有用尺寸 的英文怎麼說

中文拼音 [yǒuyòngchǐcùn]
有用尺寸 英文
usable size
  • 有 : 有副詞[書面語] （表示整數之外再加零數）: 30 有 5 thirty-five; 10 有 5年 fifteen years
  • 用 : Ⅰ動詞1 （使用） use; employ; apply 2 （多用於否定: 需要） need 3 （敬辭: 吃; 喝） eat; drink Ⅱ名...
  • 尺 : 尺名詞[音樂] （中國民族音樂音階上的一級 樂譜上用做記音符號 參看「工尺」） a note of the scale in ...
  • 寸 : Ⅰ量詞（長度單位） cun a unit of length （=1/3 decimetre）Ⅱ形容詞（極短或極小） very little; very ...
  • 有用 : useful; serviceable
  1. Papers also points out that the size of the adscititious powder agglomerate enwrapped by pure al melt, the effect and intensity of stirring shear force and the melt temperature at the beginning of reaction between the adscititious powder and al melt are the main factors affecting the in - situ reaction ongoing velocity

    並指出了影響反應進行速度的主要因素是熔體中分散包裹的加入粉末團的尺寸大小、有無攪拌剪切力作用、反應進行時的熔體溫度。其中，粉末團尺寸大小與徹底完成反應所需時間的關系最大，大尺寸粉末團將大大延長反應時間。
  2. The gravity analysis is carried out especially for the synthetic fused silica and calcium fluoride used in 193nm lithographic objective as well as the optical elements with structural sizes of ( 200mm ~ ( 300mm. large numbers of analysis data for surface shape error are obtained by using algor finite element analysis software. then these data are plotted into curves and comparison analysis will be carried out, finally the measures and schemes for reducing gravity deformation are proposed

    因此，本論文重點對大口徑光學系統在高精度光學鏡頭裝校中，因重力變形進行了詳細的分析研究，特別針對193nm光刻物鏡系統所使用的材料sytheticfusedsilica和caleiumfluoride以及用到的結構尺寸200mm ~ 300mm光學零件進行了重力變形分析，使用algor有限元分析軟體獲得了大量的面形誤差分析數據，然後將這些數據繪成曲線進行對比分析，最後提出了減小重力變形的措施與方案，並進行了實驗，驗證了分析結果是正確的，減小重力變形的方法是有效的。
  3. The author wish this study win be used in the development of numerical control dividing lathe that can divide into groups of the size for precise measure of thickness of ompressor carboy hatch soft shim the system of pneumatic measure applied widely for component measurement in produce process in factory. the author 100kup a large number related documents over about one and half year for research and went to factory and related research institute for investigating

    並希望將這一研究結果應用於對「壓縮機缸蓋軟體墊片」厚度尺寸精密測量分組的數控分選機的研製。氣動測量系統以其測量倍率高、測量精度高、測量力小（ 0 . 05 1n ） 、對被測工件有自潔作用、測量精度保持性好、抗干擾能力強等優點而被廣泛應用於工廠生產過程中的零件檢測。
  4. As a new component of sensor, fiber grating have many instinctive advantages, such as light in weight, anti - cauterization, anti - interference in electromagnetism, high - sensitivity and compaction in construction. it is very easy to be coupled with fibers and the coupling - loss is slight. using fiber grating ’ s character of sensitivity for stress ; people have done some envelope experiments on structural systems ( such as storied buildings, bridge, railway and dam )

    光纖光柵傳感器除了具有重量輕、耐腐蝕、抗電磁干擾、靈敏度高、結構緊湊等優點外，還有其獨特的優越性，如探頭尺寸小，其直徑與光纖等同;易於與光纖耦合，耦合損耗小;波長調制型，抗干擾能力強;集傳感與傳輸於一體且具有極強的復用能力，易於構成傳感網路;測量對象廣泛，易於實現多參數傳感測量等等。
  5. Fluid noise mainly comes from out put pulsation of rate of flow, the main reason of out put pulsation of rate of flow is the instant high pressure return flow that obturation cubage produced when the big round curve pressure transition. the v trough on the port plate can reduce the fluid noise. in this paper, the author based on the acting of dam a river and condensability of liquid and used matlab language as tool to calculate the v trough on the original port plate and drew out the p - t diagrammatic curve and analyzed its shortcoming and improved the design of original v trough and got that the best size of its angle was 12. 3 and its length was 5mm and the cross section was an equilateral triangle

    流體噪聲主要來源於輸出流量脈動，造成輸出流量脈動的主要原因是閉死容積在大圓弧段壓力切換時產生的瞬時高壓迴流，在配流盤上開設v型尖槽可降低因高壓迴流而引起的流體噪聲，本文以截流作用和液體的可壓縮性為理論依據，以matlab語言為工具，對原配流盤上的v型尖槽進行了理論計算，繪制出p - t圖線，分析了它的不足，並對原有v型尖槽進行了優化設計，得出了v型尖槽的最佳幾何尺寸：配流盤平面上的v型尖槽的兩邊的夾角為12 . 3 ，槽長5mm ，槽的橫截面為等邊三角形。
  6. Nanoparticles, alkylated nanoparticles and composited nanoparticles have different influence on the microcrystalline size of crystallizable polymer ( i. e., pp and pe )

    通過xrd測試我們發現，納米粒子、烷基化納米粒子和復合納米粒子對結晶型聚合物（ pe和pp ）的微晶尺寸有著不同的作用。
  7. Lc apparatus almost meet all the needs of space optical communication such as weight, size, power consume, life, cost, driving voltage, intergration of optics and electricity, programe, optically take ? over aperture, beam scanning, deflexional range and so on. switches, deflexional facilities and scanning equipments which made with lc have been used in the system of labor in space communication. the only bug of lc apparatus is that their answer speed only get microsecond rate or submicrosecond rate. but it is practical for them to be used in special beam capture, scan, deflexion controling which don ’ t concerned with code rate and code type

    液晶器件幾乎滿足空間光通信的所有大的指標要求如重量、尺寸、功耗、壽命、成本、驅動電壓、光電集成、可編程性、光學接收孔徑、光束掃描和偏轉范圍等等。液晶光開關、光偏轉器、光掃描器已經開始應用於光纖通信的實驗系統中。液晶類器件應用於光通信的唯一重大缺陷，是其響應速度目前只能達到微秒級或亞微秒級，不過，在不涉及到碼型碼率的空間光束捕獲、掃描、偏轉、控制方面，液晶器件完全可能進入實用化。
  8. As an advanced materials preparation technology, spray - deposition has shown remarkable superiority in producing large - sized alloys and metal matrix composites. however, the spray deposeted preforms usually contain a certain quantity of porosity. besides, the oxide films on the surface of the particles lead to week metallurgic conjunction between the particles. in order to obtain an ideal structure and performance, the porous preforms need further densifying and plastical forming. in this paper, a new technology named wedge pressing was used to densify spray - deposeted 5a06 aluminium alloy, in which the large deformation can be obtained through the sum - up of local deformation and multi - step small deformation. this method can also solved the problems in traditional processing and greatly decreased the producing cost. what ’ s more, the reserch on the wedge pressing desification rules about the large - sized spray deposeted preforms was significant it was vital not only to the further densification of the prefoums but also to the further research on plastical deforming the research was also benefit to the industrialization an the application of the spray deposeted porous materials

    坩堝移動式噴射沉積技術作為一種先進的材料制備新技術，在制備大尺寸合金及金屬基復合材料方面具有顯著的優越性。然而噴射沉積坯件特別是大型坯件通常存在一定量的孔隙，顆粒表面存在一定量的氧化膜，顆粒之間未能完全達到良好的冶金結合狀態，因此需要進行后續緻密化和塑性變形才能獲得理想的組織和性能。本文採用一種新型的楔形壓制工藝，即通過局部變形、多道次小變形累積實現大變形的緻密化加工方法，對噴射沉積多孔坯料進行后續緻密化和塑性變形，很好地解決了傳統加工工藝的難題，大大降低了生產成本。
  9. For electrodeposition by dc methods, the metals deposite uninterrupted and the particles were also embeded uninterrupted into the coatings ; for electrodeposition by pc method, the particles with biggish volume were desorbed from the coatings and returned to the electrolyte again owing to the presence of pulse interval ; for electrodeposition by prc method, the particles carried positive charges are much more easy to desorb from the coatings owing to the effecf of reverse pulse current combined with pulse interval, in addition, the reverse pulse current also could dissovle the metals, further accelerates the desorption of particles, thus the particles size embeded in the coatings by prc method is the least

    直流電沉積時，基質金屬的沉積連續進行，粒子在電極表面不間斷嵌入鍍層;單脈沖電沉積由於脈沖間歇的存在使得具有較大體積的粒子會脫附，重新回到溶液中;採用周期換向脈沖時，反向脈沖電流使表面荷正電的較大的粒子更易從電極表面脫附，同時，反向脈沖電流對基質金屬的溶解作用，也會促進粒子的脫附，因此鍍層中復合粒子尺寸最小。隨著鍍層中粒子復合量的增加，三種鍍層的晶粒都明顯細化，說明al _ 2o _ 3的存在阻止了晶粒的長大，提高了電沉積過程中晶核的形成速率。
  10. In the system, the collimation semiconductor laser - scanned beam scanning two perpendiculars direct of one plane of the measured workpiece at the same time is made. the beams with the dimension information of two perpendiculars direct are processed by the scanning receive system, the high - speed photoelectric transition and electronic data process. two measured results of the diametric directs and ellipse tolerance, etc, parameter, of the turning workpiece on the same plane are obtained by non - contact automatic measurement

    在單向激光掃描檢測技術的基礎之上，提出了一種雙向激光掃描檢測系統，其採用激光掃描檢測技術與特殊光學系統相結合，用準直半導體激光掃描光束對被測工件徑向某一截面的兩個相互垂直方向同時掃描，經掃描接收光學系統、高速光電變換、電子學系統和微機數據處理系統，對將攜帶有垂直方向被測量信息的光束進行處理，實現了回轉體工件同一截面兩個垂直方向的徑向尺寸和橢圓度等參數的非接觸自動測量，解決了同時非接觸測量回轉體零件同一截面兩個徑向尺寸的難題，它具有高速，高精度和非接觸自動測量等特點。
  11. Finally, considering the request of the gfrp bars reinforced furan resin concrete electrobath, we designed the structure of the electrobath and use finite element method to analyse it. in the process, pre - stress also was considered. the result of use in practice indicate the properties of gfrp bars can meet the request of electrobath structure

    最後結合玻璃鋼筋呋喃樹脂混凝土電解槽的設計與開發，對電解槽的配筋布置、結構尺寸進行了設計，用有限元方法對電解槽的整體結構進行了計算分析，並考慮了玻璃鋼筋預應力的影響，其設計計算結果已在玻璃鋼筋呋喃樹脂混凝土電解槽的實際生產中得到了應用，且使用情況良好。
  12. Because of the interaction of urushiol chains and cus, the transformation temperature tg of hybrid - epu / cus was higher than that of epu. heat stability and solvent resistance were also improved. the interaction and network of urushiol chains were efficiency to inhibit the dimension of cus nanoparticles

    漆酚鏈段與cus之間的作用，以及漆酚交聯網路的存在可有效阻止cus顆粒尺寸的增大，但漆酚交聯網路產生的空間位阻也在一定程度上降低了sz 」的擴散。
  13. By making some assumptions, collision frequency were presented. then the the flocculation kinetics model was established through population balance equation. comparison of experimental data and modeling results indicate that there are the same trend between the two. so the model can predict floes number and size during flocculation of yellow river ' s loess particles without using empirical parameters. the tem and sem were used to obsever floes in the study of floe structure. the flocculation was divided as flocculi, floc and floe aggregate. the floes structure model was established by assumption that particles position in floe accords with tetrahedron. the fractal dimension of model and experimental floes was found to be coincidentso the model can reflect the structure of flocs formed in flocculation of yellow river ' s loess particles by macromolecule flocculant at a certain extent

    最後，本文還對絮凝動力學和絮體結構進行了研究，在前人研究的基礎上，針對高分子絮凝黃河泥沙，對絮凝過程作了一些符合試驗條件的假設，建立了顆粒碰撞頻率表達式，應用了顆粒數量平衡方程，從而建立了絮凝過程的動力學生長模型，模型計算結果與試驗數據對比表明，二者趨勢一致，在沒有使用經驗參數的情況下基本上能夠描述黃河泥沙絮凝過程中絮體數量和尺寸分佈的變化過程；對絮體結構的研究中，應用掃描電子顯微鏡和透射電子顯微鏡對絮體進行了觀察，將絮體分為絮粒、絮團和絮網三個不同的生長階段，通過假設顆粒結合位置符西安建築科技大學博士學位論文合正四面體，建立了絮體結構模型，計算得到的模型絮體分形維數基本與試驗中的實際絮體相符，在一定程度上能夠反映高分子絮凝黃河泥沙生成的絮體結構。
  14. Flexible penis - shaped vibrator with pronounced testicles and a strong glans finished in slippery purple see - through jelly material. size : 18 x 4 cm. with powerful mulit - speed vibrations ( please order 2 aa batteries separately )

    富有彈性的陰莖振動器，帶有凸出的睪丸和強壯的龜頭，採用順滑的紫色果凍材質製作。尺寸： 18 * 4厘米。速度可調。
  15. The foundation of concrete should be horizontal the appearance should be smooth, and which must be borne evenly the weight of transformer, the transformer is fixed on the foundationby means of press board fixed method

    有關尺寸參見組合式變壓器外形圖混凝土臺基水平，表面平整，要均勻隨組合變的重量，組合變採用適當的方式固定在臺基上
  16. Calculate dimensions and parameters like screw pitch, diameter of gear pitch circle etc. by given casting parts

    根據給定的鑄造零件進行測繪，運用已學過的基本知識，計算出有關尺寸，如螺距、孔中心距等的有關參數等。
  17. During the course of modeling ldmos, the paper puts forward the method in which maxwell function in the static system is applied in analysis compute of ldmos threshold voltage. schwarz - chritoffel transformation method is used to solve the gate self - capacitance with limited size. at the same time, it also provides the method which computes the drain and source self - capacitance by conformal transformation and the equivalent - voltage sharing - charge model

    在對ldmos的建模過程中，本文提出了將靜電系統中麥克斯韋方程用於ldmos閾值電壓的分析計算的方法，引入了許瓦茲-克利斯多菲變換來求解了有限尺寸的柵自電容，並提出了用保角變換和等電壓電荷共享模型來計算漏與源的自電容的方法。
  18. Rapid prototyping manufacturing ( rpm ) and rapid tooling ( rt ) can rapidly fabricate complicated prototypes and various mould & dies of higher dimensional precision and better surface roughness respectively. with those technologies, the objective of rapid product development ( rpd ) can be achieved consequently

    快速成型技術（ rpm ）與快速模具製造技術（ rt ）能分別用來快速製造具有復雜形狀的原型及具有高尺寸精度和低表面粗糙度的各類工模具，因而利用這兩種技術能實現快速產品開發的目的。
  19. Based on domain decomposition method ( ddm ), a hybrid technique is presented for the analyses of electromagnetic scattering by electrically large bodies with deep cavities. it can alleviate the problem of memory units when applying fem alone to such objects

    採用基於區域分解技術的fem用o一ptd方法，分析了帶有深腔的三維電大尺寸導體目標的電磁散射特性，克服了單純的fem / po一ptd方法分析帶有電尺寸較大的深腔目標時，計算機內存無法滿足要求的缺點。
  20. Standard test method for stopping distance on paved surfaces using a passenger vehicle equipped with full - scale tires

    裝有足尺寸輪胎的乘用車在鋪覆路面上剎車距離的標準測試方法
分享友人
分享到 Line

分享到臉書