卸載點 的英文怎麼說

中文拼音 [xièzǎidiǎn]
卸載點 英文
debarkation point
  • 卸 : 動詞1 （從運輸工具上搬下來） remove cargo or freight; unload; discharge; unlade 2 （把加在人或牲...
  • 載 : 載Ⅰ名詞（年） year : 一年半載 six to twelve months; six months to a year; 三年五載 three to five ...
  • 點 : Ⅰ名詞1 （液體的小滴） drop （of liquid） 2 （細小的痕跡） spot; dot; speck 3 （漢字的筆畫「、」）...
  • 載點 : loading point
  1. This insurance attaches as the subject - matter insured is loaded on board the oversea vessel at the port or place named herein for the commencement of the transit, continues during the ordinary course of transit and terminates as the subject - matter insured is discharged overside from the oversea vessel at the destination named herein

    本保險責任始於保險標的在載明的港口或地點為運輸裝上海船之時，在通常運送過程中持續，並終止於保險標的在載明的目的地卸離海船船舷之時。
  2. 1 this insurance attaches as the subject - matter insured is loaded on board the oversea vessel at the port or place named herein for the commencement of the transit, continues during the ordinary course of transit and terminates as the subject - matter insured is discharged overside from the oversea vessel at the destination named herein

    本保險責任始於保險標的在載明的港口或地點為運輸裝上海船之時，在通常運送過程中持續，並終止於保險標的在載明的目的地卸離海船船舷之時。
  3. In any situation whatsoever and wheresoever occurring and whether existing or anticipated before commencement of or during the voyage, which in the judgment of the carrier or the master is likely to give rise to risk of capture, seizure, detention, damage, delay or disadvantage to or loss of the ship or any part of her cargo, or to make it unsafe, imprudent, or unlawful for any reason to commence or proceed on or continue the voyage or to enter or discharge the goods at the port of discharge, or to give rise to delay or difficulty in arriving, discharging at or leaving the port of discharge or the usual or agreed place of discharge in such port, the carrier may before loading or before the commencement of the voyage, require the shipper or other person entitled thereto to take delivery of the goods at port of shipment and upon failure to do so, may warehouse the goods at the risk and expense of the goods ； or the carrier or the master, whether or not proceeding toward or entering or attempting to enter the port of discharge or reaching or attempting to reach the usual place of discharge therein or attempting to discharge the goods there, may discharge the goods into depot, lazaretto, craft, or other place ; or the ship may proceed or return, directly or indirectly, to or stop at any port or place whatsoever as the master or the carrier may consider safe or advisable under the circumstances, and discharge the goods, or any part thereof, at any such port or place ; or the carrier or the master may retain the cargo on board until the return trip or until such time as the carrier or the master thinks advisable and discharge the goods at any place whatsoever as herein provided ； or the carrier or the master may discharge and forward the goods by any means, rail, water, land, or air at the risk and expense of the goods

    四、不論任何地方任何情況，不論是在開航前或航程中存在或預料到的，只要承運人或船長認為可能有導致捕獲、扣押、沒收、損害、延誤或對船舶或其貨物不利或產生滅失，或致使起航或續航或進港或在卸貨港卸貨不安全、不適當、或非法，或致使延誤或難于抵達、卸載或離開卸貨港或該港通常或約定的卸貨地，承運人可在裝貨或開航前要求發貨人或與貨物權利有關的其他人在裝貨港口提回貨物，如要求不果，可倉儲貨物，風險和費用算在貨主頭上；承運人或船長，不論是續航至或進入或企圖進入卸貨港，或抵達或企圖抵達港口通常的卸貨地，或企圖在此卸貨，也可將貨物卸在倉庫、檢疫站、駁船，或其他地方；船舶也可續航或回航，直接或間接地，抵達或停留在船長或承運人在此情況認為安全或適當的任何港口或地點，全部或部分將貨物卸在此港口或地點；承運人或船長也可將貨物留在船上，直到回航或直到承運人或船長認為適當時將貨物卸到本合同所規定的任何地方；承運人或船長也可卸貨並將貨物用任何交通工具，經鐵路、水路、陸路、或空運轉運貨物，風險和費用算在貨主頭上。
  4. According to the characters of shimadzu electro hydraulic servo controlled fatigue testing machine and ct specimen, put forward a method based on compliance of stroke displacement which reflects the displacement of loading point at first time

    本項研究根據島津液壓伺服材料試驗機和ct試樣的特點，首次提出了基於通過測量反映加載點位移的試驗機活塞位移的卸載柔度法來測量裂紋長度。
  5. 4. flaw because the exhausting black smoke s temparature we use on spare generator is lower, granular pollutant s emmision capacity is large, and is easy to get granular pollutant jamming on channels. it will need to disassemble parts and take back to original factory for regeneration at uncertain time, and it can not improve effectively hc and co in exhaust smoke

    4 .缺點：使用於備載發電機排煙溫度較低，因此粒狀污染物排放量大，容易將粒狀污染物堵塞于通道上，須不定時拆卸回原廠再生，且無法有效改善排煙中碳氧化合物（ hc ）及一氧化碳（ co ） 。
  6. 4. flaw because the exhausting black smoke s temparature we use on spare generator is lower, granular pollutant s emmision capacity is large, and is easy to get granular pollutant jamming on channels. it will always need to disassemble parts and take back to original factory for regeneration, and it can not improve effectively hc and co in exhaust smoke

    4 .缺點：使用於備載發電機排煙溫度較低，因此粒狀污染物排放量大，容易粒狀污染物儲塞于通道上，須一時拆卸回原廠再生，且無法有效改善排煙中碳氫化合物及一氧化碳。
  7. The main work of this paper was as fellows : ( 1 ) generalized the development of pre - stressed steel structure in our nation and abroad, and pointed out the main problem in practice ; ( 2 ) presented the mechanism of pre - stressed steel structure and revealed its applicable range ; ( 3 ) established the optimization design model for pre - stressed steel structure, which accounts for constraints on stresses and displacements of structure ; ( 4 ) brought forward the optimization design method, which combined linear programming and the principle of full restriction, through which we can obtain the magnitude of each time pre - stress and the optimized sections of each members of structure ; ( 5 ) analyzed the best times of pre - stress and pointed out that 2 ~ 3 times is preferable ; ( 6 ) conducted optimization design on large - space steel roof, horizontal parallel steel truss with local cables, horizontal parallel steel truss with global cable, and ultra - static steel truss, the result of which indicated that the multiple pre - stress structure is very economic ; ( 7 ) compared different schemes of cable placement for horizontal parallel steel truss, and the results showed that the local cable only unloaded the second girders, but had no response on the first girders and stomach poles, while global cable could unload the second girders and the stomach poles outside of turning point of cable, thus proving that global cable is more economic than local - cable

    本文的主要工作是：對國內外預應力鋼結構的發展歷史及現狀作了綜述和總結，指出當前預應力鋼結構工程實踐中存在的主要問題；闡述了預應力鋼結構的受力機理，並指出預應力鋼結構的適用范圍和特點；在考慮結構應力和變位約束的條件下，建立預應力鋼結構優化設計模型；提出多次預應力鋼結構優化設計方法和步驟，採用線性規劃和滿約束準則相結合的優化方法，可優化設計出施加的每一級預應力的大小，並得到結構各部分的優化截面；對多次預應力最佳的施加次數作了分析，並建議以2 3次為宜；為驗證文中理論和方法，分別對大跨多次預應力鋼屋架、局部布索的水平平行弦鋼桁架、整體布索的水平平行弦鋼桁架和局部布索的超靜定鋼桁架等算例進行了優化設計，經濟效益明顯；對水平平行弦鋼桁架的幾種施加預應力的方案進行比較，對于局部布索，預應力只對下弦起到卸載作用，對上弦和腹桿基本不起作用；而整體布索預應力除對下弦卸載外，對索折點以外部分腹桿也起到卸載作用，經濟效益好於局部布索。
  8. Article 91 if, due to force majeure or any other causes not attributable to the fault of the carrier or the shipper, the ship could not discharge its goods at the port of destination as provided for in the contract of carriage, unless the contract provides otherwise, the master shall be entitled to discharge the goods at a safe port or place near the port of destination and the contract of carriage shall be deemed to have been fulfilled

    第九十一條因不可抗力或者其他不能歸責于承運人和托運人的原因致使船舶不能在合同約定的目的港卸貨的，除合同另有約定外，船長有權將貨物在目港鄰近的安全港口或者地點卸載，視為已經履行合同。
  9. On the basis of the research by former people, the work of this paper includes several aspects as follow : throughout a great deal of experiment of the mechanics performance of 2d weave c / sic composite materials laminated plate, we simulated the nonlinear relationship between a and e in the tensile course ; and we inspected the original damages and the damages evolvement ; and we made the statistic analyses of the tensile strength. some important conclusions have been given in the paper

    主要有以下幾個方面：在大量二維編織c sic復合材料力學常規性能的實驗基礎上得到了拉伸實驗中卸載點和卸載模量，卸載模量和加載斜率，加載斜率和應力等之間的關系，並在此基礎上得到了模擬同種材料拉伸曲線的非線性的應力?應變關系；配合我們的實驗過程進行初始損傷和缺陷的檢測以及實驗過程中材料損傷演化過程的動態無損檢測；對我們現有的二維編織c sic復合材料拉伸強度數據進行了分佈擬合。
  10. On shutdown, heartbeat will first stop the application servers, then the node agent, then the deployment manager, then un - mount the shared filesystem, and finally give up the ip

    在停止時， heartbeat將首先停止應用服務器，再停止節點代理、部署管理器，然後卸載共享文件系統，最後釋放ip 。
  11. That is, the partially penetrating sand drain ground is viewed as the double - layered ground, and its consolidation is analyzed with 1 - d consolidation theory, through the transformation from 3 - d consolidation to 1 - d consolidation in the region of sand drain. this can overcome the disadvantage that the excess pore water is discontinuous between the region of sand drain and under - lying soft layer. to the double - layered ground, based on the consolidation mechanism under surcharge, the excess pore water pressure calculation formula is deduced under the condition of multilevel equably loading or unloading, which perfects the consolidation theory

    然後，在充分考慮豎井區井阻、塗抹作用以及土體結構損傷破壞對固結影響的基礎上，將未打穿豎井地基合理地轉化為雙層地基，按一維固結理論計算，克服了傳統固結計算方法在豎井處理區與下臥層交界面處存在孔壓間斷的缺點；在此基礎上，從超載預壓法的基本原理出發，分析了雙層地基超載預壓固結、沉降機理，推導了多級等速加、卸載情況下雙層地基的固結計算公式，進一步完善了雙層地基固結理論。
  12. Select uninstall and click on next

    選擇卸載並點擊下一步
  13. 11 transport of dredged materials ( not used as filling materials for the projects ) shall be by water tight trucks / vessels to the marine barging points or designated marine disposal grounds

    應使用有防水設備保護的貨車/船舶把挖掘出的物料（工程項目未有用作填料者）運往海上載駁點或指定的海上卸泥場。
  14. Because operating system firewall is implemented as a linux loadable module, this system differs from other secure operating system in that this system does not modify linux kernel source codes directly and this system is prone to expand, so this system has the strong points : easy to upgrade 、 flexible to load and fine expansibility

    由於操作系統級防火墻是作為一個linux可卸載內核模塊來實現，因此本系統區別于其他安全操作系統之處在於本系統不直接修改內核源代碼並且易於擴展，具有方便升級加載卸載靈活、良好的可擴展性等優點。
  15. In the paper, the theory of access control 、 the concept of system call 、 the mechanism of loadable module and multiple security strategy framework - - gfac are introduced in emphasis. the paper also introduce particularly the architecture 、 function components 、 design and implementation of operating system firework and its each component " design and implementation

    論文重點介紹了訪問控制的理論、系統調用的概念、可卸載內核模塊的機制以及多安全策略支持框架gfac ；並詳細闡述了操作系統級防火墻的體系結構、各個功能模塊、設計與實現以及操作系統級防火墻各個組件的設計與實現。
  16. In the fourth field. to verify it works, insert a cd and try running mount cdrom this will mount the cd to the mount point ls - alf cdrom this should show the cd s root directory umount cdrom this will unmount the cd

    Mount cdrom這樣將會將這張cd掛載在該掛載點上ls - alf cdrom這樣將會列出cd的根目錄umount cdrom這樣將會卸載這張cd
  17. These two statements set the function pointers for entry points elsewhere in the driver. i elected to give them simple names indicative of their function : driverunload and adddevice

    在驅動中別的地方，這兩個聲明為入口點設置函數指示器。我建議給它們起簡單的名字來指示它們的函數：驅動卸載和添加設備。
  18. ( 5 ) another is the long - term predict utilizing the biggest index number lyapunov in the chaotic time series and the whole space method during the steady period of the road foundation load, after the overload of the road foundation finished. meanwhile, contrasts with some mature settlement predict methods, estimating some important section in the engineering synthetically, making sure an ideal outcome of the predict warp, then unload the overload of road foundation and make it satisfy the design request

    （ 5 ）路基超載完成後，在路基荷載穩定期間內，利用混沌時間序列中的最大lyapunov指數和全域法進行長期預測，同時與一些比較成熟的變形預測方法進行對比，對工程中一些重點斷面進行綜合評判，確定一個較理想的預測結果，從而對路基超載進行卸載，使其滿足工程設計要求。
  19. Considering the behaviors of unbonded prestressed concrete beams and steel reinforced concrete columns, a kind of nonconforming beam - column element was constructed and the analysis precision was improved. loading and reloading paths were introduced into the constitutive relationship of concrete. it is helpful to the analysis program to trace the full - range mechanical behavior of structures including the descending part and the hysterisis characteristic under cyclic loading

    考慮無粘結預應力混凝土梁、型鋼混凝土柱等結構構件的受力特點，構造非協調樑柱單元，提高了分析精度；混凝土的本構關系中，引入卸載路徑和再加載路徑，使得分析程序可以追蹤包括下降段在內的結構全過程力學行為，以及反復荷載下結構的滯回特性。
  20. Electric connectors - temperature life with mechanical loading for connectors with removable contacts static mechanical load at temperature

    電連接器.有可拆卸觸點的連接器的機械荷載溫度壽命
分享友人
分享到 Line

分享到臉書