tooth gear 中文意思是什麼

tooth gear 解釋
齒輪齒輪傳動裝置
  • tooth : n （pl teeth）1 牙齒。2 齒狀突出，輪齒，鋸齒，耙齒（等）。3 嗜好。4 〈常 pl 〉（像牙齒那樣能咬人...
  • gear : n 1 【機械工程】齒輪，（齒輪）傳動裝置，齒鏈；排擋。2 〈古語〉衣服；甲胄與武器。3 傢具；財物，動...
  1. The gearing machine tool of the model y3150e is modified and a new milling head is designed to cut the envelope tooth of the pinion using allelomorph method. a assembled drawing of clamp for cutting the tooth shape of circle - arc gear is also presented

    對y3150e型滾齒機進行改造，設計出一新型的銑削頭，利用對偶法加工小齒輪的圓弧包絡線齒形；同時也給出了加工大齒輪圓弧齒形的夾具裝配圖。
  2. Study on gear tooth surface of generating spur bevel gear

    滾齒直齒圓錐齒輪齒形的研究
  3. Calibration specification for gear tooth calipers

    齒厚卡尺校準規范
  4. The main research work in the thesis is as follows : ( 1 ) base on the analysis of cutting principle and tooth geometry characteristics of klingelnberg cycloid bevel gear, the formula of tooth design calculation was verified and the equation of imaginary crown gear tooth flank was deduced by establishing appropriate coordinate system

    主要研究工作和成果有: （ 1 ）通過分析克林貝格擺線錐齒輪銑齒原理，對其部分幾何設計演算法進行了推導驗證，並建立了適當的坐標系推導了假想冠輪的齒面方程。
  5. Analyse the tooth geometry of klingelnberg cyclo - palloid spiral bevel gear., according to the relative position and kinematic relation of the cutter heads, virtual crown gear and the processed wheel blank, established the system of coordinates of the gear cutting, dedcuced the tooth face equation of the virtual crown gear, according to relations of the gear cutting and space theory of engagement, deduced the tooth face equation of klingelnberg cyclo - palloid spiral bevel gear, and drawing the three - dimensional graphs of the virutal crown gear and klingelnberg cyclo - palloid spiral bevel gear according to the design and setting parameters

    對克林貝格擺線齒錐齒輪進行齒面幾何分析。根據銑齒加工中刀盤、搖臺和輪坯的相對位置和相對運動關系建立了切齒嚙合坐標系，由矢量的旋轉推導了產形輪齒面方程;根據空間嚙合原理和切齒嚙合關系推導了被加工齒輪的齒面方程;由設計參數和銑齒調整參數計算得到齒面離散數據，繪制了產形輪和擺線齒錐齒輪的三維齒形。
  6. Analyse the klingelnberg amk855 gear milling machine. through analyse the transmission chain of the gear milling machine, analyse the transmitting principle and manufacture principle, introduce the two - - part cutter head, the process of formation of extended epicycloide and inaginary crown gear cutting principle ; overall introduce the formation of tooth face, deduce the calculation formulas of the main setting parameter of gear milling machine, and proving the correctness of the setting calculation formulas by the program of ‘ calculating of klingelnberg cyclo - palloid spiral bevel gear milling setting parameter ’

    通過剖析該機床的傳動鏈，分析了其運動原理和加工原理;介紹了雙層萬能刀盤、延伸外擺線的形成過程和假想平面產形輪切齒理論;全面介紹了齒面的形成方法，推導了銑齒機主要的調整參數的計算公式，並用「 klingelnberg擺線齒錐齒輪銑齒調整參數計算」的程序驗證了推導的公式的正確性。
  7. Analyse the tooth contact analysis of klingelnberg cyclo - palloid spiral bevel gear

    對克林貝格擺線齒錐齒輪進行齒面接觸分析。
  8. Klingelnberg cyclo - palloid spiral bevel gear has construction cramped, excellent transmission quality, low noise and loaded vehavior, it ’ s the main form of gear drives in the bevel gear ’ s technology field. it ’ s cyclo - palloid system, two - part cutter head and high power gears ( hpg ), has certain technology particular than gleason spiral bevel gear. systemic analysing the manufacture principle and meshing principle of klingelnberg cyclo - palloid spiral bevel gear, for accomplishing design theory and analysis method, for enhancement manufacture precision and loaded behavior, for promotion and applied in engineering field, have important theory value and actuality meaning. main work of the paper is tooth form emulation and tooth contact analyse of klingelnberg cyclo - palloid spiral bevel gear

    克林貝格（ klingelnberg ）延伸外擺線齒錐齒輪結構緊湊、傳動性能優良、噪聲小、承載能力高，是錐齒輪技術發展的主要齒制，其連續切削法，雙層刀盤技術和硬齒面刮削法（ hpg ）相對于格利森制齒輪有一定的技術特點。系統的分析這種齒輪的加工原理和嚙合機理，對完善其設計理論和分析方法，提高加工精度和承載能力，在工程中推廣應用具有重要的理論價值和實際意義。
  9. Tooth profiles and structural characteristic of ring gear of epicyclic drive with eccentric wheel and push rod

    偏心輪推桿行星傳動內齒圈齒廓及其結構特性研究
  10. In order to solve the problems of which the spiral bevel gear of oerlikon type is necessary to out and modify repeatedly, a new method was developed to predict the contact pattern and greatly reduce the cost for manufacturing by means of building a tooth contact analysis model of prolate epicycloids bevel and hypoid gears for oerlikon skm2

    摘要為解決奧利康錐齒輪加工過程中需要反復試切、修正的問題，根據奧利康skm2機床建立了加工延伸外擺線齒錐齒輪和準雙曲面齒輪的齒面接觸分析模型，提出了一種可預測齒面接觸質量、降低設計加工成本的新方法。
  11. Xr series rigid tooth flank helical gear units

    Xr系列斜輪硬面減速機
  12. Gs series high speed involute cylindrical gear box is hard gear side box which is according to national criteria to design and manufacture. its structure form is outside engaged straight fear, oblique tooth gear or herringbone gear of single, closed and parallel axis

    Gs系列高速漸開線圓柱齒輪箱是按照國際標準設計、生產的硬齒面齒輪箱，其結構形式為外嚙合的直齒、斜齒或人字齒結構，單級、閉式、平行軸傳動。
  13. Carry close market survey, in machine of decelerate of ceaseless and perfect combined - type solid products tastes quality while, the company is affirmatory with modular machine of decelerate of planet of gear case of machine of decelerate of hard tooth flank, large burden, high strenth and wind - force generate electricity gear case is core product, replace in order to import develop way for you, insist to specialization, homebred the way that the high - quality goods that turn makes

    通過嚴密的市場調研，在不斷完善組合式減速機實物產品質量的同時，公司確定以模塊化硬齒面減速機、大型重載齒輪箱、高強度行星減速機和風力發電齒輪箱為核心產品，以進口替代為發展方向，堅持走專業化、國產化的精品製造之路。
  14. The thesis developed the optimization design software of geometric parameter for the worm gear including strength check module, the drawing contact lines module, the change lines of tooth thickness of worm, and the parametric modelling software for the reducer which includes parametric modelling of parts and assembly. the cad prototype system is very convenient because of its accessible interfere, simple operation and written in chinese. by input design parameters ， the cad system can make optimization design and strength check for the worm gear ， draw contact lines of tooth flank of worm - gear and change line of tooth thickness of worm ， judge if the tooth flanks of worm undercut and if the sideward tooth of worm - gear hob come to a point ， make project design and structure design for the reducer and draw its 2d parts and assembly

    研究和開發了平面二次包絡環面蝸桿傳動的參數優化設計和校核軟體系統：包括幾何參數設計計算模塊，強度校核模塊，繪制齒面接觸線模塊，蝸桿齒厚變化曲線模塊和蝸桿根切判別模塊；開發了平面二次包絡環面蝸桿減速器外形與結構尺寸數據庫以及傳動效率數據庫，建立了平面二次包絡環面蝸桿傳動公差及極限偏差數據庫；開發了平面二次包絡環面蝸桿減速器參數化建模軟體：包括零部件的參數化建模模塊和裝配圖的參數化建模模塊，其中零部件的參數化建模包括蝸桿軸系的參數化建模、蝸輪軸系的參數化建模、箱體的參數化建模、端蓋的參數化建模、軸承的參數化建模和其它零部件的參數化建模軟體模塊。
  15. Gear tooth vernier calipers

    齒厚游標卡尺
  16. Gear tooth vernier callipers

    齒厚游標卡尺
  17. Xr series rigid tooth flank helical gear units variable speed machine

    Xr系列斜輪硬面減速機與無級組合
  18. With regard to the restrains of geometries boundaries of the surface, we have finished the tooth contact analyses ( tca ) and precisely drawn the actual contacting area on the surface. the relations between the total length of the actual contacting lines and the rotating angle of worm gear are also revealed in this dissertation

    為了獲得蝸輪輪齒齒面的準確描述，按共軛理論計算了蝸輪齒面的實際接武漢理工大學博士學位論文觸線，通過考慮蝸輪齒面的實際幾何約束，確定了蝸輪齒面的實際嚙合區，並運用數值方法精確計算了蝸輪齒面的邊界線。
  19. Study on mesh theory of roller oscillating tooth gear drive and numerical value simulation of tooth profile contact area

    滾柱活齒傳動的嚙合理論及齒廓接觸區數值模擬
  20. Test results show that swing movable tooth gear pump has features of large flow, good flow uniformity, good operation and low noise

    研究結果表明，活齒泵具有流量大、流量均勻性好、運行平穩、噪聲低等特點。
分享友人
分享到 Line

分享到臉書