順序連結 的英文怎麼說

中文拼音 [shùnxùliánjiē]
順序連結 英文
sequence interlock
  • 順 : Ⅰ介詞1 （向著同一個方向） in the same direction as; with 2 （依著自然情勢; 沿著） along; in the d...
  • 連 : Ⅰ動詞1 （連接） link; join; connect 2 （連累） involve （in trouble）; implicate 3 [方言] （縫） ...
  • 結 : 結動詞（長出果實或種子） bear （fruit）; form （seed）
  • 順序 : 1. （次序） plain sequence; subsequence; order; sequence; succession2. （順著次序） in proper order; in turn
  • 連結 : concatenate; joining-up copulation; structural connection; junction; anastomose; attachment; bond
  1. According to the system ' s operational order, this paper explains how to solve some problems in the correction system, for instance, successively displaying autocad files, finding datum mark, drawing compartmentalization, view recognizing, scale consistency, orientation consistency, processing simplified means and displaying correcting results this thesis is supported by northwestern polytechnical university " electronics teaching material budget

    本文依照批改系統的工作順序，闡述了解決盤蓋類作業批改系統的技術問題，重點表述了作業圖連續顯示、基準點定位、區域劃分、視圖識別、方向一致化、比例一致化、簡化畫法處理以及結果顯示方法的處理方法。
  2. Then following reality constituent of engine and connecting component interface, a nonlinear signal cylinder engine model has been created, though fire interval and fire order, a control - oriented four cylinders engine is build. following dynamometer is seen as load, performance of engine is simulated and researched under the condition of constant torque and speed, validation of the math and simulation model have been confirmed by comparison result between simulation with test result of engine performance simulation software dyno

    按照發動機的實際組成，根據各部件的介面類型連接模型庫中的部件，建立了單缸發動機非線性模型，在此基礎上，依據發動機實際發火間隔和順序，建立了面向控制的四缸汽油機模型，並以測功器為負載，通過恆轉矩和恆轉速方式進行了發動機性能模擬和研究，模擬結果和發動機動力性能模擬軟體dyno測試結果的對比驗證了數學模型和模擬模型的正確性。
  3. In the proposed join algorithms, although some algorithms such as mpmgin algorithm [ 23 ], outperform standard rdbms join algorithms, they perform a lot of unnecessary computation and i / o for matching basic structural relationships, especially in the case of parent - child relationships ; other algorithms such as the stack - tree - desc algorithm [ 24 ], represent the state - of - the - art in structural joins, however, they do not utilize indexed structures but sequentially scan the input lists. thus, i / o ' s can be wasted for scanning element that do not participate in the join, and join speed can be influenced

    另外，在所提出的演算法中，盡管有的演算法，如mpmgjn演算法[ 23 ]優于標準的rdbms連接演算法，但是該演算法為匹配基本的結構關系，特別是在父子關系情況下，執行了大量不必要的計算和佔用了大量的i / o資源；有的演算法雖然代表了結構連接演算法的先進水平，如stack - tree - desc [ 24 ]連接演算法，但是它沒有利用索引結構而是順序瀏覽輸入列表。
  4. Pseudo - static force testing of 1 : 2 scale models of a steel frame with dog - bone connections is first carried out in china in order to obtain elastic - plastic behavior of dog - bone connections steel frames under cyclic loading as well as to analyze collapse characteristic after structural ultimate strength has lost. the influence of dog - bone connection on the coming order of plastic hinges and failure characteristic of steel frame, and the influence of dog - bone ' s shape and position on the behavior of structure is obtained

    通過試驗考察了狗骨式連接平面鋼框架結構在循環荷載作用下的彈塑性性能;了解狗骨式連接對結構塑性鉸出現的順序以及結構破壞形態的影響;了解節點處與狗骨處應力發展狀況，探討狗骨削弱的形狀和削弱位置對節點性能的影響。
  5. This dissertation pays some attention on semantic matching between faceted - terms, uses fuzzy sets to describe the comparability of the two software components and represents two matching methods on the software component searches to improve the matching - rate, use the lib of components of engine testcell data management system as example to emphasize the arithmetic. component assemble is the process to assemble the components to form a system. this dissertation introduces three software assemble architecture, object connection architecture, interface connection architecture and plug and socked

    本文研究了對象連接式體系結構、介面連接式體系結構和插頭插座式體系結構三種軟體組裝體系以及黑盒、白盒和灰盒式的構件組裝方法，提出了基於中間件的構件組裝方法，還對中間件連接的簡化問題進行了探索，在通信順序進程（ csp ）基礎上，根據組裝的特點提出了4種構件組裝機制。
  6. An on - line minimum - variance estimator was developed for thrust acceleration applied to orbit transfer using discrete - time radar measurements. the mass - flow - rate of propellant was selected as a state variant, which was estimated by employing an integral state model and ekf filter. the variation equations for measurement vector to mass - flow - rate have been established to linearize the discrete - time measurement equations. the algorithm has applied successfully to maneuver process in commanding satellite into geo - stationary orbit. the results show that the algorithm developed here can monitor and determine whether engine works well or failure precisely and quickly during orbit transfer process

    飛行器軌道機動過程中，為跟蹤、定位機動目標和干預機動控制過程，需要統計處理離散的雷達觀測量實時估計推進發動機的推力，進而確定飛行器的瞬時軌道參數.本文所述演算法是該工程問題的探討和解決方案.文章建立了軌道機動過程中連續變質量運動模型和離散雷達量測模型，推進發動機的質量秒耗量作為表徵推力加速度的一個近似常量，應用擴展卡爾曼濾波對離散的雷達測量數據進行順序統計處理給出秒耗量的最小方差估計;文章詳細地推導了線性化量測模型的變分方程和觀測矩陣;模擬結果表明該演算法能快速、準確地估計推進發動機的質量秒耗量和向機動目標施加的實際推力
  7. Unless aggregating results is as simple as concatenating output files in any order, you must provide a separate program that will aggregate the results

    除非是聚合結果的工作簡單到只需要將輸出文件按照任意順序連接在一起，否則您必須單獨提供一個可以聚合結果的程序。
  8. In light of the simulative research results, three methods are applied to analyze some controversial problems in this kind of structural system ( such as the concrete pouring sequence of continuous ends, the applying sequence of pretensioned force, the removal of the temporary supports, the concrete pouring style of continuous ends, the optimization of constructional reinforcement and prestressed reinforcement ). some important conclusions are drawn : the concrete pouring sequence of continuous ends should be in accordance with the principle of " interval end " ; the removal of temporary supports is also on this principle ( opposite to traditional opinions ). at the same time, other problems such as the shrinkage and creep effects of concrete, the c racking and failure pattern, the optimization of reinforced bars and prestressed bars are also analyzed in detail

    在此基礎上，對于目前先簡支后連續結構體系中存在的一些有爭議的問題（如后連續端部澆築和后連續預應力張拉的順序、體系轉換中的臨時支座拆除順序、后連續端部澆築方式、后連續端部的預應力筋及普通鋼筋的優化等） ，我們分別運用三種方法進行了細致的模擬分析、研究，並得出了一些具有重要工程意義的結論：后連續端部的澆築順序和后連續預應力張拉的「隔跨」原則，臨時支座拆除的「隔跨」原則（此前人們一直認為「對稱澆注和對稱張拉」是最為合理的施工工序） ，混凝土的收縮、徐變對先簡支后連續結構體系的影響一般較小等。
  9. The readings listed below provide the foundation of this course. click on the links to view abstracts for the journal articles, where available. the readings are organized by lecture topic

    列在下面的這些閱讀書目是這門課的基礎。請點選連結來瀏覽期刊文章的摘要。這些書目已按照章節的順序排好。
  10. Govhk was designed in a way that you can use the keyboard exclusively to access all features and content

    例如每次按鍵盤上的tab鍵，指標便會順序跳到各超連結或輸入欄位上。
  11. The readings listed below provide the foundation of this course. click on the links to view abstracts for the journal articles, where available. readings are arranged by lecture

    閱讀以下資訊可建立對本課程的基本概念，點擊相關連結可閱讀期刊文章的摘要，推薦閱讀文章是依照授課順序來編排的。
  12. The readings listed below provide the foundation of this 961684035 course. click on the links togiew abstracts fo 572140 the journal articles, where availalble. readinns are arranhged by lecture

    閱讀以下資訊可建立對本課程的基本概念，點擊相關連結可閱讀期刊文章的摘要，推薦閱讀文章是依照授課順序來編排的。
  13. This system is the new type, in which the connection between the special - shaped column and concrete block is stronger than that of frame structure and the dark beams are located and its constructional sequence is brickwork first and placing columns second and concrete blocks are as bottom forms when beams are placing

    這種新型結構形式的主要特點包括：異形柱與砌塊為馬牙槎連接、墻體內含有暗梁、施工順序為先砌墻后澆柱、梁澆築時以砌塊為底模。
  14. After analyzing the characteristic of the parallel processing system, some problems about design missile - carrying processing system are pointed out ; network in the parallel processing system has become bottleneck and affect the performance of system, so the processing efficiency is analyzed in a multiprocessor system based on cluster - bus and some rules in designing the network in the multiprocessor system are brought out ; genetic algorithm is used for scheduling in the multiprocessor system, and a scheduling algorithm is described to suit arbitrary number of tasks, unequal task processing time, arbitrary precedence relation among tasks and arbitrary number of parallel processor, so that the schedule length will be minimized ; finally, an atr algorithm is mapped to a ring multiprocessor system, and a block diagram using dsp device is constructed. in chapter 4, the study is performed on real - time system hardware realization of atr. tms320c80 is selected as the kernel processor in multiprocessor system

    為此，對一種由常用的dsp晶元組成的多處理器系統的處理器利用率進行了分析，提出了多處理器系統互連網路設計的基本原則；本章使用遺傳演算法作為實現多處理器調度的工具，提出了一種新的任務調度演算法，該演算法主要是為了解決在任務數任意、任務計算時間不相等、任務前趨關系任意、以及任務間存在通信和考慮任務存貯器要求的情況下，如何優化任務在各個處理器上的分配和執行順序，使得多處理器系統總的執行時間最小；最後對一個目標識別演算法進行了硬體實現優化分析，根據分析結果，將演算法映射到由dsp晶元組成的環形網路連接的處理器拓撲結構上，得到了多處理器系統的原理框圖。
  15. The experimental research for beam - to - column connections of steel frame and the research influence on the steel frame is one subject of 2001 ' key research subject of ministry of construction of china, grant no. 01 - 2 - 085. researching for of beam - to - column connections under cyclic loading, for the factors effecting on the connections, for the deformation and failure character of connections, the arising order of plastic hinges and load - deformation hysteretic behavior of three pane frame under cyclic loading, the effect of semi - rigid connections on the frames, is the major purpose of this study

    本文進行的鋼框架樑柱連接的試驗研究和對框架的影響研究是建設部2001年科技攻關項目《新型空腔結構板輕鋼結構體系應用研究》的子課題，旨在研究樑柱連接在循環荷載作用下的滯回性能、影響連接的各種因素、連接變形特徵和破壞特徵；研究三榀平面鋼框架在循環荷載作用下構件塑性鉸出現的順序， p ?的滯回性能以及半剛性連接對框架側移以及塑性鉸出現順序的影響。
  16. The priority controls the order in which competing clients connect to a given endpoint ; higher priority channels connect before lower priority channels

    優先級控制相互競爭的客戶端連接到給定終結點的順序；高優先級通道先於低優先級通道獲得連接。
  17. Unless aggregating results is as simple as concatenating output files in any order, you must provide a separate sample client program that will aggregate the results

    除非聚合結果的工作簡單到只需按任意順序把輸出文件連接在一起，否則您必須提供如何聚合結果的客戶機程序示例。
  18. By adopting the calculating analysis method of elastic - plastic three - dimensional fem numeric simulation, this paper makes a simulation analysis on the structure stability of the shallow cover and unsymmetrically loaded parts in tongyoushan tunnel, mainly simulates the effects caused by different construction orders on surroundings and supporting structure stability, and it centers on the analysis on the weak part, the midwall in the lining of the connecting - arch tunnel

    摘要採用彈塑性三維有限元數值模擬計算分析的方法，對桐油山隧道淺埋、偏壓地段結構穩定性進行了模擬分析，主要模擬了不同施工順序對圍巖及支護結構穩定性的影響，重點對連拱隧道整體襯砌中的薄弱環節中墻進行了分析。
  19. Experimental research on tightening sequence of high strength bolts in end plate connection of steel structure

    鋼結構端板連接高強度螺栓施擰順序的試驗研究
  20. 4 pseudo - static force testing of 1 : 2 scale models including three steel frame two with semi - rigid connection and one with dog - bone connection are first carried out in china in order to obtain elastic - plastic behavior of semi - rigid connections and dog - bone connections steel frames under cyclic loading as well as to analyze collapse characteristic and the coming order of plastic hinges of the structure with different connections after structural ultimate strength has lost and conditions of stress development in the dog - bone, and the reason of the brittle failure in the rigid connections is obtained

    同時探討了連接形式對鋼框架性能的影響。 4進行了兩榀半剛性連接和一榀狗骨式連接平面鋼框架結構的擬靜力試驗。通過試驗考察了半剛性連接和狗骨式連接平面鋼框架結構在循環荷載作用下的彈塑性性能；了解了不同連接形式的結構在達到極限承載力后的破壞形態和塑性鉸出現的順序。
分享友人
分享到 Line

分享到臉書