有效誤差 的英文怎麼說

中文拼音 [yǒuxiàowùchā]
有效誤差 英文
effective error
  • 有 : 有副詞[書面語] （表示整數之外再加零數）: 30 有 5 thirty-five; 10 有 5年 fifteen years
  • 效 : Ⅰ名詞（效果; 功用） effect; efficiency; result Ⅱ動詞1 （仿效） imitate; follow the example of 2 ...
  • 誤 : Ⅰ名詞（錯誤） mistake; error Ⅱ動詞1 （弄錯） mistake; misunderstand 2 （耽誤） miss 3 （使受損害...
  • 差 : 差Ⅰ名詞1 （不相同; 不相合） difference; dissimilarity 2 （差錯） mistake 3 [數學] （差數） differ...
  • 有效 : effective; valid; efficacious
  • 誤差 : error
  1. Emphatically, this paper discusses the pattern of signal and antenna radiation of the system, the design principles and technologies of audio - generator and monitor, and the modification of measurement deviation. through special tests and aviate experiments, it has been proved that the performance of the domesticalized system is better than of the initial system

    文中重點分析了俄制分米波儀表著陸系統的信號格式和天線輻射場型，著重闡述了系統中音頻信號產生器和監測器的設計原理和實現技術，對信號檢測中的測量誤差進行了分析並設計了有效的修正方法。
  2. In this paper, the relation between differential driven ratio accuracy and the common normal length error of cylindrical bevel wheel has been found by experimental method, which provides a efficient way for cylindrical bevel wheel manufacturer to control the common normal length error of the wheel

    摘要通過實驗研究，尋找出差動傳動比的精度與斜齒圓柱齒輪的公法線長度誤差的關系，從而為斜齒圓柱齒輪的加工提供一個可以控制斜齒圓柱齒輪公發線長度誤差的有效方法。
  3. The gravity analysis is carried out especially for the synthetic fused silica and calcium fluoride used in 193nm lithographic objective as well as the optical elements with structural sizes of ( 200mm ~ ( 300mm. large numbers of analysis data for surface shape error are obtained by using algor finite element analysis software. then these data are plotted into curves and comparison analysis will be carried out, finally the measures and schemes for reducing gravity deformation are proposed

    因此，本論文重點對大口徑光學系統在高精度光學鏡頭裝校中，因重力變形進行了詳細的分析研究，特別針對193nm光刻物鏡系統所使用的材料sytheticfusedsilica和caleiumfluoride以及用到的結構尺寸200mm ~ 300mm光學零件進行了重力變形分析，使用algor有限元分析軟體獲得了大量的面形誤差分析數據，然後將這些數據繪成曲線進行對比分析，最後提出了減小重力變形的措施與方案，並進行了實驗，驗證了分析結果是正確的，減小重力變形的方法是有效的。
  4. Finally, this thesis discussed these following questions : first, the algorithm of used the error image for improving the purpose of the edge detection. secondly, we have transformed the solved question of the first and the second directional derivative to frequency domain and founded they have a single formulae in frequency domain. thirdly, we have described the singular signal and the noise by using the correlations of the neighbor data after wavelet transform

    最後，在傳統的邊緣檢測演算法和小波分析的邊緣檢測演算法之外，對以下幾個方面也進行了一些討論： 1 ）利用誤差圖像來提高邊緣檢測效果的演算法； 2 ）將求解任意方向的一階、二階方向導數的問題轉換到頻域中去求解，發現在頻域中它們具有簡單易用的公式，使得原來求解任意方向的一階、二階導數的比較困難的問題變得容易實現了。
  5. At first, this paper analyzes the factors of water - sand influencing water level of yellow river and the feasibility just using the factors of water - sand to study water level, and collects the corresponding data ; secondly, because there are strong nonlinear relation in the corresponding data, by meticulous theory analysis, this paper integrates basic nonlinear analysis method, theory of random analysis, method of least squares and so on. it puts forward a method which can get the high accuracy simulation of the data, perfects the multi - factor analysis of variable ( over three factors ) of the statistic ; thirdly, it applies the method to the approximation of corresponding water level process which belong to the capacity of sand of middle - high and middle - low, and get the high - accuracy simulation about the typical nonlinear relation ; at last, this paper definitudes the main influence mode that the capacity of sand. it mainly unite with other factors to work on the water level in the yellow river lower reaches ; mor eover, this paper analyzes the difficult point and the direction of improvement to realize the accuracy forecasting of the flood level of erodible - bed channel

    首先，系統分析了影響黃河水位的水沙因素，及僅用水沙因素有效研究水位的可行性，並按變量對應思想採集它們的相應數據；其次，由於相應水位過程數據中含極強的非線性關系，本論文經細致的理論分析，將基本的非線性分析方法、統計建模方法、隨機分析理論、最小均方誤差原則等等數學理論及方法有機揉合，提出了能有效實現這類數據高精度擬合的分層篩選法，並改進了統計學中多因子（三個以上）方差分析法；再次，將這一方法用於黃河中高及中低含沙類洪水相應水位過程的擬合，實現了這一典型非線性關系的高精度擬合，各年汛期上下游相應洪水位過程的擬合誤差都較小；最後，明確黃河下游含沙量對水位的主要影響方式，即含沙量主要是與其它因素聯合對水位作用；另外分析了要實現變動河床洪水位過程準確預報的困難所在及改進方向。
  6. The mathematical statistics method and extrema variance clustering method can be used to visible automatic classifying and reading of logging curves. the lithofacies classifying program basing on multi - mineral model analysis presents a new method to analyze logging - facies and more accuracy and visualized logging facies section can be reached by using this method. in addition, it supplies reliable lithologic layering reference for search and evaluation of oil / gas caprock and it also made up for the high cost of core - drilling and the inaccuration between lithic fragment description and depth

    採用基於「數理統計-極值方差聚類法」的面向對象可視化操作方法可有效地解決測井曲線的可視化自動分層取值問題；而基於多礦物模型分析的巖相劃分程序又提供了一種新的測井相分析方法，能得到更為準確直觀的測井相剖面，為尋找和評價油氣蓋層提供了可靠的巖性分層依據，同時彌補了鉆井取心費用高和錄井巖屑描述與深度有誤差的缺陷。
  7. The iterative learning control has been raised as a new control concept. by correcting the current control command using the previous system error data instead of the exact system parameters, iterative learning control can effectively suppress the vibration of the highly periodic system

    迭代學習控制不需知道系統的具體動力學參數，只要系統運動具有一定周期性，它便能利用系統先前的控制經驗和輸出誤差來修正當前的控制信息，從而達到良好的控制效果。
  8. The first algorithm is low precise but simple and credible, the second is high precise but complex and incredible. 4 ) developed four kinds of methods aimed to improve precision and credibility of navigation system. the first is parallel sandia inertia terrain - aided navigation ( psitan ) ; the second is tercom + sitan, it can restrain two important disadvantages of sitan ; the third is particle filter - based terrain - aided navigation ( pftan ), the particle filter can reduce the error of navigation ; the last is tercom + pftan, where tercom is looked as monitor to ensure the credibility of navigation system

    採用并行sitan方法來提高導航精度，並克服奇異值問題；提出了tercom + sitan方法，綜合利用兩者的優點，在保持sitan導航精度的前提下，有效地克服了sitan的兩個缺點；提出了一種基於連續蒙特卡洛濾波（常被稱為particlefilter ）的地形匹配演算法（ pftan ） ，有效地克服了利用sitan時由於地形隨機線性化帶來的誤差，使導航精度有較大的提高；提出了tercom作為監視器的地形輔助導航思想，並將其應用到連續蒙特卡洛方法上，較大地增加了系統的可靠性和精度。
  9. In this system, the movement of the step - electromotor is controlled by computer, and then the dial pointer is drove by the step - electromotor. at the same time, these images of the analog instrument are took by high precision ccd video, and then these images will be processed by the computer, using some image - processing algorithms such as image segmentations, threshold identification, image binarization, areas labeling, dial center - point identification, useful areas identification & abstracting, and areas thinning, etc. followed this, the dial pointer of the “ circle ” is able to be located. at last, the dial pointer position will be recognized by the computer

    本系統由計算機控制步進電動機的運動，進而驅動指針式儀表表針的運動，並且通過高精度ccd攝像機實時獲取表盤圖像數據，同時進行表盤圖像的相關處理，包括圖像分割，閾值確定，圖像二值化，區域標記演算法，圓心擬合，有效區域識別提取，區域細化等，最終快速識別出表盤指針所處位置;最後，根據國家指針式儀表類檢定規程所制定的演算法計算出該儀表的相關誤差，檢定指針式儀表的各種精度，通過這些數據判斷該儀表是否合格，列印該儀表的檢定結果報表。
  10. In general, a precise resistor is in series with one of the resistors in wheatstone bridge to compensate the zero offset, and the other one is in parallel with another arm of the wheatstone bridge to compensate thermal zero drift. based on this principle, in this paper, a compensation method based on virtual instrument technology has been put forward. actuated by current source, a good calculation method of compensation resistors and their position in the bridge is deduced

    本文基於串並聯電阻補償法的原理，提出了一種基於虛擬儀器的誤差補償方案，推導了在恆流源供電下可以精確的計算出補償電阻大小和補償位置的演算法，並且在虛擬儀器軟體平臺labview上完成了數據採集、處理、顯示等軟體的設計，經過實驗的驗證，對傳感器的零點溫度漂移補償取得較好的效果，而對靈敏度溫度漂移的工藝補償亦有一定的效果。
  11. Both two methods require a good binary image, if there exist concave, the aggregated objects will be segmented and recognized correctly and the error is lower, otherwise, it may give err result. considering the edge information will give robust segmentation, but the information may contain noise when the object is strongly non - uniformity and the speed decreases

    該演算法對圖像的二值化效果要求較高，當物體間的縫隙在二值化后能部分或全部判定為背景，即粘連的物體在二值化后能有明顯的凹陷時，識別率很高，誤差幾乎可以為零。
  12. Therefore, a model of three sectors, respectively referring to domestic sector, manufacturing export sector and primary product export sector, has been established here to measure the technology spillover effects of export on domestic sector. finally, based on a broader framework, this dissertation went on to investigate the relationship between openness and china ' s economic growth, while the result shows that though there exists a notable dispute about how to measure the degree of china ' s openness, the index of trade dependence still maintains the better one to reflect china ' s economic openness. in the meanwhile, impulse response function ( irf ) method and forecasting errors variance decomposition ( fevd ) method, both of which are based on the vector auto - regression ( var ) system, are used here to investigate the dynamic relationship between openness and china ' s economic growth

    與傳統理論不同，新增長理論和新貿易理論都強調技術進步的作用，因此本文構建了一個三部門的技術外溢效應模型（國內部門、工業製成品出口部門以及初級產品出口部門） ，考察了工業製成品出口和初級產品出口對國內非出口部門不同的技術外溢效應；第四，從更加廣闊的視野就貿易開放度與中國經濟增長問題進行研究，有關貿易開放度如何度量一直是存在較大爭議的問題，本文首先對該類研究文獻進行了較為詳盡的述評，然後運用生產函數方法對所選取的5個貿易開放度度量指標進行了檢驗，結果發現盡管一些已有研究認為外貿依存度無法真實度量一國經濟開放水平，但是本文研究結果表明外貿依存度仍是度量我國貿易開放度的較好指標，進一步採用基於var系統的脈沖響應函數法以及預測誤差方法分解法對貿易開放促進經濟增長的作用進行了動態刻畫。
  13. Besides, the information on actual height of lowest cloud base is used in constructing of cloud liquid water profile by using radiosonde profiles, that makes an improvement of relative accuracy of retrieved value of l at almost all altitudes by 5 - 20 % according to numerical simulation comparison. the lower the altitude is, the more the accuracy is improved

    為減少由於回歸樣本中雲液水廓線的『失真』給反演造成的誤差，本文在對探空廓線作診斷建立雲液水廓線時，引入了實際目測的最低雲底高的信息。數值模擬比較表明該措施行之有效，使對流層中下層的幾乎所有高度上l反演值的精度提高5 - 20 ，觀測高度越低，精度提高越多。
  14. During the instantaneous frequency estimation of lfm, there exists some error in the edge, so in the dissertation, a fitting method is proposed to modify it. from the computer simulation, the following result is obtained : for cw, the method based on cwt is most effective, and with the snr rising, the error curve of it is more and more closer to crb. for lfm, the method based on wvd gives the best result, and the effects of cwt and stft are similar for multi - component signal, compared to stft and wvd, cwt is a better choice

    通過模擬發現，在單頻回波的瞬時頻率估計中，基於cwt的方法最為有效，隨著信噪比的提高，其均方誤差曲線越來越接近克拉美?羅界；在線性調頻回波的瞬時頻率估計中， wvd法得到的效果最好，而cwt與stft法的估計效果比較接近；在多分量信號的瞬時頻率估計中，相對于stft和wvd法， cwt法是一個更好的選擇。
  15. The dissertation is mainly including four section : the first is the experiments done in the tank, which will supply the reliable information of imaging data ; the second is image edge detection by the use of the art of the zernkie moments, which is used to detect the liner and threaded edge of the object, the third is the underwater camera calibration technique, the forth is automatic positioning the location of the camera by used of the art of cross - ratio, the result of which is satisfied

    本文工作分為四個部分：第一部分是水槽實驗部分，它為后續的工作提供了可靠的圖像數據信息；第二部分是基於zom距的直線、曲線邊緣提取技術及相關的與處理技術；第三部分，水下攝像機標定技術研究，基於改進的tsai演算法，採用逐步分解的標定策略。並探討了一種相對簡單的、靈活的標定技術；第四部分是攝像機定位技術研究，採用具有平移不變性的交比進行攝像機定位，模擬試驗的最大誤差不超過2 ，效果還是令人滿意的。
  16. Our demagnetizer is compact and simply, easy to operate and mainly apply for adjusting the precision error of speedometer which works by magnet response. this product has good effect when you use

    公司製造的退磁器結構簡單輕巧，操作方便，用於校正磁感應車轉速里程錶的車素指示精度誤差，具有很好的使用效果。
  17. Firstly, the paper retrospects the development of eso and tries to probe into the theoretical field : the explanation of it ' s definition, the conclusion of it ' s characters, the comparison of eso and other stock inspiration system, followed by the analysis of it ' s theoretical basis and incentive effect ; meanwhile, the paper probes into the realistic situations of eso in usa and china in order to seek the regulation and draw the advantages and disadvantages ; to this part, the paper takes the following four items as the main barriers to eso ' s implementation in china : the over restriction of current law system, the low efficiency of the market, the poor corporate governance structure and a lack of a reasonable performance index system, and elaborately analyze the impacts of the obstacles on eso ; after the analysis made above, the paper gets down to taking some methods to solve the problems in accordance with the characteristic of the barriers. as far as the internal defects of the mechanism are concerned, the paper begins with the scientifically design of the key components, studying the aspects of bestowal, change, loss, the executive method and the executive time. then the paper focuses on designing a performance index system which is an essential part of eso, introducing the bsc to improve the present performance index system, under the reasonable guidelines resigning it at both the levels of company ' s and employee ' s levels. finally, as regards how to perfect the outside surrounding of eso, the thesis makes some suggestion

    本文首先回顧了股票期權制在國內外的發展及較為詳盡的分析了股票期權制度的相關理論：闡述了其涵義，特徵，理論基礎，激勵效應並於其他幾個較易混淆的股權激勵機製作逐一的比較，以進一步澄清人們對其的錯誤認識；同時，對股票期權制在美國和我國的現狀進行深入的實證研究，探求其內在規律，在肯定其成果時指出其不足；至此，筆者認為，我國上市公司要推行股票期權制度將主要面臨以下四類障礙：公司治理結構不完善、市場有效性差、現行法規體系不完善及缺乏客觀的業績考評指標體系，並詳細分析了各類障礙的現狀及對股票期權制的負面影響；在此基礎上，針對各類障礙的不同性質，著手探討消除這些障礙的措施：對于股票期權制內部的缺陷，本文先對各個關鍵要素進行科學設計，系統的剖析了贈與、變更、喪失、執行方式、股票來源等技術性問題，再以大量篇幅研究了如何構建出一套與實施股票期權制相配套的業績考核指標體系，引進平衡計分卡的思想對國內現有的指標體系加以改進，以一組合理的評價原則為指導，從公司及員工個人業績考評兩個層面上來設計該指標體系。
  18. The standard rejection sampling method which is introduced in chapter 2 is closely related to the problem of quasi - monte carlo integration of characteristic functions, whose accuracy may be lost due to the discontinuity of the characteristic functions

    第2章介紹的標準拒絕抽樣方法其實跟特徵函數的蒙特卡羅積分有密切的關系。而由於特徵函數的不連續性，蒙特卡羅積分應有的誤差精度就達不到，拒絕抽樣的效果也就受到影響。
  19. 1. each kind of averaged load unit of planetary - gear transmission is described in this paper. equivalent error of the averaged load component of four - planet - gear transmission is analyzed for first time as well as the affection of the manufacturing error of elementary component to the displacement of the averaged load component

    本文的主要研究工作有： 1 .對各種類型的均載機構進行了比較；首次分析了4行星輪機構的均載構件等效誤差，分析了安裝和製造誤差及其對均載構件均載位移量的影響。
  20. At first, the fundamental principles on wavelet transform ( wt ) and its reconstruction, specially on one - dimension cwt, binary discrete a, # cwt and their reconstruction, are provided. next, the principles on vlsi realization of one - dimension cwt are expounded, and the relevant methods of the implementation are classified and compared with each other. a systematic algorithm for approximating the wavelet function and a example of calculation are gived. it is demonstrated by the example that the algorithm is simple, effective, low erroneous and can be applied to approximating the wavelet function with analytic expression or equal interval samples in time - domain

    論文介紹了小波變換特別是一維連續小波變換和二進離散，柵格下的連續小波變換與重構的基本原理；闡述了小波變換vlsi實現的原理，並對相關的實現方法進行了分類和比較；提出了一種系統地逼近小波函數的演算法，並給出了計算實例；計算結果表明，該演算法簡單、有效、誤差小且適合於逼近具有時域解析表達式或給定了等時間間隔時域樣點值的小波函數。
分享友人
分享到 Line

分享到臉書