source mechanism 中文意思是什麼

source mechanism 解釋
起源機構
  • source : n 1 源頭,水源,源泉。2 根源,本源;來源。3 原因;出處;原始資料。4 提供消息的人。5 血統。vt 〈美...
  • mechanism : n 1 (機械)結構;機械裝置[作用];(故事的)結構。2 【哲學】機械論 (opp vitalism)。 3 【文藝】...
  1. The pre - seismic and post - seismic stress direction can be statistically determined by a large collection of foreshock and aftershock focal mechanism data while the stress drop can be determined through the source fracture inversion from seismic wave data or crust deformation data

    地震前後的應力方向可根據大量前震和餘震震源機制統計給出;地震應力降可通過地震波或地殼形變資料的震源破裂反演研究得到。
  2. But it is not the same with surd or the alternation of sonant and surd. on the base of the acoustics, a whole linear time - varying discrete speech produce model is established through anatomising the factors including track, driving source and lip eradiation the mechanism of speech in this paper, and we draw a conclusion that the time between glottal closure is pitch period

    本文從聲學理論出發,剖析了語音產生的機理,綜合考慮聲道、激勵源和嘴唇輻射三方面的因素,建立了一個完整的、線性的和時變的語音產生的離散系統模型,得出兩次聲門閉合事件之間的時間間隔就是基音周期的結論。
  3. The industrial development in shandong should be located on the above - mentioned superior industries, known as the industries which is " inoculated " by the high and new technology and upgraded such as the leading industry like mechanism, electron, petrifaction and etc, or the traditional industry like energy source, textile, foodstuff, metallurgy and etc, or the high and new technique industry like electronic message, biological engineering, ocean and etc. correspond with the development and grandness of these strategic industry, the famousbrand products including the products of the household appliances, the utility type sedan, the refine chemical industrial products, computer software, halobios pharmacy, industrial revelation ware and etc should be created gradually, and then improve the structure of the industrial products

    山東省工業發展應定位於上述優勢產業,即經過高新技術「嫁接」和換代升級的機械、電子、石化等主導產業,能源、紡織、食品、冶金等傳統產業,電子信息、生物工程、海洋等高新技術產業。相應于這些戰略產業的發展和壯大,逐步創造出包括家電、經濟型轎車、精細化工產品、計算機軟體、海洋生物制藥、工業新材料製品等在內的名牌產品,並進而改善工業產品結構。隨著中國加入世貿,為應對經濟全球化的挑戰,關于產業競爭力的研究成為一大熱點,但以往的研究都側重於從國家或企業的角度考慮問題,本文試圖從區域經濟的角度研究產業競爭力,探索提升產業競爭力的途徑,為研究中國產業國際競爭力提供借鑒和參考。
  4. The characteristics of high pressure gyratory sprayed pumping discusses is presented, which is applicable in wide range of scope and ground layers, convenient for construction, long durability, wide source of materials. mechanism for subgrade strengthening : complex foundation of cement solid and earth between piles was formed by pulsant load of flowing pressure and spraying flow, water wallop, cavitation phenomenon, water wedge effect, extrusion force and air flow agitation etc so as to enhance foundation bearing force and reduce settlement and deformation

    高壓旋噴注漿技術具有適用范圍、適用地層較廣,施工方便,耐久性好,材料廣闊等特點;其加固地基機理主要是通過流動壓、噴射流的脈動負荷、水塊的沖擊力、空穴現象、水楔效應、擠壓力、氣流攪動等效應形成水泥固結體與樁間土的復合地基,從而提高地基承載力,減少沉降變形。
  5. Visual basic now provides a mechanism to allow the integrated development environment to separate generated code from your authored code into separate source files

    Visual basic現在提供了一種機制,允許集成開發環境( ide )將生成的代碼與您編寫的代碼分隔開,保存到單獨的源文件中。
  6. According to the water supply source used the mining area in bai yun, based on the mechanism of coagulation and flocculation, the feasibility of removing fluoride from water with the method of coagulation and filtration is studied through experiment. and several key parameters which affect defluorination are also analyzed. by using polyaluminum chloride ( pac ) as coagulant, the optimum ranges of the operational parameters are obtained

    本文根據白雲鄂博礦區飲用水的供水水源,以混凝機理為基礎,通過靜態和動態實驗,對用混凝過濾法除氟的可行性進行了研究,並對影響除氟因素的幾個主要參數進行實驗分析,得出了用堿式氯化鋁作為混凝劑進行實際運行時,參數最佳取值范圍。
  7. The basin - formed mechanism, evolution model and petroliferous geological features of compresso - shear basins in the world are analyzed, by which six aspects of the features are summarized as follows : 1 ) in the compresso - shear process, the sedimentary speed of basin is high, forming thicker coarse - grained clastic rocks which normally shape good petroleum reservoir ; 2 ) the source rocks of basin tend to coming from the organic matter - enriched rocks formed in pre - compresso - shear stages, except that in intense compresso - shear process, deep water - semi deep water source rocks are possibly developed in pre - compresso - shear stages, e4xcept that in intense compresso - shear process, deep water - semi deep water source rocks are possibly developed in frontal of deep depression ( fore deep ) of thrust belt ; 3 ) the en echelon folds ( including anticline and fault - nose structure ) are generally as good oil traps ; 4 ) the compresso - shear process is helpful to hydrocarbon accumulation ; 5 ) it may promote the maturity and hydrocarbon - generating process of organic matte, and 6 ) the thrust belts in the surrounding areas of compresso - shear basin are favorable are favorable domains for petroleum concentration

    摘要通過對世界上壓扭性盆地的成盆機制、演化模式和油氣地質特點分析,總結壓扭性盆地具有6個方面的石油地質特徵:壓扭作用期間盆地的沉積速率較高,一般形成較厚的粗碎屑沉積,它們常構成很好的油氣儲集層:盆地的烴源巖往住來自於前壓扭期砂成的富含有機質的巖石,但在強烈的壓扭作用期間,在沖斷帶的前緣深坳陷(前淵)中有可能發育深水半深水相的烴源巖;壓扭(張扭)作用期間形成的雁行式褶皺(包括背斜和斷鼻等)往住是很好的油氣圈閉;壓扭作用易於成藏;壓扭作用可以促進有機質的成熟生烴作用;壓扭性盆地的周邊沖斷帶是油氣賦存的有利部位。
  8. Abstract : blasting mechanism of exploding wires used for a new type of srtong pulsed ir source is studied theoretically and experimentally

    文摘:利用電爆絲的一種紅外脈沖強光輻射新技術,從理論和實驗上研究了電爆絲的爆炸機理。
  9. Abstract : to the principle and project that tu guangazhi proposed in 1990, the gold ore deposits in qinling ( shaanxi ) may be classified into fouowing types : archean high - grade gneiss type, fine grained fragmental rock - carbonate rock - silicilith type, metamorphic fragmental rock type, volcanic rock type, explosive breccia type, intrusive rock exo - and endo - contact zone type. inthis paper, the geological characteristics, metallogenic geological setting, the source of ore - forming materials, digenic mechanism and metallogenetic epoch of gold ore deposits are also discussed

    文摘:參照塗光熾先生( 1990 )提出的礦床類型劃分原則與金礦分類方案,將陜西秦嶺地區原生金礦劃分為太古界綠巖建造型、細碎屑巖-碳酸鹽巖-硅質巖建造型、變質碎屑巖型、火山巖建造型、隱爆角礫巖型和侵入巖內外接觸型金礦,並對各類型金礦的地質特徵、成礦地質背景、成礦物質來源、礦床形成機制及形成時代等問題進行了論述和討論。
  10. The rule of law consciousness primarily includes : power consciousness, authority consciousness, rights consciousness, equal consciousness, procedure consciousness, obeying law consciousness etc. law consciousness has the below aspects functions to administration by law : ( one ) the establishment of the power consciousness, is an premise to accurate master the administrative corpus and its power source ; ( two ) the establishment of the supervise consciousness, is a kit mechanism at the inside natural cover that administration by law would make use of ; ( three ) the establishment of the rights consciousness, is an inside value judgment to accurate master the administrative goal ; ( four ) the establishment of the procedure consciousness, is an inside pole which guarantee efficiently the administration by law to work ; ( five ) the establishment of the supervise consciousness, is an inside screen which exist in a kit mechanism. completely push forward administration by law, is not only enhance developments " inevitable request of administration legal system, but also inevitable request to practice " three representatives " with the important contents

    法治意識對依法行政具以下理論功能: (一)權力意識的確立,是準確把握依法行政主體及其權力來源的前提; (二)法律權威意識的確立,是準確把握依法行政之「法」的內涵基礎; (三)權利意識的確立,是準確把握依法行政目的的內在價值判斷; (四)程序意識的確立,是高效保障機制在依法行政中運用的內在桿杠; (五)監督意識的確立,是配套機制在依法行政中運用的內在屏障全面推進依法行政,不僅是加強行政法制建設的必然要求,而且是實踐「三個代表」的必然要求和重要內容。
  11. As a crucial embedded development tool, the embedded system debugger is usually used to debug and test embedded software 。 a embedded system debugger consists of a cross debugger and a debugger agent, which characteristic lies in the separation of running environments between the cross debugger and the debuggee and the dependence on the gdb agent in the debug session 。 with the development of embedded technique, various embedded debug techniques continuously advance and all kinds of embedded system debuggers are playing a more and more important role in the embedded software development 。 the gnu debugger, gdb as a tool in the gnu toolkits, is an extremely powerful source - level debugger 。 among gdb ’ s many noteworthy features, its ability to debug programs “ remote ” is fascinating 。 this capability is not only essential when porting gnu tools to a new operation system or microprocessor, but it ’ s also useful for developers who need to debug an embedded system based on a processor that gnu already supports 。 gdb is the preferred solution in embedded development because it provides portable, sophisticated debugging over a broad rang of embedded systems 。 this paper discusses the status quo of various embedded system debuggers ; deeply analyses the overall structure of gdb and the debugging mechanism of gdb based on its source codes ; introduces the gdb ’ s remote debug technique and gdb / mi, which are usually used to develop the gdb - based embedded system debugger 。 then dwells on how to use gdb / mi to develop a gui front and how to use rsp 、 stub and gdbserver to design a debug agent, in order to expatiate on the design method of the gdb - based embedded system debugger 。 in the end, provides a concrete implementation of the gdb - based embedded system debugger of “ embedded simulation development platform ”, the project of the innovation fund for technology based firms 。

    這個特性不僅在將gnu工具移植到一個新的操作系統和微處理器的時候很有用,對于想調試一個基於gnu支持的晶元的嵌入式系統的開發人員來說,也是非常有用的。由於gdb提供了在大多數嵌入式系統上的可移植的、復雜的調試功能,它已成為嵌入式開發的首選解決方案。本文討論了當前的各種嵌入式調試器的現狀,結合源代碼詳細分析了gdb的結構和調試原理,介紹了開發基於gdb的嵌入式系統調試器常用的遠程調試技術和gdb / mi介面;然後詳細闡述了如何使用gdb / mi開發gdb的圖形前端和怎樣使用rsp協議、 stub和gdbserver設計一個調試代理,從而較深入地討論了基於gdb的嵌入式調試器的設計方法;最後,結合國家中小型企業創新基金項目「嵌入式模擬開發平臺」 ,給出了一個基於gdb的嵌入式系統調試器具體實現。
  12. Along with the wave of information and globalization, human being society has already stepped into the knowledge society. the knowledge society is based on the production, distribution and utilization of knowledge and information. in the new era, knowledge increasingly becomes important and to be the most sinificant resource successive to land, labor and capital, which desides the business competitive advantages. for this purpose, enterpris - es have to divert their attention to the resouce of knowledge to get advantages over others in competition in the knowledge economy. in the knowledge economy society, as the dynamic source of the enterprises " innvation, knowledge has become the most scarce resource. it is up to present knowledge storage of firm whether it can catch more opportunities and ways of resource allocation, which contributes to competitive advantages. therefore, the more and the newer knowledge is grasped and invented, the more competitive advantages can be seized. furthermore, enterprises have to maintain their sustainable capability of competition on the ground of assurance that enterprises can effectively manage the process of innovation, inspiration, disseverance and application of knowledge. thus, it is the focus of scholars in the knowledge economy to find the mechanism how knowledge plays its role in business, and to make in - depth researches on the way of knowledge development diversion, dissemination and the law of knowledge

    因此,誰掌握了最新的知識,誰掌握了更多的知識,誰發明和創造了更新的知識,誰生產了包含更多知識的使用價值,誰就能在未來的競爭中取得優勢地位。進一步地,企業為實現持續競爭力,必須以知識的持續積累為條件,以對企業自身所擁有知識從發明、激活、擴散和應用整個過程的有效管理為根本保證。為此,把握知識在企業中發揮作用的微觀機理,對企業開發、轉移、擴散、利用知識的方式和知識管理規律進行深入研究,成為知識經濟時代學者們關注的熱門前沿。
  13. Based on the hydrodynamic energy transport model, the influence of variation of negative junction depth caused by concave depth on the characteristics of deep - sub - micron pmosfet has been studied. the results are explained by the interior physical mechanism and compared with that caused by the source / drain depth. research results indicate that with the increase of negative junction depth ( due to the increase of groove depth ), the threshold voltage increases, the sub - threshold characteristics and the drain current driving capability degrade, and the hot carrier immunity becomes better in deep - sub - micron pmosfet. the short - channel - effect suppression and hot - carrier - effect immunity are better, while the degradation of drain current driving ability is smaller than those with the increase of depth of negative junction caused by source / drain junction shallow. so the variation of concave depth is of great advantage to improve the characteristics of grooved - gate mosfet

    基於能量輸運模型對由凹槽深度改變引起的負結深的變化對深亞微米槽柵pmosfet性能的影響進行了分析,對所得結果從器件內部物理機制上進行了討論,最後與由漏源結深變化導致的負結深的改變對器件特性的影響進行了對比.研究結果表明隨著負結深(凹槽深度)的增大,槽柵器件的閾值電壓升高,亞閾斜率退化,漏極驅動能力減弱,器件短溝道效應的抑制更為有效,抗熱載流子性能的提高較大,且器件的漏極驅動能力的退化要比改變結深小.因此,改變槽深加大負結深更有利於器件性能的提高
  14. The essential elements and process of gas reservoir formation of ordovician in ordos basin have been annalysed systematicly and scientificly by means of the theory and method of organic geochemistry and tectonic geology in this dissertation. the several advanced techniques, such as gas generation thermal simulation, on - line individual gas compounds carbon isotope determination ( py - gc - c - ir - ms ), the analysis technique of light hydrocarbons and biomarkers in natural gas, gas migration simulation and gas carbon isotope determination in fluid inclusions, have been applied to focuse on the study of the gas generation mechanism of souce rock, correlation between gas and source rock, reservoir formation history, migration direction, charging road in detail

    應用有機地球化學和構造地質學理論和方法對鄂爾多斯盆地奧陶系天然氣地質研究中薄弱環節成藏要素和作用進行了系統科學分析。利用烴源巖生氣定量熱模擬技術、熱模擬在線碳同位素實驗技術、氣體輕烴和生物標志物分析技術、運聚成藏物理模擬技術和包裹體中碳同位素分析技術等多種先進的實驗技術對烴源巖的生氣機理、氣源和混合比、成藏史、充注路徑、運移方向和構造作用與成藏關系等問題進行了深入的研究,在前人研究的基礎上,經過本次大量的實驗分析和綜合研究,提出了一些新的認識。
  15. The research for metallogenic evolution mechanism in the region indicates that gold ore formation has undergone three stages : gold elementary source bed formation stage from the neo - archean to the paleo - proterozoic and meso - proterozoic, regional metamorphism - migmatization gold reenrichment stage at the late meso - proterozoic, structure - fluid - gold mineralization stage at the yanshan period

    對礦帶成礦演化機理的研究表明,金礦形成經歷了3個階段:新太古至古、中元古代金初始礦源層形成階段;中元古代末期區域變質混合巖化金再富集階段和燕山期構造流體金成礦作用階段。
  16. It is observed that the industries of the first group and the second group are the superior industries in shandong province. according to the industry groupings analyses, we can make a discovery of a distinguishing characteristic : in shandong province, the industries with the actual competitive power are mostly dispersed over the resource - intensive industries, such as the industries of energy source, foodstuff, textile and etc, they are all the resource - intensive industries, while the industries with the potential competitive advantages are primarily the capital fund and the technology intensive industries, including the industries of electron, pharmacy, mechanism, instrumetation and etc, they are all the capital fund and technology intensive industries

    通過對山東省37個工業行業的量化計算,經分析可以將山東省工業行業分成三組:分別是具有現實競爭優勢的工業行業、具有潛在競爭優勢的工業行業和完全不具有競爭優勢的工業行業,根據產業分組分析,可以發現一個明顯特徵:山東省具有現實競爭優勢的產業主要分佈在資源密集型產業中,如能源、食品、紡織等都屬于資源密集型產業,而具有潛在競爭優勢的工業行業主要是資金技術密集型產業,包括電子、制藥、機械、儀器儀表等都屬于資金技術密集型產業。
  17. The analysis of the large - scale synoptic situation shows that strong precipitation is closely related to the explosion of monsoon and the intensification of cross - equatorial flow which bring a lot of vapor and meet with cold masses at the eastern of northwest district on 8th, june causing extremely heavy rainfall ; that subtropical high - level jet at 200hpa, subtropical high at 500hpa and low - level jet at 850hpa are the weather backgrounds favorable to strong precipitation ; that the pattern of eastern highs and western lows and the establishment of a low - level jet and the coupling between upper - and low - level patterns that determine that the rain occurred in the east of the northwest china ( on average, this is the rainy season for the south of china, but not for the northwest china ) ; that water vapor comes from southerly and easterly flow which converge at the eastern of northwest district with convergence mainly in lower levels and pbl ; that the high value of the whole - level apparent heat source < q1 > is near the area of large rainfall in the direction of northeasterly - southwesterly agreeable to shear line very well and the condensation latent heat releasing is main heat source with vertical advection item playing key role in q1 and q2 ; that there is a vertical secondary circulation crossing low - lever jet whose ascending branch is at the area of large rainfall ; that the construction of convection instability and conditional symmetry instability results that there is not only deep thermal instability, but also moisture influx and triggering mechanism of thermal instability causing strong torrential rain

    作為對比,本文還對2002年6月24 - 25日發生在北京地區的強地形雨進行了分析,並討論陜南、北京地區兩地暴雨的異同點以及地形作用的共性和個性,為兩地暴雨預報提供有益的參考,得出了一些很有意義的結果: 1大尺度環流背景分析表明: ( 1 ) 「 02 . 6 」強降水與6月上旬越赤道氣流和季風爆發密切相關,攜帶大量水汽的偏南氣流與冷空氣於6月8日交匯在西北地區東部,導致了這次強降水的發生; ( 2 ) 200hpa的副熱帶西風急流、 500hpa副高以及850hpa的低空急流的配置非常有利於本文分析之陜西強降水的發展與維持。大尺度形勢分析表明,東高西低形勢場、低空急流的建立和高低空形勢的配置決定了這場降雨出現在西北地區東部。與暴雨區相聯系,存在一支橫越低空急流的經向垂直環流,暴雨區處于該垂直環流的上升支; ( 3 )偏南和偏東氣流水汽通道在西北地區東部交匯,水汽的輻合積聚主要在對流層低層和行星邊界層內完成; ( 4 )整層的視熱源< q _ 1 >高值區在暴雨區附近呈東北-西南向分佈,與切變線走向非常一致,降水產生的凝結潛熱釋放是強降水區大氣的主要熱源。
  18. In the fourth chapter, by the theoretic and comparison, a series of methods improving the venture capital mechanism in china have been put forward, such as : enlarging the financing source, setting up the multi - level financing system, developing more efficient and incentive organization form such as. fund form and limited partnership form. improving the risk control and strengthening management after investment. besides these methods, we should develop different way to reclaim the capital, such as going on the stock market through purchasing or borrowing stock shell and enterprise repurchase, the property exchange market and otc market are also considerable

    如:進一步擴大風險資本來源,建立多層次的資本來源體系;在組織形式上,目前以公司制為主,待條件成熟時積極發展運作效率更高、激勵機制更強的基金制和有限合夥制;加強投資后的管理,改善對投資風險的控制;在退出機制上,提出了應積極發展買殼上市和借殼上市、企業回購、通過產權交易市場和場外交易市場退出等多種退出方式。
  19. For packet loss result from network congestion, rab adopts the same recovery mechanisms as the original tcp ; for packet loss result from link error, it adopts a recovery mechanism which is called immediate recovery, and the value of congestion window of the source is set to a value that corresponds to the available bandwidth

    對于擁塞導致丟包,則採取與傳統tcp協議相同的恢復機制(即窗口減半,並進入擁塞避免階段的線性增加) ,而對于鏈路錯誤導致丟包,則採取立即恢復策略,將tcp源端的擁塞窗口設置為與其估計帶寬相應的數值。
  20. At first, we get the source of heat in high power laser diode and diode ' s characteristics depending on temperature basing on some basic physical concepts and analysis on the mechanism of heat in high power laser diode

    在本文中,首先從基本的物理概念出發,對大功率激光器中熱損耗機理進行分析,得到了大功率激光器陣列中的熱源和大功率激光器的溫度特性。
分享友人