燒結構造 的英文怎麼說

中文拼音 [shāojiēgòuzào]
燒結構造 英文
sintered structure
  • 燒 : Ⅰ動詞1 （使東西著火） burn 2 （加熱或接觸某些化學藥品、放射性物質等使物體起變化） cook; bake; hea...
  • 結 : 結動詞（長出果實或種子） bear （fruit）; form （seed）
  • 構 : Ⅰ動詞1 （構造; 組合） construct; form; compose 2 （結成） fabricate; make up 3 （建造; 架屋） bui...
  • 造 : Ⅰ動詞1 （做; 製作） make; build; create; produce 2 （假編） cook up; fabricate; concoct 3 [書面語...
  • 構造 : structure; construction; constructional detail; tectonic; structural; makeup; anatomy; constituti...
  1. This paper describes the structure, technical features and technical requirements of manufacture of a gasification stove with four contraposition burners on side walls, expatiates on its manufacturing process, key techniques and quality guarantee measures such as barrel formation, machining, assembly welding, heat treatment, subassembly secondary machining and precision detection

    摘要氣化爐是煤化工的核心設備，大慶油田金屬結構廠與哈爾濱鍋爐廠合作，為某大型石化企業製造了一臺側壁4個燒嘴對置式新型氣化爐，該氣化爐是目前國內同類產品中最大的氣化爐。
  2. The experimentation of cool and hot diagnosis reflected the structure and disposal of combustor, slag bonding and smirch of hearth are the main factors of hearth ' s outlet overheat and output of boiler decline

    冷、熱態診斷試驗反映出爐膛結焦、粘污及燃燒器的結構和布置等因素是造成爐膛出口煙溫偏高，鍋爐出力下降的主要因素。
  3. This article aims at the boiler ' s problems in operation : 1 ) under nominal load, the smoke temperature at the outlet of hearth reaches 1200, far more exceeds 1050 the original designed temperature. this will always result in slag inside boiler and the temperature of overheater ' s pipe superheat, so that boiler cannot take nominal load and all these influence boiler ' s nomal operation heavily, 2 ) this article also studied the reason why the assistant oil becoming necessary when coal changes. during the nomal operation, many factors ( makeup of combustor and its disposal, smirch and encrust of water wall, excessive air coefficient, temperature of primary air, coal type and density of coal dust ) can deviate the designed working conditions, then affect the boiler ' s nomal operation

    本文針對該鍋爐在實際運行中存在的問題：在額定負荷下，爐膛出口超溫、低溫段過熱器前煙溫高達936 ，遠遠超過815的設計值；噴燃器四周水冷壁結焦嚴重，過熱器管壁溫度超標，無法帶上額定負荷；甚至有時因燃煤質量的變化，必須投油助燃的嚴重情況進行了分析研究。在實際生產過程中，燃燒器的結構、布置，水冷壁的粘污、結垢，過剩空氣系數、一次風溫、煤種及其濃度變化等許多因素都會偏離鍋爐的設計工況，從而影響爐內的傳熱和燃燒，造成爐膛出口超溫、水冷壁結渣等問題。
  4. Meanwhile, based on the magnetic material theory, a complete analysis and summary are carried out on the three crystal structure and technology theory ; especially the ingredient analysis is made on the microscopical morphology and x - ray diffraction and its mixtures existence and relevant metallurgy about the typical second resource such as coldrolling iron and oxide red, steelmaking sludge and feso4 based on the practeal investigation of the pre - burning materials in domestic products plant, especially the analysis on the domestic markets and components, and connecting with reality and material characters in panzhihua iron and steel ( group ) cmpany, we established the product orientation and developing direction in panzhihua iron and steel ( group ) company ; after carrying out the technology reform on the old no. 1 magnetic product plant of enterprise company, making a detailed study on the various conditions for establishing a plant, the feasible research report is formed of 1400 tons ( per year ) feo preburning material and 3000 tons ( per year ) middle and high quality magnetic products ; so a necessary and reliable supports are provided both theoretically and practically for the development of the magnetic industry in panzhihua iron and s teel ( group ) cmpany

    同時，對磁性材料的理論基礎，尖晶石、磁鉛石、石榴石三大晶系結構以及其工工藝理論進行了較為全面的歸納、分析和總結；尤其針對攀鋼產生的二次資源如冷軋鐵紅、煉鋼污泥、硫酸亞鐵等三種典型原料分別作了成分分析、微觀物理形態以及x光衍射分析、其夾雜物的存在形式及相應的金相分析。對國內鐵氧體磁性材料的預燒料及磁件生產廠家的工藝、設備、技術、成本、質量狀況進行了實地的調研，特別是對國內磁性材料的市場及競爭對手進行了詳盡的分析，在此基礎上，結合攀鋼實際及原料特點確立了攀鋼發展磁材產業的產品定位及發展方向；對企業公司原有磁件一廠進行了技術工藝改造，對建廠各項條件進行了詳細的分析，形成了了年產14000噸年鐵氧體預燒料以及3000噸年中高檔磁件產品的可行性研究報告，從理論上和實踐上為攀鋼磁性產業的發展提供了必要的可靠的依據。
  5. This product combines excellent micro structural flexibility with very good coat ability because of dead burned magnesia / low chromite / hercynite combination

    由於重燒鎂砂和低鉻鐵礦/鐵鋁尖晶石的組合，該產品結合了優良的微結構彈性和良好的造窯皮能力的優點。
  6. Examination of the density, strength, hardness and microstructure showed that the mechanical properties and structure of the part made by direct metal forming process are better than that obtained from selective laser sintering process, as good as or even better than castings

    對成形件進行的密度、強度和硬度指標測試和金相組織觀察表明：基於弧焊的直接金屬成形件的組織結構和力學性能指標明顯優于選擇性激光燒結工藝成形件，達到或高於鑄造零件。
  7. The reform scheme of no. 1 boiler in fengtai company is confirmed on the basis of cold / hot tests, theoretical discussions and calculations. in the process of field retrofit, it is indicated in the operation of the improved furnace that without the change of furnace structure, the transform of the burner angle has shrunk the tangential diameter and prevented flames burning on furnace walls, and the burning state of furnace has been bettered, simultaneously, lowering the slagging wi in furnace, thus laying sol id foundation for the safe and economic operation of generating units. wuyanrong ( power plant thermal power engineering ) directed by prof

    本論文通過冷、熱態試驗，經過論證和計算，確定了豐泰公司~ # 1爐燃燒器的改造方案，並進行了現場改造，改造后實際運行狀況表明：在無法改變爐膛結構的情況下，改變燃燒器角度，縮小切圓直徑，使火焰不貼壁，改善了爐內燃燒工況，同時降低了鍋爐結渣的程度，為機組的安全經濟運行奠定了必要的技術基礎。
  8. The questions the researcher concerned are which system will be chosen and how to obtain the good lithium ionic conductor materials, which is the basic departure of the paper. the addition of second phase in composite can change the interface structure and the conduction mechanism, improve the matrix conductivity and other function such as the sintering, crisping and so on, so the research of composites are an interesting field of the ionic conductors. the synthesis of lithium ionic conductor is often by solid state reaction, but this method needs high temperature and leads to the volatility of lithium which not only causes the drift of the compounds but gets the no well - distributed materials

    研究者所關注的問題是選擇新的體系進行研究，以期得到性能更好的鋰離子導體材料，這也正是本論文的基本出發點；復合離子導體中第二相的加入改善了基質的界面結構和導電機制，不僅可以提高基質材料的電導率，還可以在一定程度上改善材料的其它性能，如燒結性能、脆性和機械強度等。因此復合材料的研究是離子導體一個有廣闊前景的發展方向；合成鋰離子導體，特別是成分復雜的體系以傳統的固相合成法為主，但這種方法需要較高的溫度，容易引起鋰的揮發，從而造成產物組成的偏移，而且不易得到顯微結構均勻的材料。
  9. On one hand one can inquire more comprehensive conditions of steel construction, industrial plant construction or of industrial boilers or on the other hand of refuse incineration plants, waste incineration plants, waste heat boilers in addition to bridge sanitation and steam boilers and steam generators, under the number + 49 203 44 98 - 314 at thyssen kloenne gmbh

    Thyssen kloenne gmbh是一家高級企業，該企業針對客戶需求製造專門的廢熱鍋爐、余熱鍋爐，橋梁整修，蒸氣鍋爐和蒸氣機，垃圾焚燒設備，工業設備製造，工業鍋爐，鋼結構。
  10. This paper is a thesis about the application of htac technology on furnace and introduces the furnace construction, regenerative combustion system and control system

    摘要介紹了高溫空氣燃燒技術在攀鋼軌梁廠加熱爐上的應用，介紹了爐體結構、蓄熱式燃燒系統、控制系統及改造后的效果。
  11. The results show that the fine sintering will be gained in the reasonable laser technical parameter, which can improve densenses and wear resistance, inaugurate a new technique of manufacture diamond tools

    結果表明，在合適的激光工藝參數下可以得到組織結構良好的金剛石微粉壓坯燒結體，顯著提高燒結體的緻密性和耐磨性，開辟了一種金剛石工具製造的新工藝。
  12. Somehow the shape is associate with a praying gesture, or a ships bottom turning upward. the components of a building, pillars, beams, and the roof are totally replaced by four shells. though it is the result of advanced architecture idea and technological entrepreneur, the surface bricks are traditional

    教堂兼具傳統與創新，簡潔的造型，卻給人許多聯想，像雙掌閉合默禱，又像船底倒置，薄殼結構的造型取代了建築的柱子、橫梁、樓板和墻面，是理念的突破，技術上的挑戰，而外貼的燒釉面磚，卻具有傳統中國風味。
  13. The ability of being non - inflammable is shown through the fact that the mattress is not inflammable by a burning cigarette ; on fire exposure the mattress does not activate and expand the fire as other materials do ; the mattress rapidly absorbs liquid because it has an openly porous structure, allowing an easy stop of the fire by water

    Kymdan床墊的防燃燒性能體現在：點燃的香煙掉到床墊上不會著火：在與火勢接觸時不會造成雄雄大火，而且不象其他物料般迅速將火勢蔓延。由於有通氣孔透氣結構，因此kymdan床墊有迅速吸收的性能，可以容易以水撲滅火種。
  14. In order to solve the problems effectively, under the auspices of 863 plan in china, the synthesis diagnosis has been carried by means of measuring and numerical imitating the combustion chamber of refining column, and some conclusions is such as : ( 1 ) through measuring the temperature and combustion in the burning chamber of the refining column, the result shows the temperature difference on the same level is more than that in height direction, and there is a few of co in bottom of burning chamber. ( 2 ) in order to ensure normal work of flue system in lead column in the course of zinc refining, theoretic calculation and measure about the flow resistance of exhaust gas are carried through. the results of study reveal that drawing out force of chimney is inadequate, which is mainly caused by illogicality of flue construction

    在研究過程中，採取了現場實測和數值模擬手段對韶關冶煉廠鋅精餾鉛塔燃燒室及排煙系統進行了綜合診斷，具體結果包括如下： （ 1 ）完成鋅精餾鉛塔燃燒室內溫度測試以及燃燒狀況的測試，結果發現：鉛塔燃燒室內水平方向的煙氣溫度並非均勻，而且其溫差比上下方向的溫差更大，以及鉛塔燃燒室尾部存在co未燃燼問題； （ 2 ）為了保證鉛塔煙氣系統的正常工作，對煙道系統的阻力進行了理論計算及測試分析，結果發現：鋅精餾鉛塔煙氣系統中煙囪抽力不夠，這主要是煙道結構不合理所造成的。
  15. On the basis of annlyzing the main domestic cocurrent combustor, we adopted the up and down - shade - technology to reform the combustonafter researching the characteristics of main coal and its affecting factors, i. e., density of coal dust, granularity of coal dust, firing characteristics, alteration of coal, we put forward the scheme of coal ' s configuration and reforming plan about structure of combustor and its disposal type. finally, we make a debugging of cool and hot performance and operation optimizing

    因此，本文在分析目前國內主要直流燃燒器性能的基礎上，選用了上下濃淡燃燒技術，改造了燃燒器；通過對現場燃燒的主要煤種特性及煤粉濃度、煤粉細度、著火特性、煤種變動等的分析研究，提出了配煤方案和燃燒器的結構、布置方式改造方案；最後進行了冷、熱態性能與運行優化調試。
  16. These results show that since the existent defects of combustion device structure and its hypothetical circle of contact, these make a poor primary and secondary wind rigidity in operation and a too big actual circle of contact. in addition, the coal used is extreme prone to burn and reside in boiler. under such a condition, the coal powder ignites earlier in a short time and short distance when it leave the jet - combustioning device, and splashes the water cooler, eventually this results in a burned coal residue in boiler

    針對宏偉熱電廠410t / h燃煤鍋爐嚴重結渣問題，對燃煤的結渣性、爐內溫度工況及空氣動力工況等進行實驗研究，由於燃燒器結構和假想切圓選擇的缺陷，使得鍋爐在正常運行時，一、二次風剛性較差，實際切圓過大，加上目前燃用煤質屬于極易燃、易結渣煤質，致使煤粉在離開噴燃器很短的時間、較短的距離內開始著火，並沖刷水冷壁，最終造成爐膛結渣。
  17. A 2100 series diesel engine is modified into a spark ignited lpg dedicated engine. to improve power performance, economic performance, and emission performance and to enhance the power of the lpg engine, it is necessary to improve the combustion rate of lpg. it is realized by the application of a new kind of prechamber system

    對一臺2100柴油機進行了改造，使其成為火花點火式液化石油氣發動機，因液化石油氣燃燒速度低，為改善其動力性、經濟性、排放性和提高功率，有必要提高液化石油氣的燃燒速度，為此，設計了一種結構簡單、成本低廉的預燃燒系統，大大提高了燃燒速度，排放也得到改善。
  18. The finite - rate combustion kinetic model for standing oblique detonation waves is established. the tvd finite volume scheme is also presented. the combustion flow fields of standing oblique detonation waves are numerically simulated using 7 species and 8 reaction steps hydrogen combustion model, 10 species and 12 reaction steps methane combustion model respectively

    建立了適合多組分含有限速率化學反應流體流動的數學模型，構造了多組分化學反應流體流動守恆方程的tvd有限體積數值格式，採用7組分8反應的氫燃燒， 10組分12反應甲烷燃燒的化學反應機理，數值模擬了駐定斜爆轟波燃燒流場，取得了較好的結果。
  19. Answer : as the development of rural economics, on a lot of farmer lids tile room, some has been reinforcing steel bar mixes clay structure, but, still still have many it is the building building with fireproof small order and degree, and the building is adjacent and optional the gender is big, produce fire to spread fast, cause easily " baked wheaten cake joins camp "

    答：隨著農村經濟的發展，許多農民蓋上了磚瓦房，有的已經是鋼筋混泥土結構，但是，仍然還有不少是耐火等級低的土木建築，而且建築毗連隨意性大，發生火災蔓延快，輕易造成「火燒連營」 。
  20. This layout can stop the internal arc fault expansion ; can avoid harmful moisture, small animal and dusty interferences. it also has good perfomiance and high reliability. because the heat cannot transmit to the outside of the bus room, a good operation environment for the low space can be obtained

    主母線室置於箱體頂部一個單獨的金屬封閉的間隔內，並與10kv開關室、儀表室等間隔相互獨立，為同類產品首創；這種結構可以防止內部電弧故障的擴大化，避免「火燒聯營」事故；防護性能好，防潮、防小動物侵害、防積塵，運行可靠；由於母線室的隔熱作用，為下層空間創造了一個較好的運行環境。
分享友人
分享到 Line

分享到臉書