order interval 中文意思是什麼
order interval
解釋
訂購區間-
Then following reality constituent of engine and connecting component interface, a nonlinear signal cylinder engine model has been created, though fire interval and fire order, a control - oriented four cylinders engine is build. following dynamometer is seen as load, performance of engine is simulated and researched under the condition of constant torque and speed, validation of the math and simulation model have been confirmed by comparison result between simulation with test result of engine performance simulation software dyno
按照發動機的實際組成，根據各部件的介面類型連接模型庫中的部件，建立了單缸發動機非線性模型，在此基礎上，依據發動機實際發火間隔和順序，建立了面向控制的四缸汽油機模型，並以測功器為負載，通過恆轉矩和恆轉速方式進行了發動機性能模擬和研究，模擬結果和發動機動力性能模擬軟體dyno測試結果的對比驗證了數學模型和模擬模型的正確性。 -
Dismantling the seedling curtain at first, cut the whole seedling curtain into two ( length of 50cm ), each half of seedling curtain is weave by 50 seedling ropes, open seedling curtain slowly, in order to stabilize the seedling curtain in certain layer of water, the top of seedling rope tie up the suspend rope and the underpart of seedling rope falls stones, the interval of each seedling rope is 20cm, confirm the seedling rope does not collide each other in the stormy waves
首先拆簾，將整個苗簾截成兩半（長50cm ） ，每半片苗簾由50根苗繩織成，將其慢慢拆開，苗繩上端栓在吊繩上，下端系墜石，使其穩定在一定水層，每根小苗繩間隔20cm ，保證苗繩在風浪中不互相碰撞。 -
In order to improve the efficiency of classification based on feature matching, the method of azimuth estimation from sar image is studied. a method of target ' s azimuth estimation from sar image using peak featur e based on linear regression is proposed, besides goodish estimation accuracy and high computation efficiency, it can also provide the confidence interval of the estimation, which can meet the need of model - based sar atr system that uses feature very well
為了提高基於特徵匹配的saratr系統的分類效率，論文進一步研究了sar圖像目標方位角估計方法，提出了一種利用峰值特徵基於線性回歸的sar目標方位角估計方法，該方法除了具有計算速度快、估計精度較高的特點之外，還能在估計方位角的同時，給出該估計的置信區間，從而能更好地滿足利用特徵基於模型saratr系統的需要。 -
An interval of one day had been left between the viewing and the sale in order to give the upholsterers enough time to take down the hangings, curtains and so forth
在參觀和拍賣之間有一天空隙時間，這是留給地毯商拆卸帷幔壁毯等墻上飾物用的。 -
Using the logarithm graph, multi - varieties production batch problem is resolved. the production scheduling is realized with heuristic traverse algorithm. at last, the strategies, which include disassembling task, shorting interval of the working procedure, overlapping working procedure, deferring the back working procedure etc., are brought forward to deal with the order ' s inserting, postponement, freezing and doing again on carrying out the production plan
3 ）分析了企業職能信息系統的集成性和各部門間的協調性，研究車間生產計劃的制訂過程，以模糊多屬性折衷式模型實現了工藝路線的決策，採用對數坐標圖表法，解決了多品種生產批量問題，用基於啟發式的遍歷演算法實現了生產工單的排產，最後提出了任務分解、縮短工序間隔，相鄰工序時間疊加，延遲后續工序等控制策略處理計劃執行過程中工單的插單、延期、掛停與返工等特殊問題。 -
The localization and expression of prolactin receptor from inner mongolia alpas cashmere goat were studied by sacpic staining, in situ hybridization and western blotting. samples of skin were taken at interval three months from birth, three months old, six months old, nine months old, ten months old or twelve months old, which correspond to summer, autumn, winter and spring. paraffin sections of hair follicles were stained with sacpic staining and in situ hybridization. the protein of prolatin receptor is abstracted from samples of skin in order to study on expression of prolactin receptor. there are prolactin receptors in outer root sheath, dermal papilla and inner root sheath. the growth of primary follicle is continuous
本實驗從絨山羊出生后每隔三個月采一次皮樣，共分為4個月齡（ 3 、 6 、 9 、 10或12 ）段，通過製作石蠟切片，原位雜交、染色，並提取皮樣蛋白做westernblotting等實驗研究方法，研究了催乳素受體mrna催乳素受體在不同生長季節的內蒙古阿爾巴斯白絨山羊皮膚毛囊中的定位與表達，染色結果發現阿爾巴斯白絨山羊初級毛囊全年持續生長，次級毛囊的生長情況隨季節而變化，秋冬季生長旺盛，夏季生長緩慢與絨毛生成規律呈正相關。 -
Eoi economic order interval
經濟定貨周期 -
This study made a conclusion ? amely in order to realize following the geological target while drilling, on the basis of making a better geological and drilling design for horizontal well, we must make full use of mwd, lwd and integrate logging to carry out lithfacy identifying in real time, the lwd interpretation and formation evaluation, to set up geological model of target formation, to select geosteering marked formation and compare simulative curves with lwd curves f to fix on the drilling direction of bit upper and declination, the position in target oil - gas layer, to revise borehole track in real time, to make it extend in reservoir better interval as possible
研究認為，在做好水平井地質設計和鉆井設計的基礎上，要實現隨鉆跟蹤地質目標鉆井，必須充分利用隨鉆測量、隨鉆測井和錄井等資料，從實時巖性識別、隨鉆測井解釋和地層評價、目標層地質模型建立、導向標志層的選取及模擬曲線對比等方面入手，確定鉆頭上下傾鉆進方向及在目標層中的位置，以實時調整井眼軌跡，使其盡可能在儲層物性較好的部位延伸。 -
In order to solve the flexible decision problem, the methods used in this paper include maximin method, set inclusion method, interactive method and interval analysis method
為解決柔性決策問題，本文採用了maximin方法、集包含方法、互動式方法和區間分析方法。 -
According to order relations defined between interval numbers, a fuzzy evaluation function is introduced into a multiobjective programming problem, this method results in the conversion of the complex multiobjective programming into the single objective programming
摘要對系數為區間數的多目標線性規劃規劃問題，在區間數序關系下提出了序關系評價函數概念，並給出了一個命題，用此方法可將復雜的多目標線性規劃為簡單的單目標規劃。 -
At first, in order to prevent the premature convergence of genetic algorithm effectively, the author brings forward a novel dyadic floating - point supplementary mutation operator. then, simulating the natural evolution, the author presents a novel topology, unoriented - connected topology, for parallel genetic algorithm. in the end, an interval decomposed optimization method is brought forward for ipga, which can improve the optimization performance of the algorithm
為提高演算法的性能，作者對遺傳演算法進行三種改進：首先，為克服遺傳演算法早熟收斂，作者提出一種新的二元浮點補碼變異運算元；其次，模擬生物自然進化模式，為并行遺傳演算法提出了一個新的并行拓撲結構- - - -無定向拓撲連接；最後，作者提出一種區間分解優化思想，來提高對最優解的搜索能力。 -
By studying on different operation mode and different interval flood of longyangxia reservoir, as well as the flood propagation time, pre - alarm scheme is established, which can alarm in order to lower construction losses when flood is in excess of standard
通過研究龍羊峽水庫的不同運行方式和不同頻率的區間洪水，以及水量傳播時間的研究，得出預警方案，當發生超標準洪水時，提前報警使施工損失降低到最小。 -
After analyzed the basic principle of optimized noise reduction on tyre pattern, summarized three approaches to noise reduction. the first is trying to reduce size of single block or socket to reduce noise amplitude on time domain, the second is to adjust stripes sorting order and their interlace value to avoid noise - made by every single block - peak values on time domain overlayed and the last is to adjust ratio of blocks and sockets, ratio of stripe interval and stripe sorting order to avoid noise periodical distribution and abnormal high peak values in some frequency strip
論文第四章分析了輪胎花紋優化降噪的基本原理，總結出三條降噪途徑：在允許范圍內盡量減小單個塊或槽的大小、刻刀槽軟化花紋塊來減小噪聲時域波幅度；調整節距排列順序、花紋條之間的錯位值，使各發聲單元發出的聲壓時域波形的同向峰值錯開，避免同向峰值疊加；調整花紋塊和槽比例、節距比例、節距排列順序，盡量避免周期性分佈，使輪胎所發出的噪聲趨于白噪化，避免某些頻段的異常高峰值。 -
Two methods are given. one is obtained by using degree reduction of interval rational bezier curves in two parameter directions according to the character of tensor product, which is called " single step method ". by comparison for degree reductions produced by the different order in two parameter directions, the relationships of the approximation results are discussed
然後討論了矩形域上區間有理bezier曲面的降階問題，給出兩種降階演算法：一個是針對張量積的特點將問題轉變為兩參數方向的區間有理曲線的降階逼近，即「單步法」 ，並討論單步法沿兩參數方向不同次序降階的關系。 -
In order to enhance the measure precision and expand the using area of the existing oil pipeline mfl ( magnetic flux leakage ) detecting system to natural gas pipeline testing, detailed information of flux obtained by decreasing sampling time and space interval is needed
為了提高現有輸油管道漏磁檢測系統的檢測精度以及擴展系統的適用范圍使其適用於天然氣輸送管道的檢測，需要通過減小采樣時間間隔和空間間隔的方法以獲得更加完備的漏磁場信息。 -
By using rank statistic and order statistic, we obtain the asymptotically strongly consistent estimator of it, the hypothesis test and interval estimation are also discussed
利用秩統計量和次序統計量，獲得了變點的一種估計，不僅論證了點估計的強相合性，而且討論了假設檢驗和區間估計。 -
The conformal microstrip antenna with some unique character has been applied in many fields, especialy on speedy objects. in this paper, an efficient fdtd algorithm is introduced to analyse the microstrip antenna. firstly, the fdtd formula in descartes coordinate system and in cylindrical coordinate system are obtained from the time _ dependent maxwell equations using the yee algorithm in a calculating region where the dielectric parameters are independent of time and space. the choice of the space discretization units and the time discretization interval are discussed which are decided by the accuracy and stability respectively. the shape and setup of the excitation source are discussed too. the excitation source is chosen to be gaussian pulse in shape. secondly, the mur ' s first - order and second - order boundary condition are deduced in cylindrical coordinate system. the methods of transforming radiation fields from near zone to far zone in the frequency domain and in the time domain are presented when fdtd is applied to analyse the characteristics of far zone. finally, three kinds of microstrip antennas are analysed. they are a slot antenna that lies on a plane ground of a microstrip, a slot antenna that lies on a cylindrical ground of a microstrip and a microstrip line _ fed aperture coupled stacked rectangular patch antenna in cylindrical coordinate system
本文從麥克斯韋旋度方程出發，建立了笛卡兒坐標下無源空間中均勻無耗媒質的fdtd基本方程和圓柱坐標下無源空間中均勻無耗媒質的fdtd基本方程，詳細討論了fdtd法計算中時間步長和空間步長的選取原則以及激勵源的類型和設置；推導了mur一階和二階邊界條件在圓柱坐標下的差分格式；給出了在用fdtd法計算天線的遠場輻射特性時必需採用的頻域和時域近場遠場變換技術；最後用fdtd法計算了平面微帶縫隙天線、柱面共形微帶縫隙天線和柱面共形微帶層疊天線的輸入阻抗和遠區輻射場，並分析了天線的一些參數的變化對天線輸入阻抗的影響，得出了一些有用的結論。 -
Improvement on equivariant prediction interval under order restriction
序限制下同變預測區間的改進 -
It applies an interval method to select element in the evolutionary structure optimization method ( eso ), and recovers or deletes element by the “ birth and dead ” function of element. another method viewed as second order smoothing technique for suppressing the checkerboard patterns has been proposed based on the filtering function ’ s principle. then the above methods are applied to solve a temperature - controlling problem in the steady heat conducting field and a multi - objective topology optimization problem considering multiple load cases and coupled effect
本文基於ansysparametricdesignlanguage （ apdl ） ，提出漸進結構法中應用區間法進行單元的篩選，通過單元「生死」的功能實現單元的恢復與刪除，根據濾波函數法原理提出修改的二階棋盤格處理方法，並就穩態熱傳導溫度控制問題，考慮熱、力耦合的多載荷工況的多目標拓撲優化設計問題進行求解。 -
In order to simulate the return, a radar coherent video echo model is used to simulate target echo, clutter and noise separately. then the three parts which are in the same range cell are added together to form a matrix to represent return in one radar coherent processing interval ( cpi ). this matrix is called a frame of range doppler data
為了較為全面地對雷達回波進行模擬，採用相干視頻回波模型分別模擬雷達目標回波、雜波和噪聲，通過在距離單元內疊加的方法，將一個雷達相干處理周期內的回波數據用一幀距離多普勒平面數據表示。
分享友人