loading width 中文意思是什麼

loading width 解釋
貨廂內高
  • loading : n. 1. 裝貨。2. 裝載量；重量；載荷；（船隻等的）貨載。 3. 填充物，填料。4. 額外人壽保險。
  • width : n. 廣闊；寬度；幅度；（布匹的）門面；幅員；廣博。 12 feet in width 闊 12 英尺。 width in the clear 【林業】除皮直徑。
  1. Loading space width

    貨廂內寬
  2. Both static and cyclic load tests are conducted for a same size specimen. the purpose is to find the effect on shear strength from different height - width ratio, and to get the shear resistance limit by static and cyclic loading. according to test results, the improvement suggestions for the wall details and design are presented in this paper

    同樣尺寸的二個試件分別在頂端進行水平單調加載和水平方向低周往復加載抗剪試驗一次，試驗目的是測試墻體的不同高寬比對抗剪強度的影響以及墻體在單調加載及低周反復加載兩種情況下的抗剪強度pu並做出比較，從而對墻體構造及設計提出改進建議。
  3. The outline is frame pole loading structure : height : 2u 、 width : 19 standards case

    外形為架裝式結構，高度2u 、寬度19 『 』標準機箱。
  4. The controlled object hyvp ( hydraulic pressure vibration platform ) has the property of big loading pressure and rating power, so it need considerable transmitted and control power, it also has the property of high - level math model, and narrow frequency width in closed - loop, and bad stability. this thesis is based on the hpvs in the “ tiema project ”

    被控對象（液壓振動臺）具有負載壓力和額定功率相當大的特點，因此要求傳輸和控制的功率要相當可觀;而且它還具有數學模型階數高、閉環頻帶寬度窄、穩定性差等特點。
  5. The main content includes : in assembling analysis, three - line - one - row matrixes are obtained by getting the length, width and height of packing cases. any given packing cases are assembled by using pedigree assembling analysis, thus, we can obtain the number of the sorts and the length, width and height of each sort ; in loading a container, the input is any four kinds of them that are just sorted. the chanced packing cases are loaded by using tier up tier principle, side method and recursive method so that we can obtain higher space occupation ; in diagrammatic representation, the result of loading a container is shown in the screen by using simple one - dimension and tow - dimension diagrams

    本文圍繞這一主題進行了深入的理論和實踐研究，具體內容有：在聚類分析中，利用譜系聚類分析原理，提取包裝箱的長寬高作為三行一列矩陣，對給定的任意尺寸的包裝箱進行聚類分析，聚類后，得到聚類的個數和各類的長寬高；在方案生成中，選取了聚類后其中的任意四種作為方案生成的輸入，利用層疊原理，邊際方法，遞歸原理對選取的包裝箱進行裝箱，以達到佔有率較高的目的；在圖形顯示里，對方案生成結果作了一個簡單的一維和二維的示意圖。
  6. By using the arrived fundamental solution, combined with the " pseudo - traction " method and the boundary collocation, the stress intensity factor for crack in a finite plate under compressive loading are solved, the effects of crack direction and boundary condition on the stress intensity factor are analyzed, and the varying curves of the sif along with the width are given

    將所得的基本解與「偽力法」 、邊界配置法相結合，得到了有限板在壓縮荷載作用下應力強度因子的解法，分析了裂紋方向和邊界條件對應力強度因子的影響，給出了應力強度因子隨板寬的變化曲線。
  7. In this paper, 31 specimens of concrete filled rectangular steel tube ( cfrst ) are tested under cycle loading, the main parameters are axial ratio, section height to width ratio and steel strength

    考慮軸壓比、高寬比、混凝土強度等參數，進行了31根矩形鋼管混凝土壓彎構件滯回試驗。
  8. In this paper, the buckling behavior of cold - formed angle members is studied by non - linear finite element method. the influence of the width - thickness ratio of the single cold - formed angle column under axial load is analysed. the criteria of flexural buckling and torsional - flexural buckling for cold - formed egual - leg under axial loads is presented. according the calculating results of the ansys finite element method, the stability - coefficient formulas are simulated for the cold - formed loading single angle members of flexural buckling and torsional - flexural buckling

    本文運用非線性有限元法對冷成型單角鋼的穩定性能進行了研究，分析了寬厚比對冷成型單角鋼軸壓桿穩定性能的影響，給出了等邊冷彎角鋼發生彎曲屈曲和彎扭屈曲的判斷條件，根據ansys有限元的計算結果擬合出了冷成型單角鋼軸壓桿在發生彎曲屈曲以及在發生彎扭屈曲時的穩定系數公式，在此基礎上得出了冷成型單角鋼軸壓桿在所有長細比情況下的穩定系數公式。
  9. The finite element method ( fem ) is also employed in stability analysis of reinforced shells. in the fem model the principle of equivalent width is employed to simplify calculation of the modulus of the skin and the loading capacity of the post - buckling skin is also considered

    在運用有限元法對加筋殼穩定性進行分析時，對薄壁加筋殼結構按等效寬度原理，並考慮蒙皮屈曲后的承載能力，對蒙皮的彈性模量進行簡化處理。
  10. Secondly, considering the complexity of the analysis of inclined - loading pile, nonlinear finite element method is adopted to calculate the internal force and displacement of pile group under inclined loads, with the concept of equivalent width presented to simplify 3d problems into 2d problems. and a program is developed as well, which is able to consider the continuity, elastic - plasticity and layered characteristic of soil around the pile shaft. besides, the interactions among pile, base slab and soil are considered in this program and contact surface element is used to simulate slipping and crazing between pile and soil, or between base slab and soil under loads. then, the non - tension analysis is proposed, to reflect the low - tensile property of soil and concrete

    在此基礎上，針對傾斜荷載下群樁基礎分析中的復雜性，提出採用非線性有限元對傾斜荷載下群樁的內力及位移進行分析，應用樁的等效寬度概念將空間問題簡化為平面問題考慮，並開發出能考慮樁周土介質連續性、彈塑性、分層性等因素的傾斜荷載下群樁內力及位移分析的計算機程序，並在程序中考慮了樁、土、承臺的相互作用，提出了採用接觸面單元來考慮荷載作用下樁與土體及承臺與土體間的滑移、開裂；並在此基礎上，提出了傾斜荷載下群樁基礎的「無拉力」分析方法，可有效地反映土體及混凝土材料的低抗拉特性。
  11. 5. top air style shaftless fixing and liquid pressure lifting structure are adopted for raw material loading and discharging, and 7. screw motor is used for adjusting width

    5原料裝卸採用氣頂式無軸裝夾和液壓升降結構，由絲桿幅電動調寬。
  12. The beams under secondary loading ( namely the preloading was not removed ) are firstly studied in this dissertation, and the ultimate strength, stiffness, and the distribution of cracks of the beams strengthened with ferrocement have been analyzed. mid - span deflection, crack width and strains of steel were measured during the course of the test, and performances of the beams are compared and assessed with particular emphasis on cracking behavior, mid - span deflection, ultimate strength capacity, the modes of failure and so on

    本文首次對二次受力（初始荷載不卸除）試件進行了加固試驗研究，試驗中測量了試件的極限荷載、混凝土應變、鋼筋應變及鋼筋網應變等，對比了加固與未加固構件的裂縫開展、跨中撓度以及極限荷載情況，並研究了用該方法加固的梁在各種受力情況下可能產生的破壞形式等。
  13. The calculation of dynamic response under the loading of incident pulses with different rising - time shows that the oscillation of stress wave reflects the macro - heterogeneity of laminated materials, and that the oscillation becomes more distinct as the rising - time becomes steeper. for the periodical laminate, the oscillation period of stress wave depends on the width of each cell and the width of the whole representative cell

    針對兩種不同上升沿入射波加載時的計算表明，應力波的振蕩現象反映了材料的分層非均勻特性，上升沿越陡，振蕩越明顯；對于周期性分層材料，應力波的振蕩周期與各層的厚度以及周期性代表單元的總厚度是相關的。
  14. However if you mention the width and height of the image, browser can know exactly how much space should it allocate for particular image, and even before the image loads it can allocate this space to it and continue loading the rest of the page

    然而，如果設置了圖片的長度和寬度，瀏覽器就可以了解圖片的存儲空間，會在下載以前分配圖片的空間，然後繼續下載網頁的其它部分。
分享友人
分享到 Line

分享到臉書