element distribution 中文意思是什麼

element distribution 解釋
元素分佈
  • element : n 1 要素；成分；（構成）部分；分子。2 【化學】元素；【數學】元，素；【機械工程】單元；單體；【無...
  • distribution : n 1 分配，分發，配給；分配裝置[系統]；配給品；配給量；【經濟學】配給方法，配給過程；分紅；【法律...
  1. In this paper a kind of cardio - cerebral arterial bifurcation vessel hemodynamic characteristics are studied with the boundary element method, and the blood flowing velocity vector distributions have been calculated. in addition, the flow field distribution and the pressure on the particle surface are also calculated, when there is flow - round particle at the place of bifurcation, the move tendency of the particle is judged, the possible reasons of causing the atherosclerosis, thrombus, angioma are analysed

    本文用邊界元方法研究了一類典型心腦動脈分支血管中血液流動的流體動力特性，計算了分支血管血液流動的速度矢量分佈，同時計算了分支附近有多個顆粒狀繞流物時血液的流場分佈，及顆粒物所受壓力狀況，給出了顆粒物的運動趨勢，分析了引起粥樣斑塊病變、血瘤、血栓的可能原因
  2. The results obtained show the effects of defection cumulation material nonlinear and internal force distribution are remarkable with increase of crack element

    結果表明，考慮結構損傷的累積效應和材料的非線性性質，結構的內力重分佈較為顯著，開裂單元范圍加大，適用性能與耐久性能降低。
  3. The results indicate the stress of copper interconnects generates in the metallization and the thermal stress caused by thermal mismatch during the damascene process is the main stress. the thermal stress distribution in copper interconnects has been simulated by the finite element analysis software with the different trench structures

    對測量結果的分析得出金屬薄膜的淀積是造成銅互連線中應力的主要原因，熱應力在銅互連線應力中占較大比例，熱處理后銅互連線中應力減小。
  4. This paper simply introduces the device of on - line monitoring for the thrust of the rotating maching, then discu ed the finite dement analyses on the on - line monitoring elastic dement for measuring thrust in detail, in order to develop the performance of the se or and the device, we calculated the distribution of the stre 、 strain 、 axial di lacement in the elastic element using the finite element method when the axial forces f = 3 104n, the result is very satisfied

    簡單介紹大型旋轉機組軸向力在線監控裝置，然後詳細介紹軸向力測力彈性元件的有限元分析，為了提高所研製的測力傳感器的性能，採用有限元方法計算了彈性元件在軸向力f = 3 104n時的應變、應力、靈敏度及軸位移等的分佈情況，分析結果表明：所設計的測力傳感器完全符合廠方的要求及儀表性能指標。
  5. First, the theory of fretting wear and studies on fretting fatigue were introduced and the parametric method was used in the process of creating the model of dovetail joints in ug software. the elastic contact problem is analyzed in finite element method ( fem ) and is used to the parameters " distribution and contact stress of the joint are obtained on the base of ansys code. with the effect factor of load frequency, the prediction method of fretting fatigue life of dovetail joint under low and high / low cycle complex load is proposed

    本文介紹了微動損傷的機理和微動疲勞壽命的研究方法；利用ug軟體對燕尾榫聯接結構創建了參數化實體模型；基於ansys軟體平臺求解彈性接觸問題，獲得了榫聯接結構接觸應力及接觸狀態量的分佈；在已有微動疲勞壽命預測模型的基礎上，引入載荷頻率影響因子，對低周、高低周復合載荷作用下的燕尾榫聯接結構進行了微動疲勞壽命的預測，與試驗結果對比表明採用本文提出的方法預測榫聯接結構的微動疲勞壽命是有效的。
  6. And painstaking investigation for the industrial port of wisco production equipments, loading and unloading technological process and transportation assignment process and collecting a great deal of datum. they have found out the climacteric element which had made quantitative analysis and research about those climacteric elements. they have had come to the conclusion that the climacteric element of influencing the finished product wharf of the industrial port of wisco production ability, loading and unloading assignment efficiency, loading and unloading quality was the contradiction between goods " distribution of cargoes and the not match of shipping style, the transport organization process of steel was incardinate

    本文針對以上問題，在深入武鋼工業港生產實際，對其生產設施設備、裝卸工藝流程、運輸作業流程等進行調查研究和收集大量數據的基礎上，分析研究了制約武鋼工業港成品碼頭生產能力的關鍵因素，並對這些關鍵因素進行了量化分析和研究，得出了影響武鋼工業港成品碼頭生產能力、裝卸作業效率和裝卸全面質量的關鍵性因素是貨物配載和船型不匹配、鋼材運輸組織流程不協調的結論，指出克服這些影響因素的思路和方法。
  7. On the bases of the galaxy evolution theory, we use the therotical chemical evolution model of three zone ( such as halo, thick disk and thin isk ) and multi - phase ( diffuse gas, molecular clouds, stars of both low and high mass, the remnants ). by comparing with the observational constraints, such assurface densities, age - metallicity relation, g - dwarf metallicity distribution in the solar neighbourhood and the correlation between [ a / fe ] and [ fe / h ], supernovae rates, infall rates. the rationality of the model is verified. based on the theory model, we calculate the abundance of neutron capture element

    本文正是在銀河系化學演化的基礎上，利用銀河系的三成分（ threezone ） （即暈、厚盤和薄盤）多相（ multi - phase ） （氣體，分子云，大、小質量恆星以及剩餘物質）的化學演化的理論模型，通過與觀測約束（質量面密度、場星的年齡-金屬豐度關系、太陽附近g矮星金屬含量分佈函數、三成份的特徵量、元素的星系化學演化、超新星的爆炸率、內落速率等）的比較，來檢驗模型的合理性。
  8. Abstract as to using the method of three dimensional finite element, this study has analyzed the stress distribution of the porcelain fused to metal crowns with three different labial margin configurations under the forces from diverse directions

    摘要作者採用三維有限元法，對唇側頸緣三種形態設計的烤瓷冠，在承受不同方向力時，頸緣瓷體的應力變化進行分析。
  9. Abstract : the far - field spot characteristics of laser converted by random phase plate are analyzed theoretically, including the shape, size, rotational symmetry and diffractive efficiency of the spots, as well as the distribution of subsidiary spot. by comparing the influence of phase element shape ( triangular, square and hexagonal ) on the characteristics, we found that the random phase plate with hexagonal array structure is more suitable for the beam smoothing in laser fusion

    文摘:從理論上分析了激光經隨機位相板變換后在遠場的光斑特性（包括光斑的形狀、大小、旋轉對稱性、衍射效率以及旁瓣分佈） ，通過比較三種形狀位相元（等邊三角形、正方形和正六邊形）的遠場光斑特性，得知正六邊形位相元結構的隨機位相板更適合於激光聚變中的束勻化。
  10. The lognormal distribution is widely used in geology to characterize sediment size variations and geochemical element concentrations.

    在地質學中，對數正態分佈已被廣泛用以表示沉積粒度變化特徵和地球化學元素濃集情況。
  11. 5mg. kg - 1 respectively, zn concentration decreases in pileus when other hms were added, cu, pb, cd, concentration increasion in pleurotus ostreatus, the transformation and distribution is higher than single element, cd > zn > cu > pb

    菌蓋中鋅隨著銅、鉛、鎘的加入而減少，表現為拮抗作用；但當其他重金屬元素存在時，平菇吸收富集銅、鉛、鎘皆表現為協同作用。
  12. Meanwhile, by using delaminating combination finite element method and macro finite element analysis methods, the paper present two kinds of analysis programs. based on the aforementioned analysis program, the failure form, distribution of plastic hinge, load - carrying capacity, displacement and ductility characteristics are investigated to reveal the failure mechanism and the failure proceeding under seismic effects. the results are in good agreement with the test results, indicating the precision of the aforementioned two programs is satisfiable to the practical engineering design

    分別採用分層組合式有限元和宏觀有限元分析方法，編寫了2種鋼筋混凝土中高帶邊框柱剪力墻結構的彈塑性有限元分析程序，同時利用上述2種分析程序，研究了模型結構的破壞形態、塑性鉸的分佈、承載力、位移及延性性能等特性，探討了這類結構在地震作用下的破壞全過程與破壞機理，得到其主要受力特性和抗震性能的一般規律，所得結果與試驗值吻合較好，表明上述2種程序分析結果的精度均可滿足實際工程的設計要求，因此可用於這類結構的抗震性能分析與設計。
  13. The spatial distribution of element concentration values is expressed in the form of map.

    元素濃度值的空間分佈應以圖的形式表示。
  14. It is important to analyze the stresses and reinforcement design of spherical shell with transnormal nozzle because it is widely used in petroleum > chemicak nuclear electric and other industries. first of all, in order to explore and master the characteristic of stress distribution on this structure and to find reinforcement design which can accommodate to different instances, the stresses of a series of models with different t / t and r / r were analyzed by the finite element procedure - ansys

    首先，為了更進一步了解和掌握球殼超標開孔平齊接管結構的應力分佈特點，並找到適用於不同情況下的補強設計方法，本文利用ansys有限元分析計算程序對不同開孔率和不同厚度比的一系列球殼超標開孔平齊接管結構進行了應力分析，得到了應力分佈曲線和應力集中系數曲線。
  15. On the base of above it, this paper discuss the synthesis of optimum distributed arrays by nonuniform spacing in the sense of dolph - chebyshev. having derived the equations of optimum element distribution, we analyze the exponentially spaced array, which are optimum when the elements are isotropic and equally weighted, and the array by general raised cosine function. the formulate for estimating the sidelobe envelope, beamwidth of the array pattern and clean region width are obtained

    推導了最佳陣元分佈方程，分別對陣元無方向性和等加權時的最佳分散式陣列? ?指數間隔陣列和採用廣義升餘弦加權的最佳分散式陣列進行了分析，推導了天線方向圖旁瓣包絡、波束寬度，干凈掃描區寬度的估計公式，給出了近軸旁瓣電平與陣列參數的關系。
  16. In the design and analysis of sequence cipher, we obtain the following results. first, we give the trace representation of primitive sequences and their corresponding highest lever sequences on galois ring by using the trace function theory and the characteristic of lever factorization, and determine the correlation function linear complexity and element distribution of the highest lever sequences of primitive sequences on galois ring gr ( 4, m )

    在序列密碼的設計和分析方面：首先，利用galois環上跡函數理論和本原序列的權位分解特徵，給出了本原序列及其最高權位序列的跡表達式，然後利用galois域上二次型理論與指數和理論決定了特徵為4的galois環上本原序列的最高權位的相關函數、線性復雜度和元素分佈。
  17. The research of human resource value measure models of this paper has very important theoretical meaning and realistic significance. under the guidance of marxian labor valve theory and occident human capital theory and element distribution theory, this paper aims at the high science & technology software development enterprise and designs model systems of human resource group value and individual value measuring, which not only adhere the traditional accounting principle, but also combine qualitative analysis with quantitative analysis. in detail, it is organized as follows : ( 1 ) according to some defects of the available value measuring models, this thesis brings forward 4 innovative trains of thought : adopts the method that combine qualitative analysis with quantitative analysis, and establishes the new measuring basis that contain human resource the present period input cost and realized value, and defines the high - grade human resource as the target evaluation group of individual value measuring, as the basis for revealing the real contribution of human resource group firstly and achieving individual value by distributing group value to the target evaluation group in according with the specific rules secondly ; ( 2 ) analyzes the constitution of human resource value, and comes up with new way of thinking on group value measuring : adopts the historical cost means to calculate human resource group the present period input cost, and rectifies the present period realization value theory of li - shicong professor from accounting angle, and obtains more scientifically the group present period new contribution value, as the basis for structuring the new measuring

    首先揭示組織中人力資源群體對企業的真實貢獻，然後再將群體價值以一定的規則分配給目標評估群，從而確認個人價值; （ 2 ）分析人力資源的價值構成，提出新的群體價值計量思路:採用歷史成本法計量群體當期投入成本，並對李世聰教授提出的當期實現價值理論從會計學角度進行了修正，更為科學地確定了群體當期新增貢獻價值，從而構建了全新的人力資源群體價值計量模型; （ 3 ）分析個人價值的影響因素及其關系，提出新的個人價值計量思路:運用層次分析法獲得目標評估群在群體當期新增價值中的權重，確定高級人力資源當期所創造的貢獻份額;基於崗位相對權重和個人崗位績效評估值這兩個關鍵指標，將層次分析法和關聯矩陣法結合起來，計算個人貢獻價值系數，確定某個體在目標評估群中的權重，從而構建了全新的人力資源個人價值計量模型; （ 4 ）選取了一家人力資本含量較高的it公司，將所構建的理論模型在該公司進行了實證檢驗，驗證了模型體系在實務中的科學性與可操作性，從而在一定程度上豐富了人力資源價值計量理論，推動了人力資源會計與現行會計核算體系的接軌。
  18. Based on the summarization of metallogenic regularities and prospecting indicators as well as an analysis of such characteristics of anomalies as element association, element distribution and component zoning, this paper deals with the relationship between anomalies and mineralization and points out some ore - prospecting targets

    通過總結成礦規律和找礦標志，分析異常的元素組合、分佈、組分分帶等特徵，研究異常、礦化的相互關系，提出找礦靶位。
  19. Geochemical background and element distribution in soil in chengdu, sichuan

    四川成都土壤地球化學背景及元素分佈
  20. Abstract : the microstructure of as - cast high cr injection micro - alloying martensitic cast iron and the substructure of martensite in it have been observed under sem and tem. the alloying element distribution related to phase formation, as well as the various types of branch and distortion of carbide in the martensitic cast iron have been explored by using x - ray diffraction and electron probe analysis

    文摘:應用掃描電鏡和透射電鏡研究了噴射微合金化的鑄態馬氏體高鉻鑄鐵顯微組織及馬氏體的亞結構，並藉助x射線衍射與電子探針分析探討了合金元素的分佈與相形成的關系，以及碳化物的不同形式分枝與畸變。
分享友人
分享到 Line

分享到臉書