比例壓力閥 的英文怎麼說

中文拼音 [bǐlìyālìfá]
比例壓力閥 英文
proportional pressure valve
  • 比 : Ⅰ動詞1 （比較; 較量高下、 長短、距離、好壞等） compare; compete; contrast; match; emulate 2 （比...
  • 壓 : 壓構詞成分。
  • 力 : Ⅰ名1 （力量; 能力） power; strength; ability; capacity 2 [物理學] （改變物體運動狀態的作用） forc...
  • 閥 : 名詞1 （指在某方面有支配勢力的人物或家族） established house or power group; a powerful person or...
  • 比例 : 1. （長度上縮小和放大的倍數） scale; scaling 2. （比率） proportion; ratio; proportionality
  1. The improvement system is made up of the pressure sensor, flow sensor, displacement sensor, electro - hydraulic proportional flow control valve, power amplifier, data gathering board and computer. the platform can carry out testing the hydraulic parameters, processing the tested data, saving the processed data and drawing, adjusting the pressure automatically

    改造后的測控系統主要由壓力傳感器、流量傳感器、位移傳感器、比例節流閥、功率放大器、數據採集卡和計算機組成。改造后的實驗臺具有自動採集實驗數據、自動處理實驗數據、自動保存實驗數據、自動調節液壓系統負載壓力等功能，大大提高了實驗臺的工作效率、測試精度和智能化水平。
  2. Proportional valves to continuous, proportional to the implementation of components of the control, speed and direction, pressure and can prevent or to the exchange rate changes and the impact of the phenomenon of simplified systems to reduce the usage of components

    比例閥能連續地、按比例地控制執行元件的力、速度和方向，並能防止壓力或速度變化及換向時的沖擊現象簡化了系統，減少了元件的使用量。
  3. User can chang it freely. the signals sampled on hardware interrupt assure the real - time property and control reliability. chapter 4 first analyzes the basic characteristics of electropneumtic proportional / servo cushioning controlled system, especial study the influence of the valve dead zone, system friction and saturation phenomenon

    第四章首先將電-氣比例伺服控制引入到緩沖控制中，分析了系統被控對象的基本特性，著重分析了氣源壓力變化、閥口死區、系統摩擦力特性和氣路飽和現象對控制系統的影響。
  4. The nonlinear problem is ubiquitous and is difficult to solve in electro - hydraulic servo system. it is caused by the throttling property, because of the existing of the servo valve, proportion valve and throttling valve, by the dead band, the back lash and so on

    非線性是電液伺服系統中普遍存在且至今沒有很好解決的問題，這些非線性主要由電液轉換和控制元件（伺服閥、比例閥或節流閥）的節流特性和液壓動力機構的滯環及死區等因素引起。
  5. The experiment acquired pressure distribution and circulating rate under three fluidizing velocity ( 3. 5m / s 、 4. 5m / s 、 5. 5m / s ) and different media load. an experimental equation was acquired between circulating rate and the distribution of the pressure. and the relation between the circulating rate and the opening rate of the valve connecting the returner and the ehe was carefully discussed as well as the relation between the pressure of the ehe and the flow rate of the fluidizing air

    得到三種流化風速下（ 3 . 5m / s 、 4 . 5m / s 、 5 . 5m / s ）不同裝料量所對應的主床床體壓力分佈和物料循環量，得到循環量與壓力的分佈和流化風速的本實驗臺上的經驗公式，並通過測量返料器通向外置換熱器機械閥開度和返料量的關系，得到旋風分離器中下落物料進入換熱器和直接進入主床的比例關系，同時測得換熱器中壓力和送風量的關系。
  6. Air filtration portfolio, air filters, valve, oil mist machine, filter valve, oil mist separator, micro - mist separator, stability activated solenoid valve, pressure gauge, micro - valve and vacuum valves, links the release of the closure - pressure valves, and pipe connection, a one - way valve, t - shelves, shelves, brackets, diaphragm - type flow switches, blades type flow switches, further growth actuator, the valve lock, precision valve, pressure switches, mechanical pressure switches, pneumatic control ratio positioning devices, and electric - gas ratio positioning devices, and telecommunications - pressure converters, electro - pneumatic proportional valve, filter valve, shuttle valve, gas - electric relay and gas indicator, delay pneumatic valve and cylinder fcl, plumbing fcl, mufflers and exhaust cleaner, the excess flow valve with silencer, a one - way valve, rapid valve, rapid joints, rapid valve with fcl, rapid joint sub - cluster gas, micro joints, gas pipes, pipe from the devices, and helical coils, pipes, channels, scissors, multiple fastener, high - speed rotary joint, 10000 threaded joints, and insert the tube joints, rotary joints began, 68. 25 rapid joints and hoses, hose fittings and rapid non - electrostatic

    空氣過濾組合空氣過濾器減壓閥油霧器過濾減壓閥油霧分離器微霧分離器穩定啟動電磁閥壓力表微型減壓閥減壓氣閥三通釋放式截流閥壓力開關管接頭單向閥t型隔板隔板托架膜片型流量開關漿葉型流量開關增速繼動器鎖定閥精密減壓閥壓力開關機械式壓力開關氣控比例定位器電-氣比例定位器電訊號-氣壓轉換器電-氣比例閥過濾減壓閥梭動閥氣-電繼電器氣源指示器氣動延時閥氣缸限流器管道限流器消聲器排氣潔凈器限流閥帶消聲器單向止回閥快速排氣閥快速接頭快速排氣閥帶限流器快速接頭集束分氣微型接頭氣喉管喉管脫離器螺旋管排管管道剪刀多管扣件高速旋轉接頭萬用螺紋接頭插入式管接頭旋式緊鎖接頭難燃性快速接頭和軟管不帶靜電快速接頭和軟管
  7. The proportional relief valve is used to adjust control the pressure of hydraulic oil, therefore controls the brake moment by adjusting the thickness of oil film

    用電液比例溢流閥對控制油壓進行調節，從而調節油膜的厚度來控制制動力矩。
  8. A on - identify model of proportional valve pressure controlled system was established though analyzing the configuration of dbetr type proportional pressure relief valve firstly, and then using classical step response method to identify system parameter, a practicable system simple model was deduced at last

    摘要從dbetr型比例壓力溢流閥結構出發，先建立比例閥控制壓力系統的待辨識模型，再採用經典的階躍響應法辨識系統參數，得到工程上適用的系統簡化模型。
  9. Until now, there have had the single way proportional valve controlling the power or the route, double way ratio valve controlling the orientation. they cover flux control, pressure control, velocity control and position control. according to these functions, ratio amplifier has single way or double ways type amplifier

    由於比例閥已經發展出單通道力、行程控制比例閥，雙通道方向控制比例閥，廣泛用於流量、壓力、速度、位置控制等環節中，比例放大器也本著這些功能研製出了單、雙通道的比例電控器。
  10. The load method of the system is that installing a throttle ahead of a proportional overflow valve, and the throttle can prevent the effect of the pressure impulsion upon sensors and meters

    本論文所述系統的加載方法是在比例溢流閥前裝一個節流閥，利用節流閥來阻止溢流閥產生的壓力沖擊對傳感器及儀表的影響。
  11. With the development of test - machine technology, in recent years electro - hydraulic universal material test - machine of the country inside and outside develops three different control modes : electro - hydraulic servo valve ' s control ; adopted the pressure valve ' s control with speed controller ; proportion valve ' s control of wide flux

    隨著試驗機技術的進步，近年來國內外電子液壓萬能試驗機發展了三種不同控制方式：電液伺服閥控制、採用具有速度控制器的壓力閥控制和寬流量范圍的比例閥控制。
  12. And then, a method of load - flow low - pressure measurement was proposed in the light of the hydraulic - resistance theory of servo valve. the validity of the method was proved by the experimental results. therefore, the measurement of the characteristic of load - flow and no - load flow can be realized by using this method

    然後根據電液伺服閥的液橋理論提出了一種負載流量低壓測量方法，在所開發的測試系統上，利用電液比例閥模擬流量測量裝置對所提出的方法進行了試驗驗證，實現了利用低壓流量計和壓力傳感器進行電液伺服閥負載流量特性和空載流量特性的測量。
  13. This paper studies the operational capacity and performance of the valve in detail, and determines main influencing factors of its steady - state characteristic

    論文詳細研究了水壓比例節流閥的工作能力和性能，確定了影響其穩態特性的主要因素。
  14. This paper analyses the type, function and characteristics of usual proportional control valves and raises a new modificative version in the light of their drawback. that is, basing on the principle of flow amplification and electrical feedback and throughout calculation and analysis on flow closed loop control and pressure flow combination., determination of the minimum controlled pressure difference as well as flow controlling range and structure of main valve and research of the dynamic and static characteristic, the paper puts forward control principle of " flow - load pressure change - displacement revision " and pressure / flow double closed loop, and further expounds that using a proportional controller and a electric mechanical transducer can separately serve the control function of pressure or flow as well as flow pressure combination

    本論文分析了目前常用比例閥的類型、功能、特性，並針對其不足提出新的改進方案，即：以流量放大，電反饋兩個原理為基礎，通過對流量閉環控制及壓力流量復合的計算分析、確定上最小控制壓差及流量控制范圍，確定主閥結構、功能特性研究等，提出了「流量? ?負載壓力變化? ?位移修正」的控制原理和壓力流量雙閉環控制原理，並進一步論述了利用一個比例控制器和一個「電?機械轉換器」就可完成獨立的壓力或流量控制功能以及流量壓力復合控制功能。
  15. This constant - pressure hydraulic power adopts plvc4 programmable logical controller for valve to control the electro - hydraulic proportional relief valve to adjust the pressure at the entrance of the servo valve and makes it change with the pressure change at the exit thus to keep the pressure difference constant

    此恆壓油源採用閥用可編程式控制制器plvc4控制電液比例溢流閥調節伺服閥入口壓力，使其跟隨伺服閥出口壓力變化，達到入出口壓力差值恆定的目的。
  16. Hydraulic fluid power ; proportional and servo valves ; definitions, symbols, units

    液壓流體動力.比例控制閥和伺服閥.定義符號和單位
  17. That is, through analysis of the principle on flow control and " hydraulic transistor ", design and calculation of flow control characteristic as well as main parts in valve inner chamber, a piloted reducing valve will be installed between main valve and pilot valve. after a pressure - difference compensating reducing valve was added in the non - pressure compensating piloted reducing valve of the flow control valve in vlalvistor valve, the calculation on control characteristic emulation and load characteristic emulation has been carried out. the result of the calculation shows that after pressure compensating reducing valve was added, the linearity of the control characteristics has been greatly improved thus eliminating influence upon outlet flow by load pressure - change of the hydraulic system and improving performance characteristics of the hydraulic component

    文章還在對瑞典valvistor閥的插裝比例閥研究的基礎上，提出了一種新的流量控制原理，即：通過對流量控制和「液壓晶體管」原理的分析、流量控制特性及閥內腔主要結構件的設計計算，在主閥和導閥之間增設先導減壓閥，並進一步對valvistor閥的流量控制閥之無壓力補償先導減壓閥、加入壓差補償減壓閥后的控制特性進行了模擬計算和負載特性模擬計算，結果表明：增設壓力補償先導增壓閥后，其控制特性曲線變得非常線性，從而消除了液壓系統負載壓力變化對主閥輸出流量的影響。
  18. As the demand for their high quality and good outline is increasing, the hydraulic control system of molding machine must be able to offer accurate pressure and flow control at the same time to its injection system

    集壓力、流量比例調節於一體的電液比例壓力流量復合控制閥（簡稱pq閥）以其復合程度高、控制性能好、節能等特點在注塑機液壓控制系統中得到了日益廣泛的應用。
  19. The dynamic performances of the force and location adjusted fashion are satisfactional. the results of theory and experiment are consistent. the results of experiment express the dynamic performances of the hyd raulic hitch are satisfactional to tractor

    試驗結果表明，採用比例閥的液壓懸掛系統位調節和力調節都具有良好的靜動態性能，並且與理論分析結果一致，因此能達到對拖拉機農具控制的靜動態品質要求。
分享友人
分享到 Line

分享到臉書