pressure-effect distribution 中文意思是什麼

pressure-effect distribution 解釋
壓力作用分佈
  • pressure : n 1 壓；按；擠；榨。2 【物理學】壓力，壓強；大氣壓力；電壓。3 精神壓力，政治[經濟、輿論等]壓力。4...
  • effect : n 1 結果。2 效能，效果，效力，效應，作用，功效；影響。3 感觸，印象；外觀，現象。4 旨趣，意義。5 ...
  • distribution : n 1 分配，分發，配給；分配裝置[系統]；配給品；配給量；【經濟學】配給方法，配給過程；分紅；【法律...
  1. Abstract : apply computer simulation to the distribution pattern of air - flow without considering the cold condition of the combustion and compare the flow patterns under different designed circumstances. and the effect of the design of the partition in the air way of the burner on the flow and mixture of gas and air is especially studied. the result shows that the design of partition plays a very important role in strengthening the mixture of gas and air, but increases the loss of the resistance in the air way and the total pressure of the air way in same working conditions needs increasing

    文摘:應用計算機模擬的方法，在不考慮燃燒的冷態情況下，研究了熱風爐燃燒室內的氣流分佈規律.在此基礎上，比較了2種不同設計方案的氣流流動特徵，尤其是研究了燃燒器空氣通道內阻流板的設置與否對空氣和煤氣的流動和混合的影響.結果表明，阻流板的設計對加強空氣和煤氣的混合有著極為重要的作用，同時也增加了空氣管道的阻力損失，在同樣的工況條件下需要提高管道系統的總壓力
  2. The electronic temperature, intensities of all lines and continuous spectra gradually increased with the increment of laser energy, and they got to maximum at different laser energy. our results of copper and aluminum show that there are possibly different thresholds of laser energy to electronic temperature and intensities of emission spectra of laser ablated plasma. at the different environmental gas pressure, spatial emission intensity distribution is explained by the competition among " heat reservoir effect ", " confined effect " and " s hadow effect "

    認為cu等離子體羽的發光機制是由電子與粒子的碰撞傳能、電子與離子的復合形成的；隨激光能量的增加， cu等離子體特徵輻射（分立譜） 、連續背景輻射（連續譜） 、電子溫度都出現最大值；結合對al的實驗結果說明：激光燒蝕金屬產生的等離子體，其特徵輻射、連續輻射、電子溫度可能都存在一定的能量閾值；背景氣壓對激光燒蝕等離子體譜線的影響，其機理可以認為是「熱庫效應」 、 「約束效應」及「陰影效應」相互競爭的綜合結果。
  3. In this paper, high heat penetration into a moving particulate bed is described mathematically with a comprehensive heat and mass transfer model. the distribution of gas velocity and pressure, the temperature field of gas and solid in the moving particulate bed are examined for different conditions. the results show that thermal penetration into the moving packed - bed particles by fluid flow in porous media is high only in the position near the gas entrance. the thermal penetration thickness tends to increase with the fluid flow velocity and decrease with the particle moving velocity. in the region of thermal penetration, the porosity of solid bed has significant effect on gas field and pressure loss. it is feasible to reduce the gas pressure loss by a larger width / height packed bed in design and operation. the correspondence between thermal infection depth and particle bed height would be helpful to keep high oapacity of reactor and reduce the cost of operation

    針對移動顆粒床中物料層內的高溫氣體滲流傳熱現象，考慮滲流與傳熱的相互作用，採用局部非熱平衡假設建立了多孔介質滲流傳熱物理數學模型並進行了數值計算.研究了不同情況下床內填充多孔介質中的流速、氣固溫度和床層壓力損失.計算結果表明，高溫熱氣對移動床顆粒料層的熱滲透主要發生在滲流入口端區域，增大入口滲流速度以及減小床層物料下移速度將導致物料溫度沿床高慢速下降，熱滲透深度擴大，熱滲透作用區域內的物料溫度水平提高.在熱滲透作用區域，孔隙率對流場和壓力損失有很大的影響.研究結果對于移動顆粒床反應器的設計與運行具有一定的參考作用
  4. Using method of oil - flow visualization techniques and measuring pressure distribution along airfoil chordwise and spanwise studies have been down for sidewall boundary - layer displacement effect in two - dimensional wind tunnel. three different chord models were tested in two different wind tunnel. in order to clarify the sidewall effects and study method of sidewall suction theory and sidewall interference correction method to remove effects of sidewall on model. the results of oil - flow test show that selection rational suction wary can obtain better testing results. by investigations on effects of the sidewall boundary layer suction and application of a sidewall interference correction method

    為了很好地解決多機場航班隊列的擁塞問題，在將進場容量、離場容量與機場容量作為統一整體的情況下，充分考慮了機場間的網路效應，詳細研究了多機場航班隊列的優化問題，建立了多機場開放式非實時流量管理的數學模型，通過選取適當的決策變量，使其為線性0 - 1整數規劃模型，實現了中心流量集中管理.與其它演算法不同，本文提出的啟發式隱枚舉演算法能很好地解決此類問題，對某機場網路系統的模擬結果證明了所建模型、優化演算法及相應軟體的有效性和可靠性
  5. For the construction of single - arch tunnel within cracked surrounding rocks, 8 tunnel models are set up to study the effect of the earth pressure distribution of the various surrounding rocks due to excavation. the relationships between the loosen zone of tunnel radial earth pressure and the tunnel diameter, the characteristics of surrounding rocks and the exposed time are revealed. it is showed that the pressure loosen radius is 1. 2 ~ 2. 0 tunnel diameters and the strongly loosen radius drops to 0. 5 ~ 1. 0 one for double lane tunnel

    對于單拱破碎圍巖隧道的構築問題，作者設置了8個隧道模型，研究開挖對不同隧道圍巖壓力分佈的影響，揭示了洞周徑向壓力的鬆弛范圍與洞徑、圍巖特性、裸露時間的關系，得到雙車道隧道壓力鬆弛半徑為1 . 2 2 . 0倍洞徑，強烈鬆弛區半徑為0 . 5 1 . 0倍洞徑。
  6. Based on comparison of several technical schemes, the method of sand bedding pre - elevating and step water - filling pre - compressing is adopted. so the dissertation is consist of two parts : ( 1 ) the applicability study for the method of sand bedding pre - elevating and step water - filling pre - compressing, including numerical analyses for the thickness of sand bedding, the consolidation, settlement and stability of foundation, drainage, possibility of foundation liquefaction under seismic loading, et al. ( 2 ) monitoring at construction stage and checking the effect of foundation treatment, including the measurements of the settlement velocity and non - uniform settlement of ring beam under the tank, pore pressures and horizontal displacements in foundation, the pressure distribution at the bottom of oil tank and the strength increase of soils

    通過多種技術方案比較，最終選擇了技術先進的砂墊層預抬高分級充水預壓法，論文工作主要由以下兩部分組成： （ 1 ）砂墊層預抬高分級充水預壓法的適用性研究，其中包括砂墊層厚度、地基沉降與固結度、地基穩定性、降水、地震作用下砂土液化的可能性等方面的計算分析； （ 2 ）施工監測與地基處理效果檢驗，其中包括油罐環梁基礎沉降速率與不均勻沉降程度、各分級充水加載階段地基超靜孔壓與深層水平位移、油罐底板壓力分佈及地基土強度增長等方面的實測與數據分析。
  7. The conclusions are as follows : ( 1 ) high - pressure water - atomization can be used to produce a pre - alloyed steel powder with high apparent density, high green strength, size - stability after sintering and low hydrogen - loss content ; ( 2 ) the higher smelting temperature and / or water pressure, the finer particle size of steel powders ; ( 3 ) when the atomization angle holds in a reasonable value ' s range the obtained powder will have a better particle size distribution ; ( 4 ) an optimum atomization technological parameters : liquid steel flux, water pressure and water prick angle was obtained ( 5 ) reduction variables ( temperature, holding time, material - bed ' s thickness and reducing gas flux ) have a significant effect on the particle agglomeration and properties of final powder was given ( 6 ) different alloying methods were developed to modify properties of ferrous powder materials and hence to broaden its applications in ferrous powder metallurgy industry

    本文系統研究了水霧化預合金鋼粉生產工藝及合金化方法對鐵基粉末冶金材料性能影響，詳細研究了冶煉、霧化、還原工藝參數對預合金鋼粉化學成份和物理性能影響，並得出如下結論： （ 1 ）採用高壓水霧化技術可用於生產高密度、高強度、尺寸穩定性的低氫損含量的水霧化預合金鋼粉。 （ 2 ）冶煉溫度越高，高壓水壓力越大，所得生粉顆粒粒度越細。 （ 3 ）水錐角調整在一個適當角度范圍內可獲得粒度組成較好的生粉。
  8. The effect of the properties of catalytic converter on the pressure drop and velocity distribution was analyzed using cfd code cfx4. 3

    通過數值模擬試驗，分析了三效催化器的主要結構參數對壓降和流速分佈的影響。
  9. From the distribution of initial flow, the optimal calculation of pipe networks and the drawing of the figure on equal hydraulic pressure line, they are connected with each other, if anyone of them is ameliorated, it will improve the total effect

    從初始流量分配、管網優化計算到等水壓線圖的繪制，這三部分是密不可分的，任何一部分的改進與完善都有利於整體優化效果的提高。
  10. Experiment data is analyzed with method of projection pursuit for more reliability and utility value. this paper first systematically studied energy dissipater of suspension girder in steep gradient with supercritical flow according to used in actual engineering and received perfect effect. experimental studies about the distribution velocity, the variation of water surface and pressure are undertaken

    然而，文章主要針對已獲國家自然科學基金資助，且已在實際工程實踐中產生了良好消能效果的陡坡急流懸柵消能工的部分試驗成果，進行了較全面深入地討論，即具體根據試驗資料系統分析了懸柵陡槽內泄水時的流速分佈、底板壓力分佈及水面線變化情況。
  11. Surrounding rock abutment pressure distribution and thickness effect of dynamic catastrophic in fully mechanized sublevel mining stope

    綜放采場圍巖支承壓力分佈及動力災害的層厚效應
  12. The analyzed and contrasted results of the distribution of the surface pressure distributions and the sectional side forces with the former results of the slender body in the same flow conditions show that the shm ' s control effect to the slender body is due to that the two asymmetric vortices over the slender body model are sensitive to the nose perturbations

    通過對物面壓力分佈、截面側向力分佈和以前細長旋成體結果的對比和分析，發現單孔位微吹氣擾動對于細長旋成體橫側向控製作用在於模型頭部背風側非對稱二渦結構對擾動的敏感性。
  13. The main results of the wind tunnel experiment on the 1 200 model of the chinese national grand theatre were introduced. at first, the wind pressure distributions of its semi - ellipsoidal surface in an atmospheric boundary layer flow were simulated, and the effect of the surface roughness was researched. the results indicated a reasonable regularity of its wind loading in various wind directions. on the problem of the environmental influence, it demonstrated that there existed a great effect for the pressure distribution of the great theatre when the grand hall is at east

    介紹中國國家大劇院模型表面風荷載的風洞實驗結果。首先對它的半橢球表面在大氣邊界層中的風壓分佈及增加表面粗糙度的影響進行研究，實驗結果表明在不同風向下它的風荷載具有很好的規律性。有環境影響的對比實驗結果表明人民大會堂對大劇院的風荷載有較大的影響。
  14. Based on this theory, outdoor experiment has obtained good results. a large amount of experimental data about pressure and displacement show that the soil - pressure ' s distribution and the grout effect accord with theory on the whole

    按照理論計算的思路進行室外現場試驗，取得了良好的效果，試驗的壓力、位移數據表明，壓力分佈與位移效果基本上與理論研究相一致。
  15. In this thesis, pressure distribution model of water film in sliding shoes supporting clearance with considering inertia is deduced and according curve is drawn to vividly illustrate the effect of inertia on water film

    本文推導出了考慮慣性時滑靴支承間隙中水膜的壓力分佈模型，並作出曲線加以形象的說明。
  16. This valve being mounted in the water distribution pipes with its pilot valve being pre - setted in a fixde flow - rate which enable the pressure variation of the main body ' s upper - reach not to have an effect on the flow volume of the outlet

    本閥安裝于送配水管路中，可預先設定其上之導向閥于某一固定流量，使其主閥進口壓力變化而不會影響出水口。
  17. ( 3 ) whether in summer or in winter in the district where topography is changed, compared to the modern simulation the simulated base climatology changes such as surface temperature, sea level pressure precipitation and so on which denotes the difference in land - ocean distribution can have effect on the climatology

    試驗模擬的氣候基本態（如表面氣溫、海平面氣壓、降水、高低空流場）與現代模擬相比發生一定的變化，表明海陸差異對氣候造成了一定的影響。
  18. Effect of gas pressure on pore distribution of lotus - type porous magnesium fabricated by unidirectional solidification

    氣壓對定向凝固藕狀多孔鎂的氣孔分佈影響
  19. The conveying medium in pipe has great effect on buried pipeline ’ s damage, its flow pattern, temperature, pressure change, velocity, all of these can influence the shell of pipe and its stress distribution. so it is very important to analyze the fluid - pipe coupling

    管道內部的輸送介質對管道破壞影響也很大，管內介質的流態、溫度、壓力變化、流速等對管壁變形和應力分佈都有影響，故管道內流體和管道間的耦合分析對地下管道破壞分析很重要。
分享友人
分享到 Line

分享到臉書