齒輪齒形曲線 的英文怎麼說

中文拼音 [chǐlúnchǐxíngqūxiàn]
齒輪齒形曲線 英文
gear tooth curve
  • 齒 : Ⅰ名詞1 （牙; 牙齒） tooth 2 （物體上齒形的部分） a tooth like part of anything 3 [書面語] （年齡...
  • 輪 : Ⅰ名1 （輪子） wheel 2 （像輪子的東西） wheel like object; ring; disc 3 （輪船） steamer; steamboa...
  • 曲 : 曲名詞1 （一種韻文形式） qu a type of verse for singing which emerged in the southern song and ji...
  • 線 : 名詞1 （用絲、棉、金屬等製成的細長的東西） thread; string; wire 2 [數學] （一個點任意移動所構成的...
  • 齒輪 : gear [rack; toothed] wheel; （toothed） gear; wheel gear
  • 曲線 : [數學] curve; bight; bought; profile; net曲線板 french curve; irregular curve; curve board; splin...
  1. In the special fields wheel drive, wheel, gear box construction with spiral technology or beyond that with hypoid, cone, spur wheel as well as with gears, spiral cones and / or with bevel gear and cogged wheels and gears is graessner gmbh well - known

    Graessner gmbh是一家現代化的、可靠的專門產品供應商，這家供應商從事傳動、傳動齒輪箱，錐體、圓錐、彈頭，錐齒輪，錐齒輪，錐齒輪驅動，錐形圓柱齒輪，輪、葉輪、齒輪，齒輪，齒輪傳動，螺旋錐，曲線齒錐齒輪傳動箱，圓柱齒輪，齒輪和傳動結構的製造、銷售。
  2. The thesis developed the optimization design software of geometric parameter for the worm gear including strength check module, the drawing contact lines module, the change lines of tooth thickness of worm, and the parametric modelling software for the reducer which includes parametric modelling of parts and assembly. the cad prototype system is very convenient because of its accessible interfere, simple operation and written in chinese. by input design parameters ， the cad system can make optimization design and strength check for the worm gear ， draw contact lines of tooth flank of worm - gear and change line of tooth thickness of worm ， judge if the tooth flanks of worm undercut and if the sideward tooth of worm - gear hob come to a point ， make project design and structure design for the reducer and draw its 2d parts and assembly

    研究和開發了平面二次包絡環面蝸桿傳動的參數優化設計和校核軟體系統：包括幾何參數設計計算模塊，強度校核模塊，繪制齒面接觸線模塊，蝸桿齒厚變化曲線模塊和蝸桿根切判別模塊；開發了平面二次包絡環面蝸桿減速器外形與結構尺寸數據庫以及傳動效率數據庫，建立了平面二次包絡環面蝸桿傳動公差及極限偏差數據庫；開發了平面二次包絡環面蝸桿減速器參數化建模軟體：包括零部件的參數化建模模塊和裝配圖的參數化建模模塊，其中零部件的參數化建模包括蝸桿軸系的參數化建模、蝸輪軸系的參數化建模、箱體的參數化建模、端蓋的參數化建模、軸承的參數化建模和其它零部件的參數化建模軟體模塊。
  3. This paper puts out the edge shapes curvilinear equations, of the edge shapes of double circular gear hob, and analyzes the tooth surfaces characterist. it also points out that the gear hob is a kind of approximate shape building cutting too ls in the whole course of using

    本文提出了直槽雙圓弧齒輪滾刀刃形曲線方程式，並進一步分析了該滾刀的齒面特性，指出該滾刀從整個使用過程看，是一種近似造型的刀具。
  4. Abstract : this paper puts out the edge shapes curvilinear equations, of the edge shapes of double circular gear hob, and analyzes the tooth surface ' s characterist. it also points out that the gear hob is a kind of approximate shape building cutting too ls in the whole course of using

    文摘:本文提出了直槽雙圓弧齒輪滾刀刃形曲線方程式，並進一步分析了該滾刀的齒面特性，指出該滾刀從整個使用過程看，是一種近似造型的刀具。
  5. Established the system of coordinates of roll testing, getting the parameters of equation of tooth face by solving the non - linear equations set ; according to the differential geometry and meshing principle, deduce the curvature parameters of tooth face and tooth profile, and get the parameters of instantaneous contact ellipse. emulate the contact trace and contact area of the working tooth face, and drawing the instantaneous drive ratio error curve

    建立了克林貝格擺線齒錐齒輪嚙合分析的對滾模型，通過對非線性方程組的迭代求解，得到齒面方程的各個參數;由微分幾何和切齒嚙合原理推導了齒面上齒廓和齒線方向的曲率參數，得到了瞬時接觸橢圓的參數。根據設計參數和機床調整參數繪制了工作齒面的接觸軌跡和接觸區圖形，並求得了瞬時傳動比的誤差曲線。
  6. Among the results of these researches, cylindrical gears with curvilinear tooth trace have merits as follows : higher bending stress, low noise, better lubrication conditions, and no thrust forces. so this kind of gear can be considered to substitute the helical gear and herringbones

    本文提出的弧齒線圓柱齒輪是一種新型齒輪傳動形式，具有傳動平穩、噪聲低、潤滑性能良好、輪齒彎曲疲勞強度大的特點，因此該齒輪可以作為斜齒輪和人字齒輪的替代品用於高速重載場合。
  7. Abstract : in this paper, the kinematically admissible velocity fields are established by using the metal flow patterns based on the experiments, and the configuration dimensions of billet and the curves of load - stroke in precision forging process for spur gear from solid billet are simulated on computer by upper bound method. the results acquired in the simulation are in good agreement with those obtained in the experiments

    文摘:本文利用有實驗根據的變形流動模式建立動可容速度場，利用上限法模擬用實心坯料精鍛直齒圓柱齒輪時坯料的外形尺寸變化和力?行程曲線，所得結果與實驗測定值很一致，可供沖擠精鍛工藝設計參考。
  8. This paper develops a mathematical model for the solution to the longitudinal tooth curve of an internal gear shaver based on the simplified principle for space transmission of a helical gear pair without flank clearance, and proposes a calculating approach of the profile modification of the grinding wheel to be used for grinding the longitudinal tooth curve of the shaver

    摘要用簡化的空間螺旋齒輪作無側隙嚙合傳動的原理，建立了求解內剃齒刀齒向曲線的數學模型，並給出了修磨這種齒向曲線的盤形砂輪的廓形計算方法。
  9. Modeling and simulating the tooth profile of non - circular involute gears with asymmetric teeth

    非對稱齒形漸開線非圓齒輪的齒廓曲線數學模型
  10. We proposed four kind of it and analyzed their structure. this kind of new actuating mechanism can realize the going around a turn under the condition of steady and smoothing, so it can realize the transmission continuous and long distance round about movement with the whole equipment

    同時，為了使該機構能夠實現正常的曲線嚙合，在漸開線柱齒鼓形齒輪和空間齒條機構之中引入了一個導引機構，並對其進行了結構設計和樣機製造，從而使這種空間齒輪齒條機構實現了平穩的空間曲線嚙合傳動。
  11. This article analyzed the system of the whole characteristic of the drumshaped gear with ring - involute teeth mechanism. thought of the influence of manufacture ’ s precision and the assembling accuracy to the design of mechanism ’ s steady and the system of control, we used the dynamics simulation software adams to analyze it on the base of establishing the 3d model and entity model. so we can get some property curved shape about it

    本文還對漸開線柱齒鼓形齒輪傳動機構的整體動態特性進行了系統分析，考慮了加工精度和裝配精度對運動裝置的穩定性及裝置控制系統設計的影響，在建立了該齒輪傳動機構的三維模型和實體模型的基礎上，利用動力學模擬軟體adams對傳動模型進行了動力學和運動學分析，得出了整個裝置運動的一些動力學特性曲線。
  12. Curvilinear toothed synchronous belt drive systems for general power transmission - part 2 : pulley

    通用電力傳輸用曲線式鋸齒形同步皮帶驅動系統.第2部分:皮帶輪
  13. Based on the computer geometrical models of straight bevel gears built, a iso - parametric tool path algorithms which was fit for the machining of multiple surfaces has been designed. the algorithms can solve the problems which exist in machining multiple non - rectangle parameter surfaces and avoid the calculation of sufaces intersection

    在建立直齒圓錐齒輪計算機模型的基礎上，提出了適于多曲面加工的等參數線刀軌生成演算法，避免了在對多張相鄰非矩形參數域齒面進行加工時所產生的干涉問題，而且曲面無需求交，使得計算成本下降。
  14. For cutting the composite lock gear with unequal tooth thickness, a study is made on the design method of gear sharper cutter with nonstandard parameter involute tooth profile and noninvolute tooth profile. the cutter tooth arrangement, the choice of teeth number of the cutter and the basic method of cutter design are discussed ; and a new method of choosing deflection factor by using limited area is presented. and the curve of relationship between rear angle on tooth crest and helical angle on tooth side of the cutter is given so as to give a basis for the gear sharper cutter to choose its parameters. to design nonstandard gear sharper cutter by adopting the method mentioned above will simplify the calculation and will increase the efficiency of design

    研究加工不等齒厚的非標準參數漸開線齒形，與非漸開線齒形復合的鎖閉齒輪插齒刀刀齒的排列、刀具齒數的選擇以及刀具設計的基本方法，介紹用限制區域選擇插齒刀變位系數的新方法，並給出刀具齒頂后角與側螺旋角的關系曲線，為插齒刀參數的選擇提供依據.結果表明，採用上述方法設計非標準復合齒輪插齒刀，可簡化計算和提高設計效率
  15. Abstract : in this paper, a kind of technological scheme for one - step precision forging spur gear with large module is put forward by using positive friction role. experiment, in which commercial pure lead is taken as test material, is done in the special die designed, and force vs. stroke curve is recorded. it is shown that positive friction role can efficiently make a contribution to the filling of the tooth cavity, but increase forming force

    文摘:針對大模數直齒圓柱齒輪，提出了利用積極摩擦一步成形的工藝方案，並用工業純鉛作為試驗材料，在設計的專用模具上進行試驗，記錄了力? ?行程曲線，結果表明：利用積極摩擦作用能夠有效地保證直齒圓柱齒輪精鍛時齒腔充滿，但同時增加了變形力。
  16. Gear form is precisely, plotted by portray point. for friendly user interface, the dialog - box is given, using dcl language to compile dialog box program. because the given program can not only output all the optimum basic parameters of pump gear, but also simulate the meshing process of a pair of pump gears, gear pump can be designed and manufactured economically

    精確繪出泵齒輪的輪齒幾何形狀，尤其精確繪制出了標準齒輪滾刀切出的齒根過渡曲線，演示了國標雙圓弧頭標準滾刀加工泵齒輪的過程，並實現了泵齒輪副的嚙合模擬，這些對檢查輪齒干涉以及確定齒輪泵的卸荷槽位置和形狀提供了依據。
  17. Firstly, the paper introduces the development and application of computer graphics & image technique, discusses the principle and method of cg and digital image processing, such as matrix of the graphic transformation, homogeneous reference frame, sampling and quantization of the image, file format of the image, template operation, etc. secondly the paper introduces the purpose and method of image enhancement processing, explains the each occasion of those methods such as threshold transformation, smoothing processing, sharpening processing, analyzes and contrasts the processing results of object image. thirdly, the paper introduces the method of mathematics morphologic, edge detection and thinning processing, attains character description of image and character dots of the contour. fourthly, the paper processes the coordinate transformation to character dots and basic splines fitting, imports correlative condition to devise meshing line and meshing track

    本文首先介紹了計算機圖形圖像技術的發展與應用情況，對計算機圖形學和數字圖像處理的一些基本理論和方法如圖形變換矩陣、齊次坐標系、圖像采樣和量化、圖像文件格式、模板操作等內容進行了討論：然後對圖像增強處理的目的和方法進行了介紹，對諸如閥值變換、平滑處理、銳化處理等方法的應用場合進行了說明，並對實物圖像的處理結果進行了分析與比較；接下來介紹了數學形態學方法、對增強后的圖像進行邊緣檢測的方法和圖像的特徵描述方法，並獲取輪廓的特徵點：隨后對獲取的特徵點進行坐標變換，並進行b樣條曲線擬合，引入相關條件生成齒輪副的嚙合線及嚙合軌跡：最後引入等值線和區域填充表示方法，並以等值線和區域填充的形式對弧齒錐齒輪嚙合模擬的載荷分佈情況進行了直觀的表示。
  18. Creatively, this paper advance involute as the tooth form that has been used widely in the engineering, and we also bring forward a design idea that tooth can be distributed continuously on spherical surface. based on those ideas, we invent the spherical gear of ring involute tooth. it is proved that this mechanism overcome the two big objections of traditional gear by solid model, and so a great breakthrough is achieved in the gear drive field. 2

    本文創造性地提出了採用工程上廣泛應用的漸開線作為齒廓曲線，並將輪齒沿緯度方向在球面上呈連續分佈的設計思想，在此基礎上發明了漸開線環形齒球齒輪機構，實物模型證明，該機構從根本上克服了傳統離散齒球齒輪存在的傳動原理誤差和加工困難兩大障礙，在齒輪傳動領域取得了重大突破。
  19. Firstly, based on research of the asymmetric involute gear cutter and the gearing theories, the universal tooth flank curve equations of asymmetric gear with two pressure angles and the tooth transmission curve are derived by the gear shape nomal method, then the fea model of asymmetric involute gear with main parameters is automatically generated with ansys parametric design language ( apdl )

    本文首先建立非對稱漸開線刀具的方程，根據齒形法線法建立非對稱漸開線齒輪的齒廓曲線方程，並利用apdl參數化建模語言建立全參數的非對稱漸開線齒輪有限元模型。討論了非對稱漸開線齒輪的嚙合特性，對非對稱漸開線齒輪傳動特點作了詳細的分析。
  20. The rationality of cycloid gear actual operating space is verified by optimizer, finally the conclusion of the isometric plus travel distance alter shape curve much more approach corner alter shape is obtained

    通過編制的優化程序驗證了擺線輪齒形工作部分范圍的合理性，得出了等距加移距修形曲線更逼近轉角修形曲線的結論。
分享友人
分享到 Line

分享到臉書