rate of temperature increase 中文意思是什麼

rate of temperature increase 解釋
增溫率
  • rate : n 1 比率，率；速度，進度；程度；（鐘的快慢）差率。2 價格；行市，行情；估價，評價；費，費用，運費...
  • of : OF ＝Old French 古法語。
  • temperature : n. 1. 溫度，氣溫。2. 體溫。3. 〈口語〉發燒，高燒。
  • increase : vt 增加，增大，增多；增強，增進 （opp decrease）。 increase speed 增加速度。 increase one s pace ...
  1. The results showed that the soy protein dough was a typical pseudoplastic fluid in the normal processing ranges, and the apparent viscosity decreased with the increase of shear rate and moisture content, and also decreased with the increase of temperature below 120, and increased with the reduction of temperature above 120

    實驗結果表明：大豆蛋白質面團呈現很強的非牛頓性，剪切速率、溫度和含水率對表觀黏度影響顯著；表觀黏度隨剪切速率的增大而減小，隨含水率的增大而減小，溫度低於120時，隨溫度的升高而減小，溫度高於120時，隨溫度的升高而增大。
  2. The sgr ( spherulite growth rate ) of phbv is related to crystallization temperature. with the increase of temperature, sgr increase first then decrease. some sample ' s sgr will increase again at high temperature area

    Phbv的球晶生長速度與時間無關，隨溫度的升高有先上升後下降的趨勢，部分樣品在最後球晶速度會再次上升。
  3. Abstract : soil incubation experiments were conducted in lab to delineate the effect of soil temperature and soil water content on soil respirations in broad - leaved / korean pine forest ( mountain dark brown forest soil ), dark coniferous forest ( mountain brown coniferous forest soil ) and erman ' s birch forest ( mountain soddy forest soil ) in changbai mountain in september 2001. the soil water content was adjusted to five different levels ( 9, 21, 30, 37 and 43 ) by adding certain amount of water into the soil cylinders, and the soil sample was incubated at 0, 5, 15, 25 and 35 for 24 h the results indicated that in broad - leaved / korean pine forest the soil respiration rate was positively correlated to soil temperature from 0 to 35. soil respiration rate increased with increase of soil water content within the limits of 21 to 37, while it decreased with soil water content when water content was over the range. the result suggested the interactive effects of temperature and water content on soil respiration. there were significant differences in soil respiration among the various forest types. the soil respiration rate was highest in broad - leaved / korean pine forest, middle in erman ' s birch forest and the lowest in dark coniferous forest. the optimal soil temperature and soil water content for soil respiration was 35 and 37 in broad - leaved / korean pine forest, 25 and 21 in dark coniferous forest, and 35 and 37 in erman ' s birch forest. because the forests of broad - leaved / korean pine, dark coniferous and erman ' s birch are distributed at different altitudes, the soil temperature had 4 - 5 variation in different forest types during the same period. thus, the soil respiration rates measured in brown pine mountain soil were lower than those in dark brown forest and those measured in mountain grass forest soil were higher than those in brown pine mountain soil

    文摘:為了研究土壤溫度和土壤含水量對闊葉紅松林（山地暗棕壤） 、雲冷杉暗針葉林（山地棕針葉林土壤）和岳樺林（生草森林土）的土壤呼吸的影響，於2001年9月在長白山進行了土壤實驗.利用增加土壤樣柱的含水量，將土壤含水量分為9 ， 、 21 、 30 、 37和43 5個等級，土壤樣品分別在0 、 5 、 15 、 25和35的溫度下保持24小時.闊葉紅松林土壤在0 （ 35范圍內，土壤呼吸速率與溫度呈正相關.在一定的含水量范圍內（ 21 （ 37 ） ，土壤呼吸隨含水量的增加而升高，當含水量超出該范圍，土壤呼吸速率則隨含水量的變化而降低.土壤溫度和水分對土壤呼吸作用存在明顯的交互作用.不同森林類型土壤呼吸作用強弱存在顯著差異，大小順序為闊葉紅松林>岳樺林>雲冷杉暗針葉林.紅松闊葉林土壤呼吸作用的最佳條件是土壤溫度35 ，含水量37 ;雲冷杉暗針葉林下的山地棕色針葉土壤呼吸作用的最佳條件是25 ， 21 ;岳樺林土壤呼吸作用的最佳條件是35 ，含水量37 .但是，由於長白山闊葉紅松林，雲冷杉林和岳樺林處在不同的海拔帶上，同期不同森林類型土壤溫度各不相同，相差4 ~ 5 ，所以野外所測的同期的山地棕色針葉林土呼吸速率應低於暗棕色森林土呼吸速率，山地生草森林土呼吸速率應高於山地棕色針葉林土的呼吸速率.圖2表1參25
  4. Soil incubation experiments were conducted in lab to delineate the effect of soil temperature and soil water content on soil respirations in broad - leaved / korean pine forest ( mountain dark brown forest soil ), dark coniferous forest ( mountain brown coniferous forest soil ) and ermans birch forest ( mountain soddy forest soil ) in changbai mountain in september 2001. the soil water content was adjusted to five different levels ( 9, 21, 30, 37 and 43 ) by adding certain amount of water into the soil cylinders, and the soil sample was incubated at 0, 5, 15, 25 and 35 for 24 h the results indicated that in broad - leaved / korean pine forest the soil respiration rate was positively correlated to soil temperature from 0 to 35. soil respiration rate increased with increase of soil water content within the limits of 21 to 37, while it decreased with soil water content when water content was over the range. the result suggested the interactive effects of temperature and water content on soil respiration. there were significant differences in soil respiration among the various forest types. the soil respiration rate was highest in broad - leaved / korean pine forest, middle in ermans birch forest and the lowest in dark coniferous forest. the optimal soil temperature and soil water content for soil respiration was 35 and 37 in broad - leaved / korean pine forest, 25 and 21 in dark coniferous forest, and 35 and 37 in ermans birch forest. because the forests of broad - leaved / korean pine, dark coniferous and ermans birch are distributed at different altitudes, the soil temperature had 4 - 5 variation in different forest types during the same period. thus, the soil respiration rates measured in brown pine mountain soil were lower than those in dark brown forest and those measured in mountain grass forest soil were higher than those in brown pine mountain soil

    為了研究土壤溫度和土壤含水量對闊葉紅松林（山地暗棕壤） 、雲冷杉暗針葉林（山地棕針葉林土壤）和岳樺林（生草森林土）的土壤呼吸的影響，於2001年9月在長白山進行了土壤實驗.利用增加土壤樣柱的含水量，將土壤含水量分為9 ， 、 21 、 30 、 37和43 5個等級，土壤樣品分別在0 、 5 、 15 、 25和35的溫度下保持24小時.闊葉紅松林土壤在0 （ 35范圍內，土壤呼吸速率與溫度呈正相關.在一定的含水量范圍內（ 21 （ 37 ） ，土壤呼吸隨含水量的增加而升高，當含水量超出該范圍，土壤呼吸速率則隨含水量的變化而降低.土壤溫度和水分對土壤呼吸作用存在明顯的交互作用.不同森林類型土壤呼吸作用強弱存在顯著差異，大小順序為闊葉紅松林>岳樺林>雲冷杉暗針葉林.紅松闊葉林土壤呼吸作用的最佳條件是土壤溫度35 ，含水量37 ;雲冷杉暗針葉林下的山地棕色針葉土壤呼吸作用的最佳條件是25 ， 21 ;岳樺林土壤呼吸作用的最佳條件是35 ，含水量37 .但是，由於長白山闊葉紅松林，雲冷杉林和岳樺林處在不同的海拔帶上，同期不同森林類型土壤溫度各不相同，相差4 ~ 5 ，所以野外所測的同期的山地棕色針葉林土呼吸速率應低於暗棕色森林土呼吸速率，山地生草森林土呼吸速率應高於山地棕色針葉林土的呼吸速率.圖2表1參25
  5. The quality of buffer layer and thin films was analyzed by afm, xrd, rheed and xps respectively. the effect of the experimental parameters such as carbonization time, working pressure, c source gas flow rate, carbonization temperature, different carbonization gas and substrate on the carbonization process was studied firstly. it was observed that the size of particles was increased with the increase of carbonization time and the rms was opposite, but the trend was reduced while the carbonization time was long enough ; the size of particles was increased with the increase of working pressure too, and choosing a proper working pressure could get a smooth surface ; the size of particles was unobviously changed while the gas flow rate was low, but it was notability increased with the increase of gas flow rate while the gas flow rate was high enough, and a smooth surface could be also obtained by choosing a proper gas flow rate ; with the increase of carbonization temperature, the size of particles was increased, the rms is decreased and a good single - crystalline carbonization layer could be obtained, but a rough surface was formed at a excessive high temperature ; the rms of

    對于碳化工藝，側重研究了碳化時間、反應室氣壓、 c源氣體的流量、碳化溫度以及不同種類的c源氣體、基片取向等因素對碳化層質量的影響，研究結果表明:隨著碳化時間的增長，碳化層的晶粒尺寸隨之變大，表面粗糙度隨之降低，但當碳化到一定時間之後，碳化反應減緩，碳化層的晶粒尺寸以及表面粗糙度的變化幅度變小;碳化層的晶粒尺寸隨反應室氣壓的升高而變大，適中的反應室氣壓可得到表面比較平整的碳化層;在c源氣體的流量相對較小時，碳化層的晶粒尺寸隨氣體流量的變化不明顯，但當氣體流量增大到一定程度時，碳化層的晶粒尺寸隨氣體流量的增大而明顯變大，同時，適中的氣體流量得到的碳化層表面粗糙度較低;碳化溫度較低時，碳化層的晶粒取向不明顯，隨著碳化溫度的升高，碳化層的晶粒尺寸明顯變大，且有微弱的單晶取向出現，但取向較差，同時，適中的碳化溫度可得到表面平整的碳化層;相比于c _ 2h _ 2 ，以ch _ 4作為c源氣體時得到的碳化層表面平整得多;比起si （ 100 ） ，選用si （ 111 ）作為基片生長的碳化層的晶粒取向一致性明顯更好。
  6. The experimental results further demonstrate that the combination of incompatibility polydimethylsiloxane and polyacrylate by co - vulcanization improves the both compatibility and broadens the low temperature and high temperature functional region. while in sin, to improve microphase structures and damping properties, the design to increase compatibility between two compositions and modulate crosslinking density as well as relative reaction rate of two compositions, is also effective

    以上實驗結果表明，在復合橡膠阻尼材料中將聚硅氧烷與聚丙烯酸酯通過共混硫化相結合，改進了二者的相容性，拓寬了其阻尼功能區的低溫和高溫溫域；而在sin中通過改善組四川大學博士學位論文分間相容性，調節交聯密度控制其微相結構和兩種組分相對反應速度的快慢，進而控制材料阻尼性能的設計是行之有效的。
  7. The results indicated that the dimension, shape and purity of base material could meet the functional demand of solid lubricant ; the thermal decomposition temperature of ptfe resin exceeds 400 c, but organic and inorganic packing filler added in ptfe made the water absorption rate of composite material increased, melting temperature and decomposition temperature decreased, in the meanwhile oxidative decomposition reaction was accompanied ; polar groups such as c = o, c - o - c and so on in the carbon fiber surface is advantageous to increase compatibility with other components and interlayer shearing strength ; uniform design experimental method could help to find the relationship between formula and frictional property by relatively small tests. the developing trend of each formula ' s friction coefficient could be showed by fitting curve ; the friction coefficient with no copper powder or graphite in formula was relatively big. this fact showed that copper powder and graphite should be used cooperatively ; it was found that when the ratio of copper powder to graphite by weight is 15 : 60, 30 : 30 - 40 and 60 : 15 - 30 respectively, the friction coefficient was relatively small. the degree of crystallinity of pure ptfe reached maximum by air cooling and the abrasion loss also reached maximum among three ones ; at the same time, the abrasion loss of solid lubricant sample was also the biggest among three ones ; when solid lubricant matched with 45 # steel axle or gcrl5 steel axle, lubricant transfer film could be formed on metal surface, thus direct contact between the surface of metal friction pair rings was reduced. their working life was elongated extremely ; there was mainly much graphite, a little ptff, moo3, feso4, cus and so on in lubricant transfer film

    試驗結果表明：所選原料的尺寸、形狀及純度可滿足固體潤滑劑的性能要求；聚四氟乙烯樹脂熱分解溫度超過400 ，但在ptfe中加入無機填料會使復合材料吸水率提高，熔融溫度及分解溫度降低，且伴有氧化分解反應；碳纖維表面含有c = o及c - o - c等極性基團，有利於提高其與其它組分的相容性，提高層間剪切強度；均勻設計試驗方法能夠用較少的試驗次數找出配方與摩擦性能間的關系，擬合曲線基本能表示各配方的摩擦系數發展趨勢；配方中不加銅粉或不加石墨，其摩擦系數均較高，說明銅粉和石墨應該配合使用；當銅粉15份、石墨60份時，銅粉30份、石墨30 - 40份時，銅粉60 、石墨15 - 30份時，摩擦系數均具有較低值；純聚四氟乙烯樹脂在空氣冷卻時結晶度最大，磨損量也是三者中最大的；同時，固體潤滑劑試樣在空氣冷卻時的磨損量也是三者中最大的：不論是固體潤滑劑與45 #鋼軸配副或是固體潤滑劑鑲嵌入銅套后與gcr15鋼軸配副，在金屬表面均可形成潤滑轉移膜，從而減少金屬摩擦副表面間的直接接觸，大大延長其使用壽命;轉移膜中主要含有較多的石墨、少量聚四氟乙烯、 moo 。
  8. The rate of curing and consequently the rate of heat generation increase with the temperature.

    固化速度，因而還有放熱速度，都隨溫度而增加。
  9. Besides, scan rate and cycle period also affect the result ; co - deposition of dualistic oxide is a focus of research, as an element in the same group, ir is selected. deposition rate of composition is decreased by the adding of ir composition, and when the proportion of ir exceeded 50 %, composition procession can be ceased. but cooperation of ir and ru oxide can highly increase the specific capacitance of active material ; annealing treatment under a certain temperature can help to change the hydrate ru composition into mixture state ru oxide, accordingly increase the stabilization of active material

    研究表明:電解液的配製過程中，氯化釕濃度、溶液ph值、陳化時間、溶液溫度對電鍍效果均有影響，其中溶液ph值是最主要的影響因素;在儀器的使用條件探索中，理論結合實驗確定了本電鍍液體系循環伏安電勢窗的理想范圍，並發現循環伏安掃描速度和掃描周期對電鍍結果也有較大影響;混合氧化物的共沉澱是目前研究熱點，在此選用與釕同一族的銥作為共沉澱元素，銥的加入會阻礙氧化物的沉積速度，銥的比例超過50 %會使沉積作用停止，但是二元氧化物的協同作用使沉積的活性物質比容量大大提高;一定溫度下退火后處理作用會使水合釕化物轉變成混合價態的氧化釕，從而提高活性物質的穩定性。
  10. The test results showed that air temperature, air velocity and feed rate of the materials have great effect on the performance of isd, and in the range of the operational parameters of this test rig the increase of air temperature, air velocity and feed rate of the materials could improve the performance of isd

    試驗結果表明：風溫、風量和喂入量是影響乾燥效果的主要因素，在本試驗范圍內，風溫、風量和喂入量的增大有利於乾燥效果的提高。
  11. The paper analyzed the influence factors about dying properties of jujube based on experiments, determined the lowest and highest value of temperature and humidity in drying process on jujube, compared the drying rate of before and after intermission in the intermission drying process, and reached a conclusion that drying rate increase distinctly in initial drying process after intermission

    摘要以試驗為基礎分析了影響蜜棗乾燥特性的因素，確定了蜜棗乾燥過程中溫度、濕度的最高、最低界限；對間歇乾燥過程中間歇前後的乾燥速率進行了對比，得出了間歇後開始乾燥時乾燥速率明顯提高的結果。
  12. The results show that the deformation resistance is affected remarkably by both strain rate and deformation temperature, the deformation resistance decreases with the increase of temperature, and it increases with the increase of strain rate

    結果表明：變形溫度和應變速率對耐候鋼變形抗力的影響最強烈；耐候鋼的變形抗力隨變形溫度的升高而下降，隨應變速率的提高而增大。
  13. Trials to increase fruit setting rate of xuechengdongzao jujube under the conditions of high temperature and dry weather

    高溫乾旱條件下提高薛城冬棗坐果率的試驗初報
  14. The orthogonal experiment has been used to optimize the electrolyte composition and the craft parameters, with the increasing of the main salt and reducing agent concentration in the electrolyte, the electroless plating coating ’ s adhesive strength and the coverage ratio also increase ; increasing the complex agent content, the electroless plating coating ’ s adhesive strength and the coverage ratio exist the maximum value ; the electroless plating deposition rate distinctly increases when the electrolyte temperature and the ph value were increased, but the increasing of temperature and ph value affects the electrolyte ’ s stability

    採用正交實驗對鍍液成分、工藝參數進行了優化，隨著鍍液主鹽、還原劑添加量的增加，鍍層結合強度及其覆蓋面依次增強，隨著絡合劑添加量的增加，鍍層結合強度及其覆蓋面先增加然後減少，隨著鍍液溫度及其ph值的升高，化學鍍沉積速度明顯提高，但影響鍍液的穩定性。
  15. Quickly increase temperature more uniform temperature in hearth, in hearht, higher pass - rate of production

    升溫快，爐膛內溫度均勻，產品成品率高。
  16. The the generation survival rate, fecundity and population trend index attained their respective maximun values at 26. in the tested temperature range, both intrinsic rate of increase ( rm ) and finite rate of

    在5個溫度條件下，內稟增長力（ rm ）和周限增長速率（ ）均隨溫度的升高而增大，至34時最大，分別為0 . 175和1 . 191 。
  17. It can reduce the accumulation of heat and increase the rate of temperature gone up and save electric energy, improve the precision of temperature control and easy service the furnace and circuit, by an improvement on the fireproofing materials and temperature control in electric furnace of laboratory

    摘要通過對實驗室電爐的耐火材料和溫度控制的改進，可以降低爐體的蓄熱，加快升溫速度，節約電能，提高溫度控制精度，方便了爐體和電路的維修。
  18. The results show that the yield of terephthalic acid increases and the mass fraction of 4 - carboxybenzaldehyde decreases when the reflux temperature or the reaction pressure increases, or when the reflux ratio decreases, but that the combustion rate of p - xylene and acetic acid increase simultaneously

    計算表明：冷凝迴流溫度的升高、迴流比的降低和反應壓力的升高都導致反應溫度增加，雖然醋酸和對二甲苯的副反應消耗增加，但液相中對羧基苯甲醛的質量分數降低和反應收率增加。
  19. The decomposition rate of acetic acid increases, up to 99 %, with the increase of temperature, concentration of acetate acid or oxygen excessive rate and with the decrease of mass - flow

    在實驗的條件范圍，氧氣過量倍數和溫度越高，乙酸水溶液質量流量越小，乙酸的降解率也越高。
  20. It is concluded that increase of temperature in csp matrix is of great extent, and is in dependence with impact velocity, rate of deformation and thermorheologic

    分析計算表明:撞擊變形條件下粘性加熱使推進劑基體溫度顯著上升，溫度升幅與撞擊速度、剪切變形、推進劑熱流變特性密切相關。
分享友人
分享到 Line

分享到臉書