負載電容 的英文怎麼說

中文拼音 [fùzǎidiànróng]
負載電容 英文
load capacitor
  • 負 : Ⅰ名詞1 （負擔） burden; load 2 （虧損） loss 3 （失敗） defeat Ⅱ動詞1 [書面語] （背） carry on th...
  • 載 : 載Ⅰ名詞（年） year : 一年半載 six to twelve months; six months to a year; 三年五載 three to five ...
  • 電 : Ⅰ名詞1 （有電荷存在和電荷變化的現象） electricity 2 （電報） telegram; cable Ⅱ動詞1 （觸電） give...
  • 負載 : [電學] load
  • 電容 : electric capacity; capacitance; capacity
  1. In order to eliminate the influence of the output filter capacitor current on the grid current, a novel control strategy for the grid - connected inverter in grid - tied and off - grid modes is proposed. the control strategy can also realize seamless transfer between grid - tied and off - gird modes. the grid - connected inverter can supply power to the critical load when the grid is off

    本文針對傳統並網控制策略進網電流受輸出濾波電容電流影響的問題，提出了一種新的並網控制策略，該控制策略能基本消除輸出濾波電容對進網電流的影響，實現獨立與並網兩模式之間的無縫切換，對關鍵負載起不間斷供電的作用。
  2. In the positioning servo - system, which generally is configured by the d. c. pulse width modulator ( pwm ) velocity governing system and position servo - loop, the parameter perturbance of pwm velocity loop really exist by reason of such as the load behavior ; power voltage supply ; operating setting value, etc. 1, 2 ， and it cannot be ignored. by using the identification technique to form the mathematical model of the system, authors have confirmed the facts. therefore, to design the discrete sliding mode controller ( dsmc ) of the positioning servo - system, the perturbed parameters value bounds of the pwm velocity loop, which is as the controlled plant of position servo - loop, should be accounted. consequently, the design principle of dsmc for accounting system with parameter perturbance is proposed by the authors. the proposed method can ensure the stability of system with parameter perturbance and the behavior of non - overshoot, fast precise positioning. in order to reveal the effects of the design method, the comparative research work is done by the authors. also, it has been tested in an industrial experiment, the results proved it is satisfactory

    由直流脈寬調速系統（ pwm ）和位置環構成的定位系統中，速度環的參數隨負載特性；電網電壓；給定工況而攝動是不容忽視的.作者通過系統辨識建模也證實了這一事實1 ， 2 .因此在設計位置環的離散滑模控制時，必須針對速度環（即位置環的控制對象）的參數攝動范圍採用「對象參數攝動離散滑模控制器的設計方法」 ，以確保系統在參數攝動時的穩定性和快速、無超調、準確定位的優良動態品質.為剖析該設計方法的控制效果，本文作了對比性研究，並將該設計方法用於工業試驗中，取得了滿意的結果
  3. Skj ( jjw ) series of ac purifying regulated power supply, incorporating functions of regulation and auti - inter ference, designed and muters, xerox, video equipments, medical instrmments and other electr onicinstrmmerts and autocontrol systems for is wide vange of regulating, high precicion, quickacting, high effciency, small itcan restrain restrain sharp voltageand protect from moise of electric power net

    系列進精密凈化電源是當今國際上普遍採用的現代電源調節技術，配以大容量濾波器與集成化控制系統構成；它具有如下特點：可靠性好、效率高、優良的動（瞬）態，體積小、重量輕、噪音低、負載適應能力強；適用於對電源要求較高的儀器或設備。
  4. The work principle of dual stator - winding induction generator system, and the researches on practical application of dual stator - winding generator system are analyzed in detail. aimed at the work condition of wide rotor speed and optimization of static reactive power generator ’ s volume, the performance of dynamic state and static state and optimal control of high - voltage dc generator system based on dual stator - winding induction generator, are studied in this paper. these researches not only achieve the work characteristic of dual stator - winding induction generator system, but also set up the foundation of optimal design of dual stator - winding induction generator and engineering realization of dual stator - winding induction generator system used in wind generating

    本文闡述了定子雙繞組發電機的基本工作原理，基於matlab軟體建立了定子雙繞組感應電機發電系統的模型，並在此基礎上詳細分析了定子雙繞組感應電機發電系統的工作機理、影響兩套定子繞組容量比的因素等，從而摸清了該系統的特性，尤其是定子雙繞組感應電機高壓直流發電系統在變轉速、變負載下工作的特性，從而為該系統的工程實現奠定了重要的理論基礎。
  5. In some military application such as aviation 、 space flight 、 missile 、 radar and so on, the 10kv isolation voltage is needed, on the basis of it, linearity, capacity of driving load capacitance and reliability are presented

    同時，在航空航天、導彈、雷達等軍事應用上，對光電耦合器提出了10kv以上的隔離電壓的要求，在此基礎上，對線性度、驅動容性負載的能力以及可靠性都有很高的要求。
  6. Zero - voltage turn - on and zero - voltage turn - off in lagging arm and leading arm of soft - switching topology, working waveform of power transformer and process of rectifier and transition are presented in detail. the influence of resonant inductance of the power transformer, resonant capacitor and variation of load to the process of soft - switching are given

    主要對軟開關滯后橋臂和超前橋臂的零電壓開通、關斷過程，功率變壓器的工作波形及整流換流過程進行了詳細的模擬分析，並重點討論了逆變器的諧振電感、諧振電容以及負載變化對軟開關過程的影響。
  7. The key items include the car sinking, constant speed characteristics, inspection function, auto relevelling function and level accuracy, etc. the research contents focus on the following three parts : firstly, research on effects of system parameters on car sinking has been completed. secondly, the constant speed performance with the compensation of internal leakage of pump / motor is improved. lastly, research on improvement of the car level accuracy and contrast to that of traction elevators is presented, and the reasons of low car level accuracy of hydraulic elevators are discussed

    重點研究了三方面內容：一是研究了停層沉降特性及影響電梯轎廂停層沉降特性的各種因素；其次是通過負載壓力補償液壓泵馬達內泄漏來改善電梯轎廂速度穩定性；最後是液壓電梯平層精度的理論和實驗研究，並與曳引電梯的理論模型進行了對比，闡述了液壓電梯平層精度低的原因，理論探討了影響液壓電梯平層精度的主要因素。
  8. As the basis apparatus components, which are use to switch on and switch off main circuit or big capacity control circuit, ac contactors are widely used in control of electromotor and other power load

    交流接觸器是一種用來頻繁的接通和切斷主迴路或大容量控制電路的電器，廣泛應用於控制電動機和其它電力負載。
  9. It ' s high - frequence noise absorption, absorption of noise caused by rapid rise of front and self - reset function have widespread application in imput of supply, for absorption of inductive load switching surge voltage and for protection of two - way thyristor switching device, bypass capacitors, micro - machines and the others

    它所具有的吸收高頻噪聲、前沿快脈沖上升噪聲及自復位功能，使其在電源輸入端、吸收電感性負載開關浪涌電壓、保護雙向可控開關器件、旁路電容器、微型電機等方面有著廣泛的用途。
  10. Bus capacity is the maximum load that can be carried on a system without causing degradation of the generator frequency to less than a prescribed level ( usually 59 hz in a 60 hz system )

    母排容量母排容量是指在發電機頻率不被壓低的情況下，系統所能帶動的最大負載。
  11. Combined with researches on propagation characteristics, the micro - current sensor for on - line pd monitoring is developed and the effects of coil number, stray capacitance and loading resistance on pass - band and sensitivity are also studied

    同時，結合傳播特性，研究了局部放電在線監測寬帶微電流傳感器，並就線圈匝數、雜散電容和負載電阻等對傳感器通頻帶、靈敏度等性能參數的影響進行了分析。
  12. Five different structures are described : standard transformer coupling, parafeed, resistively loaded stage capacitively coupled to the output transformer, tube ( valve ) based constant current source load capacitively coupled to the output transformer, and solid state ( mos fet ) constant current source load capacitively coupled to the output transformer

    我們將討論五種不同的方式：標準變壓器耦合；旁饋耦合；電阻性負載電容性耦合至輸出變壓器；膽恆流源負載電容性耦合至輸出變壓器；以及晶體管恆流源負載電容性耦合至輸出變壓器。
  13. In order to avoid the current ripple and the high switch frequency of fixed - band hysteresis current controllers, two hysteresis controllers of change hystersis - band are proposed. one is the sinusoidal - band hysteresis current controller, the other is the adaptive hysteresis current controller based on fuzzy theory

    由於常規的滯環電流控制器不能有效地防止負載電流脈動，並且存在著容易導致逆變器的開關器件的開關頻率過高的問題，論文提出了兩種變環寬滯環電流控制器結構，其一是正弦環寬滯環電流控制器，其二是模糊變環寬滯環電流控制器。
  14. To avoid the actuator, a capacitor load being charged up by the drift current of the amplifier, a secondary feedback from the output of the amplifier has been used and expected result has been gotten

    針對驅動器輸出電流漂移造成的壓電作動器（容性負載）電荷積累，文中引入了抑制驅動器電流漂移的反饋環節，取得了預期的控制效果。
  15. Output buffer is realized by the feedback application of amplifier which can drive big load capacitor. the av of amplifier is more than 70db, phase - margin of it is more than 70 degree, psrr of it is more than 50db

    單位增益緩沖器是具有驅動大負載電容能力的運算放大器的反饋應用，該運算放大器的增益大於70db ，相位裕度大於70度。
  16. Low power design of the hardware is divided into two levels : device level and system level. in device level, low power design mainly focuses on decreasing load capacity and leaking current

    硬體低功耗設計有兩個層次:器件級的低層次設計主要關注減少負載電容和漏電流;系統級的高層次設計主要關注減少無用的邏輯和無用的電路活動。
  17. Dynamic power is dominant component of the average power dissipation in cmos circuits. and the value of dynamic power is determined by node capacitance, supply voltage, clock frequency and switching activity of cmos circuits. so most low power designs are achieved by reducing one or more those above parameters

    由於cmos電路的功耗與cmos電路的負載電容，電壓，時鐘頻率及開關活動性有關，因此在低功耗cmos觸發器設計過程中，許多低功耗設計技術都可以歸結到通過減小上面的參數來達到低功耗的目的。
  18. The load capacitance cl is the capacitive load of the oscillating circuit as seen from the pins of the crystal

    我理解為：負載電容cl是指從晶體兩腳往晶元里看的振蕩電路的電容負載。
  19. Sub - array and subsection decoding reduce the load capacitance of bit line and word line and enhance the speed of sram simultaneously

    存儲陣列分塊技術以及分段譯碼技術降低了sram位線和字線的負載電容，從而提高了sram的速度。
  20. The method measuring the lead - to - lead and loading capacitance of package leads

    封裝引線間電容和引線負載電容測試方法
分享友人
分享到 Line

分享到臉書