigid connection joints

    採用斜截面梁並在樑柱交接處局部加腋能明顯提高節點剛度和梁的抗彎能力； 3在允許的施工條件下，應優先採用外伸式端板斜放節點，有利於提高節點剛度，進而提高節點的抗彎能力； 4節點剛度與其連接構件的剛度比值0 . 1時，可按鉸接節點設計； 26時，可按剛接節點設計。
  3. Steel moment - resisting frames with welded beam - to - column connections were traditionally regarded as having excellent performance, and widely adopted in steel constructions, but this opinion changed after the 1994 northrige earthquake and the 1995 hyogoken - nanbu earthquake. these earthquakes also arouse engineers to resurvey the behavior of end - plate connections

    傳統觀點認為，樑柱焊接剛性連接具有較好的抗震性能，因此在工程中得到了廣泛地應用，但1994年的northrige地震和1995年的阪神地震改變了這種傳統觀點，這兩次地震也引起了工程技術人員對端板連接的再審視。
  4. The main popular theoretical method adopted to study end - plate connection is finite element technique under monotonic loading at present. this paper applies nonlinear ( material, geometry and contact ) finite element method to analyze the behaviors of connections under cyclic load at fist time. contact elements are set between end plate and column flange, screw cap and neighborhood plane, bolt bar and hole

    對于端板連接的理論分析，目前國內外的研究主要局限在單向加載有限元分析范疇，本文首次採用三維非線性（包括材料、幾何與狀態非線性）有限元對端板連接進行了循環加載分析，端板與柱翼緣間、螺栓頭（帽）與相鄰板件間、螺栓桿與孔壁間都設置了反映邊界狀態的接觸單元。
  5. In this thesis, four types of steel beam - rectangular cfst column connections, including normal welded flange plate ( wfp ) connection, bolted flange plate ( bfp ) connection, stiffened end plate ( sep ) connection and double split - tee plate ( dst ) connection, were designed based on the configuration of steel frame connection. total 8 models, 2 models of each kind of connections were tested under low - reversed cyclic loading at the end of cfst columns. the relationships between force and displacement at the end of columns, the relationships between the moment and rotation of the joints, degradations of strength and stiffness, ductility, failure mechanism and failure characteristics of these four connections under different axial - compression ratios were presented

    本文借鑒鋼框架節點構造，設計了四種類型矩形鋼管混凝土柱與鋼梁連接節點，包括常規栓焊（ wfp ）節點、翼緣全螺栓連接（ bfp ）節點、雙t板連接（ dst ）節點以及加勁端板連接（ sep ）節點，進行了四類節點8個模型試件在柱端低周反復荷載作用下的抗震性能試驗研究，比較了不同軸壓比下節點的滯回性能、強度與剛度退化、延性、破壞機理與破壞特徵，主要結論有： 1 、節點的位移滯回曲線與轉角滯回曲線為塊型分佈，沒有或略有捏攏現象，耗能能力強； 2 、軸壓比對節點滯回曲線有顯著影響，全部節點都有顯著的剛度退化； 3 、位移與轉角骨架曲線在峰值荷載後有較長的水平或下降段，具有良好的延性性能； 4 、從整體抗震性能上看，翼緣全螺栓連接節點、雙t板連接與加勁端板連接節點都優于常規栓焊節點，可在實際工程中加以推廣。
  6. Secondly, this paper made some theoretic researches on its engineering classfication and applicable scope for this technology ; then combining with project example, this paper carried out scheme design for this technology, and compared some different kinds of underpinning scheme and node and structure design, and put forward the method of " reinforcce steel bar through column " to build pile cap beam, " resistant bend and shear anchored reinforce steel bar " to strengthen column consolidation effect, and the method of " steel plate hoop " to build reinforcing bar connection of the foundation beam, etc. in the process of the consturction scheme research and implement, this paper synthetically elaborated the organizaton for project construction, put forward the construction technical measure of specific aim on the artificial pile, and pile cap beam, and underground adding layer and structure stabilization, and overall structure stabilization and so on. for this project, adopt reinforcing bar concrete to brace hole wall to ensure the safety of engineering in the artificial pile construction, use flexible connection catch to make the cage hoisting easier to simplify the construction process, use the method of earthwork statified symmetrical balance in the process of underground adding layer excavation

    本文首先對于基礎托換與結構加固技術的目的和意義、國內外發展狀況進行了綜合闡述；其次對該項技術工程分類及適應范圍進行了理論上的分析研究；然後結合工程實例對該項技術進行了方案設計，對比幾種不同的托換方案和節點及構造設計，提出了「通筋穿柱法」做承臺梁， 「抗彎抗剪錨筋法」強化柱加固效果， 「鋼板箍法」做地基梁鋼筋連接點等多項技術；在施工方案的研究和實施過程中，對于工程施工組織進行綜合闡述，並就人工挖孔樁、承臺梁、地下加層及結構加固、整體結構穩定等專項施工方案提出有針對性的施工技術措施，人工挖孔樁施工採用鋼筋砼護壁確保挖孔樁的安全成型，使用柔性連接鉤進行鋼筋籠吊裝簡化施工工序；承臺梁施工採用梁主筋橫穿柱身化學膠錨固等；地下加層綜合施工技術採用土方分層對稱平衡開挖，分段挖土做筏基結構自穩等；最後對于該工程實施后的效果分析，說明該項綜合施工技術的可行性。
  7. Same effect can be achieved through laying floor plate on high rack column

    可以通過在高架立柱上鋪設樓板達到相同的效果。
  8. The factors, such as end - plate thickness, bolt ' s types, beam and column " flank, that can effect on the joint rigidity and moment capability, are analyzed

    分析了節點端板厚度、螺栓類型、端板的加勁肋等因素對節點剛度以及抗彎承載力的影響。
  9. Ceramic column plate

    陶瓷搭板
  10. Modeling resistant coefficient for sieve plate column with matlab

    的板式塔阻力系數建模
  11. Plate rectification column

    板極整六
  12. Nonlinear finite element analysis of beam - column end - plate joints

    樑柱端板連接節點的非線性有限元分析
  13. It is demonstrated that the use of the perforated plate affords a high level of gas holdup, especially at higher superficial gas velocities, and nearly uniform distributions of the solid within the column

    結果表明，多孔板分佈器加入后淤漿床內的氣含率較高，這種差異在較大表觀氣速下尤為明顯，同時床內的流動變得均勻。
  14. Test on extended end - plate with end - plate stiffer beam - to - column connection

    帶端板加勁肋的外伸端板連接的樑柱節點試驗
  15. Thus it is necessary to study moment resistance, rotation stiffness and rotation capacity of the joints. in this paper, six specimens on end - plate composite beam - to - column joints and two specimens on end - plate composite beam - to - column joints were designed to subject to static load. the factors of m - characteristics about semi - rigid composite joints, including bolts, profiled steel sheeting, beam, column, stiffen rib and reinforcement, are studied

    本文設計了6個端板型鋼-混凝土組合樑柱節點與2個端板型純鋼樑柱節點，通過對這些試件的靜力荷載試驗，重點研究了端板型鋼-混凝土組合節點的彎矩-轉角性能的影響因素，包括高強螺栓、壓型鋼板、型鋼梁、型鋼柱、加勁肋，以及混凝土板內縱向鋼筋配筋率等。
  16. 3. the calculating elements and the calculating model of rib - column, rib - beam and retaining plate of the supporting structure are proposed in this paper

    3 、提出了肋柱、肋梁和擋土板的計算單元劃分以及計算模型的確定方法。
  17. The 24 - plate column is normally used for continuous distillation experiments and the 12 - plate distillation column for batch distillation experiments

    24盤的蒸餾塔通常情況下是用來持續的蒸餾試驗而12盤的蒸餾塔則是用來作成批的蒸餾試驗。
  18. Columns ; plate column and packed column ; main section, column section for exchange elements ; dimensions

    柱.板式柱和填充柱.可交換元件的主要部分和柱部分.結
  19. In order to improve the design of technique within edible oil engineering, according to the structure feature of the plate column used in oil plant recently, the method of calculation has been studied, including the detail calculation of dieter, height, number of plates and effciency of the plate column

    摘要針對目前食用植物油加工過程中廣泛應用的板式塔的結構特點作了較為詳盡的工藝計算，給油脂工程設計尋求到充分的理論依據，從而使板式塔的計算更加精確，促使油脂工程設計水平達到一個新的高度。
  20. Basic design principle and development direction of plate column

    板式塔的基本設計原理及發展方向
分享友人
分享到 Line

分享到臉書