嚙合齒廓 的英文怎麼說

中文拼音 [niègěchǐkuò]
嚙合齒廓 英文
contacting profile
  • 嚙 : 動詞[書面語]1. （鼠、兔等用牙啃或咬） gnaw （at） 2. （侵蝕） erode
  • 合 : 合量詞（容量單位） ge, a unit of dry measure for grain （=1 decilitre）
  • 齒 : Ⅰ名詞1 （牙; 牙齒） tooth 2 （物體上齒形的部分） a tooth like part of anything 3 [書面語] （年齡...
  • 廓 : Ⅰ形容詞（廣闊） wide; extensive Ⅱ名詞（物體的外緣） outline
  1. As a new type gear transmission, double circular arc profile bevel gearing carries out its transmission by means of meshing between convex - concave tooth profile in both of the direction of tooth trace and the direction of tooth depth, so it has advantage of high load capacity, long service life, easy forming hydrodynamic oil film between teeth as well as high quality of running - in etc. therefore, more attention has been paid to its application and research in recent years

    作為一種新型齒輪傳動方式，雙圓弧弧齒錐齒輪傳動不論在齒線方向、還是在齒高方向，均為凸、凹齒廓相嚙合，因而它比一般的弧齒錐齒輪傳動的承載能力高，使用壽命長；並且在嚙合過程中兩齒面間容易形成潤滑油膜，具有良好的跑合性能，所以對它的應用和研究日益受到人們的重視。
  2. Established the system of coordinates of roll testing, getting the parameters of equation of tooth face by solving the non - linear equations set ; according to the differential geometry and meshing principle, deduce the curvature parameters of tooth face and tooth profile, and get the parameters of instantaneous contact ellipse. emulate the contact trace and contact area of the working tooth face, and drawing the instantaneous drive ratio error curve

    建立了克林貝格擺線齒錐齒輪嚙合分析的對滾模型，通過對非線性方程組的迭代求解，得到齒面方程的各個參數;由微分幾何和切齒嚙合原理推導了齒面上齒廓和齒線方向的曲率參數，得到了瞬時接觸橢圓的參數。根據設計參數和機床調整參數繪制了工作齒面的接觸軌跡和接觸區圖形，並求得了瞬時傳動比的誤差曲線。
  3. As both the meshing point and ball ' s center are on the given cylinder, a general method for developing the cam ' s profile is studied. it is proved that the profile of positive and negative transmission is unique if the face gear, the difference between face tooth number and ball number and the diameter of ball are the same. the concrete expression of meshing cam on given spatial cycloid profile, and the characteristics of the profiles are discussed

    論文的主要工作包括： 1 、根據嚙合點和鋼球中心軌跡均在同一圓柱面上的特點，研究了給定端齒齒廓條件下求解凸輪齒廓的一般方法；論證了在給定端齒、齒差數和鋼球直徑相同的條件下，正負齒差嚙合齒廓的唯一性；討論了端齒為球面擺線時，凸輪齒廓的具體表達式，並研究了該齒廓的性質。
  4. 2. the flux characteristics of ordinary helical gear pump are lucubrated by theory for the first time, on this condition the selective qualification of the helical gear pump is gained

    首次對普通斜齒齒輪泵流量特性進行了深入的理論研究，在此基礎上研究了全齒廓嚙合斜齒齒輪泵流量特性，首次得到了完全消除斜齒齒輪泵流量脈動的螺旋角的選擇條件。
  5. On the condition the trapping characteristics of whole profile meshing helical pump are lucubrated by theory for the first time, and the select range of the helical angle that can eliminate completely the trapping of whole profile meshing helical gear pump is also obtained

    在此基礎上，首次對全齒廓嚙合斜齒齒輪泵的困油特性進行了詳細的理論研究，得到了完全消除全齒廓嚙合斜齒齒輪泵困油沖擊的螺旋角的選擇范圍。
  6. The researchful results indicate that the flux pulse ration of ordinary helical gear pump without clearance is less than that of the gear pump with clearence under the condition that the main parameters are same, and the flux pulse ration of ordinary helical gear pump is less than that of whole profile meshing helical gear pump

    研究結果表明：在主要參數相同的情況下，普通斜齒齒輪泵無側隙時流量脈動率小於有側隙時的流量脈動率；全齒廓嚙合斜齒輪泵比普通斜齒輪泵的流量脈動略小。
  7. This paper develops a mathematical model for the solution to the longitudinal tooth curve of an internal gear shaver based on the simplified principle for space transmission of a helical gear pair without flank clearance, and proposes a calculating approach of the profile modification of the grinding wheel to be used for grinding the longitudinal tooth curve of the shaver

    摘要用簡化的空間螺旋齒輪作無側隙嚙合傳動的原理，建立了求解內剃齒刀齒向曲線的數學模型，並給出了修磨這種齒向曲線的盤形砂輪的廓形計算方法。
  8. In this paper, we designed the structure of the gear and rack in this actuating mechanism, elaborated the theory of its formation, and deduced the profile function and gearing function of the gear and rack. furthermore, we deduced the inherent radius of going around a turn under certain circumstance, the condition of the correct gearing and the continuous transmission. in order to make the mechanism move steady, we designed the derivation mechanism and manufacture the modle

    本文對該傳動機構中的漸開線柱齒鼓形齒輪和空間齒條的結構進行了設計，並給出了齒輪和齒條的成型原理，推導出了漸開線柱齒鼓形齒輪和空間齒條的齒廓參數方程、嚙合方程;進一步分析並確定了漸開線柱齒鼓形齒輪、空間齒條在給定嚙合傳動條件下所能實現的固有轉彎半徑和運動約束條件，並對其側隙及效率進行了計算和分析。
  9. Based on conjunction theory, the models for gear manufacturing is developed, and the equation of the gear surface is gained by the equation of rack cutter. the contact line in manufacturing and the tooth profile of the gear is also discussed based on the equation of the gear surface

    本文首先基於齒輪嚙合原理，建立了齒輪加工的模型，由刀具曲面方程推導出被加工齒輪的齒面方程，並進一步推導出齒輪端截面的齒廓方程和齒輪刀具接觸線方程。
  10. Study on mesh theory of roller oscillating tooth gear drive and numerical value simulation of tooth profile contact area

    滾柱活齒傳動的嚙合理論及齒廓接觸區數值模擬
  11. Furthermore, we carry out motion simulation to the spherical gear, gear ' sfluted disc and flexible wrist, thus confirm the theoretical analysing model. 5. we bring forward the generating cutting method based on spherical gear drive, and develop experimental cutting set - up in principle. in theory, the generating mehtod bases that the tooth form of a pair of gear is conjugated

    范成法加工的理論依據在於一對球齒輪的齒廓曲面互為共扼曲面，它們在傳動過程中互為包絡面，如果將其中的一個球齒輪的齒廓做成刀具，另一個為被加工齒輪的毛坯，由機床傳動系統保證兩者之間的嚙合運動，就可以加工出球齒輪。
  12. Firstly, the paper introduces the development and application of computer graphics & image technique, discusses the principle and method of cg and digital image processing, such as matrix of the graphic transformation, homogeneous reference frame, sampling and quantization of the image, file format of the image, template operation, etc. secondly the paper introduces the purpose and method of image enhancement processing, explains the each occasion of those methods such as threshold transformation, smoothing processing, sharpening processing, analyzes and contrasts the processing results of object image. thirdly, the paper introduces the method of mathematics morphologic, edge detection and thinning processing, attains character description of image and character dots of the contour. fourthly, the paper processes the coordinate transformation to character dots and basic splines fitting, imports correlative condition to devise meshing line and meshing track

    本文首先介紹了計算機圖形圖像技術的發展與應用情況，對計算機圖形學和數字圖像處理的一些基本理論和方法如圖形變換矩陣、齊次坐標系、圖像采樣和量化、圖像文件格式、模板操作等內容進行了討論：然後對圖像增強處理的目的和方法進行了介紹，對諸如閥值變換、平滑處理、銳化處理等方法的應用場合進行了說明，並對實物圖像的處理結果進行了分析與比較；接下來介紹了數學形態學方法、對增強后的圖像進行邊緣檢測的方法和圖像的特徵描述方法，並獲取輪廓的特徵點：隨后對獲取的特徵點進行坐標變換，並進行b樣條曲線擬合，引入相關條件生成齒輪副的嚙合線及嚙合軌跡：最後引入等值線和區域填充表示方法，並以等值線和區域填充的形式對弧齒錐齒輪嚙合模擬的載荷分佈情況進行了直觀的表示。
  13. Firstly, based on research of the asymmetric involute gear cutter and the gearing theories, the universal tooth flank curve equations of asymmetric gear with two pressure angles and the tooth transmission curve are derived by the gear shape nomal method, then the fea model of asymmetric involute gear with main parameters is automatically generated with ansys parametric design language ( apdl )

    本文首先建立非對稱漸開線刀具的方程，根據齒形法線法建立非對稱漸開線齒輪的齒廓曲線方程，並利用apdl參數化建模語言建立全參數的非對稱漸開線齒輪有限元模型。討論了非對稱漸開線齒輪的嚙合特性，對非對稱漸開線齒輪傳動特點作了詳細的分析。
  14. On the basis of relationship between meshing rigidity and noise and taking the modification, vibration deduction and noise dropping as the aims, the tooth profile modification was carried out on spur bevel gar by the use of revolving involute curve

    摘要根據嚙合剛度和噪聲之間的關系，以修形減振降噪為目的，用旋轉漸開線曲線對直齒錐齒輪進行齒廓修形。
  15. This paper deduced the involute gear total tooth profile equations of unsymmetric teeth with double pressure angles, proposed the calculation formulas of coordinates and load angle at the upper and lower points of single and double teeth mesh areas, and programmed the relevant parametric programs

    摘要推導出雙壓力角非對稱漸開線齒輪系統全齒廓方程，以及在單、雙齒嚙合上、下界點處坐標和載荷角的計算公式，編制了相應的參數化程序。
  16. The profile equation of whole profile meshing is worked out by the meshing theory, and the numerical calculation program of the new profile is accomplished. the 3d modeling of the gear rotor and the movement simulation of the gear assembly system are realized. the interference and sidegap of gear meshing are analysed by 3d modeling of the gear, so it can be judged that the gear profile is right whether or not before machining

    運用齒輪嚙合原理，推導出全封閉齒廓嚙合型面的齒形方程，完成齒形相應的數值計算程序，並對齒輪轉子進行三維實體造型及齒輪裝配體運動模擬的研究；用齒輪三維造型來進行裝配模擬並分析嚙合副裝配的干涉和側隙，在加工前就能對齒輪齒廓形狀的正確與否進行判斷。
  17. So this paper bring forward several new concepts and new terms, and give the whole defmations to their physical meanings ; advance the conditions of right gearing mesh and continuous drive ; prove out that a pair of ring involute tooth forms are conjugated and that they can achieve precise spherical motion of constant transmitting ratio employing the space mesh theory

    為此，本文首次提出了球齒輪傳動中若干新概念，新名詞，並對物理含義作了完整的定義；提出了球齒輪機構的正確嚙合條件和連續傳動條件；利用空間嚙合理論，證明了一對漸開線環形齒廓互為共軛齒廓，能實現精確的定傳動比球面運動。
  18. Based on the action and the capability need of polymer gear pump in oil chemical engineering, the idea of whole profile meshing of polymer gear pump is advanced for the first time

    基於聚合物齒輪泵在石油化工生產中的作用和性能要求，本文首次提出聚合物齒輪泵的全封閉齒廓嚙合型面的概念。
分享友人
分享到 Line

分享到臉書