displacement configuration 中文意思是什麼

displacement configuration 解釋
排油結構
  • displacement : n 1 轉位，移動；取代，置換；（人的）流離失所。2 撤換，免職。3 【機械工程】（活塞）排氣量；【航海...
  • configuration : n. 1. 結構；構造；圓形，外形。2. 組合，布置；配置。3. 地形；【天文學】（行星等的）相對位置，方位；【化學】（分子中原子的）組態，排列；【物理學】位形；組態。
  1. In this thesis, four types of steel beam - rectangular cfst column connections, including normal welded flange plate ( wfp ) connection, bolted flange plate ( bfp ) connection, stiffened end plate ( sep ) connection and double split - tee plate ( dst ) connection, were designed based on the configuration of steel frame connection. total 8 models, 2 models of each kind of connections were tested under low - reversed cyclic loading at the end of cfst columns. the relationships between force and displacement at the end of columns, the relationships between the moment and rotation of the joints, degradations of strength and stiffness, ductility, failure mechanism and failure characteristics of these four connections under different axial - compression ratios were presented

    本文借鑒鋼框架節點構造，設計了四種類型矩形鋼管混凝土柱與鋼梁連接節點，包括常規栓焊（ wfp ）節點、翼緣全螺栓連接（ bfp ）節點、雙t板連接（ dst ）節點以及加勁端板連接（ sep ）節點，進行了四類節點8個模型試件在柱端低周反復荷載作用下的抗震性能試驗研究，比較了不同軸壓比下節點的滯回性能、強度與剛度退化、延性、破壞機理與破壞特徵，主要結論有： 1 、節點的位移滯回曲線與轉角滯回曲線為塊型分佈，沒有或略有捏攏現象，耗能能力強； 2 、軸壓比對節點滯回曲線有顯著影響，全部節點都有顯著的剛度退化； 3 、位移與轉角骨架曲線在峰值荷載後有較長的水平或下降段，具有良好的延性性能； 4 、從整體抗震性能上看，翼緣全螺栓連接節點、雙t板連接與加勁端板連接節點都優于常規栓焊節點，可在實際工程中加以推廣。
  2. In order to improve oil displacement efficiency of infusing agents and precisely to predict the three dimensional distribution about residual oil, taking the sand body of p 2 individual meandering river - channel in putaohuareservior of daqing oilfield as an example, by analyzing the thin interbeds and vertical permeability discrepancy, this paper brings forward the space configuration of the thin interbeds in single sand body, the vertical permeability distribution and gravitational differentiation which control the distribution of residual oil and the vertical multisection model of displacement efficiency in the condition of excluding exploitation factors and identical single sand - body,

    摘要為了進一步提高注入劑驅油效率以及準確預測儲層中剩餘油在三維空間的分佈，以大慶油田葡萄花油層組p 2小層曲流河道砂體為例，通過對曲流河道砂體內部薄夾層構形及滲透率垂向分佈的差異性分析，在排除開發因素差異的同井單砂體分析條件下，提出了單砂體內部薄夾層空間構形、滲透率垂向序列與重力因素共同控制剩餘油分佈、驅油效率多段垂向序列模式。
  3. The results indicate that the stability for bifurcation point equilibrium configuration and post - buckling equilibrium path of roof strata can be revealed and an effective method for determining displacement field of imperfection structure can be provided by using initial post - buckling theory

    應用初始后屈曲理論可揭示淺埋煤層長壁開采頂板巖層的分叉點平衡構形及后屈曲平衡路徑的穩定性，是確定非完善結構位移場的一種有效方法。
  4. And the displacement control of the leaf spring center was transferred to the displacement at load point. then after the load step options configuration, the leaf spring stress circulation under cycle loadings was calculated. the model was validated by the result compare between the rigid extracted from the simulation results and the one out of the rigid test of the leaf spring

    使用加載頭和簧片的接觸行為來模擬加載狀況，並將對簧片中心的變形控制轉換為對加載點的位移約束，然後利用載荷步選項配置完成一個載荷循環，由此計算出加載階段下鋼板彈簧內部的應力循環。
  5. The projection and section curve graphs of workspace boundary surfaces for 6 - sps type pmts are drawn. results of analysis show that the theoretic workspace of 6 - sps trpe pmts is enveloped by 30 surface patchs. input and output ewtons of displacement analysis for double - octahedron variable geometry miss pmts are established, analytical expressions for determining singuledty configuration are derived

    分別推導出了znys ztps型、 ips 3tps型和ipt ztps型並聯機床奇異倉形判別的解析表達式，得到了奇異曲面方程，並由邊界曲面分析方法得到了lps 3tps型和ipt ztps型並聯機床的工作空間，文中給出了以上混聯結構並聯機床奇異位形與工作空間分析的數值實例。
  6. In this paper, development state of grating measuring displacement system and measurement principle are briefly introduced, architectural configuration and communication protocol of the usb are analyzed, the development technology of cpld is also analyzed, based on all of these, the paper introduces the design of the hardware and software about the grating sensor interface card in detail

    本文簡要介紹了光柵位置檢測系統的國內外研究現狀以及光柵傳感器測距原理，分析了usb的體系結構、通信協議以及cpld開發技術，基於此，本文詳細介紹了光柵傳感器介面卡的硬體、軟體設計方法。
  7. Abstract : a novel method based on optic - fiber displacement sensing by using bimetallic element for temperature measurement is presented. both the simple configuration and the working principle of the new sensor are described. the theoretical model is given also

    文摘:提出了一種新穎的基於雙金屬片位移傳感的光纖溫度測量方法，設計了結構簡單的傳感器，介紹了測量儀的工作原理，建立了溫度測量的數學模型。
  8. The main work of this paper is proposing a innovative lunar rover with two - brace - slider suspension. the distinct characteristic of the configuration is translating perpendicular displacement of wheels into horizontal one of slider along main rocker

    本文的主要工作是創新提出一種月球車?雙曲柄滑塊月球車，該月球車的顯著特點是將車輪的豎直位移轉化為滑塊沿主搖臂方向的水平位移。
  9. In the practice application, the project ? the large dam secure supervising and measuring system of taipu brake, which the penman participated himself, is introduced in detail, which includes the system synopsis, the definition of the pressure, the crack, the horizontal displacement and the vertical displacement, the compare of diversified measuring methods, the choice of the instruments and the configuration of the instruments, the system network topology configuration, the collocation of various metrical dots and instruments " demarcating and testing, the system software and the application software, the communications between the intelligent instruments and the primary interfaces of actual system

    在實踐應用方面，詳細介紹了筆者親自參與實施的工程? ?太浦閘大壩安全監測系統，包括系統簡介，揚壓力、裂縫、水平位移和垂直位移的定義，各種測量方法的比較，儀器的選型以及儀器的結構，系統的網路拓撲結構，各測點的布置以及儀器的標定測試，系統軟體和應用軟體，智能儀器與上位機的通信，實際系統的主要界面。為了論文的完整性，介紹了大壩安全監測專家系統。
  10. The following work has been done in this paper : the load characteristic and design calculation method of spring are systematically studied. the method of using assembled springs to simulate flexible joint is presented, and then the structural configuration of simulation joint is given. the method above - developed can be used to calculate the parameters of the simulation joint on the given load and displacement conditions

    主要內容包括以下幾個方面：從彈簧的受力特性出發，系統地研究了彈簧的受力及設計計算方法；通過受力特性分析，提出了採用彈簧組合的形式來模擬柔性接頭的設計方法，並給出了模擬接頭的設計形式；結合理論方法，開發了能夠用於給定載荷和位移條件下計算所需模擬接頭參數的應用軟體，並給出了模擬接頭參數設計的算例。
  11. It also makes a detailed description on the configuration, development environment, basic principle and main functions of the software and on the specific application of the regression analysis in data analysis by taking the dam vertical displacement analysis as an example

    對軟體結構、開發環境、基本計算原理、主要功能進行了詳細闡述；並以大壩垂直位移分析為例，詳細講述了回歸分析在資料分析中的具體應用。
分享友人
分享到 Line

分享到臉書