蝸桿和蝸輪 的英文怎麼說

中文拼音 [gǎnhélún]
蝸桿和蝸輪 英文
worm and worm wheel
  • 蝸 : 名詞[動物學] （蝸牛） snail
  • 桿 : 桿名詞（桿子） pole; staff
  • 和 : 和動詞（在粉狀物中加液體攪拌或揉弄使有黏性） mix （powder） with water, etc. : 和點兒灰泥 prepare some plaster
  • 輪 : Ⅰ名1 （輪子） wheel 2 （像輪子的東西） wheel like object; ring; disc 3 （輪船） steamer; steamboa...
  1. Main products include suited offset point imprinter bearing sets comber gear for weaving industry metal mould and gear vacuum gear synchro gear worm worm wheel. acme whorl fitting and all kinds of fittings with various gears

    主要產品：印刷行業各種膠印機和印后設備輪及軸承套，紡織行業精梳機輪，金屬板材壓延模具和輪，真空泵輪同步帶輪蝸桿蝸輪副acme螺紋副各種直斜錐及各種盤類和軸類件等機械加工件。
  2. The thesis developed the optimization design software of geometric parameter for the worm gear including strength check module, the drawing contact lines module, the change lines of tooth thickness of worm, and the parametric modelling software for the reducer which includes parametric modelling of parts and assembly. the cad prototype system is very convenient because of its accessible interfere, simple operation and written in chinese. by input design parameters ， the cad system can make optimization design and strength check for the worm gear ， draw contact lines of tooth flank of worm - gear and change line of tooth thickness of worm ， judge if the tooth flanks of worm undercut and if the sideward tooth of worm - gear hob come to a point ， make project design and structure design for the reducer and draw its 2d parts and assembly

    研究和開發了平面二次包絡環面蝸桿傳動的參數優化設計和校核軟體系統：包括幾何參數設計計算模塊，強度校核模塊，繪制齒面接觸線模塊，蝸桿齒厚變化曲線模塊和蝸桿根切判別模塊；開發了平面二次包絡環面蝸桿減速器外形與結構尺寸數據庫以及傳動效率數據庫，建立了平面二次包絡環面蝸桿傳動公差及極限偏差數據庫；開發了平面二次包絡環面蝸桿減速器參數化建模軟體：包括零部件的參數化建模模塊和裝配圖的參數化建模模塊，其中零部件的參數化建模包括蝸桿軸系的參數化建模、蝸輪軸系的參數化建模、箱體的參數化建模、端蓋的參數化建模、軸承的參數化建模和其它零部件的參數化建模軟體模塊。
  3. Accuracy of worms and worm gears - part 1 : general bases

    蝸桿和蝸輪的準確度.第1部分:一般基礎
  4. Worm and worm wheel

    蝸桿和蝸輪
  5. On the basis of the engage efficiency and lubricious conditions, theoretical transmission efficiency with the different drive ratios ( 1 / 50 and 6 / 31 ) of involute cylinder worm gears is analyzed. at the same time, the change trend of engage efficiency and transmission efficiency with different design parameters is discussed. the experimental investigation on transmission efficiency

    從漸開線蝸輪蝸桿傳動的嚙合效率和潤滑條件兩個方面對不同傳動比的漸開線圓柱蝸桿的傳動效率進行理論分析，並通過傳動比分別為1 / 50和6 / 31的漸開線圓柱蝸桿設計參數得到蝸桿潤滑條件的理論分析結果和蝸桿嚙合效率、傳動效率的變化趨勢，同時利用電測法對蝸桿傳動的傳動效率、潤滑油平衡溫度進行測試，將測試數據與理論計算結果進行對比分析，得出理論分析結果的正確性。
  6. On the condition of “ many - head ” and “ small drive ratio ” ， the plane double enveloping hourglass worm can not settle the problem of undercutting and sharpening simultaneously. it has devoted to a new type hourglass worm _ sphere double enveloping hourglass worm. the coordinate system is established according to the frock. the meshing equation and the tooth equation of worm and gear have been developed and the distribution of contact line on gear tooth is analyzed. to evaluate the meshing quality ， four meshing quality indexes and five original parameters are put forward. through mass programming computing ， the relations between meshing quality and original parameters are derived and depicted by graphs

    考慮到平面二次包絡環面蝸桿傳動在多頭小傳動比條件下根切與齒頂變尖的矛盾很難同時解決且嚙合性能較差，介紹了一種新型環面蝸桿傳動? ?球面二次包絡環面蝸桿傳動.在研究過程中，根據工裝建立了坐標系，根據一二包過程的運動關系推得了嚙合方程和蝸桿與蝸輪的齒面方程，分析了蝸輪齒面上的接觸線分佈.為了評價嚙合性能，提出了4項性能指標和5項原始參數，通過大量編程計算得到了嚙合性能指標與原始參數之間的關系，並以圖表直觀的表示
  7. This robot is a joint - robot like a man and uses worm and worm wheel and harmonic gear retarder in its machine which makes the structure of robot more refinement

    機器人採用了關節式類人結構，在機構上使用了諧波減速器和蝸輪蝸桿等裝置使機器人的結構更加精巧。
  8. Creative points and all tasks having be finished are briefly shown below : according to the classical space meshing theory, we have strictly deduced a series of formulae such as the equation of contacting line of worm, the equation of the second limiting curve of worm gear, and the equation of working surface and non - working surface, etc. and we have deeply studied the algorism of the actual contacting lines of worm gear drive

    本文的主要創新點和成果如下：基於經典共軛嚙合理論，對平面二包蝸桿副的運動關系進行了嚴密分析，獲得了蝸桿副齒面方程、蝸桿齒面一界曲線方程、蝸輪齒面二界曲線方程等一系列齒面分析所必須的數學公式，並深入研究了蝸桿副齒面接觸線的演算法，為蝸桿副的三維數字化造型打下了堅實的數學基礎。
  9. Tooth surface equations and contact line equations of the involute worm gearing are established according to its machining methodology. meshing characteristics in rigidity condition are studied. these characters include the inductive normal curvature along the contact line on the worm surface, the first and the second limit lines during the engage of the worm gear, and the influence of the intersect angle between the contact line the relative velocity of the worm and the gear on transmission performance

    根據漸開線圓柱蝸桿傳動的創成方法，建立了漸開線圓柱蝸桿和蝸輪的接觸線方程式、齒面方程式，分析了漸開線圓柱蝸桿傳動的剛性嚙合特性，如蝸桿與蝸輪嚙合時的誘導法曲率、一類界限曲線、二類界限曲線和蝸桿與蝸輪間相對速度方向和接觸線方向的夾角對傳動性能的影響； 2
  10. By means of the optimization method - punishing function method and taking the sum of the planet gear radius and center distance as the target function, the parameters of drive are optimized. by using the optimization program, the initial serial studies of drive are completed, the best serial parameter value of the drive is given

    採用外點罰函數優化方法，通過取行星輪半徑和中心距之和作為優化目標函數，對滾錐齒超環面行星蝸桿傳動進行了參數優化，運用此優化程序，初步完成了對該種傳動的系列化研究，給出了傳動系列的最佳參數取值。
  11. Establishing a close partnership with tianjin huashengchang gear company, we can produce the plane enveloping toroidal worm reducer with a high accuracy and a high productivity which has high efficiency in transmission and less noise and stable operation

    我們由於提供了靈活的生產方式和天津華盛昌齒輪公司的長期合作，因此可以生產出高精度，高效率雙包絡面蝸桿渦輪副的客梯用曳引機系列產品，其特點是傳動效率高，在噪音低，運行平穩可靠，可與進口曳引機相媲美。
  12. Cylindrical worms ; dimensions, correlation of shaft centre distances and gear ratios of worm gear drives

    圓柱形蝸桿.尺寸軸心距和蝸輪傳動傳動比之間的關系
  13. The motion of the drive is also demonstrated. the paper mainly concludes the following works : the paper introduces the meshing theory of rolling cone - type toroidal drive and the motional relations of all parts, gives the formula of transmission radio. the relation between tooth numbers and helix angle of every parts is found out, and the assemble relation among all the parts is also given

    本論文主要包括以下內容：介紹了超環面行星蝸桿傳動的傳動原理及各構件間的運動關系，分蝸桿固定和定子固定兩種情況，給出了這種新型傳動的傳動比計算公式，得出了各輪齒數與計算圓處螺旋升角間的關系和各構件間的裝配關系，從而為該傳動的優化打下理論基礎。
  14. The software uses two entity configuration methods : extruding and simulating entity cutting in realizing three dimensional configuration, which successfully achieve three dimensional configuration of involute columnar vertical gear, involute columnar helical gear, standard vertical spline, archimedes worm and disco - cam

    軟體在三維造型功能實現上使用了拉伸和模擬實體切削兩種實體造型方法，成功地實現了漸開線圓柱直齒輪、漸開線圓柱斜齒輪、標準直齒條、阿基米德蝸桿和盤形凸輪的三維造型。
  15. The method can meet fully the need of the evaluation of the scuffing load capacity to all kinds of worm gear oil. the different kind of additives and varied contents of additive have obvious influence on the scuffing load capacity of worm gear oil. for mixing worm gear oil, the additives that suitable for worm gear oil should be made of anti - wear additive which is the mainly component and a little extreme pressure additive which has a gentle performance

    試驗研究結果表明：本文研究開發的蝸輪蝸桿油膠合承載能力臺架評定方法具有較好的重復性和區分性，能夠滿足評定各種蝸輪蝸桿油膠合承載能力的需要；添加劑的不同類型及不同復配形式對蝸輪油的膠合承載能力有著較明顯的影響；在調制蝸輪蝸桿油時，適用於蝸輪蝸桿油的添加刑，應以油性劑為主劑，復加少量的性能較溫和的極壓抗磨劑。
  16. Klingelnberg pse600 and psr500 composite testing machines for worm and worm gear sets

    德國leitz pmm 12106三坐標測量機克林貝格pse600和psr500蝸桿蝸輪綜合檢查儀。
  17. Based on the tribology theory, the experiment method of the scuffing load capacity of worm gear oil was studied in this paper by means of the large number of groping evaluation experiments, and based on the test results of worm gear drive lubricated by 15 types oils and the surface analysis of worm gear after the experiments, the effect of oils and additives on anti - scuffing load capacity of worm gear pair was studied. the results show that the experimental method of the scuffing load capacity of worm gear oil has a good repeatability and distinguishability

    本文運用摩擦學理論，通過進行大量的臺架評定探索性試驗，研究開發出蝸輪蝸桿油膠合承載能力臺架評定試驗方法，並在此基礎上進行15種不同配方的蝸輪蝸桿油的膠合承載能力臺架評定試驗和試驗后蝸輪齒面的表面能譜分析，以考察潤滑油、添加劑對蝸桿傳動膠合承載能力的影響結果。
  18. It has many advantages such as several couples of teeth meshsing simultaneously, double touching lines on each interacting surface, high transmission ratio and heavy load, etc. and it ' s easy to form elastohydrodynamics lubricant film between two interacting surfaces. but this kind worm gear drive is not used widely in china. the reason is that its manufacturing method - dual generating method - is outdated

    但是，由於目前加工該型蝸桿副的方法為對偶法，必須專門加工蝸桿和專用蝸輪滾刀，對于不同參數的蝸桿副蝸輪滾刀不能通用並且在加工中需多次對刀，導致平面二包蝸桿副加工成本高而精度低。
  19. Abstract : calculation of the length of contact lines of a double enveloping wormgearing with planar generating surface and finding out the size of contact area are th e foundation of strength analyses of wormgearing

    文摘:計算平面二次包絡環面蝸桿副的接觸線長度和了解蝸輪齒面接觸區域的大小是蝸桿傳動強度分析的基礎。
  20. Accuracy of worms and worm gears - part 2 : tolerances for individual errors

    蝸桿和蝸輪的準確度.第2部分:單個誤差的公差
分享友人
分享到 Line

分享到臉書