溫度確定 的英文怎麼說

中文拼音 [wēndùquèdìng]
溫度確定 英文
temperature determination
  • 溫 : Ⅰ形容詞（不冷不熱） warm; lukewarm; hot; gentle; mild Ⅱ名詞1 （溫度） temperature 2 （瘟） acute ...
  • 度 : 度動詞[書面語] （推測; 估計） surmise; estimate
  • 確 : 形容詞1. （符合事實; 真實） true; reliable; authentic 2. （堅固; 堅定） firm
  • 定 : Ⅰ形容詞1 （平靜; 穩定） calm; stable 2 （已經確定的; 不改變的） fixed; settled; established Ⅱ動詞...
  • 溫度 : [物理學] temperature
  • 確定 : 1. （明確地定下） define; fix; determine; ascertain 2. （明確而肯定） definite; certain; for sure
  1. Different factors influencing the effect of antibiosis finishing for knitted socks are experimented ; including concentration of finishing agent, dipping temperature, dipping time, baking temperature, baking time and bath ratio

    摘要通過實驗確定整理劑濃度、浴比、浸漬溫度、浸漬時間、焙烘溫度和焙烘時間對滌棉針織襪抗菌防臭整理效果的影響。
  2. In this thesis, used thermocouple to sense the temperature in the space of the hearth, attributed the thermocouple based on calorifics and scientific arithmetic, acquired data by data acquiring card, processed data according to the demand of setting up temperature model and drawing graphics and then caculated the coordinates of isothermal points and normals of isothermal facets, ascertained the order of connecting points and the model of construct, drawed the isothermal facet of temperature field with opengl at last

    通過數據採集板卡進行數據採集並與計算機介面進行數據處理。然後，將處理后特殊點的溫度數據依據marchingcubes演算法建立數學模型求取等溫面上的點的坐標及各點的法向量等。最後，確定計算的三維坐標點的連接順序和拓撲模型，利用opengl進行等溫面的繪制、消隱和模式變換等工作。
  3. Safety of machinery - temperatures of touchable surfaces - ergonomics data to establish temperature limit values for hot surfaces

    機械安全可接觸表面溫度確定熱表面溫度限值的工效學數據
  4. Safety of machinery. temperatures of touchable surfaces. ergonomics data to establish temperatur limit values for hot surfaces

    機械的安全性.可觸摸表面的溫度.確定熱表面溫度極限值的人機工效學數據
  5. The models were validated with adopting local weather ( average temperature per month, average maximum temperature per month ; average minimum temperature per month ; sunlight times per month, and latitude ), varieties, and experiment data from different yielding levels in nanjing and jinan areas, the correlation coefficient, standard error of absolute deviation, and average absolute deviation between the observed and the stimulated were 0. 9761 and 0. 9620 with 0. 01 significant level, 0. 5891 and 0. 7094, and 0. 12 and 0. 43, respectively

    所建模型可以利用當地常年氣象資料（ 30年平均值，如月平均氣溫、月平均最高和最低氣溫以及月日照時數、緯度） ，確定不同地區、產量水平與品種最適葉面積指數動態，為小麥數字化栽培提供科學依據。
  6. Rhl - 2000b is a circulatory exosomatic heating system used for intra - peritoneal hyperthermic perfusion iphp of chemotherapy. the system has a peristaltic pump and a microwave heater, which could provid continual circulatory heating for chemotherapeutic drug and saline water. several pipe with electronic thermometry at entrance or outlet convey the heated

    運用熱化療灌注機的體外加熱裝置，將熱效應好的化療藥物和鹽水加熱到45 ，運用體外循環泵將其導入體腔內，並且持續循環通過測溫系統監測出水口，入水口和體腔內的溫度，確保體腔內的溫度維持在42 - 43的治療溫度，並且維持一定的時間，以達到使腫瘤細胞凋亡並沖出體外的方法。
  7. Through the analysis and studying of this subject, we can make conclusion as followed : during the whole heating season, the change law of the energy consumption of the thermal bridge is with the change law of the meteorological condition inside and outside the room : when airs temperatures indoor is steady, thermal bridge energy consumption increases with reducing of air temperature outside the room, reduce oppositely. the different position and the different structure patterns of the thermal bridges, even under the same meteorological condition inside and outside of the room, energy consumption of the building is different, and impact on heating energy consumption is different, this is mainly caused by the difference of the constructs thermal bridge and different influence in term of out wall, which lead to total mean heat - transfer coefficient different, when the heat - transfer coefficient is relatively small of outer wall, the impact of wall body is more obvious on heat - transfer coefficient of the thermal bridge

    然後確立了在節能建築中熱橋耗熱量與室內外氣象參數和熱橋構造型式的關系，分析與研究並得出：在整個採暖季節中，熱橋的能耗隨著室內外氣象條件的變化規律是：在室內空氣溫度一定時，熱橋能耗隨著室外空氣溫度的降低而增大，相反減小；不同部位的熱橋，其構造型式不同，即使在相同的室內外氣象條件下，產生的能耗也是不同的，並且對採暖能耗的影響也不同，這主要是由於不同構造的熱橋對外墻的總平均傳熱系數的影響不同所造成的，並且當外墻主體的傳熱系數較小時，熱橋對墻體的傳熱系數的影響更加明顯。
  8. Temperatures checked and recorded daily by a designated individual, and found to be in specification

    指定的人員每天檢查和記錄溫度，確定溫度在規定范圍之內。
  9. Through field investigation and analysis indoor, with studying all hydrochemistry data in detail, including macro components and micro components, the author finds out the hydrochemistry feature of ground water. for further specifying the ground water system, with cluster analysis of macro components of surface water and ground water in total 147 samples and the analysis of micro components, including ree, the main ground water systems are distinguished by and large, especially the ground water system main of fault no. 7 and fault no. 15 water bearing belts which have differences at macro and micro components between the two ground water systems, moreover, the main hydrogeochemistry effects are established such as lixiviation, oxidization, precipitation and mixing effect, especially the mixing effect which result in the complexit y of the hydrochemistry of deep bearing tectonic fracture water. based on them, the hydro geological model of upper dam base is established, meanwhile the author summarizes the hydrochemistry feature of weathering crevice water, surface tectonic crevice water and deep tectonic crevice water

    為此，本文以大崗山壩區水文地球化學問題為研究對象，通過野外調查和室內分析，詳細的研究了壩區水化學資料，包括宏量組分、微量組分，查明了壩區地下水水化學特徵，對採集的147個地表及地下水樣的宏量組分進行聚類分析，結合微量元素，稀土元素的研究，並應用二氧化硅地熱溫標確定了深部構造裂隙水的熱源深度，基本區分了壩區各個主要地下水水系，特別是以f7 、 f15斷裂含水帶為主的地下水系，它們的宏量組分、微量組分以及稀土等方面均存在差異，以此為基礎，結合壩區水文地質條件，建立了壩區的上壩址的水文地質模型，同時通過分析了壩區花崗巖區的水化學資料，確立了壩區主要的水文地球化學作用，分別為：溶濾作用、氧化作用、沉澱作用、以及混合作用，混合作用是導致深部承壓裂隙水水化學復雜的主要原因，並總結了壩區風化裂隙水、淺部構造裂隙水、深部構造裂隙水的水化學特徵。
  10. Using smoluchowsky and mooney ' s rheology theory we analyze that without magnetic field 77 will increase as s andv increase ; using the rosensweig ' s formula and hydromechanical theory, we can illustrate that in the magnetic field and the outside temperature being certain, 77 will increase as the magnetic field increase, when the magnetic fluid ' s s and v are determined

    在外磁場的作用下，綜合rosensweis公式及流體力學理論很好的解釋了在外界溫度一定時，基液質量百分比濃度s和磁性微粒體積分數人確定的磁性液體，其粘滯系數司隨外磁場的增加而增加的原因。
  11. Because mz interferometric optical fiber gyroscope has bigger nonreciprocal phase, the system thermal stability, polarization noise and the error caused by the fluctuation of light source is particular analysed, some effective methods is proposed such as : using the " quasi - white - light " interferometry and the fiber polish technology accurately to control the fiber length, using depolarization light to minish the polarization error, and using temperature control, optical power control and depolarizer to stabilize the output of the light source

    結合mz干涉式光纖陀螺的存在較大非互易相移的特點，著重從其溫度穩定性、偏振噪聲以及光源波動引起的誤差三個方面分析了抑制噪聲、提高檢測精度的方法，提出了：採用「準白光」干涉測量法結合光纖研磨技術精確控制光纖長度差的辦法；採用非偏振光源抑制偏振噪聲的方法；採用溫度控制、功率控制以及消偏器實現穩定化陀螺光源的方法。
  12. The dma 38 requires very little sample and performs a measurement quickly and accurate to 3 - digits. a built - in solid state thermostat automatically ensures stable measuring temperatures between 15 and 40 c

    Dma 38要求極少的樣品量，測量快速且精確度可達3位數。內置一個固態自動調溫計以確保測量溫度穩定在15 - 40 c
  13. A new measuring instrument for melting and crystallizing temperature of smelting slag is designed by adopting advanced microcomputer technology, micro - controller technology, and computer image processing technology in order to accurately and efficiently measure physical features of smelting slag, e. g. melting temperature, flowing temperature, crystallizing temperature, and crystallizing rate, etc

    設計了一種採用先進的微型計算機技術、微控制器技術、計算機圖像處理技術相結合的冶金爐渣熔化結晶溫度測定儀，能夠準確高效地測試冶金爐渣等材料的熔化溫度、流動溫度、結晶溫度、結晶率等物理特性。
  14. Based on the homogenization temperature of inclusive, confirm two migrating periods existing

    根據包裹體均一溫度確定了油氣主要運移時期有二期。
  15. High resolution 0. 01 results in accurate temperature measurement

    高分解能0 . 01正確溫度測定出來。
  16. Easy for operation with cpu control system, there auto - fill water into water tank / heater system and water level auto - controlled system in the machine so that it can be operation in order, keep right temperature with auto - controlled system during the machine operation

    Cpu電腦板控制系統，操作簡便，水箱加熱器自動注水，自動水位控制，確保運轉正常，自動溫控裝置保持溫度恆定
  17. It is given that quantitative diagnosis to estimation errors of internal temperature of a hot wire embedded at the center of a cylinder - shaped heat equipment

    摘要對採用紅外監測反推法，由加熱圓柱外壁溫度，確定圓柱體內壁溫度的誤差進行了量化分析。
  18. In addition, at this strong coupling, heavy inertia, non - linear, uncertain system, it initial proposes and adopts multi - mode segmented intelligent fuzzy control strategy. the control strategy was carried on the simulation experiment by the data making through producing the scene, having made the good control result. considering still that change of environmental temperature impacts on temperature of steel pipe, in which fbe is colloidized, it put forward the method of adjusting temperature setting value according to environmental temperature

    另外文中又對這一強耦合、大慣性、非線性、不確定系統，提出了採用智能模糊多模態分段控制策略，通過在生產現場取得的數據對該控制策略進行模擬研究，取得了良好的控制效果；還考慮到環境溫度變化對fbe膠化時鋼管溫度的影響，提出了依據環境溫度變化調整溫度給定值的方法，模擬證明了該演算法的有效性。
  19. Usually, it is thought that the lasing wavelength of a fgesl is locked at the bragg reflection wavelength of fiber grating ( fg ). owing to a relatively small dependence of the reflection spectrum of fg on ambient temperature ( - 0. 01nm / c ), the lasing wavelength of a fgesl is thought to behave more stable than that of a dfb - ld

    由於fgesl的激射波長主要由光纖光柵（ fg ）的布拉格波長確定，因此選擇具有合適布拉格波長的fg就能使fgesl的激射波長處于預置波長處；同時，由於fg的布拉格波長受溫度變化的影響相對較小（ 0 . 01nm ） ，因此fgesl與dfb - ld相比具有更高的溫度穩定性。
  20. Highly recommended for mass production. guaranteed superior quality with accurate pressure, temperature, and time control

    適用於大批量產品的生產。具有壓力均衡、溫度穩定、時間控制精確、加熱板升降速度可隨意調節等特點。
分享友人
分享到 Line

分享到臉書