纖維填料 的英文怎麼說

中文拼音 [xiānwéitiánliào]
纖維填料 英文
cellulose filler
  • 纖 : 纖形容詞（細小） fine; minute
  • 維 : Ⅰ動詞1 （連接） tie up; hold together; link 2 （保持; 保全） maintain; safeguard; preserve; keep ...
  • 填 : 動詞1. （墊平或塞滿） fill; stuff 2. （補足; 充滿） replenish; supplement; complement 3. （填寫） fill in; write
  • 料 : 名詞1 （材料; 原料） material; stuff 2 （喂牲口用的穀物） feed; fodder 3 （料器） glassware 4 （...
  • 纖維 : fibre; staple; filamentary
  1. Taking the brown alumina powder and french chalk as the refractory, the silicasol and dextrin as the composite binder, the western bentonite and sodium carboxymethyl cellulose ( cmc ) as the composite suspension agent, the optimum mixing ratio of the water - based coating was established by the method of orthogonal experiments

    摘要選用棕剛玉粉及滑石粉為耐火填料，以硅溶膠及糊精為復合粘結劑，以鈉基膨潤土和羧甲基纖維素鈉（ cmc ）為復合懸浮劑，通過正交試驗方法確定了最佳配方。
  2. Standard specification for aluminum - pigmented asphalt roof coatings, nonfibered, asbestos fibered, and fibered without asbestos

    無纖維增強石棉纖維增強和無石棉的纖維增強的填充鋁顏料的瀝青屋面塗層標準規范
  3. The best technical condition of the reed pulp is in 47 sr, wipped off primary fines and added secondary fines up to 10 %, meanwhile, adding stuffings ( abietic acid, vitriolic aluminium, french chalk )

    漂白蘆葦漿抄造文化用紙的最佳工藝條件為：在打漿度為47 sr時去除一級細小纖維，加入10 %的二級細小纖維，同時加入填料（松香膠、硫酸鋁、滑石粉） 。
  4. Non - cellulosic papers for electrical purposes - specifications for individual materials - filled glass paper

    電工用非纖維素紙.專用材料規范.填充玻璃紙
  5. Non - cellulosic papers for electrical purposes - part 3 : specifications for individual materiels - sheet 1 : filled glass paper

    電氣用非纖維素紙.第3部分:專用材料規范.活頁1 :填充玻璃砂紙
  6. Non - cellulosic papers for electrical purposes - part 3 : specifications for individual materials ; sheet 1 : filled glass paper

    電工用非纖維素紙.第3部分:單項材料規范.第1活頁:填充玻璃砂紙
  7. Non - cellulosic papers for electrical purposes - part 3 : specifications for individual materials ; sheet 1 : filled glass paper iec 60819 - 3 - 1 : 2001 ; german version en 60819 - 3 - 1 : 2001

    電工用非纖維素紙.第3部分:專用材料規范:第1頁:填充
  8. Such as various fiber packingmetallic gasket, non - metallic gasketssheet gasket material, and reinforced composite sheet sealing material. packing series : expanded graphite packing, reinforced graphite packing, die - formed graphite ring packing expanded graphite molded packing, carbonized fiber packing, kevlar fiber packing, pure ptfe packing, ptfe graphite packing, ramie fiber braided packing, asbestos packing, ptfe graphite packing aramid corners, graphite ptfe packing inter aramid, acrylic fiber packing, novolid fiber with ptfe packing, carbon fiber packing, ptfe filament packing, ptfe lubricant packing, cotton with oil packing, e - glass fiber packing etc

    密封盤根系列：膨脹石墨盤根，增強石墨盤根，碳化纖維盤根，高碳纖維盤根，芳綸纖維盤根，芳綸包角黑四氟盤根，芳綸黑四氟交織盤根，膨脹四氟盤根，含油四氟盤根，黑四氟盤根，割裂絲盤根，石棉浸四氟盤根，苎麻盤根，壓克力盤根，等等以及各種模壓盤根填料環，和各種盤根壓制的盤根環。
  9. Graphite packing, carbonized packing, kevlar packing, ptfe packing ningbo sinklan industry trade co., ltd. is mainly engaged in producing three kinds of sealing products, packing series, gasket series, packing gasket sheet series. such as various fiber packingmetallic gasket, non - metallic gasketssheet gasket material, and reinforced composite sheet sealing material. packing series : expanded graphite packing, reinforced graphite packing, die - formed graphite ring packing expanded graphite molded packing, carbonized fiber packing, kevlar fiber packing, pure ptfe packing, ptfe graphite packing, ramie fiber braided packing, asbestos packing, ptfe graphite packing aramid corners, graphite ptfe packing inter aramid, acrylic fiber packing, novolid fiber with ptfe packing, carbon fiber packing, ptfe filament packing, ptfe lubricant packing, cotton with oil packing, e - glass fiber packing etc

    公司生產出口各類流體密封材料及製品，主要有密封盤根，密封墊片和密封材料三大系列產品，如石墨盤根芳綸盤根，碳纖維盤根， ptfe盤根，各種金屬墊片，纏繞墊片石墨增強墊片石墨切割墊片， ptfe墊片石棉墊片，非石棉墊片，各種墊片板材，卷材，四氟介面密封帶，閥桿填料，盤根線等等，廣泛應用於石化煉油電力鋼鐵造船海洋工程等行業不但解決了國內許多電廠煤氣廠化工廠等泵浦閥件管道在各種氣體化學流體輸送中的密封泄露問題，已為眾多知名企業所指定和選用而且已大量出口到歐洲中東南美洲以及東南亞等許多國家和地區。
  10. Graphite packing, carbonized packing, kevlar packing, ptfe packing ningbo sinklan industry trade co., ltd. is mainly engaged in producing three kinds of sealing products, packing series, gasket series, packing gasket sheet series. such as various fiber packingmetallic gasket, non - metallic gasketssheet gasket material, and reinforced composite sheet sealing materialpacking series : expanded graphite packing, reinforced graphite packing, die - formed graphite ring packing expanded graphite molded packing, carbonized fiber packing, kevlar fiber packing, pure ptfe packing, ptfe graphite packing, ramie fiber braided packing, asbestos packing, ptfe graphite packing aramid corners, graphite ptfe packing inter aramid, acrylic fiber packing, novolid fiber with ptfe packing, carbon fiber packing, ptfe filament packing, ptfe lubricant packing, cotton with oil packing, e - glass fiber packing etc

    公司生產出口各類流體密封材料及製品，主要有密封盤根，密封墊片和密封材料三大系列產品，如石墨盤根芳綸盤根，碳纖維盤根， ptfe盤根，各種金屬墊片，纏繞墊片石墨增強墊片石墨切割墊片， ptfe墊片石棉墊片，非石棉墊片，各種墊片板材，卷材，四氟介面密封帶，閥桿填料，盤根線等等，廣泛應用於石化煉油電力鋼鐵造船海洋工程等行業不但解決了國內許多電廠煤氣廠化工廠等泵浦閥件管道在各種氣體化學流體輸送中的密封泄露問題，已為眾多知名企業所指定和選用而且已大量出口到歐洲中東南美洲以及東南亞等許多國家和地區
  11. After looking up a large amount of native and foreign information, the materials used in the experiment were as follows : ptfe base, graphite filler, molybdenum disulfide filler, copper powder filler, carbon fiber and so on. the experimental method is that the formula was designed according to uniform experimental method, the relationship between formula and frictional property was found with spline function and then the representative test points were chosen from fitting curve to make verification test for optimization. the preparative technique of solid lubricant is cold - press sintering method

    經過查閱大量國內外文獻資料后確定原料為：聚四氟乙烯樹脂為基體，加入石墨、二硫化鉬、銅粉、碳纖維等填料；試驗方法為：根據均勻試驗方法設計配方，用樣條函數找出配方與摩擦性能的關系，然後在擬合曲線上選取具有代表性的試驗點進行驗證試驗，達到優化的目的；制備工藝：冷壓燒結法制備固體潤滑劑。
  12. The results indicated that the dimension, shape and purity of base material could meet the functional demand of solid lubricant ; the thermal decomposition temperature of ptfe resin exceeds 400 c, but organic and inorganic packing filler added in ptfe made the water absorption rate of composite material increased, melting temperature and decomposition temperature decreased, in the meanwhile oxidative decomposition reaction was accompanied ; polar groups such as c = o, c - o - c and so on in the carbon fiber surface is advantageous to increase compatibility with other components and interlayer shearing strength ; uniform design experimental method could help to find the relationship between formula and frictional property by relatively small tests. the developing trend of each formula ' s friction coefficient could be showed by fitting curve ; the friction coefficient with no copper powder or graphite in formula was relatively big. this fact showed that copper powder and graphite should be used cooperatively ; it was found that when the ratio of copper powder to graphite by weight is 15 : 60, 30 : 30 - 40 and 60 : 15 - 30 respectively, the friction coefficient was relatively small. the degree of crystallinity of pure ptfe reached maximum by air cooling and the abrasion loss also reached maximum among three ones ; at the same time, the abrasion loss of solid lubricant sample was also the biggest among three ones ; when solid lubricant matched with 45 # steel axle or gcrl5 steel axle, lubricant transfer film could be formed on metal surface, thus direct contact between the surface of metal friction pair rings was reduced. their working life was elongated extremely ; there was mainly much graphite, a little ptff, moo3, feso4, cus and so on in lubricant transfer film

    試驗結果表明：所選原料的尺寸、形狀及純度可滿足固體潤滑劑的性能要求；聚四氟乙烯樹脂熱分解溫度超過400 ，但在ptfe中加入無機填料會使復合材料吸水率提高，熔融溫度及分解溫度降低，且伴有氧化分解反應；碳纖維表面含有c = o及c - o - c等極性基團，有利於提高其與其它組分的相容性，提高層間剪切強度；均勻設計試驗方法能夠用較少的試驗次數找出配方與摩擦性能間的關系，擬合曲線基本能表示各配方的摩擦系數發展趨勢；配方中不加銅粉或不加石墨，其摩擦系數均較高，說明銅粉和石墨應該配合使用；當銅粉15份、石墨60份時，銅粉30份、石墨30 - 40份時，銅粉60 、石墨15 - 30份時，摩擦系數均具有較低值；純聚四氟乙烯樹脂在空氣冷卻時結晶度最大，磨損量也是三者中最大的；同時，固體潤滑劑試樣在空氣冷卻時的磨損量也是三者中最大的：不論是固體潤滑劑與45 #鋼軸配副或是固體潤滑劑鑲嵌入銅套后與gcr15鋼軸配副，在金屬表面均可形成潤滑轉移膜，從而減少金屬摩擦副表面間的直接接觸，大大延長其使用壽命;轉移膜中主要含有較多的石墨、少量聚四氟乙烯、 moo 。
  13. In this investigation carbon black - filled electrical conductive composites of poly ( ethylene terephthalate ) / polyethylene were first prepared through the single - screw melt - blended extrusion, then drawing, followed by the quenching and subsequent press molding. the relationships among the influencing factors including composition, hot stretching ratio and compatibilizer, morphology and properties of composites were systematically investigated. positive temperature coefficients effect and crystallization behaviors of composites were preliminarily analyzed

    本文擬採用單螺桿熔融共混擠出?熱拉伸?淬冷的新的成型方法制備炭黑填充的pet pe復合導電材料，熱拉伸的目的是使材料的分散相（ pet相）在加工過程中原位形成纖維，而炭黑基本分散在纖維中或纖維的表面上，使炭黑粒子間間距減小，形成更多的導電通路，從而提高材料的導電性能，同時保持或提高材料的力學性能。
  14. Three - dimensionally braided structural composites have distinct structure that is fully integrated, continuously spatial fiber - network impregnated with ductile material. the new innovative materials have not plies as conventional composites have, and put an end once and all to low interlaminar strength showing in laminate materials. because of their enhanced stiffness and strength in the thickness direction, near - net - shape design and manufacturing, superior damage tolerance and specified aerospace function, the braided composites are gaining more and more attention of industry and academia

    三維編織結構復合材料是完全整體、連續、多向的紡線（纖維束）的網路，充填以延性材料，這類新材料已失去通常復合材料的層合板概念，由此，層合板復合材料層間脆弱的致命弱點在編織結構復合材料中得到克服，所以編織結構復合材料具有高的強度和剛度（包括在厚度方向） ，接近實際形狀的製造，高的沖擊韌性、高的損傷阻抗，和按實際設計要求的特定的航空航天方面的使用功能，因而廣泛地受到工業界和學術界的關注。
  15. The methods of compounding then with fiber or textiles, such as composite spinning, hollow fiber filling, textile coating and micro - encapsulation, are exemplified and compared

    例舉復合紡絲法、中空纖維填充法、織物塗層后整理法、微膠囊法等相變材料與纖維或紡織品的復合方法，比較各種復合方法的特點與優劣。
  16. Ropes, string, nets, tents, awnings, tarpaulins, sails, sacks and bags not included in other classes ; padding and stuffing materials except of rubber or plastics ; raw fibrous textile materials

    纜繩網帳篷遮篷防水遮布帆袋不屬別類者襯墊及填充料橡膠或塑料者除外，紡織用纖維原料。
  17. Class22 ： ropes, string, nets, tents, awnings, tarpaulins, sails, sacks and bags ( not included in other classes ) ; padding and stuffing materials ( except of rubber or plastics ) ; raw fibrous textile materials

    類別22 ：纜、繩、網、帳篷、遮篷、防水遮布、帆、袋（不屬別類者） ；襯墊及填充料（橡膠或塑料者除外） ，紡織用纖維原料。
  18. Class 22 ropes, string, nets, tents, awnings, tarpaulins, sails, sacks and bags ( not included in other classes ) ; padding and stuffing materials ( except of rubber or plastics ) ; raw fibrous textile materials

    商標注冊類別22纜、繩、網、帳篷、遮篷、防水遮布、帆、袋（不屬別類者） ；襯墊及填充料（橡膠或塑料者除外） ，紡織用纖維原料。
  19. Standard guide for identification of fibers, fillers, and core materials in computerized material property databases

    計算機處理的材料性能數據庫中纖維填充料和磁心材料的識別
  20. Acrylic coating blended with various fibers and filler sand with brilliant colors are used as coating material for tennis court and playgrounds

    混合了不同纖維填料的丙烯酸塗料加入鮮艷的顏色之後，就可用作網球場地和操場的塗層材料。
分享友人
分享到 Line

分享到臉書